Fiat Bravo & Canbus messages - Android Head-Units

Hello!
I´ve recently got a Witson HU (MTCD 1.97a) with the Canbus adapter for my Fiat Bravo (2013).
The steering wheel controls function ok (vol up, vol down,...) but i´ve seen another HU displaying "door opened" or other msgs (displayed in center car display), overwritten on HU display that look like the ones that appear when you change volume...
I tried various canbus settings (i found 2 different for the Fiat Bravo) but neither of them works as aspected. One is ok for the steering wheel controls and the other does nothing. But again... no extra msgs on screen.
Is it ok like this? Maybe the canbus decoder only works for those msgs, and ignore the rest of the canbus data...
any ideas would be appreciated!! thanks in advance!
greetings from Argentina!

_javi_ said:
Hello!
I´ve recently got a Witson HU (MTCD 1.97a) with the Canbus adapter for my Fiat Bravo (2013).
The steering wheel controls function ok (vol up, vol down,...) but i´ve seen another HU displaying "door opened" or other msgs (displayed in center car display), overwritten on HU display that look like the ones that appear when you change volume...
I tried various canbus settings (i found 2 different for the Fiat Bravo) but neither of them works as aspected. One is ok for the steering wheel controls and the other does nothing. But again... no extra msgs on screen.
Is it ok like this? Maybe the canbus decoder only works for those msgs, and ignore the rest of the canbus data...
any ideas would be appreciated!! thanks in advance!
greetings from Argentina!
Click to expand...
Click to collapse
That feature doesnt necessarily work on all cars, look for an app like "Car settings" or "Car service" in the apps when you have it set on the 2 Fiat Bravo CAN Bus setting, if you cant find it anywhere, go through all apps, if you still cant find anything, then that feature is not supported. You could also try any other Fiat CAN Bus setting, or maybe Lancias, Alfa or even some Chrysler vehicles theyre all made by FCA so there is a possibility it may work, probably not but worth trying.
You could also try the menu on the car, I know on the Bravo you can control some stuff on the factory nav unit, if you didnt ahve nav in the car it may be a case of turning the feature on via the car before it will work.

After typos1 tip, i set the canbus mode to ALFA ROMEO. The display shows an overhead view of a car, with the doors or boot being opened. Great!!! BUT... i lost steering wheel controls. Bad!!
So i´ll wait for an OS update to fix this thing.
The calibration screen for steering wheel controls doesnt show any option, in any case.
thanks again!

_javi_ said:
After typos1 tip, i set the canbus mode to ALFA ROMEO. The display shows an overhead view of a car, with the doors or boot being opened. Great!!! BUT... i lost steering wheel controls. Bad!!
So i´ll wait for an OS update to fix this thing.
The calibration screen for steering wheel controls doesnt show any option, in any case.
thanks again!
Click to expand...
Click to collapse
Ah, thats annoying.
The OS has nothing to do with it, its the MCU that deals with this sort of stuff, so an OS update for wont help, an MCU update may do IF they add full support for the Bravo and theres no guarantee that they will.
Some cars have CAN Bus but use resistive SWC (my Alfa is like this, but some Alfas do have CAN Bus SWC) which could explain it.
There may be a way round it if you buy an SWC adapter for your car. These headunits supposedly use the same SWC protocol as Pioneer, so if you got a Pioneer/Fiat Bravo SWC adapter, disconnected the 2 SWC wires from your CAN Bus box and attached them to the SWC adapter it would convert the CAN Bus SWC signal from your car into resistive so the stereo can understand them. AFAIK this has not been done before but it should work.
EDIT : didnt spot the bit about the SWC calibration not showing up, damn, I guess you could extract the SWC app using the app "APKextractor" and see if it installs when the stereo is in Alfa Romeo CAN Bus mode.

typos1 said:
EDIT : didnt spot the bit about the SWC calibration not showing up, damn, I guess you could extract the SWC app using the app "APKextractor" and see if it installs when the stereo is in Alfa Romeo CAN Bus mode.
Click to expand...
Click to collapse
browsing other threads i saw there are users with the same issue. SWC app shows just a blank screen (with save and reset buttons on top).
I´m still studying this (among other things... the mtcd HU is nice.. but it looks like it needs polishing)

hi, is your witson still working?

Related

Huifei android 4.4 for alfa romeo 159

Hello to all
I apologise if this is in the wrong section.
I've searched high and low for info on how to get steering controls to work. My alfa 159 has no blue and me just standard head unit set up. I purchased this unit guaranteed to work with alfa 159. I purchased the head unit from kaigele.
Basic signals from can bus interface box are all working ignition,park brake, illumination and speed pulse.
The new head unit has can bus input which i'm assuming is for steering controls. In factory setting page the can bus setting is set to Alfa Romeo. Not sure what else to do. I'm hoping someone out there can help me. Thanks in advance.
Silly question..but have you tried mapping the steering wheel buttons under the settings menu?
You might want to make that clear that you have accessed that menu and there is no reaction...
Just a thought...
Good point. I wish it was that simple. I have tried mapping the buttons in the setting menu. Nothing works. Any idea's?
Sent from my SM-G900I using Tapatalk
One other thing worth noting, i purchased the car with another after market head unit, again with steering controls not working. This is why I purchased the Huifei unit. After installing the new unit and finding that the buttons dont work i did a can bus scan using fiat scan software. This tells me that the radio node has been removed from the network. This can only be done via proxy alignment. I'm thinking this was done when the other after market head unit was installed. Do you think that when the proxy alignment was done, it may have disabled everything associated with the radio node including steering wheel controls. Only a thought??
Sent from my SM-G900I using Tapatalk
i think nobody understands what you writing..too complicated
I think you need to leave part of the original stereo in the Alfa and then do a cam reset, otherwise the cambus sees something is wrong and disables it (as you're seeing).
That's my understanding, but don't take it as gospel.
Given that the last post here was October, you've probably worked it out anyway, in which case if you have a working solution to the "I want an Android HU in my 159" question, I'd appreciate hearing it.

Steering wheel control mapping help.

Evening all.
I have an xtrons 4.4 HU, it's fitted with a canbus decoder in and Audi A4.
The HU came with the steering wheel controls preset, I've tried to map them to add my own touch but I can't. When I go into the steering wheel control option, I operate a key and he screen does not recognise this, I've also tried highlighting a button then trying to use a steeeing wheel button and it still doesn't recognise it.
What ami missing guys? All the YouTube and Google tutorials say to do it how I am!
Thanks.
I have the same issue on a 2012 Mazda 3, the head unit only recognizes a direct voltage input from the steering wheel buttons, yours is probably controlled by the CANBUS, with the head unit, there should be 2 wires (Key1 and Key2), they should be connected to the car wiring I believe. Please wait for someone with more experience to confirm.
Sent from my SM-N910F using Tapatalk
From what I've read they are connected through canbus but I have no idea how to work around this. Thanks.
Anyone? Tried downloading the rk1188 headunit app but it does nothing!
interested about!
Anyone please?

Steering wheel control problem between Autoradio 8227L and Toyota Yaris II series

Hi everyone, I hope to be writing in the appropriate section.
I bought an 8227L android car radio:
- http://imageupper.com/s12/1/6/M1568803747176376_8.jpg
- http://imageupper.com/s12/1/6/M1568803747176376_6.jpg
And I have a Toyota Yaris II series:
- http://imageupper.com/s12/1/6/M1568803747176376_7.jpg
This morning I successfully mounted the 8227L stereo in my car
- http://imageupper.com/s12/1/6/M1568803747176376_5.jpg
and everything works fine except the steering wheel controls.
The old original car radio (where steering wheel controls worked) was so connected:
- http://imageupper.com/s12/1/6/M1568803747176376_4.jpg
And when mounting the new autoradio 8227L, I just inserted the cables in the appropriate adapters.
The fact is that as soon as I enter the steering wheel configuration menu, I press START and select a command to associate with a physical steering wheel button, I get an error:
- http://imageupper.com/s12/1/6/M1568803747176376_3.jpg
even trying to reboot:
- http://imageupper.com/s12/1/6/M1568803747176376_2.jpg
- http://imageupper.com/s12/1/6/M1568803747176376_1.jpg
I still get the same error.
Can u help me in some way? Thank u all in advance!
As a first step, I would put a voltmeter onto the sense wires while pressing each of steering wheel buttons- to confirm that different voltages are available for the head unit to learn
This wil prove or otherwise that the wiring is in order.
Hi Pxdev,
First of all thank you very much for your attention.
At the moment I do not have the possibility to use a voltmeter, however I am sure that the steering wheel controls work (tested up to a few hours before the installation of the new radio) and also the installation of the new radio has simply consisted in disconnecting the 3 connectors ( http://imageupper.com/s12/1/6/M1568803747176376_4.jpg the blue and the two whites) visible in the picture and insert them in the appropriate adapters of the new car radio and insert a single connector in the special housing and everything worked, except, of course, for the steering wheel controls. Is there anything else I could try to do? Many thanks in advance.
Hi,
Have you bought it with the Canbus and cables for your car? I have the exact same unit and the steering wheel works well.
I get the same error , found a video saying ground one wire to radio ground and any one key wire ground radio but doesn't work. If anybody has any solution or troubleshoot guide please let me know .
Checked voltage , voltage from headunit around 3.5v , checked resisitance from each key shows different value for each key. Now what to do?
Did you find a solution to your problem as I'm having the same problem with mine. Same head unit with a Raise can bus installed. The steering wheel controls worked fine when I first bought the car but I decided to delete some of the unused apps and since then the steering wheel controls don't work. I can't even remember the name of the app I deleted. Any help would be grateful.

Bosion Head Unit PX6 Android 10, 10" Display - Steering Wheel Controls

I have a Bosion PX6 Android 10 head unit.
My car is a Toyota Camry 2010 that came with a basic radio with XM radio and the Bosion 10" is an amazing upgrade for this car.
I am having a problem with the steering wheel controls as they don't set up with the button setup in the vehicle setup menu. I have tried many times with different settings.
The buttons on the left side of the steering wheel sort of work, the ones on the right do not seem to work at all.
In the hidden menu the various CANBUS settings don't really make any difference. There's like 10 different Toyota settings but all act the same as setting the Canbus to 0 (no Canbus?).
Anyone have any suggestions to resolve this?
I'm also looking for Bosion contact info or web page.
okay, the key is in the hidden menu or factory menu, you really need to search (depending in the canbus module you have) the car maker and model.
The canbus must show up and report the version.
The menu you find to setup the buttons in the android will never work.
hang in there you'll get it.
cowboypt said:
okay, the key is in the hidden menu or factory menu, you really need to search (depending in the canbus module you have) the car maker and model.
The canbus must show up and report the version.
The menu you find to setup the buttons in the android will never work.
hang in there you'll get it.
Click to expand...
Click to collapse
It sounds like you know what you are talking about. Fyi that I have been through the hidden menu. When you say the canbus must show up and report the version, I am not clear on what you mean. I have tried all 7 or 8 Toyota canbus configs and when I select any, the phone loads an associated program and reboots. None are really making any difference, always the left buttons kind of work and nothing on the right.
Any suggestions you have would really be appreciated.
Where you see the kernel version, os version and mcu version you must have also canbus version.
Can't show it to you now but you should see something like simple and version as 1.13.something
If nothing is there, the canbus config is not yet correct and radio can't detect correctly the canbus box. But you say that some steering wheel buttons are working. In this case. It seems to me that the canbus module in the radio is not yet updated to your car or the canbus box firmware is also not with a version where your car is supported. Contact the seller and claim if you still have time for it.
UPDATE: added aftermarket canbus box has corrected 90% of the buttons. The remaining button is the Voice button to issue voice commands to the phone. This is not a choice within the head unit button mapping. I suppose I should try a different car selection (?).
Anyone know if there is a website for Bosion for manuals and updates?
I don't think so :/ I've tried to get some answers from manufacturer but they aren't well informed, i think. Or they are not willing to tell a secret :/
rkrigsman said:
UPDATE: added aftermarket canbus box has corrected 90% of the buttons. The remaining button is the Voice button to issue voice commands to the phone. This is not a choice within the head unit button mapping. I suppose I should try a different car selection (?).
Click to expand...
Click to collapse
what can bus did you buy? for what car?
The car was a Toyota Camry.
kontosoglou said:
what can bus did you buy? for what car?
Click to expand...
Click to collapse
Sorry for the delay, I have an aftermarket box from PAC called SW1-RC-1 which works 95% perfectly and allowed me to program the buttons as normal.
I have a 2010 Toyota Camry.
The only issue is the Bosion PX6 Android "10" is that in the setup for the canbus within the head unit, there is no button to map to for the voice button to on the steering wheel. Seems like a very odd issue as the voice button is so normal and I'm still looking for an update or a way to find that button in settings.

[PX5] [RK3368] [S32F0] Autotop Android Headunit - Backup Camera Trajectory Settings and Carplay / Android Auto not working

Hey guys,
I recently bought a Headunit for my Opel/Vauxhall/GM Vectra C by the brand Autotop on AliExpress.
More information here : https://www.aliexpress.com/item/33064243426.html?spm=a2g0s.9042311.0.0.4d374c4djb2lMm
It is a RK3368 unit with 4gb RAM and 64gb ROM and Carplay function. I mainly bought this unit because I expected two main features from it.
Firstly I wanted to be able to have plug and play Android Auto and the unit came with a dedicated usb cable that had the label carplay on it which only fit in one slot on the back of the radio. Sadly when I plugged my phone in nothing happened so I assume that the unit is in fact not Android Auto ready even though the description says so. Am I doing something wrong/ Do I have to set up Android Auto in some way, first?
I also want to install a backup camera and I saw in some other youtube videos that the PX5 Android 9 and Android 10 devices have something called "Extra Settings" where different parameters of the backup camera can be adjusted. One of the things that can be adjusted is the calculation of the reverse trajectory of the car which is a feature that I would really like to have.
Unfortunately my headunit only has "General Settings" "Factory Settings" and "Steering Wheel" settings. And none of these settings contain any adjustments for the backup camera.
Is there a way to "unlock" these extra settings or are they just not present in my Android Build ?
Ive attached my Build Number for further information down below
Thanks in advance for your help!
Yesterday i also got my PX5 4GB/64GB for my Vauxhall Insignia / Buick Regal 2016.
1. I am also missing the "extra settings". There are some options that might solve my other problem with my...
2. Steering wheel Buttons not working. They are working but not in the android Unit, just in my Board Computer
3. The Board Computer doenst seem to communicate with my new Android Radio ...
It was also said Plug and play and in the Describtion they had an image of exactly the same original Radio that i have/had...
I am so dissapointed but i think there is a wrong Setting in the Factory Settings (code 126) - here a Video of my Settings:
and this is waht i see, when i try to programm the steerin wheel buttons (attachement)
I think it comes all togehter on either the missing "Extra Settings" or in a wrong setting in the Factory Settings :-(
I have the same problem with steering wheel buttons. I got a PX5 4GB/64GB Erisin
Carplay dont work at moment, I am thinking to update de firmware...
https://www.aliexpress.com/item/1005001834561873.html
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
Now they work but i still can not programm each button to another function. Still grey screen.
I
DaGamma said:
i found out that a cable was not connected to the steering wheel.
I had to open the plastic-frame above the steering wheel and there was a connector.
View attachment 5216727
Now they work but i still can not programm each button to another function. Still grey screen.
Click to expand...
Click to collapse
I can to program each button in Factory settings --- key --- canbus key setting, they work for me
Can you change the language of the car? After installing the language changed to english from the tachometre. In the car app there is no setting to change language.
I dont mean the android language,

Categories

Resources