hi, everyone, I need some pointers on how to fix this device, it was working fine for about 11 months until it got stuck at the boot screen, the seller says it is a mainboard issue, but have not even the slightest idea on what might be wrong.
if I make an SD update card, the logo displayed at boot changes, but never gets past it, i have no idea on how to make it go into recovery mode, or where to connect an usb cable to connect to PC
anyone else faced the same issue?
Related
Hi guys,
hopefully you can help me or link me to a thread with some help.
After 5 years my g2 broke down last week. I had the official Android 4.4.2 and have never flashed anything. Don't know if it has anything to do with it but i didn't have any free storage left of my 16gb (european version, so i gueass D802). The days and weeks before it warned me that i used all the storage and some apps won't work properly ( I didn't care because I ran without problems for month)
My phone broke down and now I am stuck in the boot loop. When I disconnect the battery on the back and then connect it again and plug it in my laptop the LG Logo will appear and the phone will charge. No Problem there, I still have battery left. When I try to turn it on the LG Logo will appear and then the display turns black, you know how this goes.
I can not enter the recovery mode nor the download mode. My Laptop wont recognize my phone on the device manager or somewhere else. What my laptop does, is that the typical windows sound comes when I plug the G2 in and then after some seconds the sound comes again when the phone turns black.
Then I got a error message:
Kernel Crash! DemiGod Crash Handler : Kernel Crash!
From there I did not reboot successfully. How can I get a Kernel Crash with the normal Android Software? weird.
All I care about are my pictures left on the phone. I was dumb enough to not make a backup. Do you know a way to save my pictures? Can I somehow exchange the storage chip?
Please help me.
Can anyone help? Has anybody had experience with boot loop headunits? I was told by the company to do a software download(they provided) thru usb I did that but its still stuck on boot loop. Any help or ideas?
Hallo everybody,
i have a rpoblem with may CARPAD III NR5210.
IT's a RK3188 with STM32 chip. I try to flash XDAUTO rom, it works. Monday i reflash because i don't flash with clear system and some error appears. During the proced i wipe all (system, data, etc..) but the battery broke down.
Now i can't put it in recovery mode. Even start teh boot logo XDAUTO in sreeen.
I try to push reset button, one time, two times, for 20 seconds and more, but notting works; boot logo appares in the screen.
I try to disconnect to battery of the car for a night. No works, boot logo starts.
I try to put 5 fingers in the screen during the start, no works, boot logo starts.
i try to connect the OTG port in my PC to flash with RKTOOL, but the unit isn't recognized (it's works 2 month ago).
it's seem brick ;( ;( ;(
Only procedure that seem work is SD BOOT procedure. I try whit the SD BOOT procedure that i found in internt for PX5 MTCD unit, and no boot logo starts... only a illuminated black screen, but nothing appares becouse i think i don't have the right software into the SD.
Please, help me.
Many many many thanks
Some one have some procedure that can halp me?
Please, i don't know no other way to resolve this ptoblem.
Hey!
My head unit is stuck in bootloop. It's an xtrons Android 10 PX6 unit MTCE_GS_V3.67_3 (Nov 7 2020).
I tried to flash Hal9k with the modinstaller downgrading to Android 9. Got stuck in bootloop.
That can happen. So I went back to Android 10 again and installed CHS2_RK3399_10.0(20200424)img via SD - stuck in bootloop.
I have access to recovery though and tried wipe cache and factory reset.
I tried to find help in old threads, pressed with 5 fingers on the screen during boot-up, and tried tapping on the screen.
The unit is connected to a DC power supply on my desk and I always disconnected power between all tries. No success.
Any more ideas?
Thanks for your support! It's well appreciated!
I have a similar issue with Ownice C800 PX6 rockchip 3399, i changed an option on the setting to have it default to off instead of On, after it rebooted nothing shows up on the screen. i can access the recovery menu and did a factory rest and nothing happens, i installed
Malaysk ROM for PX6 RK3399 with Android 10 and the update was successful but still no boot at all, the recovery log shows failure to create file in memory. not sure if the setting made the memory protected and why the boot is failing.
My apologies previous threaders I cannot fix your bootloop, but have similar problem.
Question to bluefreak, how did you get into recovery mode?? from a bootloop??
My original item is a 4gb ram 64 gb rom, px6 unit, previously I put a russian rom flashed via update to system on it, I think I paid 20 usd for it and it worked a treat until my son used the car, several years past warranty. And it has gone into bootloop.
I think the flashed rom was Malaysk?? I may be wrong.
I have a reset button, held it in for a minute still bootloop, connected another rom via usb and it will not flash, just bootloop. I have also attempted many methods from google and youtube.
Good Day XDA.
Guys i have a problem and need some advise and help, i downloaded what was to be the latest system update to fix the Radio app no sound since i bought the unit.
flashed the System update all went okay - Android rebooted and completed its setup and was prompted to restart for the settings to take affect.
and boots up into a black screen no boot logo nothing.
i plugged in a USB keyboard and can snap photos so the unit is on and working i assume the System update messed up the Graphics display.
is there anyway to get this T3L into recovery mode to Flash the Original System update again to fix this problem?
please anyone with any ideas or tips and tricks i would be very grateful.
Thank you guys