Database Users

don't manually upgrade to 2.3.4

there seems to be at least 3 users who can't connect to a network after manually upgrading judging from this thread:
http://forum.xda-developers.com/showthread.php?p=13417499
it may be best to wait for an ota upgrade. (and let's not fill with this thread with "it works for me" please.)
i'm currently owner of a phone that can't phone.

MarkusPO said:
there seems to be at least 3 users who can't connect to a network after manually upgrading judging from this thread:
http://forum.xda-developers.com/showthread.php?p=13417499
it may be best to wait for an ota upgrade. (and let's not fill with this thread with "it works for me" please.)
i'm currently owner of a phone that can't phone.
Click to expand...
Click to collapse
I'll update my ota thread
Sent from my Nexus S

I hope google can quickly send all the ota. There should be some people try every efforts by downgrade then upgrade or going thru any path to get the 2.3.4, may finally mess up the phone ...

it seems impossible to downgrade.
google, you broke my phone.

Do you have the correct build number?

Try flash an older ROM first, then flash a known working radio for your phone. Hope that gets your phone working again.

under the battery, it's a gt-i9020
the ssn is i9020gsmh

Manually flashed my Nexus S and now im having poor reception/disconnects on 3G data. Also my GPS didnt improve. Im not rooted and have stock android.
Did I do something wrong while upgrading to 2.3.4? Can i revert to 2.3.3?

I did the manual update for 2.3.3 and 2.3.4 nothing went wrong

i manually done mine and have no such problem.

let's stop with the "i did it, and i'm ok" posts, which if you read in op, you'll see i wrote the same.

i too unable to connect to network. APN still there but i can't connect to network. But i still able to downgrade to previous version. if unable to, try restore from the latest nandroid backup? i manage to restore to my CM7.0.2. im gonna wait for a bit longer~~~

did any of you try to use your SIM in a other phone? did it work?
did any of you requested support of your carrier ?
and did any one delete their APN's(yes all of them,total reset.factory ect ect)
and tryd to retype the apn settings manually??
DID any one of you guys notice you have to set the IPV4 and IPV6 options in APN Editor????
or did any one RESET your sim?(yes you can,there are codes for that.ask your carrier)
if i want to connect to my carrier's APN i have to fide a bit with the setting and leave things out.
like BEN.NL( T-mo) says APN type needs to be: internet.
if i type internet in the APN type.
my network(3G ect) wont work.
i i leave APN type empty.
all works fine.

ghost010 said:
did any of you try to use your SIM in a other phone? did it work?
did any of you requested support of your carrier ?
and did any one delete their APN's(yes all of them,total reset.factory ect ect)
and tryd to retype the apn settings manually??
DID any one of you guys notice you have to set the IPV4 and IPV6 options in APN Editor????
or did any one RESET your sim?(yes you can,there are codes for that.ask your carrier)
if i want to connect to my carrier's APN i have to fide a bit with the setting and leave things out.
like BEN.NL( T-mo) says APN type needs to be: internet.
if i type internet in the APN type.
my network(3G ect) wont work.
i i leave APN type empty.
all works fine.
Click to expand...
Click to collapse
my phone is working, just the 3G reception is very poor and dropping constantly
- didnt try the SIM at any other phones
- didnt request support yet (carriers in Brazil suck, they dont even know the APN settings)
- tried deleting and adding APN now, not enough time to test it yet
i had IP4 in APN

ghost010 said:
did any of you try to use your SIM in a other phone? did it work?
did any of you requested support of your carrier ?
and did any one delete their APN's(yes all of them,total reset.factory ect ect)
and tryd to retype the apn settings manually??
DID any one of you guys notice you have to set the IPV4 and IPV6 options in APN Editor????
or did any one RESET your sim?(yes you can,there are codes for that.ask your carrier)
if i want to connect to my carrier's APN i have to fide a bit with the setting and leave things out.
like BEN.NL( T-mo) says APN type needs to be: internet.
if i type internet in the APN type.
my network(3G ect) wont work.
i i leave APN type empty.
all works fine.
Click to expand...
Click to collapse
i didn't try other simcard because i only have 1. but i do check my APN setting, and it's all the same as previously. i don't know what went wrong, but i will stick to my cm7.0.2.. until next version of cm support 2.3.4. i can't live without CM goodies

everything fine here on 2.3.4 manual update..
i just need to root now.

MarkusPO said:
under the battery, it's a gt-i9020
the ssn is i9020gsmh
Click to expand...
Click to collapse
not really what i meant.
read the sticky.
http://forum.xda-developers.com/showthread.php?t=1056062
There have only been certain variants of 2.3.4 released. If you flashed the wrong one, could be your problem and anyone else that decided to cowboy the upgrade

I am GRI54 I can't wait no longer 3.4.5. Where is OTA!!
Sent from my Nexus S using XDA Premium App

MarkusPO said:
"it works for me"
Click to expand...
Click to collapse
Could be something else bro because it works for me.

If you had kb3 radio you needed to downgrade to kb1 first
Sent from my Nexus S using XDA App

unlocked and upgraded to 4.5.91 NO DATA :(

Hello guys,
I have a sim unlocked, bootloader unlocked, 4.5.91 gingerbread, AT&T atrix 4g on Fido network in Canada.
I made the apns using the same apns from when i was using .81 but I can not seem to connect via 3g/2g/gprs. The only way to use the internet is via WIFI.
What do you think is the problem?

try a reboot...

I'v rebooted at least 10 times now

did you make a backup?
You can go into your Mobile Settings and do a 'reset to defaults'.. otherwise, if you made a backup of you system file, you can copy 'apns-config.xml' from /System/etc to the same directory on you phone...
I had the same issue, I just did the 'reset to defaults' and got my apns back.. but going to copy my previous apns-config.xml file cus that had custom apns..
hope that helps..

I alread have tried reseting to default and adding the APN's again.
as far as system back ups, I dont have one

You can find the apn settings online, i would create a new apn and put those settings you find in. I had issues with mine, and when I did that, it fixed my problems. I put a link below that has the apn settings.
androidforums.com/htc-inspire-4g/276917-inspire-4g-apn-settings.html
Edit: sorry, I didn't realize you weren't using att...but same idea, just manually set up your apn network

Also, you could have the wrong mobile radio installed. I know that they are set to pick up certain frequencies and that radio might not work on fido.
Sent from my MB860 using XDA Premium App

HungryEel said:
I alread have tried reseting to default and adding the APN's again.
as far as system back ups, I dont have one
Click to expand...
Click to collapse
Hmm.. that is weird, maybe you can pull the apns-config.xml from one of the Bell ROMS or from one of the P-ROMs floating around in Dev section to replace what you have now for APNs... just adb it to /System/etc/ , then reboot and go back into your APN settings to see if doing another reset to defaults will work if they don't show up after the reboot..

DarylT said:
Also, you could have the wrong mobile radio installed. I know that they are set to pick up certain frequencies and that radio might not work on fido.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
How do I check what radio version I have installed?
as far as icons are concerned, I get H+ icon

Go to about phone in settings and its under baseband version. I had a similar but not same problem, which was solved by resetting the apns as that seemed not to work in your case. I would try to flash a new radio.
Sent from my MB860 using XDA App

N_01.77.30P is my baseband.
How do i flash a new radio? sorry for being such a noob

Ah.
Here is a new radio:
http://briefmobile.com/download-android-2-3-4-gingerbread-for-motorola-atrix-4g
Its at the bottom and for you I would use the .sbf, i have no clue whether this will work with your carrier... If you would prefer a .zip to flash with CWM I can give you one

HungryEel said:
N_01.77.30P is my baseband.
How do i flash a new radio? sorry for being such a noob
Click to expand...
Click to collapse
I have the same problems after 2 day of 4.5.91 update I loss the complete data conection, any apn that I usualy use work, I dont have any idea to solver the problems, work only for wifi, I use a diferent radios and is not solver the problem. I have a atrix AT&T root + bl unlock + 4.5.91 + 30p radio.

Here's a CWM zip file of ton of APNs. Just install and go to your APN list and reset to default. If it's an APN issue. As far as radio, not sure which you need for your area. http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1189497&v=1&libid=1313370618834&out=http%3A%2F%2Fwww.multiupload.com%2FXW7FT9N3Z4&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D997&title=%5BROM%5D%20CHERRY%CF%80%20%26%20%CF%80CRUST%20v0.7%20%5BAT%26T%5D%20%5BINTL%5D%20%5BGB%5D%20%5BD3%20Camera%20w%2F%201080p%5D%20-%20xda-developers&txt=%3CFONT%20size%3D5%3ELarger%20APN%20List%20from%20v0.3%3C%2FFONT%3E&jsonp=vglnk_jsonp_13133705901661

Is not a APN problem, i dont know why but i loss the data connection after upgrade and BL unlock...
if anybody has a solution, please, post it.
Thx

You can get the bell radio from this thread (fruitcakes)
http://forum.xda-developers.com/showthread.php?t=1163009
Make sure that you are using the correct kernel for your phone.
Lastly, these are the fido APN settings I use; they work as a single APN.
name
Fido Internet
apn
internet.fido.ca
proxy
not set
port
not set
username
fido
password
fido
server
not set
mmsc
http://mms.fido.ca
mms proxy
205.151.011.013
mms port
not set
mcc
302
mnc
370
authentication type
not set
apn type
not set
Just a (possibly) stupid question, but after you reset to default and input your apn settings, are you clicking on it so that it is highlighted in green?
If all of that doesn't work, I would try re-flashing whichever rom you are using through CWM recovery and see what happens.

Epic 4g on Cricket

I am starting this because there is not a lot of support for the Cricket Epics..
So I will start one with all the things I have learned from having to do this all myself.. I am aware there is some major differences when dealing with a flashed phone. So we as Cricket users no what to do. Thanks I hope everyone enjoys.

First post mms.
This is all from n8dogg4life and I take no creidet at all for it!
Just like all the other threads, I am not responsible for what you do with your phone, USE AT YOUR OWN RISK
So after not having MMS for around 7 months, I am now able to send and recieve MMS thanks to some help from jpond83 over at cricketusers.com where he/she uploaded a CWM backup of his setup. Here is the link http://www.cricketusers.com/sprint-s...#axzz1dtgugG00
And his post is #88.
As soon as I restored his backup, I tested MMS and everything worked flawlessly. I on the other hand like the CleanGB rom by toadlife so I extracted some files from jpond83's "Cricket rom" and implemented it into my CleanGB setup and it still works great. So lets get started.
Please note I have tested this on my Epic 4g twice going through these steps exactly and it has work both times, I am using CleanGB rom so experience may differ with other roms/Android versions. Let me know if this works for you.
UPDATE: I have recently found out the Pictures are sent just fine, Sounds on the other hand are causing this fix to break completely even if you redo the steps, you must restore your backup and perform them again.
Prerequisites:
Make a backup within CWM just in case
An Epic 4g with root and your choice of GB EI22
A way to access system files ie. Root Explorer
APN Backup & Restore from the Android Market
Download the attached ZIP onto SDcard (Contains required files)
Step 1) Open APN Backup & Restore and create a backup of your APN setup.
Step 2) Copy cricketapns-20111115203127.xml from the download folder into the ApnBackupRestore folder on your SDcard. APN Backup & Restore should create this folder.
Step 3) Open APN Backup & Restore and restore cricketapns-20111115203127.xml
The following 3 steps were performed in Root Explorer.
Step 4) Next, rename three files by adding ".XXX" without quotes to the end of each file located in this directory.
/data/data/com.android.providers.telephony/databases/
These are the files you are looking for.
cdmatelephony.db
mmssms.db
telephony.db
Step 5) In the downloaded folder, there are 3 files with the same names, copy these files to the same directory since we are replacing them but keeping the old ones just in case.
Step 4) Rename Mms.apk to Mms.apk.XXX located in the following directory.
/system/app/
Step 6) Copy over the Mms.apk from the download into the same directory.
/system/app/
Step 7) Install autostart.apk
Step 8) Reboot your Epic 4g and enjoy (hopefully) sending MMS’s.
I want to thank jpond83 again for his upload and toadlife for the rom. Dont forget to click thanks

Second post Youtube.
I heve had some issues with the Youtube playback over network.
It will work fine over WiFi but not at all over Network, So after lots of frustrating attempts I figured this out..
1 On the phone dial ##3282##
2 Pick "Edit"... It will ask for your msl lock code. Pick "Others" and then "Multimedia"
3 RTSP Proxy Address needs to be 0.0.0.0
4 RTSP Proxy Port needs to be 0
5 HTTPPD Proxy Address needs to be 0.0.0.0
6 HTTPPD Proxy Prot need to be 0
Restart the phone and all is good and working right..
if you are on 2.3.3 (gingerbread)
try 254.254.254.254
0
254.254.254.254
0
you are good to go. or should be

The only things needed to change a rom to cricket is the proper prl
the mms.apk file that i created
phone programmed via QPST
the correct apn settings
the multimedia settings
You can flash any gingerbread rom and use the mms.apk i supplied you just need to make sure the apn settings are correct.
---------- Post added at 05:55 PM ---------- Previous post was at 05:50 PM ----------
Also does anyone know if cricket stopped using a proxy because i get full 3g without messing with proxy settings

i get full 3g and mms
Sent from my SPH-D700 using XDA App

jpond83 said:
does anyone know if cricket stopped using a proxy because i get full 3g without messing with proxy settings
Click to expand...
Click to collapse
There is no proxy needed on the $55 android plan, but as far as I know it is still required for all the other plans

jpond83 said:
The only things needed to change a rom to cricket is the proper prl
the mms.apk file that i created
phone programmed via QPST
the correct apn settings
the multimedia settings
You can flash any gingerbread rom and use the mms.apk i supplied you just need to make sure the apn settings are correct.
---------- Post added at 05:55 PM ---------- Previous post was at 05:50 PM ----------
Also does anyone know if cricket stopped using a proxy because i get full 3g without messing with proxy settings
Click to expand...
Click to collapse
Which PRL are you using? Also does sending audio clips work for you?

n8dogg4life said:
Which PRL are you using? Also does sending audio clips work for you?
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
i will look as soon as i get home. i have not tryed to send audio but can send video

ran into an problem with urban persision (copkids new rom). really nice rom but unable to use ##3282## to edit data setting. i am looking for a fix and will let you no what i find out..
Sent from my SPH-D700 using XDA App

n8dogg4life said:
Which PRL are you using? Also does sending audio clips work for you?
Click to expand...
Click to collapse
I am using PRL 35513

i have been running into some of the roms that wont allow changing of the proxy settings, witch you need to do for youtube to work..
Sent from my SPH-D700 using XDA App

shaunfrazier said:
i have been running into some of the roms that wont allow changing of the proxy settings, witch you need to do for youtube to work..
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
use anycut to make a shortcut to settings

[Q] no internet on jelly bean rom??

Was able to install android version (NexusHD2-JellyBean-CM10.1 V2.2) via the nand method on my US htc hd2 on t-mobile which im new too. it runs great calls, texts etc however it says i have no internet connection it shows bars but with no 3g symbol or anything and when i try to use navigation or maps it says i have no internet connection. is this a problem with this rom or did i do something wrong?? please help everything else is great!! noob here as far as using this technique

Have you set up an APN?
Settings > Network > Access Point Names > *click menu* > New APN > *configure* > save > select the newly created APN

Marvlesz said:
Have you set up an APN?
Settings > Network > Access Point Names > *click menu* > New APN > *configure* > save > select the newly created APN
Click to expand...
Click to collapse
there are already apns set up already and the tmobile one is selected ??

xxfirerican said:
there are already apns set up already and the tmobile one is selected ??
Click to expand...
Click to collapse
they show one for simple, one for straight talk, tmobile us and tmobile us lte can someone please help i really need the data on my phone for gps and internet as my job requires me to have it enabled on my cell phone .

I don't know, if an APN is properly configured and selected, data should work UNLESS you're on cLK but have RMNET, your sim card is misplaced (is that even possible?), or you haven't enabled "data" in mobile network settings.

Marvlesz said:
I don't know, if an APN is properly configured and selected, data should work UNLESS you're on cLK but have RMNET, your sim card is misplaced (is that even possible?), or you haven't enabled "data" in mobile network settings.
Click to expand...
Click to collapse
do i enable the roaming as well does that work?

Was able to install android version (NexusHD2-JellyBean-CM10.1 V2.2) via the nand method on my US htc hd2 on t-mobile which im new too. it runs great calls, texts etc however it says i have no internet connection it shows bars but with no 3g symbol or anything and when i try to use navigation or maps it says i have no internet connection. is this a problem with this rom or did i do something wrong?? please help everything else is great!! noob here as far as using this technique
Click to expand...
Click to collapse
Are you using magldr or clk?
If magldr reinstall ROM (just clear dalvic cache and cache before, no need to clear data) and choose ppp instead of rmnet when asked.
Edit: do not reboot system, go back to recovery, reboot into recovery and fix permissions then reboot system..
Sent from my NexusHD2 using xda premium

I had a similar problem when installing NexusHD2-JellyBean-CM10. If I installed with factory reset or wipe cache, it would not work. If I re-flash over the top of it without wiping cache, it would work. Worth a try.

cosmosmoss said:
I had a similar problem when installing NexusHD2-JellyBean-CM10. If I installed with factory reset or wipe cache, it would not work. If I re-flash over the top of it without wiping cache, it would work. Worth a try.
Click to expand...
Click to collapse
its on ppl and still no internet i can send and receive messages though ??

xxfirerican said:
its on ppl and still no internet i can send and receive messages though ??
Click to expand...
Click to collapse
Did you do this:
shanman-2 said:
Are you using magldr or clk?
If magldr reinstall ROM (just clear dalvic cache and cache before, no need to clear data) and choose ppp instead of rmnet when asked.
Edit: do not reboot system, go back to recovery, reboot into recovery and fix permissions then reboot system..
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
??

Xfinity Mobile Data Not Working

Hi,
Is anyone else having a problem with Xfinity Mobile data? I can make phone calls, but I can't get any data connection. This was a phone I bought from Sprint, and due to their messed up unlock system, it got relocked, so I manually unlocked it by using this method: https://forum.xda-developers.com/showpost.php?p=75994498&postcount=360
After that, the phone got unlocked successfully. It accepted a TMO sim, and I was able to update to newer firmware. Today, I decided to put it on my Xfinity Mobile line, and I just can't make data work. Any help would be appreciated.
Thank you,

OK. I think I narrowed down the problem. APN setting has VZWINTERNET. It's supposed to be COMCAST.RSLR.VZWENTP based on what I read on the internet. The problem is, I can't edit or add a new APN. I saw someone else talking about this APN setting problem, and his was resolved with the April security patch https://forums.androidcentral.com/e...cant-add-edit-apn-all-sudden-lost-4g-lte.html
I have that security patch already installed, but my problem persists. I can't change APN. Any help would be appreciated.

It's possible Xfinity locks the APN settings or that it has something to do with yours being the Sprint version. I would power the phone down and remove the SIM. Power the phone on with no SIM card and when you are booted up go into settings and reset the network settings. Power down again and insert your Xfinity SIM. That should ensure that the new SIM populates all the network settings.

jhs39 said:
It's possible Xfinity locks the APN settings or that it has something to do with yours being the Sprint version. I would power the phone down and remove the SIM. Power the phone on with no SIM card and when you are booted up go into settings and reset the network settings. Power down again and insert your Xfinity SIM. That should ensure that the new SIM populates all the network settings.
Click to expand...
Click to collapse
Thank you for replying. That did not work. I don't think it's Xfinity. The problem is that APN gets locked to VZW instead of Xfinity's APN, which is why data doesn't work. I can put a TMO sim card in it and it works fine, so I don't know that there is something wrong with the phone itself. If you have any other suggestions, I would appreciate it. I'm desperate to get this working.

goldentequila said:
Thank you for replying. That did not work. I don't think it's Xfinity. The problem is that APN gets locked to VZW instead of Xfinity's APN, which is why data doesn't work. I can put a TMO sim card in it and it works fine, so I don't know that there is something wrong with the phone itself. If you have any other suggestions, I would appreciate it. I'm desperate to get this working.
Click to expand...
Click to collapse
In a Reddit thread, a user says you need to disable Enhanced LTE:
Under Settings > More > Cellular Networks, disable "Enhanced 4G LTE Mode" and set "System select" to "Automatic"
Haven't tried it myself, but I'm thinking of switching to XM and would like to know how this works out for you.

Get your original Xfinity phone factory reset the original Xfinity phone put your Sim in go through activation. This should work for you this also fixes volte on Xfinity If your volte ever gets deactivated. Anyway from what has happened to my other phones sometimes the apn can get changed on the Sim and got carried over somehow. Resetting the original Xfinity phone will bring the Sim settings back to the Sim card thus fixing your apn settings.
(Another way is to use another phone to edit the apn settings)
I also have Xfinity mobile and it's working fine. Just sometimes my apn gets uncheck and I don't know why
If you messed with bands.
Also make sure you go and download hidden settings from the playstore if you messed with your bands and selected American bands you need to select automatic bands if you messed with radio information page settings.
I messed with bands and it caused phone calls to not work.
---------- Post added at 10:08 AM ---------- Previous post was at 09:31 AM ----------
The Sim saves apn settings and I did notice the first time using this essential phone I had 2 options in the apn and I read carefully which one to select. It may have saved the incorrect information to the Sim. I did this once on a Moto phone and I thought if I put Verizon apns instead of Comcasts I could get better speeds. But I caused my data to stop working. I reset the Moto phone and u still had the problems. I looked for the apn for Comcast couldn't find it. Then I thought of either editing the apn using another phone or using the original Xfinity phone. But it does get saved for sure. I ran into this issue before and I'm pretty sure this will resolve the problems.

goldentequila said:
Thank you for replying. That did not work. I don't think it's Xfinity. The problem is that APN gets locked to VZW instead of Xfinity's APN, which is why data doesn't work. I can put a TMO sim card in it and it works fine, so I don't know that there is something wrong with the phone itself. If you have any other suggestions, I would appreciate it. I'm desperate to get this working.
Click to expand...
Click to collapse
Ever get this resolved?

rootnooby said:
Ever get this resolved?
Click to expand...
Click to collapse
Yes. I manually sideloaded Beta Oreo build, even though my phone already had the official OTA Oreo on it. That fixed the connection issue altogether.

goldentequila said:
Yes. I manually sideloaded Beta Oreo build, even though my phone already had the official OTA Oreo on it. That fixed the connection issue altogether.
Click to expand...
Click to collapse
Wow. Glad to hear your issue is resolved. Who would ever think of going back to a beta build from an official build to fix a connection issue! I may try Xfinity mobile in the near future. Thank you.

rootnooby said:
Wow. Glad to hear your issue is resolved. Who would ever think of going back to a beta build from an official build to fix a connection issue! I may try Xfinity mobile in the near future. Thank you.
Click to expand...
Click to collapse
Yea, it was just a desperate move lol. Glad it'll be helpful for others.

I had the worst time making the XFinity mobile work on Android Pie with the October patches in place and finally got it working. Basically, there was no way to edit the APN configuration even with root on the device via actual Android. What I did to fix this was the following...
-Followed the rooting procedure to get TWRP and Fastboot installed
-I then used "Termux" to copy the APN points configuration file to a writable location. In my case I copied the file from "\system\etc\apns-conf.xml" to a "\sdcard\Download". Keep a copy of the original file.
-I then simply copied the file over to my computer and opened it in NotePad++. I did a search for the following string in single quotes: 'carrier="Verizon"\n mcc="311" '
-This should pull up 5 results in the search and you should confirm that each of the lines has the mnc value set to 480, 'mnc="480"'. On each of the sections that came up, I switched the following variables as shown below...
apn="COMCAST.RSLR.VZWENTP"
authtype="0"
protocol="IP"
roaming_protocol="IP"
-Once you have edited the file, copy it to a writable location on the device, like "/sdcard/Download".
-This then requires rebooting into recovery mode with TWRP and you will need to make sure you have encryption and a PIN disabled on your device to make sure you have full access to the device file system.
-Within the main TWRP page, select "Mount" and you will need to have the "System" and "Data" partitions selected.
-Return to the main page and select "Advanced" and then "File Manager".
-Next, locate the original apns-conf.xml that you copied earlier. It should show up as being in "/system/system/apns-conf.xml". Click on that file, and select "chmod 755".
-Next, navigate to where you have the edited apn file located. Copy that file over to replace the apns configuration file at "/system/system/apns-conf.xml". Just make sure you have a backup of that original file before replacing it.
-Finally, reboot your phone into the OS and you should magically have Xfinity mobile working.
This took a lot longer than I wanted to spend getting it working, but I believe this is because of the carrier ID and MCC being shared with Verizon instead of a separate one for XFinity mobile which forces it to default to the first Verizon APN setting which doesn't allow this to work. There are other ways to edit the APN configuration file, however I found it was quickest to do the actual file replacement with TWRP since that gives you full file system root access.

bschaff1 said:
I had the worst time making the XFinity mobile work on Android Pie with the October patches in place and finally got it working. Basically, there was no way to edit the APN configuration even with root on the device via actual Android. What I did to fix this was the following...
-Followed the rooting procedure to get TWRP and Fastboot installed
-I then used "Termux" to copy the APN points configuration file to a writable location. In my case I copied the file from "\system\etc\apns-conf.xml" to a "\sdcard\Download". Keep a copy of the original file.
-I then simply copied the file over to my computer and opened it in NotePad++. I did a search for the following string in single quotes: 'carrier="Verizon"\n mcc="311" '
-This should pull up 5 results in the search and you should confirm that each of the lines has the mnc value set to 480, 'mnc="480"'. On each of the sections that came up, I switched the following variables as shown below...
apn="COMCAST.RSLR.VZWENTP"
authtype="0"
protocol="IP"
roaming_protocol="IP"
-Once you have edited the file, copy it to a writable location on the device, like "/sdcard/Download".
-This then requires rebooting into recovery mode with TWRP and you will need to make sure you have encryption and a PIN disabled on your device to make sure you have full access to the device file system.
-Within the main TWRP page, select "Mount" and you will need to have the "System" and "Data" partitions selected.
-Return to the main page and select "Advanced" and then "File Manager".
-Next, locate the original apns-conf.xml that you copied earlier. It should show up as being in "/system/system/apns-conf.xml". Click on that file, and select "chmod 755".
-Next, navigate to where you have the edited apn file located. Copy that file over to replace the apns configuration file at "/system/system/apns-conf.xml". Just make sure you have a backup of that original file before replacing it.
-Finally, reboot your phone into the OS and you should magically have Xfinity mobile working.
This took a lot longer than I wanted to spend getting it working, but I believe this is because of the carrier ID and MCC being shared with Verizon instead of a separate one for XFinity mobile which forces it to default to the first Verizon APN setting which doesn't allow this to work. There are other ways to edit the APN configuration file, however I found it was quickest to do the actual file replacement with TWRP since that gives you full file system root access.
Click to expand...
Click to collapse
You couldn't cut and paste the file back with a root file manager? Maybe a magisk module? And does this lock you to Verizon?
Sent from my PH-1 using XDA Labs

avd said:
You couldn't cut and paste the file back with a root file manager? Maybe a magisk module? And does this lock you to Verizon?
Sent from my PH-1 using XDA Labs
Click to expand...
Click to collapse
I'm sure there are other ways to get the file back there, but I found my approach to be a quick bypass for other methods of getting root.
Regarding Verizon, It would probably break a Verizon connection for a sim carrier code of 311480. However, since this post is about Xfinity mobile, this is the quick way I got it working. In the future I want to change the priority on the APN configurations which may allow Xfinity mobile and Verizon to play nicely. The issues that have caused this are Android Pie restricting people from changing settings on the phones they own and Xfinity mobile being either too lazy or cheap to commit to their own carrier code and provide that information to manufacturers.

bschaff1 said:
I'm sure there are other ways to get the file back there, but I found my approach to be a quick bypass for other methods of getting root.
Regarding Verizon, It would probably break a Verizon connection for a sim carrier code of 311480.
Click to expand...
Click to collapse
Breaking a Verizon contract for sim carrier code would be a drastic move, considering.. The only money you have to spend is $5 on a Verizon prepaid phone card. Go into a Verizon corporate store and they will give you a sim, ( it's $20 if you don't go to the corporate store)
Sent from my mata using XDA Labs