Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Hi,
you need to flash only the latest ROMs where bootloader version is 4, i.e., something as G950FXXU4CRI5 where the 5th letter from right is 4.
kyleblue09 said:
Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Click to expand...
Click to collapse
Try downloading the latest firmware for your phone and region, if you still get sboot.bin failure its probably due to the USB cable you are using, I swapped my USB cable and now my S6 is happily flashing.
Tyr flashing without CSC.
You can flash CSC later I think.
Related
Hi there,
I really need a quick few minutes of help. I began the night last night by trying to upgrade safestrap from 3.72 to 3.75, for what I later learned to be for no good reason. Anyway, I ended up wiping my entire internal storage including the root files, which forced me to odin back to MJE from NC2. So then I installed MJE and let the system upgrade to NC4. Then I proceeded to root and safestrap my system with success (including installing busybox). I then rebooted into recovery and flashed the Eclipse rom (I've tried stock and Rom-Slot1) and then rebooted into download mode and Odin'ed the NC2 kernel, which results in a fail every time. The odin log says it falis after aboot.mbn every time.
Please consider helping me!
Thanks!
P.s. This is the odin fail log.
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
SM-935F from XSG region. Unlocked and Qualcomm processor. Never enabled debugging mode or OEM in developer tools. I tried to flash my phone with the following firmware. However when I tried to do it, Odin failed. Also Smart Switch Samsung doesn't initiate/emergency recovery says cannot proceed due to an error.
Samsung Smart Switch shows the below data while trying to initiate the recovery which eventually fails.
PDA: QH8 / CSC: QG2 / PHONE:QG3 (COS)
Phone doesn't go to recovery mode at all. I can get it to Download mode however everytime I try to run a firmware, it shows "Complete(Write) operation failed."
Also tried to do abd enable reboot which said "device(null) not found". Just need this working and I don't care about losing data. Please let me know how to proceed.
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> modem_debug.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone please help me out
This morning i was running AlexisRom on my Galaxy s8 (SM-G950FD) which is an s9 port for s8 but the headphone jack wasn't working on the rom so i downloaded a stock rom from Sammobile and tried to flash it through odin, and after i put in the BL, AP, CP and CSC file and pressed start, it gives me a fail and says :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2753 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> param.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone in the download mode, it comes up in red writing:
[CM] SW Rev. CHECK FAIL. DEVICE 3. BINARY 2
Also, i cannot get into recovery at all by pressing Bixby + Vol up + Power, it just bootloops
If i try install TWRP, my phone boots and shows the Samsung screen and says in pink writing on the top:
RECOVERY image signature check fail!!!!
Reboot to avoid warranty bit set!!
And i am 100% sure that the phone works as i had it working yesterday perfectly fine.
The roms i have installed before this one:
Stock S8 Rom
AMBASADII ROM FOR S8/S8+
Alexisrom s9 port for s8
Someone please help me out, if you need more details please ask!
THANKS <3
For anyone who has the same problem as me, here is a fix i found after almost giving up,
Go to Sammobile.com or Shell.BoxWares.com and download the latest firmware for your phone model, even if it isn't your country, still download and flash it, i live in ireland, so i should have 3IE Firmware but i downloaded the Indonesian firmware and it flashed without a single hassle
Its due to bootloader issue
xNexeon said:
Can someone please help me out
This morning i was running AlexisRom on my Galaxy s8 (SM-G950FD) which is an s9 port for s8 but the headphone jack wasn't working on the rom so i downloaded a stock rom from Sammobile and tried to flash it through odin, and after i put in the BL, AP, CP and CSC file and pressed start, it gives me a fail and says :
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2753 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> cm.bin
<ID:0/005> param.bin
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on my phone in the download mode, it comes up in red writing:
[CM] SW Rev. CHECK FAIL. DEVICE 3. BINARY 2
Also, i cannot get into recovery at all by pressing Bixby + Vol up + Power, it just bootloops
If i try install TWRP, my phone boots and shows the Samsung screen and says in pink writing on the top:
RECOVERY image signature check fail!!!!
Reboot to avoid warranty bit set!!
And i am 100% sure that the phone works as i had it working yesterday perfectly fine.
The roms i have installed before this one:
Stock S8 Rom
AMBASADII ROM FOR S8/S8+
Alexisrom s9 port for s8
Someone please help me out, if you need more details please ask!
THANKS <3
Click to expand...
Click to collapse
You are trying to flash a old bootloader on top of new bootloader version, downgrading is not allowed AFAIK
There is a simple reason for this. If you came from TWRP as "reboot to download", this creates the problem. Turn off the phone. Go to download mode with Vol_Down+Bixby+Power and then press Vol_Up button. When I enter download mode like this, it flashes without any problems.
Answer, apparently I was using v4 bootloader, thought I was on most recent, but I wasn't. Had a hard time finding newer/current firmwares for my device, but was able to find v5, flashed and went perfectly
So I'm trying to reset my phone as a bad rom flash caused some sort of issue and couldn't get back into twrp "official binaries only"
Find latest firmware for my csc (which was july) doesnt work, I thought it might have been a BL issue as I had the august patch through a custom rom, found a different csc which was from august, and I get the same error
I also no longer get the official binaries only, just a bootloop of "An error has occurred while updating....use emergency recovery function in smart switch" which I also tried, no luck, but I can still get into download mode
Using most recent odin, official cable, updated usb firmware and such and am running as admin. Have tried different ports too, but it always fails at same step
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
Any Ideas? Thanks
I am frustrated, every time I try to flash my phone from Oreo 8.1.0 to Nougat 7.0 I get an error.
I have SM-J530F and I downloaded the firmware from sammobile, tried 4 different for Germany.
The USB port works perfectly fine, anti virus program is disabled for the flashing process and Odin is run as an administrator.
Odin error:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2962 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL! <ID:0/005>
<ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Than my phone says:
SW REV Check fail (bootloader) device: 5 binary: 2
Who can help me? D:
LalaGhost said:
I am frustrated, every time I try to flash my phone from Oreo 8.1.0 to Nougat 7.0 I get an error.
I have SM-J530F and I downloaded the firmware from sammobile, tried 4 different for Germany.
The USB port works perfectly fine, anti virus program is disabled for the flashing process and Odin is run as an administrator.
Odin error:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2962 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL! <ID:0/005>
<ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Than my phone says:
SW REV Check fail (bootloader) device: 5 binary: 2
Who can help me? D:
Click to expand...
Click to collapse
you can't downgrade 8.1 to 7.0 due to both having different Bootloaders.
BlackAxiom said:
you can't downgrade 8.1 to 7.0 due to both having different Bootloaders.
Click to expand...
Click to collapse
Ok...