Database Users

AdaptROM unable to connect

I can't figure out why AdaptROM cannot connect to my XDA. I am running Active Sync 3.7 on Windows XP pro. I have Norton Anti-Virus and several other applications that are always running. I have tried disabling all of them and it didn't make any difference. I am running the new T-Mo WME2003 and the new 6.4 radio stack on my SX-56. It syncs just fine with the PC and has a pairing relaitionship set up.
Neither AdaptRom or any of the .exe upgrade programs, nor Mobipassword can connect to my XDA. Anyone have any ideas why this might be? I have tired using a serial cable and the USB cradle and changing the connection settings. When I originally upgraded it way back when to the ATTWS SX-56 PPCE2002 rom it worked just fine. I hadn't tried it since.
The only thing I can think of is a registry setting being hosed up. I am going to try uninstalling active sync and reinstalling and see if that makes a difference.
Suggestions will be greatly appreciated.

I tried removing and reinstalling Ative Sync and it didn't have any effect. Both programs show an Active Sync error cannot connect to device.
It's as if something must have the port tied up.

Same Here
I upgraded to the 4.00.10 rom on my xda but I can't get either adaptrom or Programme A to run so that I can downgrade the device or reflash it.
Any help would be appreciated as I don't have access to an sd card writer.

Re: Same Here
qtzar said:
I upgraded to the 4.00.10 rom on my xda but I can't get either adaptrom or Programme A to run so that I can downgrade the device or reflash it.
Any help would be appreciated as I don't have access to an sd card writer.
Click to expand...
Click to collapse
I had the same problem U had before. the best solution is to buy a SDcard reader to do the job.
Read more from here http://xda-developers.com/forum/viewtopic.php?t=1717.
Good luck :wink:

I noticed that the 3.x CE developer environment also cannot connect
to a 2003 device.

XDA developer Itsme said:
I noticed that the 3.x CE developer environment also cannot connect
to a 2003 device.
Click to expand...
Click to collapse
Could this mean that some supporting files are missing from the T-Mobile rom? If somebody could get a list of all the files that are different between the 4.00.05 and the 4.00.10 roms then it might point to something...

You can try another hard reset of your xda. That happened to me about a month ago and a hard reset fixed it. Unfortunately I had to create a new relationship etc.. - Jim

Active Sync wont start :-(

Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n

NiklasM said:
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
Click to expand...
Click to collapse
Everything all right
Are u using the same version of Active sync that came bundled with your device?
If yes TRY THE UPDATED VERSION
If NO, Try the PREVIOUS VERSION.
maybe there is something wrong in one of the connecting Pins In the cradle/Socket of the cable

How do I update software in the device, when I cannot sync?
Ive tried different software in my PC. None worked.
Im not sure its a HW-failure in the cable, since I tried different ones..
It could be in the device, Im not sure how to check though.
/n

What version of ActiveSync has worked for you up until now?
Try an older version of AS:
3.8: http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx

Oh I solved it....by making a hard reset - SURPRICE!
What a crap device this is...

That almost always does the trick....sometimes my MDA II will act really weird and a soft or even a hard reset will fix a seemingly incompatible app.

Polaris Connection Problem

Hi,
Two months ago I've upgraded the ROM of my Polaris. At beginning I've got some problem in use ActiveSync (windows XP) or Mobile Center (Vista), after two or three try it worked. But now there is no way to connect the Polaris with any computer (I've tried 4 different computer with different version of Windows). I always get the message that the USB device is not recognized. Even Bluetooth does not work. I've tried all methods and hard reset the device several times, install and uninstall ActiveSync/Mobile Center no way to get connected. The situation become worst because the phone stopped working. So, please, could someone help me in trying to connect the Polaris with the PC?
The ROM that is installed is:
R 1.58.21.23
G 25.65.30.04H
D 1.52 PQ015
Thanks,
Adenilson

Adenilson said:
Hi,
Two months ago I've upgraded the ROM of my Polaris. At beginning I've got some problem in use ActiveSync (windows XP) or Mobile Center (Vista), after two or three try it worked. But now there is no way to connect the Polaris with any computer (I've tried 4 different computer with different version of Windows). I always get the message that the USB device is not recognized. Even Bluetooth does not work. I've tried all methods and hard reset the device several times, install and uninstall ActiveSync/Mobile Center no way to get connected. The situation become worst because the phone stopped working. So, please, could someone help me in trying to connect the Polaris with the PC?
The ROM that is installed is:
R 1.58.21.23
G 25.65.30.04H
D 1.52 PQ015
Thanks,
Adenilson
Click to expand...
Click to collapse
Repair you Polaris. Its hardware error with connection jack.

Ok,
I was wondering that could be a hardware problem, but expected that could solve the problem by using another ROM version. In fact, I've a big problem... Polaris is not sold in my country and I has no technical support for it . I brought it abroad. Anyway, thanks for your reply
Adenilson

needed real help for upgrading 6.5

when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !

i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?

where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.

it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!

error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy

hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???

can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.

hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*

hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it

maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.

flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.

Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.

kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.

It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)

KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.

HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.

sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me

aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!

Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers

Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.

HD2 WP7 to Mango problems - 1198 error

Hello all, I have a T-Mobile HD2 with WP7 on it. I tried using the Mango update from elfinazz but I get the following error when running DWI.EXE.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
HD2 has been running WP7 very stable for months, with Live services activated. When I originally put WP7 on it I installed MAGLDR 1.12. Today when I got the above error, I flashed it to 1.13 with no problems, so I think there might be a communications problem with DWI.EXE. I have also tried it on a different computer with the same results. I even tried downloading CustomRUU.exe and ran that from the folder.
When I connect my HD2 to USB, the message in the white area changes from serial to USB, so the phone is seeing the USB connection, but the computer doesn't. Also, if I run DWI.EXE and don't connect the HD2 I get the exact same error.
I am running it in administrator mode. Allow USB connections in Mobile Device center was checked at first, then I unchecked it. I can't find specific steps for upgrading from the original WP7 release to Mango, so I assume I am missing a step. I have been trying to get this working for a couple of hours now with no luck, any help would be appreciated.
Thanks!

Solution ..
Hi, I had the same problem, don't worry its so easy to solve it
Reinstall or install depends the case the Windows Mobile Device Center, the same one you used with WM6.5 and the problem will be solved, why ? because this problem its a driver problem, if you are using windows 7 you need the drivers of your mobile, and this drivers will be given in Windows Mobile Device Center once you installed connect the mobile, will start to recognize the phone and drivers and then try to flash again ....
I had same problem and solved by doing this

Look at me desperate LOL
http://forum.xda-developers.com/showthread.php?t=1131533
and answer from jorge_jomi almost at the end ...

Hey
Ill give that a try thanks jorge