Hi just brought this unit 9.7 inch android radio have got working steering wheel controls ....
question 1... has anybody got the onscreen clitmate/heating controls to work by touching the screen
Question 2 on the inbuilt display theme it shows when the doors are opened ive installed carwebguru but it doesnt show them anymore
anyone know how to get this back and also ive read somewhere that the protocol for GM Buick might not be the right one to use for the vauxhall insignia
any help would be most greatful
Hello, looks like we both have this unit in our cars. Remember the Factory settings are actually wrong with saying parameter its on - but its in real off.
Related
Hi ive recently bought a android PX3 head unit, installed it ok but it has changed my milage into KM as im in the UK i need the speedo in MPH, there is a app installed called control settings, in this there is a milage setting set to < KM > but it wont change, most of the settings in the control settings app like temp set to C wont change to F either, indicators set to one flash etc the only setting that i can change is CD indicator.
would anyone know if this could be a software bug with the MCU or the android version?
where would i look for a update? i dont even know who the manifacturer is.
The head unit has no physical buttons only a reset hole so can anyone please tell me how i would get to the recovery screen?
ive never had a android head unit before so dont know much about these units.
Can anyone please help me change/fix this setting or another app or update i can install that can change the milage back from KM to miles,
model px3
android 7.1.2
kernel 3.0.101+
mcu MTCE_KSP2_V2.70a_1
thanks for any help
regards
aliexpress.com/item/Android-7-1-7-Car-DVD-player-GPS-Navigation-Stereo-Audio-Radio-DVD-for-Ford-Fiesta/32839001963.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_5000015_10151_10344_10068_10130_10324_10342_10547_10325_10343_51102_10340_10341_10548_5130015_10192_10190_10084_10083_10307_10301_10303_10312_10059_10313_10314_10184_10534_5790011_100031_10604_10103_10605_10594_5060015_10142,searchweb201603_36,ppcSwitch_5&algo_expid=239a9acb-5370-48d4-8bfa-8a9d42e57358-35&algo_pvid=239a9acb-5370-48d4-8bfa-8a9d42e57358&transAbTest=ae803_5&rmStoreLevelAB=5
https://www.ebay.co.uk/itm/CTSFO004...sh=item4413f7f882:g:bXAAAOSwhChZrEtd#shpCntId
would this work with the HU, just connect upthe 3 wires? and not connect the HU plug connector that goes to my info screen?
regards
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
did you ever get your problem sorted as I now have the same problem
Hi no the seller didnt want to know and just fobbed me off for months before blanking me on whatsapp, no firmware updat as promised, nothing, so what i did was got a set of these:T - 3 Car Intelligent Steering Wheel GPS, hang up/answer, volume setting, music Controller with Noctilucent Function buttons https://www.aliexpress.com/item/Zee...191.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J whicc work quite well, ive also recently ordered a button stalk like how the older radion buttons were: Car steering wheel button remote control lights car navigation DVD / 2 din android Bluetooth wireless Universal remote control,
https://www.aliexpress.com/item/Car...596.html?spm=a2g0s.9042311.0.0.68734c4dUQL81J but im still awaiting delivery of it.
ill be very happy with the stalk as well as the buttons ive stuck to the centre consol, no where near as cool as the steering wheel controls but i really needed my speedo in MPH
anyways hope this helps somewhat not perfect but better than the speedo flashing between KM/MPH
regards
shadowfoxmi said:
I have the same problem, in the US with a BMW 90 android head unit. I think there is a bug in the MCU firmware that reverts back to Metric units on boot. Lucky for me, I am able to change things from Control Settings app but I do have to do it every time the unit boots. I have reported this to the seller of my head unit but they don't have any solutions. I am hoping they will fix it in the near future.
Click to expand...
Click to collapse
I know this is old but I have the same issue with my Joying head unit and my BMW e90. On start up, I have to go into my settings and set everything to American/Imperial units. Did you ever find a fix to this? It's driving me nuts.
Hi! first of, I've tried to search but I couldn't find any answers to my problem.
I have a tesla style headunit for my Toyota land cruiser 120, this unit replace my ac controls. The problem is that it's really buggy, the ac controls work but only half the time, usually the ac buttons are non responsive despite the fan running, and my temp. Adjusting only shows "LOW" and 25.5c. Is it a way to fix this? The seller is not interested in helping me
[IMG="headunit"]https://cdn1.imggmi.com/uploads/2019/8/3/e8693aad4196d3fa7bc4bb0e5416842d-full.jpg/IMG]
Hey, welcome to XDA.
I am going to direct you to this thread https://forum.xda-developers.com/android-auto/android-head-units/tesla-style-headunits-t3512709
There is a lot of info on our units over there. I have the same unit from Phoenix radio in my 07 Lexus GX470. Mine has 1G RAM 32G Rom. It says it is Android 6.0, but that is not true, it's only 4.4.4 I am suffering the same issues as you.
The one thing I have found is that I need to set the Vehicle type as "OLD BADAO WITH DISK HI" I did not find that vehicle type in my firmware, so I am
searching for a solution too. Let me know if you find anything . Good luck, Rick
Hi There,
I've just grabbed a PX6 Android head unit for my Renault Clio 4 2017 from AliExpress and all seems well with exception to the steering controls.
I've tried all the WheelKey/JoyKey/SteeringKey apps and settings on the tablet with no progress, doest even register the keys. My guess is there is a Canbus issue as I can't seem to get any car info on the tablet (car info show no info on engine/battery/doors etc) and the tablet seems to work exactly the same with or without the canbus fitted. The factory settings appear to be all fine but im not sure if there's a good resource out there for correct settings.
Canbus is RN-SS-06 20191206 SW: v1.020004BYPS
Any help would be super appreciated.
Sam
I bought Klyde unit for my 2015 Clio RS about two years ago. Couldn't get steering wheel buttons work. I bought new canbox. No joy. I know other guys that have the same unit and they have it all working.
I hope that someone can find ways to get it done.
Please share if you find resolution.
Sent from my Nokia 7 plus using Tapatalk
good morning ,
I have a problem getting the canbus to work on a junsun android 11 radio with 4g ram and 64g memory. I have Renault Clio 4 from 2017 . I already managed to enter the 8888 from the factory, but I can't add the canbus in my Renault Clio 4 2017, I've already made several settings and nothing and I've also done a reset several times and nothing...can someone help me? thanks
Hi, I have a CC2 Plus radio to Renault Megane 3 .After installing the radio, the outside temperature, i.e. from the canbus, is not displayed.
I wrote to tech support teyes said they disabled this feature and that it will no longer be enabled. Only the one downloaded from the Internet is displayed, not the canbus temperature sensor. Does anyone know in any way it could be displayed on the radio screen
Not MTCD, requested move to [Android Head units].
Op, suggest a read of the forums and a little familiarising before posting.
majorek22 said:
Hi, I have a CC2 Plus radio to Renault Megane 3 .After installing the radio, the outside temperature, i.e. from the canbus, is not displayed.
I wrote to tech support teyes said they disabled this feature and that it will no longer be enabled. Only the one downloaded from the Internet is displayed, not the canbus temperature sensor. Does anyone know in any way it could be displayed on the radio screen
Click to expand...
Click to collapse
was it actually working before
i noticed the same just installed the unit few days ago
did you managed to do something about the joystick near the handbrake or edit the controls on steering wheel ?
Yes, it showed temperature from sensor ( magistral can bus ) but Teyes switch off this. I haven't got joystick but I saw videos on YouTubute and it working with this radio. when it comes to the output on the steering wheel, turn it down, turn it up and set the applications on the button. an image is also displayed when the door is open.
does your original radio was the single color screen one or tomtom navigation type?
Hello, after many month of thinking what to put in my car, I decided not to risk with ones straight from china , even though they have a great design , their prices went quite up. So I bought one from my country which again is Chinese but has 2 years warranty. It has the following specs: Android 11 - octa-core CPU, 4 GB RAM, 64GB ROM, RDS, DSP, CARPLAY . A decent launcher design. After I had it put in my car there are some problems of course...
First of all my dashboard became Chinese , secondly the steering wheel controls don't work. I searched for information and found that I can go in factory settings and change the can bus software or something. I found out I can get in these settings with the password 3368 . And there are many types of CAN BUS settings. Around 5-6 have Opel Insignia . So far I tried 3 and it doesn't work - it doesn't prompt me to reboot but I do it anyway. Also in the navigation "car settings" it just seems like it doesn't talk with the car at all. At least I got to put the Opel logo for boot up animation.
Climate control works from the old knobs , and does not visualize on the screen - this is not really a problem for me but still wonder why doesn't it work. Also i got a OBD II dongle which lights up when i plug it in and the navi Bluetooth finds it , but i cant connect to it - it wants a passcode and 0000,8888,3368 don't work .
Now for what DOES work - the new rearview camera starts when I put it in reverse , but the lines don't bend. Music comes out of the speakers . Blinkers and hazards and chimes have e new bad sounding beep , but at least there is some communication with the car. Sport and Tour buttons work ! The mechanics which put in the new unit took out the whole cd changer , I don't know why and if it was necessary and if it is a problem. Park assist also work and the button but it also has changed chime sounds.
When i contacted the sellers they told me they just sell, and don't know much about installations.. they told me its model is just "8581" not really helpful like the Chinese supports which i expected to avoid.
Any help will be greatly appreciated !! Mainly i want to fix my dashboard to be in English again(when the battery disconnects and the computer resets , it usually goes back in German, never Chinese) And the other thing is to get the steering wheel buttons to work and along with it to have more communication between the car and the navigation unit.
Try reading forums and posting what has been tried, or at least try to figure out what the unit is
https://www.facebook.com/video.php?v=1053379798745114
Log in or sign up to view
See posts, photos and more on Facebook.
www.facebook.com
8581 9 Coll Carplay Android 10 4gb Ram Hd Player Car Accessories Headunit Tv Dvd Player Car Stereo Radio Android 9 Inch - Buy Android 9 Inch,10 In 4gb Stereo 2 Din Car Players 9 Inch Android Stereo Player Android 9 Inche Stereo,Single Din Android 10
8581 9 Coll Carplay Android 10 4gb Ram Hd Player Car Accessories Headunit Tv Dvd Player Car Stereo Radio Android 9 Inch - Buy Android 9 Inch,10 In 4gb Stereo 2 Din Car Players 9 Inch Android Stereo Player Android 9 Inche Stereo,Single Din Android 10 9 Inches Android Car Ips Radio Gps Wifi 128 Gb...
www.alibaba.com
I found those. But it helps me in no way.
The problem was a wrong connection on one of the many cables . Now everything works , and im quite happy with the unit. I dont know in what standby mode it stays but it boots up for seconds, another 5 seconds for the wireless car play and the music starts automatically from Spotify and the maps are ready to navigate. My car leveled up
ivosto said:
The problem was a wrong connection on one of the many cables . Now everything works , and im quite happy with the unit. I dont know in what standby mode it stays but it boots up for seconds, another 5 seconds for the wireless car play and the music starts automatically from Spotify and the maps are ready to navigate. My car leveled up
Click to expand...
Click to collapse
Hi mate hope your well I've currently got the same problems you had with my trip going Chinese and steering wheel not working or the heating on the radio any more information would be great cheers
tommytommy1990 said:
Hi mate hope your well I've currently got the same problems you had with my trip going Chinese and steering wheel not working or the heating on the radio any more information would be great cheers
Click to expand...
Click to collapse
Hi all, I have same problem can anyone help at all. Thanks in advance