Hello all, I have a T-Mobile HD2 with WP7 on it. I tried using the Mango update from elfinazz but I get the following error when running DWI.EXE.
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (1198)
HD2 has been running WP7 very stable for months, with Live services activated. When I originally put WP7 on it I installed MAGLDR 1.12. Today when I got the above error, I flashed it to 1.13 with no problems, so I think there might be a communications problem with DWI.EXE. I have also tried it on a different computer with the same results. I even tried downloading CustomRUU.exe and ran that from the folder.
When I connect my HD2 to USB, the message in the white area changes from serial to USB, so the phone is seeing the USB connection, but the computer doesn't. Also, if I run DWI.EXE and don't connect the HD2 I get the exact same error.
I am running it in administrator mode. Allow USB connections in Mobile Device center was checked at first, then I unchecked it. I can't find specific steps for upgrading from the original WP7 release to Mango, so I assume I am missing a step. I have been trying to get this working for a couple of hours now with no luck, any help would be appreciated.
Thanks!
Solution ..
Hi, I had the same problem, don't worry its so easy to solve it
Reinstall or install depends the case the Windows Mobile Device Center, the same one you used with WM6.5 and the problem will be solved, why ? because this problem its a driver problem, if you are using windows 7 you need the drivers of your mobile, and this drivers will be given in Windows Mobile Device Center once you installed connect the mobile, will start to recognize the phone and drivers and then try to flash again ....
I had same problem and solved by doing this
Look at me desperate LOL
http://forum.xda-developers.com/showthread.php?t=1131533
and answer from jorge_jomi almost at the end ...
Hey
Ill give that a try thanks jorge
Related
hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!
THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....
your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??
i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?
i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!
SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!
Hello
I've got a problem. I want to flash my ROM to WM6.5.
I connectet my Phone with Vista over USB-Port.
The ROMUpdateUtility.exe start the GUI.The phone disconnect from Vista and the Install GUI shows me after few seconds the ERROR 260, that my Phone ist not connectet.
On my Phone I see the three coulored Monitor. On the left lower site is written "USB".
I tried to hold the connection with Vista ( i startet the Camera or other Applikation ) but the same problem.
Whenever i start the ROMUpdateUtility.exe the same. Disconnect and never connect again.
What can i do, that my phone stay connectet with Vista, so the Install GUI can make his work?
thx AcidC ( and sorry for my bad english)
run artemis uspl first
remove any sd card if u have
and then try it
Hi,
we tried with and without microSD card and or sim card.
The real problem is the connection which is interrupted and doesn't rebuild.
Independent of trying to flash the WM6.5 or USPL.
Silly question, but you never know..Do you have Windows Mobile Device Center installed in your PC and is your device connected to it? It is the "Activesync for Vista". The three coloured screen is normal, it is called Boatloader. After that you should have a progress bar of what you are updating (rom,radio..uspl..etc) on both PC and Artemis. In my case, when i got error [260] it's always because I forget to remove the SD card. I know you already tried this but keep it away from device when you flash.Your problem is maybe about Vista Drivers for Artemis, there are threads concerning it. Before you investigate further,try to install/reinstall Windows Mobile Device Center, change USB port and flash with a freshly booted PC. Hope you'll get the magic.
P.S. USPL flash is ABSOLUTELY THE FIRST THING TO DO!
Workaround: try to flash with a PC running XP
You need RUU for vista
Ok. I tried it again, but like u said, i need USPL and WM6.5 RUUs for Vista. But can u help me? I don't find somthing :-(
I consider myself beeing quite lucky for not having needed this even if I'm on Vista,hope helps for you: http://forum.xda-developers.com/showthread.php?t=337097
Use these drivers for Vista:
http://forum.xda-developers.com/attachment.php?attachmentid=33662&d=1169888879
Yeahhh ... Now it works. Thank U all. And now i understand. I had to update my MobileSyncDriver in Vista. Thank U very much
Hi all, I'm a total noob at this but I've read every possible thread about the Tmous 1024 HD2 concerning flashing hspl2_1024 and the error code that says failed usb connection.
My problem is a bit different from the others' problems but I'll try to be as thorough as I can.
Let me start off first by listing my phone and all of its "stats"
TMOUS HTC HD2
Ram - 576MB
Flash - 1024MB (I'm guessing that this is the ROM size)
OS version - 5.2.21889
Manila Version - 2.5.20121412.1
ROM version - 2.10.531.1 (82076) WWE
Radio Version - 2.08.50.08_2
SPL - 2.08.0000
I'm at the very beginning of the process (flashing the hspl). I've read mskips tutorial backwards and forwards several times.
The first problem is that WDMC doesnt pop-up when the phone syncs with the comp. Matter fact, the green WMDC screen has never shown up on my comp., not even when I go into the start menu and click WMDC (I've tried every usb port on the comp and have visited microsofts website and downloaded and installed their WMDC a few times). All that comes up when I click WMDC is the connection settings that says Device connected.
The second problem is that when i click the next screen on the hspl2 install window, I get an error window that says something about rapi.dll not being able to be found (i get that error twice and then it seems to resume installing).
Following that, I get the usb failed connection error (a couple minutes later) and hspl2_1024 closes down. My HD2 never goes to the tri-color bootloader screen. I've tried going into the bootloader screen prior to installing hspl2_1024 but that didnt work either.
I'm completely stumped and have searched this forum for the answers to no avail. I've done a hard reset and tried again, but that didnt work. The only thing I havent tried is putting the hspl2 on my sd card and doing it from there, which from what I've read over the past few days is basically considered a no no.
I need help and all help would be greatly appreciated.
Would have pictures but the forum wont allow me to post any.
Flashing TMO HD2
Back up all data on your phone before flashing.
This is what I did and worked.
Assuming you purchased the HD2 in the US from TMOBILE.
1. Change your sync settings on your phone to use Active Sync not the usb.
2. Plug in your device to your computer. Hopefully it recognizes your phone. (If it doesn't then you might need to re-install the windows mobile device center)
3. Once connected run HSPL2_1024. Follow instructions there and should connect. Your phone should have the RGB screen. HSPL program will prompt you which version you want to install. I used 1.0 as it was the only selection
4. When completed it should say something with "HACKED"
5. Reset your phone by taking out the battery for 5 seconds.
6. Once it's powered on it should connect through Windows Mobile Device Center.
7. Now it's time to flash your custom ROM. Hopefully you have the CustomRUU.exe file together with the nbh file.
Funkyrocemz said:
The first problem is that WDMC doesnt pop-up when the phone syncs with the comp. Matter fact, the green WMDC screen has never shown up on my comp., not even when I go into the start menu and click WMDC (I've tried every usb port on the comp and have visited microsofts website and downloaded and installed their WMDC a few times). All that comes up when I click WMDC is the connection settings that says Device connected.
Click to expand...
Click to collapse
Mine never comes up either,
click start and start typing 'windows mobile .....' in teh search box and you should see it come up in the list. (round green icon)
either right click that and choose pin to start menu or drag it to the desktop as a link, then you can start it manually. You should find that once you are using it, it starts to come up on its own 'most' of the time.
never mind it seems my computer is to blame... issue solved!
Hello all,
Im trying to flash a new NAND ROM. The Mdeejay gingerbread rom.
But i cannot get an sync connection with my phone.
I flashed my first nand rom threw windows active sync, but obviously i dont have winmo no more.
Im currently on Gauners Desire HD NAND build.
I have installed the htc sync software (with anti-virus disabled), and when i connect my phone and set the connection to HTC sync, its starts searching for sync on my laptop. This takes a while and after that it basicly tells me that htc sync cannot be found on my laptop This happens when im actually looking at the htc sync software on my laptop.
Anybody has an idea what could be the problem?
Thanks
you have try htc sync for htc desire not hd2 sync soft
download from wwwhtc.com/www/SupportDownload.aspx?p_id=324&cat=3&dl_id=982
I am using the software for the htc desire.
I have latest htc sync software installed.
Anyone else?
Windows version installed? XP, Vista, 7, 32b/64b? Need more info.
First thing you can try, exit htc sync on your computer (Make sure you right click the taskbar icon, and choose exit. now connect phone by USB, when your phone asks what type connection, choose htc sync, the phone will now look for the software, while its looking, run htc sync, if all goes well, it should find it.
If that doesnt work, then my first sentence stands.
Ok i have manged to get a sync now, edditing some stuff in MSconfig
(im on windows 7 ultimate) So now i have my connection, but as soon as i try to update to MAGLDR111 threw romupdateutility.exe
it says it cant find a connection, anybody have any ideas?
Nevermind, got it this thread can be closed.
Thanks guys!
Hi guys sorry but before you close the thread, I am having the exact same problem.
I flashed my first NAND Rom from Cotulla which is working brilliantly so far. However I just wanted to try another ROM but I cant get my phone to SYNC with the computer. I am using the latest version of HTC Sync for Desire
Please note that I was previously able to sync just fine..
Now when I connect the phone to the computer it says CONNECTING.... for around a minute then it just says UNABLE TO FIND HTC SYNC ON YOUR PC.... even though i have HTC Sync Installed just fine.
I have Windows XP. I have tried restarting computer and phone. Also uninstalled and reinstalled HTC Sync several times but to no avail.
Please could someone help me.... or the original poster please tell me how he sorted out the problem
You dont need the sync i found out.
If you go into the normal bootloader (hold down volume button and powerbutton)
Connect your usb, wait for the bootloader to say USB, then update to MAGLDR 1.11, and done
then just (as usual) open the 4th option in the MAGLDR menu, and flash your new rom.
Have fun
I have magldr 1.11 and I have a problem with syncing my hd2. I go into magldr menu, choose no. 4, says usb...usb, but when I try to flash the new rom, it says error, no connection. Is there a solution for this?
Sent from my HTC HD2 using XDA App
I installed the magldr 1.12 and installed the WP7 successfuly. but when i try to flash a nand build android rom i get this error:
Error happen
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (723)
I am using windows xp.
I have an tmous hd2
magldr works like a charm for the wp7 flash.
I did search and tried all the suggestions i could find.
reformated my sd card with sdformat 3.0
i tried a couple diff. roms even the dft one. and cmylxgo
i went back to stock wm6.5.
task 29
installed magldr 1.11
installed diff. radios
removed my sdcard
i probably tried more but i can remember, ive been messing around with it for a while now.
Im going to go back to wp7 for now untill i find a wm6.5 rom i like.
Anybody have any more suggestions? would be much aperciatated. thanks in advance.
http://forum.xda-developers.com/showthread.php?t=926895
Same problem, but I've give him some advice. It worked for me, but not him. It's worth a try though.
Ok, thanks! that solved it.
I had that thread open in a new tab. i posted my thread at the same time you posted to disable it in active sync not task manager. sorry about the extra thread.
But i did try to disable active sync in the task manager.
-----------------------------------------------------------------------------
Just had to disable usb connections in active sync.
open up active sync,
click on file,
connections,
uncheck the box that says allow usb connections. no WM needed. at least not for me.
----------------------------------------------------------------------
That should realy be in the MAGLDR thread. for us xp users.
Also, the program for cracking the windows live requires Vista or W7.
And to install zune you need at least sp3 on xp. i guess im a little out of date.
Thanks again.
Windows 7 usb not recognised
I am having the same problem in windows 7,wondering if ive bricked the phone.I unchecked active sync in wm but still the pc does not recognise the phone.Is there any way out of this.I am just getting wait USB...USB so I must be doing something right any help much appreciated.Is there any way of recovering to Windows mobile from flasher mode.