Can't install Stock ROM on SM-P619 - Samsung Galaxy Tab S6 Lite Questions & Answers

Hello there.
We have purchased a fleet of P619 for our company, which we need for Remote Desktop and VPN. Sadly the VPN in the Android 13 Version of ONEUI does not have the option for user+password with IPSec Xauth PSK. So we have decided to flash stock rom for the region of the device, in this case XEH for Hungary. We have unlocked the bootloader, turned off OEM lock, and made sure we had the right ROM. The error we get from Odin3 is:
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf
<ID:0/008> xbl.elf
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
In the bootloader, the only things that I would consider a hinderance would be Sercure Download aswell as Qualcomm Secureboot being enabled. Although I do not know if that will actually cause a failure.
After the error in Odin the tablet shows: "SW REV CHECK FAIL : [abl]Fused 3 > Binary 1.
Thanks in advance!

Related

[Q] Recovery Problem Tab2 10.1 GT-P5100

Hey,
my GT-P5100 came with 4.0.3 (German, no Branding, no Provider) some weeks ago.
i start getting Root with http://forum.xda-developers.com/showthread.php?t=1686514
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
everything works, Root Access, Backup/Recovery but no CM9
so i decide to use http://forum.xda-developers.com/showthread.php?t=1722063
when i try to flash "ClockworkMod Recovery" i always get this Error:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> ‹
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did several different Downloads, always the same...
the first "Recovery" also called " ClockworkMod Recovery" ???
anybody any Idea what's different?
I try also go back to Stock Rom 4.0.3 and 4.0.4 everything works, but i can only use the 1st method... with this i can Install any ROM for my Device,
but not CM9 ???
When itry to install CM9, i always get this Error:
...
(Status7)
Installation aborted.
Thanks
btw. my Counter"Custom Binary Download" shows already 32counts
ah, OK,
nobody has any Idea, is nobody here?
I would post my Problem at "Development-Section" but i can't (to less posts)
I try to ask the question again: Can anybody tell me the Different between the 2 "recovery's"
Please don't flash it, when u don't know what's inside !!!
1st http://forum.xda-developers.com/attachment.php?attachmentid=1113241&d=1339079225
2nd http://teamhacksung.org/download/samsung/GT-P5100/GT-P5100_ClockworkMod-Recovery_5.5.0.4.tar
my Problem, only the 1st works at my Device, but i want the 2nd :crying:
1st seems not to be the right one
Thanks for your advice
SG+

Needing help with my (now bricked) Galaxy s5

So I have been having alot of trouble trying to get my S5 to have root capabilities and ended up soft bricking the thing. I have Odin V3.09 and the stock firmware and it keeps giving me the chain of messages everytime I try to reflash it:
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone is A Galaxy S5 verizon version (SM-G900V) running on 5.1 (I believe). I use this phone everyday and need help ASAP.
Verizon bootloader will be locked, I read someone had unlocked it, but never saw anything more come of it
btw919 said:
So I have been having alot of trouble trying to get my S5 to have root capabilities and ended up soft bricking the thing. I have Odin V3.09 and the stock firmware and it keeps giving me the chain of messages everytime I try to reflash it:
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone is A Galaxy S5 verizon version (SM-G900V) running on 5.1 (I believe). I use this phone everyday and need help ASAP.
Click to expand...
Click to collapse
Before you do this open your phone, take battery out and note down your serial number.
What I always try at this stage is Kies. Download Kies 3, click Tools > Firmware Upgrade/Initialization and it will ask for your model number and serial number.
Go through with it. It should download the latest stock firmware for your device and it should ask you to plug your phone in and put it in download mode & press next.
This method has recovered me from the worst situations so I hope it works for you!
Shaolin36 said:
Before you do this open your phone, take battery out and note down your serial number.
What I always try at this stage is Kies. Download Kies 3, click Tools > Firmware Upgrade/Initialization and it will ask for your model number and serial number.
Go through with it. It should download the latest stock firmware for your device and it should ask you to plug your phone in and put it in download mode & press next.
This method has recovered me from the worst situations so I hope it works for you!
Click to expand...
Click to collapse
It worked! Thanks for the help!

J320AZ Odin flash stuck on sboot.bin

Here's what happened. I got this device (Samsung Galaxy Amp Prime J320AZ) from cricket through my sister who resides in the US. On connecting the device to WiFi, an update was available which I gladly installed. Unfortunately, the update messed the camera up and all I get is a black screen. I decided to buy a unlock code which worked seamlessly but then I noticed some settings were missing eg. Network band selection 4G/3G/2G. I did a factory reset hoping to solve it that way but only to no avail. I then tried to downgrade to stock rom (J320AZTUU2APJ2) through Odin 3.1203 from J320AZTUS2AQA1 which I received via OTA. But this didn't work either. The logs below. Then out of desperation, I flashed three out of the 4 firmware files in AP+CP+CSC in order to avoid the sboot.bin file in the BL firmware file. This completed successfully but now the phone no longer reads the sim card and has no menu for mobile networks. Now I just want my mobile network back. Any suggestions please.
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Look here for current odin files

Unable to flash ANY rom through ODIN: Complete(Write) operation failed.

Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Hi,
you need to flash only the latest ROMs where bootloader version is 4, i.e., something as G950FXXU4CRI5 where the 5th letter from right is 4.
kyleblue09 said:
Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Click to expand...
Click to collapse
Try downloading the latest firmware for your phone and region, if you still get sboot.bin failure its probably due to the USB cable you are using, I swapped my USB cable and now my S6 is happily flashing.
Tyr flashing without CSC.
You can flash CSC later I think.

please help people my S7 edge is in a weird state!!!

let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Abdel3-Rahman9 said:
let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Abdel3-Rahman9 said:
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Click to expand...
Click to collapse
Flash correct firmware , your bootloader is version 7 and you are trying to install a really old firmware of v2 bootloader .. you cannot downgrade bootloader
Edit : your post is in the wrong forums too, this is for guides not Q/A
Sent from my S7 Edge using XDA Labs

Categories

Resources