9" Android YT9216B steering wheel control problem

9" Android YT9216B steering wheel control problem - Android Head-Units

Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.

J0NS said:
Hi All,
My brother just purchased an all-in-1 9" Android head unit + facia for his 2005 Mazda 6 (GG). Listing can be seen here:
9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 | eBay
Find many great new & used options and get the best deals for 9" Android Car Stereo Non-DVD Player GPS Media For Mazda 6 Atenza GG AU 02-08 at the best online prices at eBay!
www.ebay.com.au
He has installed the unit and everything works fine while the car's ignition is only turned to accessories. However, as soon as he turns the car key 1 click further to power up the ignition (but the not has not yet started), the steering wheel controls go nuts. That is, once the key is turned to ignition, it's like one of the steering control buttons is constantly being pressed and the head unit either continually skips through songs or it continually skips through tuning radio stations, depending on whether the unit is set to playback songs or to the radio. Curiously, this problem doesn't occur when only the accessories are powered on (ignition not yet powered on).
The details of his unit are shown in the attached image. He currently has the steering wheel controls disconnected due to the issue, which I'm guessing is why the unit shows "Ruishengwei-Mazda6--disconnect".
I did some searching but didn't find anyone else reporting this issue. Anybody have any insights as to what might be the issue? If so that would be greatly appreciated.
Click to expand...
Click to collapse
What did the reseller suggest when contacted for after sales support.

marchnz said:
What did the reseller suggest when contacted for after sales support.
Click to expand...
Click to collapse
My brother has sent a message to the seller querying about the steering wheel control issue, but no response yet, unfortunately.

Okay, good news. My brother managed to sort the issue. For anybody who has the same problem, here are the details of the fix that worked for him:
Coming from the 9" Android headunit there's a wire called 'Key 1'. This Key 1 wire needed to be connected to the red/blk wire of the Mazda's headunit wiring harness.
I should also mention that his Mazda 6 GG has the non-Bose stereo, however, as seen in the attached image, the non-Bose and Bose headunits both have the same red/blk wire.

Related

Joying for Ford Mondeo?

Hi,
I'm looking for some info about "carjoying.com/ in-dash-gps-navigation-system/ford-head-units/joying-best-android-4-4-4-kitkat-head-unit-quad-core-1024-600-double-din-7-inch-gps-navigation-system-16-gb-memory-support-steering-wheel-control-wifi-obd-airpaly.html"
My car is Ford Mondeo Mk4 2007 year. In description is stated that this device is compatible with Mondeo 2007-2010. I contacted with Joying and they sad that this device is NOT compatible with my car. I'm confused.
Did someone use joying device in Mondeo MK4?

dtrifonov said:
Hi,
I'm looking for some info about "carjoying.com/ in-dash-gps-navigation-system/ford-head-units/joying-best-android-4-4-4-kitkat-head-unit-quad-core-1024-600-double-din-7-inch-gps-navigation-system-16-gb-memory-support-steering-wheel-control-wifi-obd-airpaly.html"
My car is Ford Mondeo Mk4 2007 year. In description is stated that this device is compatible with Mondeo 2007-2010. I contacted with Joying and they sad that this device is NOT compatible with my car. I'm confused.
Did someone use joying device in Mondeo MK4?
Click to expand...
Click to collapse
Hello
because now most of china OEM DVD Player factories can not resolve the ford Convers +problem ,their canbus can not work with the system ,so steering wheel control ,and convers+ information can not display on the dash ,that's why Joying can not support on your car . If you have Ford car ,when you want to buy a new DVD player ,better give a picture of your dashboard to the sellers ,and consult them about convers +

Hi,
I've sent them a picture of my dashboard and they said their device is not compatible with my car.
Obviously I'm going to buy an Eonon unit. Their devices at least have support for steering wheel.
Thank you for the help.

This video seems to be proof that some unit can talk with Converse+
https://www.youtube.com/watch?v=eXlzYQMlK7w

hypetaxx said:
This video seems to be proof that some unit can talk with Converse+
https://www.youtube.com/watch?v=eXlzYQMlK7w
Click to expand...
Click to collapse
Resurrect an old thread. Interesting video, we don't know what the unit is or who the supplier is (both of the Canbus and Headunit)? Does anyone know what the current state of affairs is regarding Android 5.1 Headunits and Convers+ ?

sim36 said:
Resurrect an old thread. Interesting video, we don't know what the unit is or who the supplier is (both of the Canbus and Headunit)? Does anyone know what the current state of affairs is regarding Android 5.1 Headunits and Convers+ ?
Click to expand...
Click to collapse
I'll second this 'bump' as I too am looking for a solution to get full Convers+ functionality with my Android head unit (Auto-Pumpkin in a Mondeo Mk4) :good:

Seems that the Convers+ issue has not been resolved yet....
on the Joying page there is a blog that clearly states:
And you can installed our Ford Special Car Radio directly in your Ford II (2008-2012), Mondeo (2007-2011), S-MAX (2008-2010). But all of our Android Car Radio cannot support the Ford Converse+ system.
I have seen youtube videos that show otherwise.
So what does support really mean in this case?

Bonairian said:
Seems that the Convers+ issue has not been resolved yet....
on the Joying page there is a blog that clearly states:
And you can installed our Ford Special Car Radio directly in your Ford II (2008-2012), Mondeo (2007-2011), S-MAX (2008-2010). But all of our Android Car Radio cannot support the Ford Converse+ system.
I have seen youtube videos that show otherwise.
So what does support really mean in this case?
Click to expand...
Click to collapse
I have found this: https://www.youtube.com/watch?v=WXXcxf1RFqk
The pre-facelift convers+ works with kitkat 4.4.4.

still says no convers+ ( i dont even know what that is), but I know there is a new 2GB unit for the Mondeo:
https://www.carjoying.com/new-andro...lollipop-gps-navigation-fm-am-rds-easy-c.html

I got Xtrons pf75fsfa 5.1 unit for my Mondeo mk4 2008. It works with steering wheel buttons, but not with display (i have small display, not converse).
The unit is working surpringsly well - radio reception is good, gps is fast, sound is much better than the oem cd6000.
I have some wishes for the software, but for now is perfect.

imitev said:
I got Xtrons pf75fsfa 5.1 unit for my Mondeo mk4 2008. It works with steering wheel buttons, but not with display (i have small display, not converse).
The unit is working surpringsly well - radio reception is good, gps is fast, sound is much better than the oem cd6000.
I have some wishes for the software, but for now is perfect.
Click to expand...
Click to collapse
What about phone control buttons?
My phone cotrol stalk not responding. Buttons are death. Only volume buttons, M-button and forward-backward buttons work.
:{ :[

I haven't phone buttons.
Do you have CANBus box?

imitev said:
I haven't phone buttons.
Do you have CANBus box?
Click to expand...
Click to collapse
Yes. I have canbus box attached to the HU wiring. But phone buttons are not recognized.
No idea where is the problem.
http://www.ebay.co.uk/itm/Ford-Mond...763400?hash=item28204f5b08:g:ZUYAAOSw-0xYehSK this HU I bought
this buttons doesnt work: http://thumbs.ebaystatic.com/images/g/1LEAAOSwCU1Yq~YI/s-l225.jpg

I think that canbus box doesn't interpret them and they won't work.

gtracz said:
Yes. I have canbus box attached to the HU wiring. But phone buttons are not recognized.
No idea where is the problem.
http://www.ebay.co.uk/itm/Ford-Mond...763400?hash=item28204f5b08:g:ZUYAAOSw-0xYehSK this HU I bought
this buttons doesnt work: http://thumbs.ebaystatic.com/images/g/1LEAAOSwCU1Yq~YI/s-l225.jpg
Click to expand...
Click to collapse
I have the same problem with my head unit. The phone controls does not work. The volume buttons works. Is it possible with BOSION can bus will have a result? Does anyone have the BOSION can bus diagram for CAN-TX / RX?

Experience Android Unit for VW Touareg 1 (7L) - Year 2008 ?

Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben

no one use a Android Car Unit in the Touareg ?

http://backly.ru/go/1f7n

Hi
Thx for response.
Did you have experience with that Unit?
Can the Radio read the Door or/and Park Sensors?
Regard
Ben

ben97 said:
Hi There,
I have an VW Touareg I from Year 4/2008. It is the Facelift Model with CANBUS 2.0
Buy a Erisin 5056T Unit (PX5 / 2 GB) with integrated VW CANBUS Decoding Box (Decoder inside the Radio it´s not external Box).
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys are running (can´t change any Responsible of keys in the Unit) seems hard coded
Screen for Camera Switching if i switch my gear into Reverse
Whats not running:
NO , really no Data inside the vehicle App.
Reaktion of draw lines for the backwards Camera change/move only when i turn 100% left or Right on the Steering Wheel. And only for millimeters....
Is there any Experience with other Units that can better Communicate with VW Touareg?
Regards
Ben
Click to expand...
Click to collapse
Same here, mine is a px3 android 7.1....... any luck? Have you been able to fix it? My backup diplay works perfectly on ford focus canbus setting....

Hi
Inside the Unit i try different Types of CANBUS settings (Default was 1 (VW / Scoda))#### do you still use this one??
I am little Frustrated because of the limit Implementations of decoding CANBUS Signal inside this Unit.
Whats running:
ACC Signal (Radio turn on when i plug IN the Car Key and go into "Sleep Mode" when i pull the Key out.
Steering Wheel Keys: Only Loud / quiet / Phone / Mute keys ##### mine just rhe volume works.
##### if i press Phone in the stering wheel it just play next sont
####the star key in the wheel does nothing
Can you help?
2006 touareg
Thank you

Hello guys,
I have the exact same problem with a Erisin PX5/4gb/Android 9.0, but I have a Treg from 2005 with Canbus 1.6. I have contacted Erisin, sent them my original wiring diagram and am waiting for their response. in the meantime I have the latest MCU updates, I'll try them today.
Have you tried the Canbus setting VW_TOUAREG(Hiworld) ? For me it doesn't work, but maybe for those of you who have Canbus 2.0 will work.
If I find a solution or I have any news I'll post them here, hope you do the same, maybe we will get this unit to decode all the signals from Can-Bus.
If anyone wants the updates images, just let me know and I'll upload them.
Regards,
O

Xtrons and Volvo

Hi everyone, I’m new to this forum. I know a bit about Volvo (the older ones!), and Volvo head units, but not about Chinese Android head units.
I’m considering replacing the aging head unit of my (also aging!) 2002 Volvo V70. The head unit is a simple HU 603, so no Dolby, center speaker or extra amplifier. I’m looking at Xtrons TA702P (quad core) or TB706PL (octa core). I prefer a 7 inch touch screen, no knobs, no DVD. But navi should be good, as would radio. Music I can play through usb. And my Elephone S7 (Android 7.1) phone should mirror on the unit if possible.
Other functions like back up camera or steering wheel control are not important to me.
I know how to take the HU 603 out. I know I need an adapter harness to connect with the new unit. And a fascia adapter. All that is available.
My questions:
Xtrons has many car/model specific head units (not for Volvo). They have Canbus decoders supplied with the unit. Not so for the TA702P or the TB706PL. Will that give problems? (The answer from the ebay seller is somewhat useless: ‘Both the TB706PL and the TL702P does not come with the canbus so that you just ignore it.’) Anyone has experience with this?
How are user experiences with these modern Xtrons units? I know, ‘you get what you pay for’, I know that. But still, worth the money?
Units from Kenwood or Pioneer are other options, but again, is it worth it?
Thanks!

Hi there
I own and drive a V70 from 2006. I have replaced the original HU with a SONY 2 DIN unit (XAV-V630BT). This unit has great sound. I also swapped the speakers to JBL. It is totally worth it.
I have a CANbus to resistor unit. This makes it possible to use the steering wheel buttons.
Right now i am testing a Android HU. Unfortunately i have bought the wrong one. The unit is full of bad design choices. The sound integration in the unit is bad. I think that radio, BLUETOOTH and AUX sound runs directly to the sound processor. This means that when the Android unit plays a sound, the sound from the other units are turned off. In my opinion the other source should just fade a little.

jacobwind said:
Hi there
As said, I don't need steering wheel controls, my steering wheel doesn't even have the buttons. Must have been a cheapskate first owner!
Does this mean the Canbus only affects steering wheel control? So ignoring Canbus (no resistor as in your case), will give no problems?
And yes, by now I've found out Android units may not have the best sound quality. Or radio reception.
Click to expand...
Click to collapse

PX6 with skip track/next track button or bluetooth remote?

Hi,
I have old cars without steering wheel stereo controls. But maybe some cheap new cars still don't have these, so some may relate.
Universal 2din Head units with px6 4gb and 7" screen (there would be space for more ) don't have skip track/next track button.
I also tried to find if there is way to use some Bluetooth remote with these units, but all info seems to be that it does not work.
I don't want to hard wire controls to steering wheel.
Is there some head unit that I missed? Is there a way to make bluetooth remotes work?
Maybe something with sc9853i has next track button?
BTW i found this video https://www.youtube.com/watch?v=wptzk5W6uxI - i did not know there were any px5 with matte screen!

Eonon GA453B (2gb / 32gb) - car connection issues - B6 passat

Hi all,
I know this isn't a car forum, but car forums usually aren't android forums
I'm entering the world of Android HUs, after spending the last 5 years in the world of android media units.
Recently bought an Eonon GA453B - let me know if you want system info etc.
Only seems to run when I bypass the CANBUS connector for power.
Steering wheel controls work, and the HU picks up doors open, battery voltage etc.
But I need to connect two wires together that bypass the CANBUS and therefore the HU to powered on ALL the time, draining the battery over a few days.
I can even walk past my car, and my phone connects to its Bluetooth.
I have a VW passat r36 (b6), and the OEM headunit works fine.
Any ideas?.
Thanks a lot.

Database Users

welcome