Hallo everybody,
i have a rpoblem with may CARPAD III NR5210.
IT's a RK3188 with STM32 chip. I try to flash XDAUTO rom, it works. Monday i reflash because i don't flash with clear system and some error appears. During the proced i wipe all (system, data, etc..) but the battery broke down.
Now i can't put it in recovery mode. Even start teh boot logo XDAUTO in sreeen.
I try to push reset button, one time, two times, for 20 seconds and more, but notting works; boot logo appares in the screen.
I try to disconnect to battery of the car for a night. No works, boot logo starts.
I try to put 5 fingers in the screen during the start, no works, boot logo starts.
i try to connect the OTG port in my PC to flash with RKTOOL, but the unit isn't recognized (it's works 2 month ago).
it's seem brick ;( ;( ;(
Only procedure that seem work is SD BOOT procedure. I try whit the SD BOOT procedure that i found in internt for PX5 MTCD unit, and no boot logo starts... only a illuminated black screen, but nothing appares becouse i think i don't have the right software into the SD.
Please, help me.
Many many many thanks
Some one have some procedure that can halp me?
Please, i don't know no other way to resolve this ptoblem.
Related
hello guys
hope you can help me. i have a HU based in the Tonghai HU, that is stuck in bootloop
the problem is that my HU is the one that doesnt have hardware keys. the only hardware key i have is the reset button, wich only reboots the radio.
this happens after i tried to insert a custom bootlogo. no in only shows the bootlogo for 2 seconds and reboots. is there anyway i can reinstall the firware by usb or by th sdcard?
please help
hi everybody.
I got this system a few days ago.
When I try to update the car icon, the device need restart but stay on a black screen immediately after the logo indicated. (says wellcome nav system or Something like that)
Need to disconnect the battery and wait a few minutes and only then the system goes on.
Today the system remained on a black screen no matter what I do.
I tried to enter recovery but I do not know the keys order.
I tried everything listed here but it does not work.
This model may get to recovery in a different way?
Is anyone know a system updates for this unit?
thanks very much
http://www.autopumpkin.com/car-dvd-...-gps-obd2-wifi-3g-steering-wheel-control.html
Hey!
My head unit is stuck in bootloop. It's an xtrons Android 10 PX6 unit MTCE_GS_V3.67_3 (Nov 7 2020).
I tried to flash Hal9k with the modinstaller downgrading to Android 9. Got stuck in bootloop.
That can happen. So I went back to Android 10 again and installed CHS2_RK3399_10.0(20200424)img via SD - stuck in bootloop.
I have access to recovery though and tried wipe cache and factory reset.
I tried to find help in old threads, pressed with 5 fingers on the screen during boot-up, and tried tapping on the screen.
The unit is connected to a DC power supply on my desk and I always disconnected power between all tries. No success.
Any more ideas?
Thanks for your support! It's well appreciated!
I have a similar issue with Ownice C800 PX6 rockchip 3399, i changed an option on the setting to have it default to off instead of On, after it rebooted nothing shows up on the screen. i can access the recovery menu and did a factory rest and nothing happens, i installed
Malaysk ROM for PX6 RK3399 with Android 10 and the update was successful but still no boot at all, the recovery log shows failure to create file in memory. not sure if the setting made the memory protected and why the boot is failing.
My apologies previous threaders I cannot fix your bootloop, but have similar problem.
Question to bluefreak, how did you get into recovery mode?? from a bootloop??
My original item is a 4gb ram 64 gb rom, px6 unit, previously I put a russian rom flashed via update to system on it, I think I paid 20 usd for it and it worked a treat until my son used the car, several years past warranty. And it has gone into bootloop.
I think the flashed rom was Malaysk?? I may be wrong.
I have a reset button, held it in for a minute still bootloop, connected another rom via usb and it will not flash, just bootloop. I have also attempted many methods from google and youtube.
hi, everyone, I need some pointers on how to fix this device, it was working fine for about 11 months until it got stuck at the boot screen, the seller says it is a mainboard issue, but have not even the slightest idea on what might be wrong.
if I make an SD update card, the logo displayed at boot changes, but never gets past it, i have no idea on how to make it go into recovery mode, or where to connect an usb cable to connect to PC
anyone else faced the same issue?
Hello everyone,
So I have an Venku Android 10 PX6 unit that I had installed Hal9k onto some time ago, and for months everything worked fine.
However, about a week ago, the device got stuck on the boot logo and does not actually boot up android.
I have removed the power to the unit, pressing the buttons while its unplugged to drain any residual power, but that has done nothing. it just goes back to the boot logo once again.
The backup camera does work, but aside from that nothing else does. I do have the OEM FW on a flash drive, and I have tried to access recovery mode to flash it, but holding reset down doesnt seem to get me there. When I press down RST, the button lights turn off, as does the screen, but the button lights never flash indicating that I can release. I've tried holding it down for 15+ seconds, but no matter what, once I release it, the button lights come on like normal and so does the HAL9K boot image. It then just stays there.
At this point, I am thinking that this is a hardware failure, but I wanted to see if anyone had another creative way to get into recovery or something else I can try to get into recovery or reflash without recovery mode. I have looked at other posts, but couldnt find one that yielded any results.
Thank you all in advance.
Perhaps read MTCD forums and the detailed recovery / OTG posts