Database Users

[Q] Recovery Problem Tab2 10.1 GT-P5100

Hey,
my GT-P5100 came with 4.0.3 (German, no Branding, no Provider) some weeks ago.
i start getting Root with http://forum.xda-developers.com/showthread.php?t=1686514
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/008> Removed!!
everything works, Root Access, Backup/Recovery but no CM9
so i decide to use http://forum.xda-developers.com/showthread.php?t=1722063
when i try to flash "ClockworkMod Recovery" i always get this Error:
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> ‹
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i did several different Downloads, always the same...
the first "Recovery" also called " ClockworkMod Recovery" ???
anybody any Idea what's different?
I try also go back to Stock Rom 4.0.3 and 4.0.4 everything works, but i can only use the 1st method... with this i can Install any ROM for my Device,
but not CM9 ???
When itry to install CM9, i always get this Error:
...
(Status7)
Installation aborted.
Thanks
btw. my Counter"Custom Binary Download" shows already 32counts

ah, OK,
nobody has any Idea, is nobody here?
I would post my Problem at "Development-Section" but i can't (to less posts)
I try to ask the question again: Can anybody tell me the Different between the 2 "recovery's"
Please don't flash it, when u don't know what's inside !!!
1st http://forum.xda-developers.com/attachment.php?attachmentid=1113241&d=1339079225
2nd http://teamhacksung.org/download/samsung/GT-P5100/GT-P5100_ClockworkMod-Recovery_5.5.0.4.tar
my Problem, only the 1st works at my Device, but i want the 2nd :crying:
1st seems not to be the right one
Thanks for your advice
SG+

Can't flash files using Odin

Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.

I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.

Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4

squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?

Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4

Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...

Did you use the original samsung cable for flashing?Using another cable often cause issues.

Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.

Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!

[Q] Odin not working (there is no PIT partition)

Hello,
I tried flashing a Modem (MH5) in Mobile Odin, but it hanged at
----- Modem #2 -----
- Clearing ...
for 20 minutes. I turned the phone off and wanted to try again, but the phone doesn't finish booting. It boots for a minute and I can see the boot animation of my rom, but then it reboots on its own.
Then I wanted to flash the modem with the normal Odin but that also doesn't work.
This is what it says:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I still get into the recovery, but there are no flashable modems for the i9505.
What do I do now?

Okay, I found a PIT file from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Flashing it worked fine.
After that I tried to flash the modem again, but it failed. This time with a different error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/003> File analysis..
<ID:1/008> File analysis..
<ID:1/008> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> modem.bin
<ID:1/008> NAND Write Start!!
<ID:1/008> Transmission Complete..
<ID:1/008> Now Writing.. Please wait about 2 minutes
<ID:1/008> Receive Response from boot-loader
<ID:1/008> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 2)

thedoginthewok said:
Okay, I found a PIT file from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Flashing it worked fine.
After that I tried to flash the modem again, but it failed. This time with a different error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/003> File analysis..
<ID:1/008> File analysis..
<ID:1/008> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> modem.bin
<ID:1/008> NAND Write Start!!
<ID:1/008> Transmission Complete..
<ID:1/008> Now Writing.. Please wait about 2 minutes
<ID:1/008> Receive Response from boot-loader
<ID:1/008> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 2)
Click to expand...
Click to collapse
port 3 and port 8???
what is happening? change usb port and disable kies and antivirus from task manager, reset odin. repeat procedure
Do you have any device connected to your pc other than your android? If Odin recognized more than 1 com, probably there are other device connected via USB or kies is interfering with odin.

I had the same problem. I tried different USB port and newer version of odin and that did the job.
Sent from my GT-I9505G using xda app-developers app

It had nothing to do with the USB Port.
After flashing the PIT file failed the phone displayed the message "Firmware upgrade encountered an issue . Please select recovery mode in Kies & try again".
Then I downloaded a stock Rom and flashed it in combination with the PIT File on the same USB port as before and it succeeded. After that I flashed TWRP again and I could restore my backup. It was a long process, but my phone is working fine again.
After restoring my backup I could also flash the new modem and now I have better reception.

Got the same situation (Odin flashing failure, PIT error, ended up with the "firmware upgrade encountered an issue. please select recovery mode in Kies & try again") trying to flash a new modem.
When I change the cable AND usb port, everything goes OK. Run Odin (the same 3.07), connect my i9505 with the "firmware upgrade encountered an issue. please select recovery mode in Kies & try again" and just flash the modem again, it works now.

USB
thedoginthewok said:
It had nothing to do with the USB Port.
Click to expand...
Click to collapse
Mine was a USB issue. Tried rebooting my laptop, phone, changed usb port, then finally changed USB cable and it worked ok.
Flashed PIT file with firmware.

SOLVED!
SOLVED changing usb cable and port. used the original cable with another usb port and it worked fine.

Stuck in bootloop from trying to downgrade from 5.0 to 4.2

As the title says, I tried to downgrade from lollipop 5.0 to 4.2 because I've had several issues and I also wanted to get root. I think part of my mistake was I wiped data/factory reset before I flashed AP. Any help would be much appreciated, as I have been at this for the past five hours. I added some info below that might help below. Thanks
- I cannot boot into recovery and get the message (Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again)
- CP is the only thing that will flash and CSC also fails
- model number is g900a AT&T
- I have used Odin 3.10.7 and 3.09, but no luck
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> persist.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk

Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies

VoltexYT said:
Hey I have also experienced the same thing before, I was panicking that time, so I fixed it by flashing the old zip file, if that does not work try following the instructions your phone gave eg. Go to kies
Click to expand...
Click to collapse
Kies and kies3 are both not recognizing my device. I heard it could be because of usb debugging, but I can't boot into my phone to check.

Allek84 said:
Did you try to repair him via kies?Maybe would help.
Sent from my D6503 using Tapatalk
Click to expand...
Click to collapse
Both kies and kies3 are not recognizing my device.

Soft bricked my GT-i9505 and now Odin won't work. Complete(Write) operation failed.

Here's the Odin log.
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to unlock my phone before this, before I gave up because I had downloaded the wrong version (5.0.1 UK stock instead of 4.2.2 stock, was trying to use the leaked unlock codes) and then I tried flashing TWRP 3.0.2-0 in Odin 3.10-7 which "Re-Partition" was ticked automatically for some reason and I didn't know. Now my phone is soft-bricked and Odin won't cooperate. Help me please!
I will provide more info as necessary!

Jared20098 said:
Here's the Odin log.
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1100)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I was trying to unlock my phone before this, before I gave up because I had downloaded the wrong version (5.0.1 UK stock instead of 4.2.2 stock, was trying to use the leaked unlock codes) and then I tried flashing TWRP 3.0.2-0 in Odin 3.10-7 which "Re-Partition" was ticked automatically for some reason and I didn't know. Now my phone is soft-bricked and Odin won't cooperate. Help me please!
I will provide more info as necessary!
Click to expand...
Click to collapse
Flash a stock rom with .pit file and re-partition checked. Flash a Lollipop rom.

Lennyz1988 said:
Flash a stock rom with .pit file and re-partition checked. Flash a Lollipop rom.
Click to expand...
Click to collapse
Unfortunately that's gonna take a while due to my internet being reeeaaally crappy. It takes 3-4 hrs on average to download a 1.5 GB file.

Try changing the USB ports.I had the same problem like you 1 mouth ago and tried changing from the front USB ports to the back and it worked.

simeon112 said:
Try changing the USB ports.I had the same problem like you 1 mouth ago and tried changing from the front USB ports to the back and it worked.
Click to expand...
Click to collapse
This is an old thread but gotta say LIFE SAVER.
Was flashing pit files left right and center, a simple switch to a USB 2.0 port fixed it. Thanks

Tweakforce_LG said:
This is an old thread but gotta say LIFE SAVER.
Was flashing pit files left right and center, a simple switch to a USB 2.0 port fixed it. Thanks
Click to expand...
Click to collapse
what da heck is a PIT files and where do I get this

Pit files contain partition information about a particular Samsung phone.
Older thread with good information: https://forum.xda-developers.com/showthread.php?t=999097

Israelleite said:
what da heck is a PIT files and where do I get this
Click to expand...
Click to collapse
^^^^
audit13 said:
Pit files contain partition information about a particular Samsung phone.
Older thread with good information: https://forum.xda-developers.com/showthread.php?t=999097
Click to expand...
Click to collapse