Database Users

Active Sync wont start :-(

Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n

NiklasM said:
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
Click to expand...
Click to collapse
Everything all right
Are u using the same version of Active sync that came bundled with your device?
If yes TRY THE UPDATED VERSION
If NO, Try the PREVIOUS VERSION.
maybe there is something wrong in one of the connecting Pins In the cradle/Socket of the cable

How do I update software in the device, when I cannot sync?
Ive tried different software in my PC. None worked.
Im not sure its a HW-failure in the cable, since I tried different ones..
It could be in the device, Im not sure how to check though.
/n

What version of ActiveSync has worked for you up until now?
Try an older version of AS:
3.8: http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx

Oh I solved it....by making a hard reset - SURPRICE!
What a crap device this is...

That almost always does the trick....sometimes my MDA II will act really weird and a soft or even a hard reset will fix a seemingly incompatible app.

Can't sync Qtek 9000 with Vista Ultimate

I just installed Windows Vista Ultimate, and then installed windows mobile device center. But it dosen't do nothing, when I connect my PDA to the USB, the first time it told me that was installing the drivers for the PDA, but it didn't recognize my Qtek 9000, insted it just installed a network card with the name "Microsoft Windows Mobile Remote Adapter", when its finished I started the Mobile device center, but nothing happens.
I try'd lots of times, but nothing. I reinstalled all, but nothing.
Anyone has any6 soluction.
Thanks

Had the same problem.
First, make sure your device is connected.
Go to control panel - network - and click manage network connections. Find your device connection and click properties - Tick all the items there... that should do it.

zuza said:
Had the same problem.
First, make sure your device is connected.
Go to control panel - network - and click manage network connections. Find your device connection and click properties - Tick all the items there... that should do it.
Click to expand...
Click to collapse
I have made all that, but still nothing happens.

RRibeiro said:
I just installed Windows Vista Ultimate, and then installed windows mobile device center. But it dosen't do nothing, when I connect my PDA to the USB, the first time it told me that was installing the drivers for the PDA, but it didn't recognize my Qtek 9000, insted it just installed a network card with the name "Microsoft Windows Mobile Remote Adapter", when its finished I started the Mobile device center, but nothing happens.
I try'd lots of times, but nothing. I reinstalled all, but nothing.
Anyone has any6 soluction.
Thanks
Click to expand...
Click to collapse
Have you updated the ROM at all? Which are you using. Also, are you using the original cable?

apd said:
Have you updated the ROM at all? Which are you using. Also, are you using the original cable?
Click to expand...
Click to collapse
I'm using WM6 Rom 2.01.07 PDAViet, with original cable.

RRibeiro said:
I'm using WM6 Rom 2.01.07 PDAViet, with original cable.
Click to expand...
Click to collapse
I haven't used a PDAViet ROM for some time. I did have a problem getting WMDC to recognise my replacement G4 after I upgraded it to a beta of Jwtight's 2.02. Reflashing the ROM solved the problem. Three other things (1) are you connecting through a USB hub / have you tried a different USB port (2) have you checked that USB connections aren't disabled in WMDC and (3) Have you got the latest version of WMDC - it was updated about a month (or so) ago.

apd said:
I haven't used a PDAViet ROM for some time. I did have a problem getting WMDC to recognise my replacement G4 after I upgraded it to a beta of Jwtight's 2.02. Reflashing the ROM solved the problem. Three other things (1) are you connecting through a USB hub / have you tried a different USB port (2) have you checked that USB connections aren't disabled in WMDC and (3) Have you got the latest version of WMDC - it was updated about a month (or so) ago.
Click to expand...
Click to collapse
1 - no, i'm connected directly to the pc, and i try'd all ports available;
2 - how can I check that? My WMDC dosen't do nothing, don't even start and I unistalled and installed again many times;
3 - I think yes, because I downloaded it from Microsoft.com, and made all updates available in Windows Update.
I think I'm going to try and update my QTEK with a diferent ROM, maybe the lateste WM6 2.02.00.

RRibeiro said:
1 - no, i'm connected directly to the pc, and i try'd all ports available;
2 - how can I check that? My WMDC dosen't do nothing, don't even start and I unistalled and installed again many times;
3 - I think yes, because I downloaded it from Microsoft.com, and made all updates available in Windows Update.
I think I'm going to try and update my QTEK with a diferent ROM, maybe the lateste WM6 2.02.00.
Click to expand...
Click to collapse
I would. Also sounds like you may have a problem with WMDC, which is not particularly reliable at the best of time, IMHO.

apd said:
I would. Also sounds like you may have a problem with WMDC, which is not particularly reliable at the best of time, IMHO.
Click to expand...
Click to collapse
Is there any way to clean WMDC completly from my system?
I try'd uninstall, but it seams that some leftovers stay behind.

unknown device

Hi
I have some problem whit synchronizing my p4350.
everytime when I connect my phone to my notebook (usb) vista says that he has found a unknown device.
I already reinstalled windows mobile center (2x) (with rebooting).
But my notebook still doesnt find my phone.
This is really annoning.
I am using the touch-it rom
Could someone help me?
greetings

Try changing the USB Port you use.
Also download and install the latest Windows Mobile Center v6.1 from Microsoft and try again.
Regards

also these 2 things doesn't work

anyone??
?

I still trying to connect my p4350 to my notebook but it just doesnt work.
I tried another pc and that worked :S
I also tried severel usb ports but they all give thesame alert, that my device is unknown :S

Symantec pcAnywhere mobile on HD

Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel

Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.

Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.

I have been using PCAnywhere for months with no problems after many soft resets.

mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....

I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install

htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!

This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)

Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.

kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums

My iPAQ 612 is not recognized on computer.

My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.

apichaix said:
My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.
Click to expand...
Click to collapse
Hi,
What ROM are you using now ? Normally, if you install AS 4.5, it will wait for a PPC to connect and then make a new profile etc. Unless something went wrong with your ROM-update.
For the latest ROM from HP, look here
Dirk

try using another usb-cable