Here's what happened. I got this device (Samsung Galaxy Amp Prime J320AZ) from cricket through my sister who resides in the US. On connecting the device to WiFi, an update was available which I gladly installed. Unfortunately, the update messed the camera up and all I get is a black screen. I decided to buy a unlock code which worked seamlessly but then I noticed some settings were missing eg. Network band selection 4G/3G/2G. I did a factory reset hoping to solve it that way but only to no avail. I then tried to downgrade to stock rom (J320AZTUU2APJ2) through Odin 3.1203 from J320AZTUS2AQA1 which I received via OTA. But this didn't work either. The logs below. Then out of desperation, I flashed three out of the 4 firmware files in AP+CP+CSC in order to avoid the sboot.bin file in the BL firmware file. This completed successfully but now the phone no longer reads the sim card and has no menu for mobile networks. Now I just want my mobile network back. Any suggestions please.
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Look here for current odin files
Related
Hey Everyone! Okay so here's what I got, I (very stupidly) Rooted my AT&T (I337) Galaxy S 4. Now that I was all fine until I used a flashing script (AS we have no custom recovery) to flash a "working" Google Wallet package. After I rebooted I would get "NCF Service as stopped responding". I managed to install SafeStrap but I couldn't seem to get anything there. SO I thought "Well let me just reflash to stock" so I tried KIES but KIES detects the latest firmware to be 4.2.2, AS we know it's not, and Samsung made MF3 rather impossible to downgrade. So I got the MF3 files used at BestBuy from here [http://forum.xda-developers.com/showthread.php?t=2502003]. So I put my phone into Download Mode, Open up ODIN and select the platform software in the PDA section and click start. Odin will start flashing and it goes almost all the way through but at the end I get the error FAIL! (Auth). I shall post the code below:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> recovery.img
<ID:0/007> persdata.img.ext4
<ID:0/007> system.img.ext4
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Any help? :/
I want to unbrick a rooted Sprint Samsung Galaxy S4 and I have the stock MDC and MJA roms. I can't find a pit file to allow for repartition. Where can I locate this?
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks.
[email protected] said:
I want to unbrick a rooted Sprint Samsung Galaxy S4 and I have the stock MDC and MJA roms. I can't find a pit file to allow for repartition. Where can I locate this?
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks.
Click to expand...
Click to collapse
I don't think you need the pit file. The error you are showing is from trying to Odin a stock tar that is older than mja. Just Odin either mja or mk2 and it should complete. You cannot Odin MDC after the phone has been updated.
Sent from my icrap 2 using Tapatalk HD
I was trying to fix my IEMI problem by flashing in COMBINATION_FA60_G935FXXU1AQI2_CL7964511_QB14932435_REV00
and here is the log from odin:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> param.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone plz tell me the problem?
What bootloader version do you have now?
I'm not sure how you would fix IMEI issues with combination firmware as most you can do is wipe EFS (Which should never be done) which means you lose your IMEI until it gets reprogrammed.
The only thing you can try is reflashing stock samsung Firmware, other than that IMEI would need to be reprogrammed by flashing box.
I got the same exact log with Samsung J3 Pro... I'm trying to bypass/remove FRP because I can't use that talkback trick... Anybody know?
Answer, apparently I was using v4 bootloader, thought I was on most recent, but I wasn't. Had a hard time finding newer/current firmwares for my device, but was able to find v5, flashed and went perfectly
So I'm trying to reset my phone as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Abdel3-Rahman9 said:
let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Abdel3-Rahman9 said:
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Click to expand...
Click to collapse
Flash correct firmware , your bootloader is version 7 and you are trying to install a really old firmware of v2 bootloader .. you cannot downgrade bootloader
Edit : your post is in the wrong forums too, this is for guides not Q/A
Sent from my S7 Edge using XDA Labs