Hey!
My head unit is stuck in bootloop. It's an xtrons Android 10 PX6 unit MTCE_GS_V3.67_3 (Nov 7 2020).
I tried to flash Hal9k with the modinstaller downgrading to Android 9. Got stuck in bootloop.
That can happen. So I went back to Android 10 again and installed CHS2_RK3399_10.0(20200424)img via SD - stuck in bootloop.
I have access to recovery though and tried wipe cache and factory reset.
I tried to find help in old threads, pressed with 5 fingers on the screen during boot-up, and tried tapping on the screen.
The unit is connected to a DC power supply on my desk and I always disconnected power between all tries. No success.
Any more ideas?
Thanks for your support! It's well appreciated!
I have a similar issue with Ownice C800 PX6 rockchip 3399, i changed an option on the setting to have it default to off instead of On, after it rebooted nothing shows up on the screen. i can access the recovery menu and did a factory rest and nothing happens, i installed
Malaysk ROM for PX6 RK3399 with Android 10 and the update was successful but still no boot at all, the recovery log shows failure to create file in memory. not sure if the setting made the memory protected and why the boot is failing.
My apologies previous threaders I cannot fix your bootloop, but have similar problem.
Question to bluefreak, how did you get into recovery mode?? from a bootloop??
My original item is a 4gb ram 64 gb rom, px6 unit, previously I put a russian rom flashed via update to system on it, I think I paid 20 usd for it and it worked a treat until my son used the car, several years past warranty. And it has gone into bootloop.
I think the flashed rom was Malaysk?? I may be wrong.
I have a reset button, held it in for a minute still bootloop, connected another rom via usb and it will not flash, just bootloop. I have also attempted many methods from google and youtube.
Related
I ran Cyanogen app and when it said there where a new version, I selected this and downloaded.
The application would like to restart to continue install.
Now I'm stuck.
The unit dosn't boot.
I have searched the forum but must problems handles stuck in boot.
My unit dosn't show anything.
Is there a reset / master reboot / override power on?
I have a SD card that boot into recovery and flashes ROM without problem. If I only could get the unit to start :-(
http://forum.xda-developers.com/showthread.php?t=949699
Hi all,
I have an Xtrons PST10HDT head unit for my Toyota Highlander, that runs Android 10, with a MTK Quad core Cortex-7, 2gb RAM, 16GB ROM. A few days ago I noticed when I'd start my car it gets stuck in a boot loop and stays on the Android loading screen. I've tried the power/reset button in every combination possible, to no avail.
I've reached out to Xtrons and they pointed me to their forum that yielded nothing. So I came here. Does anyone have any insight on how I might get past this? I imagine I'll need to flash a new ROM on it, but I can't find any information anywhere.
Thanks.
Hallo everybody,
i have a rpoblem with may CARPAD III NR5210.
IT's a RK3188 with STM32 chip. I try to flash XDAUTO rom, it works. Monday i reflash because i don't flash with clear system and some error appears. During the proced i wipe all (system, data, etc..) but the battery broke down.
Now i can't put it in recovery mode. Even start teh boot logo XDAUTO in sreeen.
I try to push reset button, one time, two times, for 20 seconds and more, but notting works; boot logo appares in the screen.
I try to disconnect to battery of the car for a night. No works, boot logo starts.
I try to put 5 fingers in the screen during the start, no works, boot logo starts.
i try to connect the OTG port in my PC to flash with RKTOOL, but the unit isn't recognized (it's works 2 month ago).
it's seem brick ;( ;( ;(
Only procedure that seem work is SD BOOT procedure. I try whit the SD BOOT procedure that i found in internt for PX5 MTCD unit, and no boot logo starts... only a illuminated black screen, but nothing appares becouse i think i don't have the right software into the SD.
Please, help me.
Many many many thanks
Some one have some procedure that can halp me?
Please, i don't know no other way to resolve this ptoblem.
Hello,
I've been using an android radio bought at aliexpress:
https://a.aliexpress.com/_uvy5FM
From time to time its performance would decrease and eventually the device would get stuck in a boot loop. I then contacted the seller who sent me the firmware. After flashing the device, everything went back to normal. A few days ago I had to flash the radio again but this time, after starting the update, the device would just restart with update interrupted. I now cannot enter recovery mode and the device keeps rebooting. What can I do to fix that?
All I can say for now is that it runs Android 10, has 64GB of storage and 4GB of RAM. It is powered by an rk3368. The firmware is probably a customized PX5 - rk3368-userdebug 10 QP1A. 190711. 019 101626...
Please help. If any further details are needed, I will try to provide them as my access to device info is limited due to the bootloop... I still have the firmware archive.
Thanks!
hi, everyone, I need some pointers on how to fix this device, it was working fine for about 11 months until it got stuck at the boot screen, the seller says it is a mainboard issue, but have not even the slightest idea on what might be wrong.
if I make an SD update card, the logo displayed at boot changes, but never gets past it, i have no idea on how to make it go into recovery mode, or where to connect an usb cable to connect to PC
anyone else faced the same issue?