Database Users

No Internet connectivity on Android Revolution ROM

Since flashing Android Revolution yesterday I have been unable to connect to the Internet unless I use wifi.
I have a 3gb data allowance and I'm no where near that limit.
There is no G, 3G, or H symbol, just the signal symbol
Sent from my Desire HD using xda premium

Hi,
here some ideas maybe some will help you.
1. Did you check the md5 of the rom?
2. Have you enbled the Mobile data?
3. Did you have set the apn for your provider?
(Menu-Settings-Wireless/Networks-Mobile Data-Accespoints)(Sorry if the names are not 100% right i use German version)
4. Maybe set Network mode on GSM/WCDMA Auto?
5. Maybe some Radio or Kernel Problem?
If nothing helped try posting again in ARHD Thread
Greetings

same problem

Are you using the recommended radio?

This is most likely the problem.
"3. Did you have set the apn for your provider?
(Menu-Settings-Wireless/Networks-Mobile Data-Accespoints)"
Mobile data settings are not stored on "sim" like "sms" settings. You need to manual input them each time you flash. You should find these settings on your providers website on the support page. Once you find them copy/paste/save for future reference. It only takes a few seconds to put them back in.
If you use Titanium Backup these settings are saved in system data backup for future restore, but its recommended only to restore apps+data when flashing a new rom to avoid conflicts.

FurryCup said:
This is most likely the problem.
"3. Did you have set the apn for your provider?
(Menu-Settings-Wireless/Networks-Mobile Data-Accespoints)"
Mobile data settings are not stored on "sim" like "sms" settings. You need to manual input them each time you flash. You should find these settings on your providers website on the support page. Once you find them copy/paste/save for future reference. It only takes a few seconds to put them back in.
If you use Titanium Backup these settings are saved in system data backup for future restore, but its recommended only to restore apps+data when flashing a new rom to avoid conflicts.
Click to expand...
Click to collapse
I agree with FurryCup. APN is responsible for mobile devices to connect to the Internet. To check or set up your APN, you should go to Menu>Settings>Wireless & Networks>Mobile Networks>Access Point Names. You can either add a new APN or edit an existing. Just make sure you have the correct APN settings.

I agree with FurryCup.
Also for future use, you can use APN Backup & Restore / Android Market to save your original APN to your sd card (as an xml file).
Also keep APN Backup & Restore apk on your sd card. (Source)
Every time you flash a new rom - install APN Backup & Restore (from the apk on the sd card), delete the APNs which came with the new rom, restore the original APN which you saved - from your sd card.
Then choose that APN in the phone settings as FurryCup mentions.
Then you can access the correct network as your carrier provides with your phone and contract.
Note: APN Backup & Restore doesn't work with Ice Cream Sandwich.

not sure if its any help to you, BUT... when i installed the rom (my first ever rom) i couldnt manage to install the radio that i was ment to, and everything works fine.
so not sure if the radio you've installed has anything to do with it.

It was the APN, the ROM had automatically set Virgin APN as default when I'm actually on T-Mobile, so I selected the right one and it was working fine.
My phone usually automatically knows my APN details and sets them as default, but it didn't with ARHD for some reason.
Thanks for the replies
Sent from my Desire HD using xda premium

CuBz90 said:
It was the APN, the ROM had automatically set Virgin APN as default when I'm actually on T-Mobile, so I selected the right one and it was working fine.
My phone usually automatically knows my APN details and sets them as default, but it didn't with ARHD for some reason.
Thanks for the replies
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
When you first flash the rom it asks for the carrier to use. Maybe you hit the wrong option?

zelendel said:
When you first flash the rom it asks for the carrier to use. Maybe you hit the wrong option?
Click to expand...
Click to collapse
No I definitely chose T-Mobile. The APN details for both T-Mobile and Virgin were there, but Virgin was selected as default.
Sent from my Desire HD using xda premium

Tried flashing a different kernel?
Carried in by pigeon escort

snowpatrol1702 said:
Tried flashing a different kernel?
Carried in by pigeon escort
Click to expand...
Click to collapse
I got it working a few days ago, the wrong apn settings were selected.
But thanks anyway
Sent from my Desire HD using xda premium

CM10 + 3G connection

Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.

skulljoi said:
Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
Click to expand...
Click to collapse
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me

Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
Worked for me (2)

Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
i has enabled data romaing but national data roaming off, will try with this option enabled now, tks
did you know how the CM10 work with auto enable/disable sync and 3g connection?
on preview version i has an option, turn of sync and 3g after a X mim with no incomming news or something like that

Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?

skulljoi said:
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
Click to expand...
Click to collapse
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?

eduwp90 said:
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
Click to expand...
Click to collapse
i was on 2.3.6 BR and the update to CM10, and the problem began
i am getting other issues like, cant merge PROFILE with my google account and some slowly process

Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
Thanks alot for your hard job, this ROM is AMAZING!
I have signal drop after install this ROM (using version 2012/7/21).
To solve my problem, I copied the File_GSM and File_Seem_Flex_Tables files from my stock ROM (Retail Brazil) and replace the CM9 files.
I put the files in /system/etc/motorola/bp_nvm_default and reboot, and now I have strong signal and no more drop calls.
The ROM CM9 to Motorola Bravo CrystalTalk function is supported. I tried to copy the file Phone.apk this ROM for the Milestone 2 and the option to configure the CrystalTalk appears in the phone settings, but after a reboot the settings are lost.
ATTACHED FILES
bp_nvm_default.zip - [Click for QR Code] (1.2 KB, 29 views)
Click to expand...
Click to collapse
I've tried this procedure in CM10 and it works!!

cruizgaray said:
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
I've tried this procedure in CM10 and it works!!
Click to expand...
Click to collapse
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app

Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470

mike_oldfield said:
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
Click to expand...
Click to collapse
Ok I will try this. I've extracted the files from a gb nandroid backup so I think that this is almost the same but I will give it a try.
I've also used the baseband switching app with no luck.
Anyone knows witch files manage the 3g on our phones¿ I replaced the ones that are listed in the above posts but are there others?
Thank you mates
Sent from my A953 using xda app-developers app

Hi,
I got the same problem for Wifi and in minor way for 3G with mine (my baseband is EPU93_U_00.60.00).
I deactivated the national roaming but reactivated it now for testing ...
For the Wifi I tried to disable 802.11n in the tiwlan.ini file but seems to not work.
I'll try to do the requested log readings from tezet when I would have time.
A message for lotan_rm, you're not the alone one (also need to reach 10 post for posting in dev )

eduwp90 said:
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.

lucasdeeiroz said:
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
Click to expand...
Click to collapse
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??

eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
what country you are?
which SBF (stock froyo) that gives you a good data conection? (full name)

eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...

lucasdeeiroz said:
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
Click to expand...
Click to collapse
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody

eduwp90 said:
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
Click to expand...
Click to collapse
So you have a big problem... Anyway, the files only let the mobile data working for more time, but don't "forever"... Now this problem appears after some hours.

So this problem is not solved at all?
Sent from my A953 using xda app-developers app

eduwp90 said:
So this problem is not solved at all?
Click to expand...
Click to collapse
Before overwriting files my connection was break after few minutes
After overwriting files data connection was extended to few hours
I could not get a continuous data conection in custom ROM

[Guide] Update any Motorola Charm to lates T-Mobile firmware (Working 2G / 3G)

Hey Guys,
The Admins decided to basically add the Charm forums into the Flipout forums, so far only the main forum heading has been changed, hopefully the admins will do the rest of the changes soon.
In the meanwhile, i thought it would be useful to post useful threads on the charm porting, basically since flipout and charm are the same phone with a different design, these should be applicable with respective changes to flipout also.
[Guide] Update any Motorola Charm to lates T-Mobile firmware (Working 2G / 3G)
Author : victory144
Thread : http://forum.xda-developers.com/showthread.php?t=1384837
Content :
victory144 said:
[URL="http://support.t-mobile.com/docs/DOC-1741"]List of improvements, from T-Mobile Documentation.
[/URL]
I AM NOT RESPONSIBLE FOR ANY DAMAGE THAT THIS GUIDE MAY CAUSE. TESTED AND WORKING. FOLLOW AT YOUR OWN RISK!
Warning: Flashing T-Mobile sbf will update the Bootloader, so cant downgrade or flash other sbf.
This guide is for update any Motorola Charm w/o brand to the latest T-Mobile update with fully working 2G/3G network, and get many improvements (Best of all Stability and Battery).
If you have official US T-Mobile Charm you don't need this. as it can be updated normally.
Requirements:
* Any sbf file that currently work (2G/3G) with the corresponding Mobile Providers Link.
* T-Mobile 03.90.7 BLUR firmware sbf file. Link from the Wiki.
* RSD Lite 4.6 Link from the Wiki.
* Moto Android Depacker Link.
* SuperOneClick for Root Internal link.
* Root explorer NO LINK! (Or via ADB).
Click to expand...
Click to collapse
Guide:
A- Backup from the running firmware.
1. Root the phone (any method).
2. Install Root Explorer (alternatively can use ADB or terminal emulator).
3. Backup this folder and save a copy in the computer. "etc\motorola\bp_nvm_default".
Click to expand...
Click to collapse
B- Extract BP from the sbf (That currently work with your 2g/3g network).
1. Open Motorola Android Depacker --> Open From File -->Browse the sbf
2. Click "Split To Folder" this will generate a folder with the same name of the sbf.
3. Remove all split files except this one "CG45.smg" (BP Firmware file).
Click to expand...
Click to collapse
C- Mod T-Mobile sbf.
1. Open Motorola Android Depacker --> Open From File -->Browse the sbf (T-Mobile one).
2. Click "Split To Folder" --> browse to the splitted folder.
3. Replace and overwrite the "CG45.smg" with the one from B.
4. Open Motorola Android Depacker --> "Open File Folder" --> Browse T-Mobile split folder.
5. Click on "Compile File" this will generate "firmware.sbf" with BP that work with the phone.
Click to expand...
Click to collapse
D- Install T-Mobile Mod sbf.
1. Backup any needed phone data.
2. Install and open RSD Lite --> Click on "..." --> Browse to "firmware.sbf"
3. Connect the phone to the computer.
4. Wait until phone show as connected in the RSD Lite--> click "Start".
5. Wait until RSD Lite finish. --> Configure "Moto blur" account.
Optional: It's possible to restore "clockworkmod" backup using polovinamozga's Bootstrapped Recovery.
http://forum.xda-developers.com/showpost.php?p=14796425&postcount=412
Click to expand...
Click to collapse
E- Restore network.
1. Root the phone (using SuperOneClick).
2. Install Root Explorer.
3. Copy this folder from step "A" to the SD Card "bp_nvm_default".
4. open Root Explorer --> Navigate to "sdcard" --> navigate to "bp_nvm_default" folder.
5. "Multi-select" these files:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
Click to expand...
Click to collapse
6. Then press "Copy" --> Navigate to "etc\motorola\bp_nvm_default" --> "Mount RW".
7. Paste --> Overwrite all the files.
8. IMPORTANT Select all copied files (from step E-5) and change permission to rw-r--r--.
9. Reboot phone...Then add the APN of the corresponding network provider.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Credit for all Tools Creator.
Sorry about any grammatical/spell English error.
Click to expand...
Click to collapse
Credits to the respective author and aforementioned credits.

Thanks for the clear guide. Had a lot of difficulty with this back a year or two ago when I first got my Charm.
Does anyone know if the T-Mo (1700/2100) and 850/1900/2100 Charms have any hardware differences? Or is the 3G bands support purely in software?
I'm actually wondering if it's possible to do the opposite of this guide. That is, flash my existing deblur SBF, but with the T-Mobile BP files, to convert my Telus Charm into one that works on T-Mobile/Wind/Mobilicity.

ergosteur said:
Thanks for the clear guide. Had a lot of difficulty with this back a year or two ago when I first got my Charm.
Does anyone know if the T-Mo (1700/2100) and 850/1900/2100 Charms have any hardware differences? Or is the 3G bands support purely in software?
I'm actually wondering if it's possible to do the opposite of this guide. That is, flash my existing deblur SBF, but with the T-Mobile BP files, to convert my Telus Charm into one that works on T-Mobile/Wind/Mobilicity.
Click to expand...
Click to collapse
yes you can but you will have to download telus sbf and T-mobile sbf, then replace firmware of t-mo sbf with that of the telus then copy bp files from telus to t mo, its given in the guide.
but after flashing t-mo ROM you can flash any other sbf other than. t mo as the bootloader gets updated.
but you could try the reverse to obtain a telus ROm working on T mo. Don't have either of these, so can't test it out also.

Cool, thanks. Will try it and report back.
Sent from my Galaxy Nexus using xda premium

Link to the sbf file is dead.

So this is supposed to enable 3g internet connection as well?.. i did everything and managed to use 2g and 3g to calls and sms.. but i cant see the internet connection option..

eetu1923 said:
So this is supposed to enable 3g internet connection as well?.. i did everything and managed to use 2g and 3g to calls and sms.. but i cant see the internet connection option..
Click to expand...
Click to collapse
You'll need to update the apn settings for your carrier. Look around on the forums or search web, there are instructions. Your carrier's website could be helpful too, for example Bell Mobility (Canada): http://support.bell.ca/Mobility/Sma..._Nexus_One_for_the_Bell_Mobility_HSPA_network

ergosteur said:
You'll need to update the apn settings for your carrier. Look around on the forums or search web, there are instructions. Your carrier's website could be helpful too, for example Bell Mobility (Canada): http://support.bell.ca/Mobility/Sma..._Nexus_One_for_the_Bell_Mobility_HSPA_network
Click to expand...
Click to collapse
Well my Carrier is Telcel in Mexico, but i have already created the APN settings for it.. but thers no option to turn on the data services... in some other forum they told me that the baseband frecuencies arent compatible and the only way of getting my 3g data back is to restore the device to the original LATAM firmware.. which i guess im not able to do since i cant go back from the TMOBILE bootloader..
PLease tell me im wrong and that there is a way of doing this..
Im gbuessing maybe sending it to motorola and they could do some magic?...

eetu1923 said:
Well my Carrier is Telcel in Mexico, but i have already created the APN settings for it.. but thers no option to turn on the data services... in some other forum they told me that the baseband frecuencies arent compatible and the only way of getting my 3g data back is to restore the device to the original LATAM firmware.. which i guess im not able to do since i cant go back from the TMOBILE bootloader..
PLease tell me im wrong and that there is a way of doing this..
Im gbuessing maybe sending it to motorola and they could do some magic?...
Click to expand...
Click to collapse
Hmm, weird, so you copied the bp_nvm_default files as above, and your 3G is working for calls but not for data?
Maybe try re-flashing the ROM?
I have a Charm that was originally on Telus (Canada), they use the same frequencies as Telcel (850/1900) for HSPA. Flashed the T-Mobile sbf and lost 3G, but replacing the bp_nvm_default files made the 3G work with Telus again. Took a couple of tries though - it's a bit finicky. Had to re-flash T-Mobile ROM a couple of times before the mod worked.

ergosteur said:
Hmm, weird, so you copied the bp_nvm_default files as above, and your 3G is working for calls but not for data?
Maybe try re-flashing the ROM?
I have a Charm that was originally on Telus (Canada), they use the same frequencies as Telcel (850/1900) for HSPA. Flashed the T-Mobile sbf and lost 3G, but replacing the bp_nvm_default files made the 3G work with Telus again. Took a couple of tries though - it's a bit finicky. Had to re-flash T-Mobile ROM a couple of times before the mod worked.
Click to expand...
Click to collapse
You are giving me hope here hehe ..
Well i did replaced the bp_nvm_default files...
You see after the flash of the Tmobile rom i had to do that in order for the phone to recognize the Telcel network.. so after i replaced the bp_nvm_default files, it worked and i can make calls.. and access 2g and 3g networks..
Then i went to wireless settings and added the APN info for telcel.. MMS, GPRS, and 3G... Everything ok there or so it seems..
Then i went to Data Delivery Settings.. but there is no option to turn off the Data services for 3g or 2g for that matter...
I have seen this in some other T Mobile roms (in a droid 2)....
Any clues..?? do you have a way to enable 3g data in your settings?...

eetu1923 said:
You are giving me hope here hehe ..
Well i did replaced the bp_nvm_default files...
You see after the flash of the Tmobile rom i had to do that in order for the phone to recognize the Telcel network.. so after i replaced the bp_nvm_default files, it worked and i can make calls.. and access 2g and 3g networks..
Then i went to wireless settings and added the APN info for telcel.. MMS, GPRS, and 3G... Everything ok there or so it seems..
Then i went to Data Delivery Settings.. but there is no option to turn off the Data services for 3g or 2g for that matter...
I have seen this in some other T Mobile roms (in a droid 2)....
Any clues..?? do you have a way to enable 3g data in your settings?...
Click to expand...
Click to collapse
Gave my Charm to my brother. I can probably check with him tomorrow and report back.

ergosteur said:
Gave my Charm to my brother. I can probably check with him tomorrow and report back.
Click to expand...
Click to collapse
Please doo

Hey guys, I got stuck on T-Mo firmware T-Mobile_MB502_02.60.5_1FF_01, trying to unlock my phone but the band of my operator is for 850-1900, so no phone calls.
I followed this tutorial and it looks that it worked but after RSD finishes and restart the phone, I'm geting the message "SIM network unlock phone" does this means that:
--- it is recognizing the band of my operator (Claro - Colombia) but I need to use one of the services that offers the unlock code like "unlockallcellular.com"?--- that was the point of doing the flash anyways...
or
--- for step "E- Restore network" I need the files from the - "bp_nvm_default" - folder from a actual working Charm on my network? I'm using the ones given on http://forum.xda-developers.com/showthread.php?t=903969&page=4 (TELUS) is there any unlocked ones?
or
--- Am I doing anything wrong? :crying::crying::crying::crying: I've done the procedure like 10 times...
Thanks in advance for any help!!!

[Q] no internet on jelly bean rom??

Was able to install android version (NexusHD2-JellyBean-CM10.1 V2.2) via the nand method on my US htc hd2 on t-mobile which im new too. it runs great calls, texts etc however it says i have no internet connection it shows bars but with no 3g symbol or anything and when i try to use navigation or maps it says i have no internet connection. is this a problem with this rom or did i do something wrong?? please help everything else is great!! noob here as far as using this technique

Have you set up an APN?
Settings > Network > Access Point Names > *click menu* > New APN > *configure* > save > select the newly created APN

Marvlesz said:
Have you set up an APN?
Settings > Network > Access Point Names > *click menu* > New APN > *configure* > save > select the newly created APN
Click to expand...
Click to collapse
there are already apns set up already and the tmobile one is selected ??

xxfirerican said:
there are already apns set up already and the tmobile one is selected ??
Click to expand...
Click to collapse
they show one for simple, one for straight talk, tmobile us and tmobile us lte can someone please help i really need the data on my phone for gps and internet as my job requires me to have it enabled on my cell phone .

I don't know, if an APN is properly configured and selected, data should work UNLESS you're on cLK but have RMNET, your sim card is misplaced (is that even possible?), or you haven't enabled "data" in mobile network settings.

Marvlesz said:
I don't know, if an APN is properly configured and selected, data should work UNLESS you're on cLK but have RMNET, your sim card is misplaced (is that even possible?), or you haven't enabled "data" in mobile network settings.
Click to expand...
Click to collapse
do i enable the roaming as well does that work?

Was able to install android version (NexusHD2-JellyBean-CM10.1 V2.2) via the nand method on my US htc hd2 on t-mobile which im new too. it runs great calls, texts etc however it says i have no internet connection it shows bars but with no 3g symbol or anything and when i try to use navigation or maps it says i have no internet connection. is this a problem with this rom or did i do something wrong?? please help everything else is great!! noob here as far as using this technique
Click to expand...
Click to collapse
Are you using magldr or clk?
If magldr reinstall ROM (just clear dalvic cache and cache before, no need to clear data) and choose ppp instead of rmnet when asked.
Edit: do not reboot system, go back to recovery, reboot into recovery and fix permissions then reboot system..
Sent from my NexusHD2 using xda premium

I had a similar problem when installing NexusHD2-JellyBean-CM10. If I installed with factory reset or wipe cache, it would not work. If I re-flash over the top of it without wiping cache, it would work. Worth a try.

cosmosmoss said:
I had a similar problem when installing NexusHD2-JellyBean-CM10. If I installed with factory reset or wipe cache, it would not work. If I re-flash over the top of it without wiping cache, it would work. Worth a try.
Click to expand...
Click to collapse
its on ppl and still no internet i can send and receive messages though ??

xxfirerican said:
its on ppl and still no internet i can send and receive messages though ??
Click to expand...
Click to collapse
Did you do this:
shanman-2 said:
Are you using magldr or clk?
If magldr reinstall ROM (just clear dalvic cache and cache before, no need to clear data) and choose ppp instead of rmnet when asked.
Edit: do not reboot system, go back to recovery, reboot into recovery and fix permissions then reboot system..
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
??

SOLVED - No Mobile Network after abroad prepaid-SIM was inside.

Hello
Since my english is too bad, I let Google translate the text ...
Was in the Netherlands on vacation and in the host country a prepaid SIM used, which worked problem-free. Back home (Switzerland) no MobileNetwork connection is possible any more. APN was controlled with the provider (Swisscom) and seems to be correct. Receiving the configuration SMS failed, but "normal" SMS can be received and sent. Voice and WLAN works fine.
Deleting DATA, DALVIK and CACHE via TWRP did not help. Also did not help remove the battery. No system update or the like has been made in the meantime.
Does anyone have an idea, which I can still make?
System:
SM-N9005
CyanogenMod 13 by Temasek
Mod version 13.0-20161220-UNOFFICIAL-trader418-hlte
Android 6.0.1
Baseband N9005XXUGBP1
Thanks for support

APN.

Jogi_CH said:
Hello
Since my english is too bad, I let Google translate the text ...
Was in the Netherlands on vacation and in the host country a prepaid SIM used, which worked problem-free. Back home (Switzerland) no MobileNetwork connection is possible any more. APN was controlled with the provider (Swisscom) and seems to be correct. Receiving the configuration SMS failed, but "normal" SMS can be received and sent. Voice and WLAN works fine.
Deleting DATA, DALVIK and CACHE via TWRP did not help. Also did not help remove the battery. No system update or the like has been made in the meantime.
Does anyone have an idea, which I can still make?
System:
SM-N9005
CyanogenMod 13 by Temasek
Mod version 13.0-20161220-UNOFFICIAL-trader418-hlte
Android 6.0.1
Baseband N9005XXUGBP1
Thanks for support
Click to expand...
Click to collapse
I would delete APN settings and look them up in Google, input them manually.

ShaDisNX255 said:
I would delete APN settings and look them up in Google, input them manually.
Click to expand...
Click to collapse
Thanks for the tip, but I have already done. Have the APN-Settings deleted and newly created, nevertheless it does not work anymore.
Have also the file under /etc/apns-conf.xml.txt deleted and replaced by other version. Still does not work.
Is there a way to debug the error?

Jogi_CH said:
Thanks for the tip, but I have already done. Have the APN-Settings deleted and newly created, nevertheless it does not work anymore.
Have also the file under /etc/apns-conf.xml.txt deleted and replaced by other version. Still does not work.
Is there a way to debug the error?
Click to expand...
Click to collapse
You mean "apns-conf.xml"
Try to dirty flash your rom.

zlazaar said:
You mean "apns-conf.xml"
Try to dirty flash your rom.
Click to expand...
Click to collapse
Yes exactly, the apns-conf.xml I have deleted. Where are the manually entered parameters stored?
Unfortunately I have the original files of my ROM no longer, I would have to look first here again. Do you mean "dirty flash", the ROM over the already existing system flashen?
If I still knew how, I would only flash the modem again. The system works sunnily.
It is also funny that the SMS-APN configuration can not receive from the provider, but all other SMS arrive.

Jogi_CH said:
Yes exactly, the apns-conf.xml I have deleted. Where are the manually entered parameters stored?
Unfortunately I have the original files of my ROM no longer, I would have to look first here again. Do you mean "dirty flash", the ROM over the already existing system flashen?
If I still knew how, I would only flash the modem again. The system works sunnily.
It is also funny that the SMS-APN configuration can not receive from the provider, but all other SMS arrive.
Click to expand...
Click to collapse
User apn is stored in "/data/data/com.android.settings/shared_prefs/com.android.settings_preferences.xml"
Yes, i mean flash again the same rom over the existing one.
And sms don't need apn to work, only data and mms do.

zlazaar said:
Yes, i mean flash again the same rom over the existing one.
Click to expand...
Click to collapse
"Dirty flash" unfortunately did not help.
Search now a suitable modem and the guide to update only the modem.

Jogi_CH said:
"Dirty flash" unfortunately did not help.
Search now a suitable modem and the guide to update only the modem.
Click to expand...
Click to collapse
Unfortunately, the update or even change from the modem did not help.
Property therefore a complete new installation of a stock ROM. Then again TWRP and CM13, now everything works as before.
Thanks anyway

My solution for those with the same problem:
After deleting all the files didn't solve the problem, the following trick helped:
Plugged in an old, no longer working SIM from an Italian provider and waited for the message from the network operator, "SIM invalid". Then I plugged in my SIM and everything works again...