I am frustrated, every time I try to flash my phone from Oreo 8.1.0 to Nougat 7.0 I get an error.
I have SM-J530F and I downloaded the firmware from sammobile, tried 4 different for Germany.
The USB port works perfectly fine, anti virus program is disabled for the flashing process and Odin is run as an administrator.
Odin error:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2962 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL! <ID:0/005>
<ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Than my phone says:
SW REV Check fail (bootloader) device: 5 binary: 2
Who can help me? D:
LalaGhost said:
I am frustrated, every time I try to flash my phone from Oreo 8.1.0 to Nougat 7.0 I get an error.
I have SM-J530F and I downloaded the firmware from sammobile, tried 4 different for Germany.
The USB port works perfectly fine, anti virus program is disabled for the flashing process and Odin is run as an administrator.
Odin error:
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> userdata.img
<ID:0/005> Home Binary Download
<ID:0/005> Total Binary size: 2962 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation.. <ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL! <ID:0/005>
<ID:0/005> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1)
Than my phone says:
SW REV Check fail (bootloader) device: 5 binary: 2
Who can help me? D:
Click to expand...
Click to collapse
you can't downgrade 8.1 to 7.0 due to both having different Bootloaders.
BlackAxiom said:
you can't downgrade 8.1 to 7.0 due to both having different Bootloaders.
Click to expand...
Click to collapse
Ok...
Related
I am trying to return my phone to stock but I keep getting this error:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I really need help, it is bricked.
Use this app from your computer, with your phone in download mode. It saved me. I believe it's because you may be trying to flash to a previous version of firmware. http://support-us.samsung.com/VerizonSoftwareUpdateWin
Did you get this fixed?
Sent from my SM-G930V using Tapatalk
This error has happened to me before. Don't use the HOME CSC file, use the other one that wipes your phone. The Home CSC never worked for some reason.
Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Hi,
you need to flash only the latest ROMs where bootloader version is 4, i.e., something as G950FXXU4CRI5 where the 5th letter from right is 4.
kyleblue09 said:
Hey guys,
I have an issue with my Samsung Galaxy S8 SM-G950F,
I am simply unable to flash any roms through ODIN. Each attempt results in a "Complete(Write) operation failed."
Log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2004 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing an unimaginable number of stock roms and combination roms, none of which work. I am able to flash custom roms through TWRP, however, each rom I flash shows no signal. I believe my IMEI and EFS has become corrupt and now I wish to flash a combination rom (to fix these EMEI and EFS issues), however I simply cannot flash any rom through odin. Each time I attempt to flash a rom though ODIN, I get one of
two messages on my phone:
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 4, BINARY: 1
or
SW REV. CHECK FAIL(BOOTLOADER) DEVICE: 3, BINARY: 1
Help is greatly appreciated.
Thanks guys
Click to expand...
Click to collapse
Try downloading the latest firmware for your phone and region, if you still get sboot.bin failure its probably due to the USB cable you are using, I swapped my USB cable and now my S6 is happily flashing.
Tyr flashing without CSC.
You can flash CSC later I think.
i just recently got gifted an old s8 and i want to root it with all the mods i have on my s5 (system wide adblock, custom rom, xposed framework mods, root ect.) but any time i try to flash TWRP with odin it ends up with a fail. from some research i think its the knox security **** that Samsung installs but im not sure how to bypass it. i have already tried to flash the SM-G950F_1_20200324151741_69ybtdjdbt_fac rom.
odin logs:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Pls help im currently frp locked and i cant boot to stock recovery
When i try to flash stack ROM using Odin, i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3739 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On download moad it says SW REV. CHECK FAIL(BOOTLOADER) Device:3, Binary 1
Pls help im really scared
Hi,
I can't find stock for T555.
I have international model (according to samsung us support) but I did have some built in Hotel booking app on German language.
It's bricked and I can't turn it off.
On sammobile it's archived and I am not premium. So I downloaded firmware from galaxyfirmware.
Btw, any other method to root?
This one below didn't worked for me since I got seandroid problem:
[ROOT][TWRP]Samsung Galaxy Tab A SM-T550/T555/P550/P555/T350/P350/T355/P355
Port of CF-autoroot for the Tab A and Tab A plus. Supports all models. See the link below for details: http://forum.xda-developers.com/showthread.php?t=3124284 NOTE: does not support Marshmallow. To root MM install TWRP provided below and...
forum.xda-developers.com
I also tried to flash latest twrp and it didn't work.
How, tablet is still flashing btw.
It says binary size is too large : aboot
and warranty void 0x1 (4)
Tried flashing UK rom SM-T555_BTU_T555XXU1CRG1_T555BTU1CRH1_T555XXU1CQHA_T555XXU1CRG1:
Here is log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> sec.dat
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> persist.img.ext4
<ID:0/005> userdata.img.ext4
<ID:0/005> meta-data/
<ID:0/005> meta-data/fota.zip
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Device gave:unsupport dev_type
It almost flashed, like 90% then failed.