Hi, I have a CC2 Plus radio to Renault Megane 3 .After installing the radio, the outside temperature, i.e. from the canbus, is not displayed.
I wrote to tech support teyes said they disabled this feature and that it will no longer be enabled. Only the one downloaded from the Internet is displayed, not the canbus temperature sensor. Does anyone know in any way it could be displayed on the radio screen
Not MTCD, requested move to [Android Head units].
Op, suggest a read of the forums and a little familiarising before posting.
majorek22 said:
Hi, I have a CC2 Plus radio to Renault Megane 3 .After installing the radio, the outside temperature, i.e. from the canbus, is not displayed.
I wrote to tech support teyes said they disabled this feature and that it will no longer be enabled. Only the one downloaded from the Internet is displayed, not the canbus temperature sensor. Does anyone know in any way it could be displayed on the radio screen
Click to expand...
Click to collapse
was it actually working before
i noticed the same just installed the unit few days ago
did you managed to do something about the joystick near the handbrake or edit the controls on steering wheel ?
Yes, it showed temperature from sensor ( magistral can bus ) but Teyes switch off this. I haven't got joystick but I saw videos on YouTubute and it working with this radio. when it comes to the output on the steering wheel, turn it down, turn it up and set the applications on the button. an image is also displayed when the door is open.
does your original radio was the single color screen one or tomtom navigation type?
Related
Hello!
I´ve recently got a Witson HU (MTCD 1.97a) with the Canbus adapter for my Fiat Bravo (2013).
The steering wheel controls function ok (vol up, vol down,...) but i´ve seen another HU displaying "door opened" or other msgs (displayed in center car display), overwritten on HU display that look like the ones that appear when you change volume...
I tried various canbus settings (i found 2 different for the Fiat Bravo) but neither of them works as aspected. One is ok for the steering wheel controls and the other does nothing. But again... no extra msgs on screen.
Is it ok like this? Maybe the canbus decoder only works for those msgs, and ignore the rest of the canbus data...
any ideas would be appreciated!! thanks in advance!
greetings from Argentina!
_javi_ said:
Hello!
I´ve recently got a Witson HU (MTCD 1.97a) with the Canbus adapter for my Fiat Bravo (2013).
The steering wheel controls function ok (vol up, vol down,...) but i´ve seen another HU displaying "door opened" or other msgs (displayed in center car display), overwritten on HU display that look like the ones that appear when you change volume...
I tried various canbus settings (i found 2 different for the Fiat Bravo) but neither of them works as aspected. One is ok for the steering wheel controls and the other does nothing. But again... no extra msgs on screen.
Is it ok like this? Maybe the canbus decoder only works for those msgs, and ignore the rest of the canbus data...
any ideas would be appreciated!! thanks in advance!
greetings from Argentina!
Click to expand...
Click to collapse
That feature doesnt necessarily work on all cars, look for an app like "Car settings" or "Car service" in the apps when you have it set on the 2 Fiat Bravo CAN Bus setting, if you cant find it anywhere, go through all apps, if you still cant find anything, then that feature is not supported. You could also try any other Fiat CAN Bus setting, or maybe Lancias, Alfa or even some Chrysler vehicles theyre all made by FCA so there is a possibility it may work, probably not but worth trying.
You could also try the menu on the car, I know on the Bravo you can control some stuff on the factory nav unit, if you didnt ahve nav in the car it may be a case of turning the feature on via the car before it will work.
After typos1 tip, i set the canbus mode to ALFA ROMEO. The display shows an overhead view of a car, with the doors or boot being opened. Great!!! BUT... i lost steering wheel controls. Bad!!
So i´ll wait for an OS update to fix this thing.
The calibration screen for steering wheel controls doesnt show any option, in any case.
thanks again!
_javi_ said:
After typos1 tip, i set the canbus mode to ALFA ROMEO. The display shows an overhead view of a car, with the doors or boot being opened. Great!!! BUT... i lost steering wheel controls. Bad!!
So i´ll wait for an OS update to fix this thing.
The calibration screen for steering wheel controls doesnt show any option, in any case.
thanks again!
Click to expand...
Click to collapse
Ah, thats annoying.
The OS has nothing to do with it, its the MCU that deals with this sort of stuff, so an OS update for wont help, an MCU update may do IF they add full support for the Bravo and theres no guarantee that they will.
Some cars have CAN Bus but use resistive SWC (my Alfa is like this, but some Alfas do have CAN Bus SWC) which could explain it.
There may be a way round it if you buy an SWC adapter for your car. These headunits supposedly use the same SWC protocol as Pioneer, so if you got a Pioneer/Fiat Bravo SWC adapter, disconnected the 2 SWC wires from your CAN Bus box and attached them to the SWC adapter it would convert the CAN Bus SWC signal from your car into resistive so the stereo can understand them. AFAIK this has not been done before but it should work.
EDIT : didnt spot the bit about the SWC calibration not showing up, damn, I guess you could extract the SWC app using the app "APKextractor" and see if it installs when the stereo is in Alfa Romeo CAN Bus mode.
typos1 said:
EDIT : didnt spot the bit about the SWC calibration not showing up, damn, I guess you could extract the SWC app using the app "APKextractor" and see if it installs when the stereo is in Alfa Romeo CAN Bus mode.
Click to expand...
Click to collapse
browsing other threads i saw there are users with the same issue. SWC app shows just a blank screen (with save and reset buttons on top).
I´m still studying this (among other things... the mtcd HU is nice.. but it looks like it needs polishing)
hi, is your witson still working?
Hi ive recently bought a android PX3 head unit, installed it ok but it has changed my milage into KM as im in the UK i need the speedo in MPH, there is a app installed called control settings, in this there is a milage setting set to < KM > but it wont change, most of the settings in the control settings app like temp set to C wont change to F either, indicators set to one flash etc the only setting that i can change is CD indicator.
would anyone know if this could be a software bug with the MCU or the android version?
where would i look for a update? i dont even know who the manifacturer is.
The head unit has no physical buttons only a reset hole so can anyone please tell me how i would get to the recovery screen?
ive never had a android head unit before so dont know much about these units.
Can anyone please help me change/fix this setting or another app or update i can install that can change the milage back from KM to miles,
model px3
android 7.1.2
kernel 3.0.101+
mcu MTCE_KSP2_V2.70a_1
thanks for any help
regards
aliexpress.com/item/Android-7-1-7-Car-DVD-player-GPS-Navigation-Stereo-Audio-Radio-DVD-for-Ford-Fiesta/32839001963.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_5000015_10151_10344_10068_10130_10324_10342_10547_10325_10343_51102_10340_10341_10548_5130015_10192_10190_10084_10083_10307_10301_10303_10312_10059_10313_10314_10184_10534_5790011_100031_10604_10103_10605_10594_5060015_10142,searchweb201603_36,ppcSwitch_5&algo_expid=239a9acb-5370-48d4-8bfa-8a9d42e57358-35&algo_pvid=239a9acb-5370-48d4-8bfa-8a9d42e57358&transAbTest=ae803_5&rmStoreLevelAB=5
https://www.ebay.co.uk/itm/CTSFO004...sh=item4413f7f882:g:bXAAAOSwhChZrEtd#shpCntId
would this work with the HU, just connect upthe 3 wires? and not connect the HU plug connector that goes to my info screen?
regards
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
did you ever get your problem sorted as I now have the same problem
Hi no the seller didnt want to know and just fobbed me off for months before blanking me on whatsapp, no firmware updat as promised, nothing, so what i did was got a set of these:T - 3 Car Intelligent Steering Wheel GPS, hang up/answer, volume setting, music Controller with Noctilucent Function buttons https://www.aliexpress.com/item/Zee...191.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J whicc work quite well, ive also recently ordered a button stalk like how the older radion buttons were: Car steering wheel button remote control lights car navigation DVD / 2 din android Bluetooth wireless Universal remote control,
https://www.aliexpress.com/item/Car...596.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J but im still awaiting delivery of it.
ill be very happy with the stalk as well as the buttons ive stuck to the centre consol, no where near as cool as the steering wheel controls but i really needed my speedo in MPH
anyways hope this helps somewhat not perfect but better than the speedo flashing between KM/MPH
regards
shadowfoxmi said:
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
Click to expand...
Click to collapse
I know this is old but I have the same issue with my Joying head unit and my BMW e90. On start up, I have to go into my settings and set everything to American/Imperial units. Did you ever find a fix to this? It's driving me nuts.
Hello,
I have an XTRONS PA17GFVPL-LB mounted on Golf 7. When I mounted it all worked correctly. After a few days, the communication with canbus started to work intermittently. So I asked for the replacement of the canbus decoder; which did not solve unfortunately. The xtrons support then asked me to upgrade to MCU GS v2.88, but also this action did not resolve the issue. The strangeness is the following: the radio sends correctly messages via canbus (I can set all the details such as units of measurement, radar sound tone, intensity of lights etc.) but it has some difficulties while receiving messagges (input from the steering wheel buttons and reading values such as temperature or values set above), meaning the "receiving" is intermittent, it works 1 time out of 5. However, in the rare cases the unit works fine, everything is fluid and perfect.
I also tried to unplug the car battery and / or the canbus fuses, hoping it would unlock somehow, but no way.
I tried all 100+ possible canbus combinations in the "factory settings" settings. The only one that works is the "35 Golf 7".
The xtrons unit is not blocked by particular processes, when it works everything is smooth, even with waze and spotify active together.
Xtrons says they do not have a more specific decoder for Golf Mk7 than the one they gave me. Below the link to the pictures of the canbus decoder I'm using, supplied by Xtrons. On Roadnavi.com I found the C257 for golf 7, I think I'll buy it, but I have no clue whether it is compatible with the unit.
Pictures link -> postimg[dot]cc/gallery/p2ue7cxo/
does anyone have any clue?
Thank you
Hello everyone!
I have got a Navifly M200 with Andoid 10 on my Peugeot 308cc for about two months, but I have got some problems. The canbox does not detect perfectly my car, so I cannot configure the clima, I cannot change the behaviour of the steering wheel buttons, everytime I turn on the engine the device's clock is 7:00, and the car' s dashboard always shows "track -/0" on track name. I went to car settings, extra settings, entered the password and tries to change the car model. It shows "Old 308". I changed it to 308/408, it showed a clima application, but it does not work and every other problem is the same as well. Sometimes itupdates the list but I cannot change the model as it shows error in connection!!
Has anyone else these problems?
Thanks in advance!
I have a Navifly X400 on my Peugeot 207. The canbus does not detect my car. I bought an interface to work the wheel buttons.
Hi just brought this unit 9.7 inch android radio have got working steering wheel controls ....
question 1... has anybody got the onscreen clitmate/heating controls to work by touching the screen
Question 2 on the inbuilt display theme it shows when the doors are opened ive installed carwebguru but it doesnt show them anymore
anyone know how to get this back and also ive read somewhere that the protocol for GM Buick might not be the right one to use for the vauxhall insignia
any help would be most greatful
Hello, looks like we both have this unit in our cars. Remember the Factory settings are actually wrong with saying parameter its on - but its in real off.