Was able to install android version (NexusHD2-JellyBean-CM10.1 V2.2) via the nand method on my US htc hd2 on t-mobile which im new too. it runs great calls, texts etc however it says i have no internet connection it shows bars but with no 3g symbol or anything and when i try to use navigation or maps it says i have no internet connection. is this a problem with this rom or did i do something wrong?? please help everything else is great!! noob here as far as using this technique
Have you set up an APN?
Settings > Network > Access Point Names > *click menu* > New APN > *configure* > save > select the newly created APN
Marvlesz said:
Have you set up an APN?
Settings > Network > Access Point Names > *click menu* > New APN > *configure* > save > select the newly created APN
Click to expand...
Click to collapse
there are already apns set up already and the tmobile one is selected ??
xxfirerican said:
there are already apns set up already and the tmobile one is selected ??
Click to expand...
Click to collapse
they show one for simple, one for straight talk, tmobile us and tmobile us lte can someone please help i really need the data on my phone for gps and internet as my job requires me to have it enabled on my cell phone .
I don't know, if an APN is properly configured and selected, data should work UNLESS you're on cLK but have RMNET, your sim card is misplaced (is that even possible?), or you haven't enabled "data" in mobile network settings.
Marvlesz said:
I don't know, if an APN is properly configured and selected, data should work UNLESS you're on cLK but have RMNET, your sim card is misplaced (is that even possible?), or you haven't enabled "data" in mobile network settings.
Click to expand...
Click to collapse
do i enable the roaming as well does that work?
Was able to install android version (NexusHD2-JellyBean-CM10.1 V2.2) via the nand method on my US htc hd2 on t-mobile which im new too. it runs great calls, texts etc however it says i have no internet connection it shows bars but with no 3g symbol or anything and when i try to use navigation or maps it says i have no internet connection. is this a problem with this rom or did i do something wrong?? please help everything else is great!! noob here as far as using this technique
Click to expand...
Click to collapse
Are you using magldr or clk?
If magldr reinstall ROM (just clear dalvic cache and cache before, no need to clear data) and choose ppp instead of rmnet when asked.
Edit: do not reboot system, go back to recovery, reboot into recovery and fix permissions then reboot system..
Sent from my NexusHD2 using xda premium
I had a similar problem when installing NexusHD2-JellyBean-CM10. If I installed with factory reset or wipe cache, it would not work. If I re-flash over the top of it without wiping cache, it would work. Worth a try.
cosmosmoss said:
I had a similar problem when installing NexusHD2-JellyBean-CM10. If I installed with factory reset or wipe cache, it would not work. If I re-flash over the top of it without wiping cache, it would work. Worth a try.
Click to expand...
Click to collapse
its on ppl and still no internet i can send and receive messages though ??
xxfirerican said:
its on ppl and still no internet i can send and receive messages though ??
Click to expand...
Click to collapse
Did you do this:
shanman-2 said:
Are you using magldr or clk?
If magldr reinstall ROM (just clear dalvic cache and cache before, no need to clear data) and choose ppp instead of rmnet when asked.
Edit: do not reboot system, go back to recovery, reboot into recovery and fix permissions then reboot system..
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
??
Related
Hello guys,
I have a sim unlocked, bootloader unlocked, 4.5.91 gingerbread, AT&T atrix 4g on Fido network in Canada.
I made the apns using the same apns from when i was using .81 but I can not seem to connect via 3g/2g/gprs. The only way to use the internet is via WIFI.
What do you think is the problem?
try a reboot...
I'v rebooted at least 10 times now
did you make a backup?
You can go into your Mobile Settings and do a 'reset to defaults'.. otherwise, if you made a backup of you system file, you can copy 'apns-config.xml' from /System/etc to the same directory on you phone...
I had the same issue, I just did the 'reset to defaults' and got my apns back.. but going to copy my previous apns-config.xml file cus that had custom apns..
hope that helps..
I alread have tried reseting to default and adding the APN's again.
as far as system back ups, I dont have one
You can find the apn settings online, i would create a new apn and put those settings you find in. I had issues with mine, and when I did that, it fixed my problems. I put a link below that has the apn settings.
androidforums.com/htc-inspire-4g/276917-inspire-4g-apn-settings.html
Edit: sorry, I didn't realize you weren't using att...but same idea, just manually set up your apn network
Also, you could have the wrong mobile radio installed. I know that they are set to pick up certain frequencies and that radio might not work on fido.
Sent from my MB860 using XDA Premium App
HungryEel said:
I alread have tried reseting to default and adding the APN's again.
as far as system back ups, I dont have one
Click to expand...
Click to collapse
Hmm.. that is weird, maybe you can pull the apns-config.xml from one of the Bell ROMS or from one of the P-ROMs floating around in Dev section to replace what you have now for APNs... just adb it to /System/etc/ , then reboot and go back into your APN settings to see if doing another reset to defaults will work if they don't show up after the reboot..
DarylT said:
Also, you could have the wrong mobile radio installed. I know that they are set to pick up certain frequencies and that radio might not work on fido.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
How do I check what radio version I have installed?
as far as icons are concerned, I get H+ icon
Go to about phone in settings and its under baseband version. I had a similar but not same problem, which was solved by resetting the apns as that seemed not to work in your case. I would try to flash a new radio.
Sent from my MB860 using XDA App
N_01.77.30P is my baseband.
How do i flash a new radio? sorry for being such a noob
Ah.
Here is a new radio:
http://briefmobile.com/download-android-2-3-4-gingerbread-for-motorola-atrix-4g
Its at the bottom and for you I would use the .sbf, i have no clue whether this will work with your carrier... If you would prefer a .zip to flash with CWM I can give you one
HungryEel said:
N_01.77.30P is my baseband.
How do i flash a new radio? sorry for being such a noob
Click to expand...
Click to collapse
I have the same problems after 2 day of 4.5.91 update I loss the complete data conection, any apn that I usualy use work, I dont have any idea to solver the problems, work only for wifi, I use a diferent radios and is not solver the problem. I have a atrix AT&T root + bl unlock + 4.5.91 + 30p radio.
Here's a CWM zip file of ton of APNs. Just install and go to your APN list and reset to default. If it's an APN issue. As far as radio, not sure which you need for your area. http://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1189497&v=1&libid=1313370618834&out=http%3A%2F%2Fwww.multiupload.com%2FXW7FT9N3Z4&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D997&title=%5BROM%5D%20CHERRY%CF%80%20%26%20%CF%80CRUST%20v0.7%20%5BAT%26T%5D%20%5BINTL%5D%20%5BGB%5D%20%5BD3%20Camera%20w%2F%201080p%5D%20-%20xda-developers&txt=%3CFONT%20size%3D5%3ELarger%20APN%20List%20from%20v0.3%3C%2FFONT%3E&jsonp=vglnk_jsonp_13133705901661
Is not a APN problem, i dont know why but i loss the data connection after upgrade and BL unlock...
if anybody has a solution, please, post it.
Thx
You can get the bell radio from this thread (fruitcakes)
http://forum.xda-developers.com/showthread.php?t=1163009
Make sure that you are using the correct kernel for your phone.
Lastly, these are the fido APN settings I use; they work as a single APN.
name
Fido Internet
apn
internet.fido.ca
proxy
not set
port
not set
username
fido
password
fido
server
not set
mmsc
http://mms.fido.ca
mms proxy
205.151.011.013
mms port
not set
mcc
302
mnc
370
authentication type
not set
apn type
not set
Just a (possibly) stupid question, but after you reset to default and input your apn settings, are you clicking on it so that it is highlighted in green?
If all of that doesn't work, I would try re-flashing whichever rom you are using through CWM recovery and see what happens.
To every Android-God out there...
The only thing I can see after pressing the NORMAL start-button is the "revolutionary"-start-screen. Going to recovery only shows the ROM-Manager. Selecting one of the items possible then only shows the rotating circle with his hat on it. No action is possible.
I have a complete backup on SD-Card and computer and Dropbox from the state before flashing.
Do I have an expensive paper weight or is there a chance to get my wildfire back to life?
Once you enter Recovery Mode, select stuff with the Trackball, not with the Power button. This should solve your issue.
...how could I only forget...!!!
Thanx a lot!
Next problem is:
I can browse the directory now but phone finds no ROM on SD.
How can I install the HTC-drivers and a ROM directly from PC or from PC to SD so the phone can recognise them?
Its not supposed to automatically find the ROM's Zip. Place the ROM's Zip file on your SDCard, then, in Clockworkmod Recovery, browse to "Install Zip from SDCard", and select the ROM's Zip file manually. I am assuming you are trying the option called "Apply Update.zip" ?
legasthener said:
...how could I only forget...!!!
Thanx a lot!
Next problem is:
I can browse the directory now but phone finds no ROM on SD.
How can I install the HTC-drivers and a ROM directly from PC or from PC to SD so the phone can recognise them?
Click to expand...
Click to collapse
got now CM7 following this post
http://forum.xda-developers.com/showthread.php?t=1145035
and have internet access via wifi but 2G/3G doesn't work. How can I fix this?
legasthener said:
got now CM7 following this post
http://forum.xda-developers.com/showthread.php?t=1145035
and have internet access via wifi but 2G/3G doesn't work. How can I fix this?
Click to expand...
Click to collapse
Check your APN (Access Point) details. Settings > Wireless and Networks > Mobile Networks > Access Point Names
A big Thank You again...
...there are three issues to choose from and only one can be chosen
- E-Plus WAP GPRS
- E-Plus Web GPRS
- E-Plus MMS
which of these must be set how...?
I'd go with wap gprs.
I don't know really but that's the one I'd try first.
Sent from my HTC Wildfire using xda premium
...nice hint...!
But which data have I to fill in which form???
Standard doesn't help.
...furthermore there is another problem!
The battery was empty so I needed to load it but couldn't start the phone in loading-mode.
Have to load the battery a bit then pull the plug, then start the device again and load to the end.
...strange...
Since flashing Android Revolution yesterday I have been unable to connect to the Internet unless I use wifi.
I have a 3gb data allowance and I'm no where near that limit.
There is no G, 3G, or H symbol, just the signal symbol
Sent from my Desire HD using xda premium
Hi,
here some ideas maybe some will help you.
1. Did you check the md5 of the rom?
2. Have you enbled the Mobile data?
3. Did you have set the apn for your provider?
(Menu-Settings-Wireless/Networks-Mobile Data-Accespoints)(Sorry if the names are not 100% right i use German version)
4. Maybe set Network mode on GSM/WCDMA Auto?
5. Maybe some Radio or Kernel Problem?
If nothing helped try posting again in ARHD Thread
Greetings
same problem
Are you using the recommended radio?
This is most likely the problem.
"3. Did you have set the apn for your provider?
(Menu-Settings-Wireless/Networks-Mobile Data-Accespoints)"
Mobile data settings are not stored on "sim" like "sms" settings. You need to manual input them each time you flash. You should find these settings on your providers website on the support page. Once you find them copy/paste/save for future reference. It only takes a few seconds to put them back in.
If you use Titanium Backup these settings are saved in system data backup for future restore, but its recommended only to restore apps+data when flashing a new rom to avoid conflicts.
FurryCup said:
This is most likely the problem.
"3. Did you have set the apn for your provider?
(Menu-Settings-Wireless/Networks-Mobile Data-Accespoints)"
Mobile data settings are not stored on "sim" like "sms" settings. You need to manual input them each time you flash. You should find these settings on your providers website on the support page. Once you find them copy/paste/save for future reference. It only takes a few seconds to put them back in.
If you use Titanium Backup these settings are saved in system data backup for future restore, but its recommended only to restore apps+data when flashing a new rom to avoid conflicts.
Click to expand...
Click to collapse
I agree with FurryCup. APN is responsible for mobile devices to connect to the Internet. To check or set up your APN, you should go to Menu>Settings>Wireless & Networks>Mobile Networks>Access Point Names. You can either add a new APN or edit an existing. Just make sure you have the correct APN settings.
I agree with FurryCup.
Also for future use, you can use APN Backup & Restore / Android Market to save your original APN to your sd card (as an xml file).
Also keep APN Backup & Restore apk on your sd card. (Source)
Every time you flash a new rom - install APN Backup & Restore (from the apk on the sd card), delete the APNs which came with the new rom, restore the original APN which you saved - from your sd card.
Then choose that APN in the phone settings as FurryCup mentions.
Then you can access the correct network as your carrier provides with your phone and contract.
Note: APN Backup & Restore doesn't work with Ice Cream Sandwich.
not sure if its any help to you, BUT... when i installed the rom (my first ever rom) i couldnt manage to install the radio that i was ment to, and everything works fine.
so not sure if the radio you've installed has anything to do with it.
It was the APN, the ROM had automatically set Virgin APN as default when I'm actually on T-Mobile, so I selected the right one and it was working fine.
My phone usually automatically knows my APN details and sets them as default, but it didn't with ARHD for some reason.
Thanks for the replies
Sent from my Desire HD using xda premium
CuBz90 said:
It was the APN, the ROM had automatically set Virgin APN as default when I'm actually on T-Mobile, so I selected the right one and it was working fine.
My phone usually automatically knows my APN details and sets them as default, but it didn't with ARHD for some reason.
Thanks for the replies
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
When you first flash the rom it asks for the carrier to use. Maybe you hit the wrong option?
zelendel said:
When you first flash the rom it asks for the carrier to use. Maybe you hit the wrong option?
Click to expand...
Click to collapse
No I definitely chose T-Mobile. The APN details for both T-Mobile and Virgin were there, but Virgin was selected as default.
Sent from my Desire HD using xda premium
Tried flashing a different kernel?
Carried in by pigeon escort
snowpatrol1702 said:
Tried flashing a different kernel?
Carried in by pigeon escort
Click to expand...
Click to collapse
I got it working a few days ago, the wrong apn settings were selected.
But thanks anyway
Sent from my Desire HD using xda premium
Hi everyone,
So I've rooted my Kindle Fire and installed the Google Android Market. When I'm on my home Internet connection, I can download/install any books/apps I please. However, when I try to do so on another Wifi connection, say, at a friends house, I am always shown an "Invalid File" error after the download completes.
I've read that clearing the cache can sometimes fix it, but I've not been able to find how to do that in any of the Settings menu.
Does anyone know how to fix this?
Thanks a lot in advance
don't think it has something to do with your kf
maybe he is running a firewall on the router and blocking some ports
b63 said:
don't think it has something to do with your kf
maybe he is running a firewall on the router and blocking some ports
Click to expand...
Click to collapse
I can try. Do you know which ports I should ensure are open?
I've tried on several different Wifi connections and all of them except for mine give the same error.
I cleared the cache/data of the Market.
don't know the ports - sorry
but an other idea:
do you possibly use a fixed ip adress on the kf ?
b63 said:
don't know the ports - sorry
but an other idea:
do you possibly use a fixed ip adress on the kf ?
Click to expand...
Click to collapse
I did check to see if any of the Wifi connections where on a static IP connection because I read somewhere that turning that off might help, but none of them where.
BIGboy! said:
I did check to see if any of the Wifi connections where on a static IP connection because I read somewhere that turning that off might help, but none of them where.
Click to expand...
Click to collapse
maybe resetting your wifi settings helps:
http://forum.xda-developers.com/showpost.php?p=21405957&postcount=3
b63 said:
maybe resetting your wifi settings helps:
http://forum.xda-developers.com/showpost.php?p=21405957&postcount=3
Click to expand...
Click to collapse
I tried that and connected to the Wifi for next door and it still gave me the error. The only connection it works on is the connection that was used to setup the Google Market.....no other connections work. It's almost like it's somehow locked to that internet connection....
I appreciate all of your help by the way mate.
BIGboy! said:
I tried that and connected to the Wifi for next door and it still gave me the error. The only connection it works on is the connection that was used to setup the Google Market.....no other connections work. It's almost like it's somehow locked to that internet connection....
I appreciate all of your help by the way mate.
Click to expand...
Click to collapse
what version of the market do you use ?
i'm using 3.4.4 from here:
http://forum.xda-developers.com/showpost.php?p=20240542&postcount=8
can download as soon i'm connected regardless of the wifi
it's a miracle ...
b63 said:
what version of the market do you use ?
i'm using 3.4.4 from here:
http://forum.xda-developers.com/showpost.php?p=20240542&postcount=8
can download as soon i'm connected regardless of the wifi
it's a miracle ...
Click to expand...
Click to collapse
The version I had was 3.4.4.
I reset the device to factory settings and installed it again and the problem is still there. Gee this is annoying.
BIGboy! said:
The version I had was 3.4.4.
I reset the device to factory settings and installed it again and the problem is still there. Gee this is annoying.
Click to expand...
Click to collapse
If you made any recent backups try restoring the cache
ZzHacks said:
If you made any recent backups try restoring the cache
Click to expand...
Click to collapse
I tried that, no luck.
as last idea maybe uninstall / reinstall market ?
b63 said:
as last idea maybe uninstall / reinstall market ?
Click to expand...
Click to collapse
I did that several times. In fact, I've downloaded a CM7 rom and install it. And the Market. Guess what?; the same bloody "Package File is Invalid" error.
It must be something to do with the Internet connection because earlier today, I was at a new Wifi connection and it worked there too! But straight away when I went over to a Wifi connection that it wouldn't work in the past, and it still wasn't working. This is really bloody annoying me.
found a post - maybe a hint in the right direction:
This may or may not be relevant to your situation, but here's what the deal was with mine. I have CyanogenMod 7.1 installed, which puts dalvik-cache in the /cache partition instead of /data.
When you install apps from the Market, it downloads the .apk to /cache/downloads and installs it from there. If you don't have enough room in /cache/dalvik-cache for the installer to put the necessary files there, the install fails with a "package file is invalid" error.
There's nothing wrong with the package file at all. It's purely a matter of not having enough space in your /cache partition.
(forgive me if you see this exact same post in multiple places - if I'd known weeks ago that it wasn't really an "invalid package file" issue, it would've saved me a ton of useless googling - I'm just trying to spare others the same hassle)
Click to expand...
Click to collapse
therefore would try to boot to twrp and clear dalvik/cache
b63 said:
found a post - maybe a hint in the right direction:
therefore would try to boot to twrp and clear dalvik/cache
Click to expand...
Click to collapse
Hi, Thanks a lot for that, but I've tried that too and it didn't get it working. I think it's something about the DNS/Ports as that would be the only way to explain why it always works on some connections, but not others. On all of the connections, it connects and fully downloads the file, it just can't install them.....
dns ? then i have some:
Addresses are cached for 600 seconds (10 minutes) by default. Failed lookups are cached for 10 seconds. From everything I've seen, there's nothing built in to flush the cache. This is apparently a reported bug http://code.google.com/p/android/issues/detail?id=7904 in Android because of the way it stores DNS cache. Clearing the browser cache doesn't touch the DNS, the "hard reset" clears it.
Click to expand...
Click to collapse
go into settings -> applications -> Network Location -> Clear data
Click to expand...
Click to collapse
run /etc/init.d/nscd restart
That assumes android is running nscd
Click to expand...
Click to collapse
b63 said:
dns ? then i have some:
Click to expand...
Click to collapse
How/where do I run /etc/init.d/nscd restart?
In CMD with ADB I assume?
I'm a noob.
would think so - but i'm not shure if this is existent on the kf - can't take a look - don't have it with me - check with a file explorer or adb (ls -l) if it is there
Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
skulljoi said:
Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
Click to expand...
Click to collapse
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
Worked for me (2)
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
i has enabled data romaing but national data roaming off, will try with this option enabled now, tks
did you know how the CM10 work with auto enable/disable sync and 3g connection?
on preview version i has an option, turn of sync and 3g after a X mim with no incomming news or something like that
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
skulljoi said:
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
Click to expand...
Click to collapse
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
eduwp90 said:
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
Click to expand...
Click to collapse
i was on 2.3.6 BR and the update to CM10, and the problem began
i am getting other issues like, cant merge PROFILE with my google account and some slowly process
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
Thanks alot for your hard job, this ROM is AMAZING!
I have signal drop after install this ROM (using version 2012/7/21).
To solve my problem, I copied the File_GSM and File_Seem_Flex_Tables files from my stock ROM (Retail Brazil) and replace the CM9 files.
I put the files in /system/etc/motorola/bp_nvm_default and reboot, and now I have strong signal and no more drop calls.
The ROM CM9 to Motorola Bravo CrystalTalk function is supported. I tried to copy the file Phone.apk this ROM for the Milestone 2 and the option to configure the CrystalTalk appears in the phone settings, but after a reboot the settings are lost.
ATTACHED FILES
bp_nvm_default.zip - [Click for QR Code] (1.2 KB, 29 views)
Click to expand...
Click to collapse
I've tried this procedure in CM10 and it works!!
cruizgaray said:
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
I've tried this procedure in CM10 and it works!!
Click to expand...
Click to collapse
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
mike_oldfield said:
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
Click to expand...
Click to collapse
Ok I will try this. I've extracted the files from a gb nandroid backup so I think that this is almost the same but I will give it a try.
I've also used the baseband switching app with no luck.
Anyone knows witch files manage the 3g on our phones¿ I replaced the ones that are listed in the above posts but are there others?
Thank you mates
Sent from my A953 using xda app-developers app
Hi,
I got the same problem for Wifi and in minor way for 3G with mine (my baseband is EPU93_U_00.60.00).
I deactivated the national roaming but reactivated it now for testing ...
For the Wifi I tried to disable 802.11n in the tiwlan.ini file but seems to not work.
I'll try to do the requested log readings from tezet when I would have time.
A message for lotan_rm, you're not the alone one (also need to reach 10 post for posting in dev )
eduwp90 said:
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
lucasdeeiroz said:
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
Click to expand...
Click to collapse
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
what country you are?
which SBF (stock froyo) that gives you a good data conection? (full name)
eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
lucasdeeiroz said:
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
Click to expand...
Click to collapse
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
eduwp90 said:
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
Click to expand...
Click to collapse
So you have a big problem... Anyway, the files only let the mobile data working for more time, but don't "forever"... Now this problem appears after some hours.
So this problem is not solved at all?
Sent from my A953 using xda app-developers app
eduwp90 said:
So this problem is not solved at all?
Click to expand...
Click to collapse
Before overwriting files my connection was break after few minutes
After overwriting files data connection was extended to few hours
I could not get a continuous data conection in custom ROM