XTRONS PA17GFVPL-LB on VW Golf MK7 - Android Head-Units

Hello,
I have an XTRONS PA17GFVPL-LB mounted on Golf 7. When I mounted it all worked correctly. After a few days, the communication with canbus started to work intermittently. So I asked for the replacement of the canbus decoder; which did not solve unfortunately. The xtrons support then asked me to upgrade to MCU GS v2.88, but also this action did not resolve the issue. The strangeness is the following: the radio sends correctly messages via canbus (I can set all the details such as units of measurement, radar sound tone, intensity of lights etc.) but it has some difficulties while receiving messagges (input from the steering wheel buttons and reading values ​​such as temperature or values ​​set above), meaning the "receiving" is intermittent, it works 1 time out of 5. However, in the rare cases the unit works fine, everything is fluid and perfect.
I also tried to unplug the car battery and / or the canbus fuses, hoping it would unlock somehow, but no way.
I tried all 100+ possible canbus combinations in the "factory settings" settings. The only one that works is the "35 Golf 7".
The xtrons unit is not blocked by particular processes, when it works everything is smooth, even with waze and spotify active together.
Xtrons says they do not have a more specific decoder for Golf Mk7 than the one they gave me. Below the link to the pictures of the canbus decoder I'm using, supplied by Xtrons. On Roadnavi.com I found the C257 for golf 7, I think I'll buy it, but I have no clue whether it is compatible with the unit.
Pictures link -> postimg[dot]cc/gallery/p2ue7cxo/
does anyone have any clue?
Thank you

Related

Experience Android Unit for VW Touareg 1 (7L) - Year 2008 ?

Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
no one use a Android Car Unit in the Touareg ?
http://backly.ru/go/1f7n
Hi
Thx for response.
Did you have experience with that Unit?
Can the Radio read the Door or/and Park Sensors?
Regard
Ben
ben97 said:
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
Click to expand...
Click to collapse
Same here, mine is a px3 android 7.1....... any luck? Have you been able to fix it? My backup diplay works perfectly on ford focus canbus setting....
Hi
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))#### do you still use this one??
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys ##### mine just rhe volume works.
##### if i press Phone in the stering wheel it just play next sont
####the star key in the wheel does nothing
Can you help?
2006 touareg
Thank you
Hello guys,
I have the exact same problem with a Erisin PX5/4gb/Android 9.0, but I have a Treg from 2005 with Canbus 1.6. I have contacted Erisin, sent them my original wiring diagram and am waiting for their response. in the meantime I have the latest MCU updates, I'll try them today.
Have you tried the Canbus setting VW_TOUAREG(Hiworld) ? For me it doesn't work, but maybe for those of you who have Canbus 2.0 will work.
If I find a solution or I have any news I'll post them here, hope you do the same, maybe we will get this unit to decode all the signals from Can-Bus.
If anyone wants the updates images, just let me know and I'll upload them.
Regards,
O

Android PX3 head unit changed speedo to KM from MPH

Hi ive recently bought a android PX3 head unit, installed it ok but it has changed my milage into KM as im in the UK i need the speedo in MPH, there is a app installed called control settings, in this there is a milage setting set to < KM > but it wont change, most of the settings in the control settings app like temp set to C wont change to F either, indicators set to one flash etc the only setting that i can change is CD indicator.
would anyone know if this could be a software bug with the MCU or the android version?
where would i look for a update? i dont even know who the manifacturer is.
The head unit has no physical buttons only a reset hole so can anyone please tell me how i would get to the recovery screen?
ive never had a android head unit before so dont know much about these units.
Can anyone please help me change/fix this setting or another app or update i can install that can change the milage back from KM to miles,
model px3
android 7.1.2
kernel 3.0.101+
mcu MTCE_KSP2_V2.70a_1
thanks for any help
regards
aliexpress.com/item/Android-7-1-7-Car-DVD-player-GPS-Navigation-Stereo-Audio-Radio-DVD-for-Ford-Fiesta/32839001963.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_5000015_10151_10344_10068_10130_10324_10342_10547_10325_10343_51102_10340_10341_10548_5130015_10192_10190_10084_10083_10307_10301_10303_10312_10059_10313_10314_10184_10534_5790011_100031_10604_10103_10605_10594_5060015_10142,searchweb201603_36,ppcSwitch_5&algo_expid=239a9acb-5370-48d4-8bfa-8a9d42e57358-35&algo_pvid=239a9acb-5370-48d4-8bfa-8a9d42e57358&transAbTest=ae803_5&rmStoreLevelAB=5
https://www.ebay.co.uk/itm/CTSFO004...sh=item4413f7f882:g:bXAAAOSwhChZrEtd#shpCntId
would this work with the HU, just connect upthe 3 wires? and not connect the HU plug connector that goes to my info screen?
regards
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
did you ever get your problem sorted as I now have the same problem
Hi no the seller didnt want to know and just fobbed me off for months before blanking me on whatsapp, no firmware updat as promised, nothing, so what i did was got a set of these:T - 3 Car Intelligent Steering Wheel GPS, hang up/answer, volume setting, music Controller with Noctilucent Function buttons https://www.aliexpress.com/item/Zee...191.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J whicc work quite well, ive also recently ordered a button stalk like how the older radion buttons were: Car steering wheel button remote control lights car navigation DVD / 2 din android Bluetooth wireless Universal remote control,
https://www.aliexpress.com/item/Car...596.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J but im still awaiting delivery of it.
ill be very happy with the stalk as well as the buttons ive stuck to the centre consol, no where near as cool as the steering wheel controls but i really needed my speedo in MPH
anyways hope this helps somewhat not perfect but better than the speedo flashing between KM/MPH
regards
shadowfoxmi said:
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
Click to expand...
Click to collapse
I know this is old but I have the same issue with my Joying head unit and my BMW e90. On start up, I have to go into my settings and set everything to American/Imperial units. Did you ever find a fix to this? It's driving me nuts.

Intel sc9853i SWC issue

Hello, I'm writing here with a hope that somebody can diagnose the problem I have.
Recently I bought a android head unit radio that is based on joying os (it looks the same actually). I have a canbus box and I think everything is connected properly, however the swc control is not working. I checked all the canbus decoder protocols that are for my car brand in factory settings.
I managed to find an option "print protocol" which shows a can signals that gets through to radio. I can't post videos but it prints all the buttons presses and releases in hex format, but the headunit is not responding to them. Does this mean that canbus decoder is faulty? Or this mean that I'm missing something software wise?
I ask this question because I still have a dispute time on aliexpress and if this is hardware issue I might be able go get canbus box replacement.
Thanks in advance.

9" Android YT9216B steering wheel control problem

Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
J0NS said:
Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
Click to expand...
Click to collapse
What did the reseller suggest when contacted for after sales support.
marchnz said:
What did the reseller suggest when contacted for after sales support.
Click to expand...
Click to collapse
My brother has sent a message to the seller querying about the steering wheel control issue, but no response yet, unfortunately.
Okay, good news. My brother managed to sort the issue. For anybody who has the same problem, here are the details of the fix that worked for him:
Coming from the 9" Android headunit there's a wire called 'Key 1'. This Key 1 wire needed to be connected to the red/blk wire of the Mazda's headunit wiring harness.
I should also mention that his Mazda 6 GG has the non-Bose stereo, however, as seen in the attached image, the non-Bose and Bose headunits both have the same red/blk wire.

ISUDAR T72

Hello everyone, i'm new here and know nothing about this stuff but im learning slowly . I bought at local dealer this radio Isudar T72 10'' screen, 4GB/32GB and place it in a VW Golf 7. everything is working fine and im happy with it but every then and there after the ignition of a car audio starts but screen is DEAD.
If i press buttons on a radio after half a minute screen gets activated. Next time radio works fine and so on......
I have also replaced the radio with a new one and today this error happend again. I been told that could be some error with CAN BUS of a car and the radio?!
Does anyone have any idea what could be a problem??
Thanks and bye
Hello. Do you have it properly wired and set to MQB?
How to connect car radio for MQB car(T72)
1. Connect the cable like this photo. 2. Pls connect car radio to wifi. 3. Choose car module on setting-factory setting-123456- select module.4. Choose canbox -Raise- VW- MQB- then pubic.
www.isudar.com
If you have a defective canbus box, write to the seller to send you a new one, or contact Isudar and buy a new one, specifying that you need an MQB golf 7.
ISUDAR Car Canbus Box
For some car dvd, the canbus is necessary. What conditions need to buy it? Your car is advanced configuration: With air conditioning display. With digital power amplifying speaker. With ceiling display.
www.isudar.com
Isudar T72 has TS10 UIS7862, try searching here, maybe someone has solved the same problem:
New TS10 UIS7862 6gb ram 128gb head unit q&a's
So I bit the bullet and bought myself this head unit: https://a.aliexpress.com/_9JZiHu Ad stated that unit is 4gb ts8, but unit shipped and arrived is 6gb TS10. Plugged everything up unit works nice and smooth as expected, but one seriously...
forum.xda-developers.com
Try turning sleep on or off in the settings, page 16:
https://cdn.shopifycdn.net/s/files/1/0058/3834/0178/files/T72_2.pdf?v=1620980721
Thanks for the reply.
Just because i was affraid of this problems i took a car to this dealer who installed everything. Also as he said he never had problems and been already installing into this kind of cars. Now he sent me second radio but without canbus module. The error is the same.
My original radio didnt have separated MOB and it was all installed directly into the screen. Sleep mode doesnt affect much and its just too long to be activated every day.
Maybe we need to think also about replacing this canbus module.
I will check your links.

Categories

Resources