let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Abdel3-Rahman9 said:
let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Abdel3-Rahman9 said:
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Click to expand...
Click to collapse
Flash correct firmware , your bootloader is version 7 and you are trying to install a really old firmware of v2 bootloader .. you cannot downgrade bootloader
Edit : your post is in the wrong forums too, this is for guides not Q/A
Sent from my S7 Edge using XDA Labs
Related
Hey,
my GT-P5100 came with 4.0.3 (German, no Branding, no Provider) some weeks ago.
i start getting Root with http://forum.xda-developers.com/showthread.php?t=1686514
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
everything works, Root Access, Backup/Recovery but no CM9
so i decide to use http://forum.xda-developers.com/showthread.php?t=1722063
when i try to flash "ClockworkMod Recovery" i always get this Error:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> ‹
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did several different Downloads, always the same...
the first "Recovery" also called " ClockworkMod Recovery" ???
anybody any Idea what's different?
I try also go back to Stock Rom 4.0.3 and 4.0.4 everything works, but i can only use the 1st method... with this i can Install any ROM for my Device,
but not CM9 ???
When itry to install CM9, i always get this Error:
...
(Status7)
Installation aborted.
Thanks
btw. my Counter"Custom Binary Download" shows already 32counts
ah, OK,
nobody has any Idea, is nobody here?
I would post my Problem at "Development-Section" but i can't (to less posts)
I try to ask the question again: Can anybody tell me the Different between the 2 "recovery's"
Please don't flash it, when u don't know what's inside !!!
1st http://forum.xda-developers.com/attachment.php?attachmentid=1113241&d=1339079225
2nd http://teamhacksung.org/download/samsung/GT-P5100/GT-P5100_ClockworkMod-Recovery_5.5.0.4.tar
my Problem, only the 1st works at my Device, but i want the 2nd :crying:
1st seems not to be the right one
Thanks for your advice
SG+
i ant help i flashed my samsung galaxy y young s5360 using odin but mistakely repartition was not unchecked now my phone wont start up and also not flashed by odin plz help it showing the following erorr
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
please help
So I wanted to root my phone tonight and thought I was doing everything right, well my phone rebooted and wouldn't connect to my carrier or anything and was checking device status the entire time..
So I decided to reboot and now I am just even more confused.. my phone at the current state is relooping into the recover reboot stage.. so I can't put the phone in USB debugging or anything like some post suggest..
I can get it to download mode but every time I try odin it fails and fails.. I have tried everything to my ability to get this phone to reboot on stock and I just cant seem to figure it out..
I am not to knowledgeable about ROM's and rooting and such and I learned my lesson.
When on the download screen is says at the bottom in red text " SW REV CHECK FAIL : [aboot] Fused 4 > Binary 2
This is the error code I get from Odin when trying to flash back to oem android on my S7 EDGE
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am more then open to any suggestions I just want my phone back lol
Here's what happened. I got this device (Samsung Galaxy Amp Prime J320AZ) from cricket through my sister who resides in the US. On connecting the device to WiFi, an update was available which I gladly installed. Unfortunately, the update messed the camera up and all I get is a black screen. I decided to buy a unlock code which worked seamlessly but then I noticed some settings were missing eg. Network band selection 4G/3G/2G. I did a factory reset hoping to solve it that way but only to no avail. I then tried to downgrade to stock rom (J320AZTUU2APJ2) through Odin 3.1203 from J320AZTUS2AQA1 which I received via OTA. But this didn't work either. The logs below. Then out of desperation, I flashed three out of the 4 firmware files in AP+CP+CSC in order to avoid the sboot.bin file in the BL firmware file. This completed successfully but now the phone no longer reads the sim card and has no menu for mobile networks. Now I just want my mobile network back. Any suggestions please.
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Look here for current odin files
I was trying to fix my IEMI problem by flashing in COMBINATION_FA60_G935FXXU1AQI2_CL7964511_QB14932435_REV00
and here is the log from odin:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> param.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone plz tell me the problem?
What bootloader version do you have now?
I'm not sure how you would fix IMEI issues with combination firmware as most you can do is wipe EFS (Which should never be done) which means you lose your IMEI until it gets reprogrammed.
The only thing you can try is reflashing stock samsung Firmware, other than that IMEI would need to be reprogrammed by flashing box.
I got the same exact log with Samsung J3 Pro... I'm trying to bypass/remove FRP because I can't use that talkback trick... Anybody know?