Ultra Profiler decided to stop working. When I tap on it it doesn't come up and causes my device to freeze. The only thing to do is a soft reset. Any advice?????
Related
Soft Resets : What is lost on settings ?
Does one loose any settings when a soft reset is done ?
Battery or light off, registry, third party software settings ???
u would not lose any settings unless u soft reset just after changing something or receiving a text message of which the later would disappear when u soft reset.
To say it in clear words : Nothing get lost when you soft reset. But you should wait a bit when you change data (windows needs a moment to write it from ram into rom).
Data gets only lost if you do a hard reset
@lutzs, if your Universal freezes or crashes and you do a soft reset you may lose data - I have n the past when my Exec froze after email downloads over UMTS
uh i'm sorry i couldn't see this aspect, 'cause i have no Universal and i'm not downloading mail, and my Wizard haven't freeze or crashed yet :lol:
Figured out the culprit behind a minor annoyance I have with my dopod CHT9000... after soft reset, backlight timeout (battery) ALWAYS resets to 10-seconds. I prefer 1-minute.
Source of problem is software-based soft-resets:
Using either WisBar Lite's "Soft Reset" or PHM's freeware app reset.exe always resets to 10-seconds.
Using the hardware soft reset switch (insert stylus, push) ALWAYS leaves timeout setting untouched.
So long one-handed soft resets...
I'm using xda trion with PHM's soft reset program but don't have the problem you mentioned.
I can also confirm the issue but I'm not sure whether it's connected to the soft reset. I had the WM screen lock in focus which I think sets the backlight off time to 10 seconds but I'm not a 100% sure. Maybe the setting stays if you softreset while the screen lock is on.
im having the same issue but i dont use any of those programs... actually mine started right after the radio upgrade to 1.20... i havent installed any new programs, just using the same setup... only thing i did was downgrade to the 1.04 bootloader only then flashed 1.20 radio.. i can go and change the time out, but as soon as it does that it resets back to 10 seconds
I am having problem with my jasjar. About half the time when the device is soft reset it comes up with a "no service" icon even in an area with active service. I cannot make a call at that time. Even I cannot put the phone into `flight mode' or turn off the phone connection using the wireless manager. Further soft reset works sometimes but not always.
Looks like a software bug as if I do a hard reset. It comes up fine. Could you please let me any fix available for this issue. I am fed up of hard resetting.
Thanks in anticipation
Arun
Try flashing original shipped rom.
Hey guys, I discovered that the phone application crashes if I talk on the phone for more than an hour in a row. I repeated the experiment several times and got the same thing : gwes.exe has encountered an error and needs to be closed... The screen will not respond anymore nor the softkeys, You should open the back cover and reset it by pressing the red buttons. I did read several threads about gwes.exe memory leak and the possibility that the application may eat system resources with time.
I come from a Hard reset.. Just fresh stock ROM and tried to repeat the process.. Again, system crashes. Any idea ?
i got a new hd2 today. it works fine, the only problem is that i never get the chance to finish that first-startup-assistent that appears after starting for the first time or hard resetting (when using official roms). it somehow starts in the background, but i cannot get it in the foreground or kill it in the task manager; the only time i get a glimpse on it is when i power off the phone. that is really annoying because it enables my wifi on every soft reset.
any solution for this?
open comm manager and switch to flight mode, you should find the wizard comes to the front and you can finish it.
worked, thanks!