Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Mh...... odd
Sent from my LG-LS970 using xda app-developers app
devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Sorry, but you can't mention the name of banned roms here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.
luqman98 said:
Sorry, but you can't mention the name of banned roms" here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.
Click to expand...
Click to collapse
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
Banned roms are ROMs that are banned by xda members. It is caused by violating xda rules. Example, Jellyblast rom were banned because Avijit (creator) linking to a download which took you to an ad site and Nemesis is banned because containing warez and steal other's work.
better to install kies first
devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
If u have latest samsung drivers, then u should not get error... i'll advice to download latest kies from the samsung site.... install it... & then try odin..
i faced this problem long ago, & solved by this way...
as u know, dont use pit file.. dont clck on repartition...
best luck
devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Use newer versions of Odin like Odin 3.0+
And make sure adb.exe/Kies.exe/Kiesxxxxxxxxxx.exe r not running
devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Question:
Is this your first time flashing Odin?
Yes: Then first install KIES, but your stock driver is preferable (you know.. the one that comes with the box) to avoid incompatibilities, the install odin; i personally use Odin3 v1.85 and it has never failed me once.. and I have tried almost every ROM and kernel for Y. Close KIES before flashing.
No, I have done this before: Did you try another USB port or another computer? Assuming you didnt interchange the 3 files when flashing, did you remove the battery and let the fone discharge for atleast 1 minute and also did you remove the SD card. Sometimes there are files and script from your custom Roms that messes with odin so remove SD card prior to flashing.
There is another method you can do, I myself have used this twice to get out of a quite sticky softbrick... but I do not recommend it, Using a totoro pit file. If all other method fails this will MAY get you out
1. after placing PDA, MODEM and CSC... put the totoro pit file on "PIT", LEAVE BOOTLOADER ALONE!!!
2. Click repartition and NOTHING ELSE!!!
3. Click start
4. Hope for the best:fingers-crossed::fingers-crossed::fingers-crossed:
devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
did u install drivers of ur phone and started odin as administrator
As stated by a user above that make sure adb, kies ,any software that uses ur phobes usb is not running....
In odin make sure re-partition is disabled and dont use a pit file
All u need to use is pda,csc,phone,
Not even bootloader
Check whether the usb is nit interupted by anything during the flash...
Sent from my GT-S5360 using xda app-developers app
i ant help i flashed my samsung galaxy y young s5360 using odin but mistakely repartition was not unchecked now my phone wont start up and also not flashed by odin plz help it showing the following erorr
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
please help
My j5 (sm-j510fn) got pattern-locked n i tried to reset it but no success! Odin cant flash cuz the phone is on "mdm mode" or something and wipes wont working- what should i do?
try using nand erase all in odin
didnt worked bro...
EDIT: weird... cant upload an image of that...
anyway, the log says:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> ERASE_SECTOR: 0
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
use different firmware.
it isnt possible too body, due to odin refusing listen to me! it seems his hammer got heavier and now nothing is possible for me! cant flash rom/ firmware/ recovery- everything iv done give me a big red FAIL and a message of "MDM MODE, CANT DOWNLOAD" at the phone screen
I was trying to fix my IEMI problem by flashing in COMBINATION_FA60_G935FXXU1AQI2_CL7964511_QB14932435_REV00
and here is the log from odin:
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> param.bin
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
can someone plz tell me the problem?
What bootloader version do you have now?
I'm not sure how you would fix IMEI issues with combination firmware as most you can do is wipe EFS (Which should never be done) which means you lose your IMEI until it gets reprogrammed.
The only thing you can try is reflashing stock samsung Firmware, other than that IMEI would need to be reprogrammed by flashing box.
I got the same exact log with Samsung J3 Pro... I'm trying to bypass/remove FRP because I can't use that talkback trick... Anybody know?
let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Abdel3-Rahman9 said:
let me get straight to the point I accidentally changed my data to ext fat in twrp and it got stuck on on the same command so I restarted the phone and then it just kept boot looping to twrp then I went to doing and flashed twrp again ans that got stuck on the same command so I unplugged my wire. now it says that I need smart switch to go into emergency recovery mode. Now i cant access twrp and it just boots up to the smartswitch error and when i try to flash stock ROM i get an error
PLZ HELP ME!!!!!!!!!!!!!!!
this is the error message on odin
<ID:0/008> Odin engine v(ID:3.1401).. <ID:0/008> File analysis.. <ID:0/008> Total Binary size: 4058 M <ID:0/008> SetupConnection.. <ID:0/008> Initialization.. <ID:0/008> Set PIT file.. <ID:0/008> DO NOT TURN OFF TARGET!! <ID:0/008> Get PIT for mapping.. <ID:0/008> Firmware update start.. <ID:0/008> NAND Write Start!! <ID:0/008> SingleDownload. <ID:0/008> sboot.bin <ID:0/008> FAIL! <ID:0/008> <ID:0/008> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Abdel3-Rahman9 said:
on the phone I get sw rev. check fail (bootloader) device 7 binary 2
Click to expand...
Click to collapse
Flash correct firmware , your bootloader is version 7 and you are trying to install a really old firmware of v2 bootloader .. you cannot downgrade bootloader
Edit : your post is in the wrong forums too, this is for guides not Q/A
Sent from my S7 Edge using XDA Labs