hello, please help me.
on my galaxy s3 neo(i9300i)
i have flash latest farmware from sammobile 1 file farmware( tar.md5) using odin, i have successfully flash stock farmware but not updated bootloder basbend version, i have tried 2times but no luck.
how can i do that?
try it like this: google the firmware with 4 files, ap, csc, bl, cp, for hard reset, install it with odin, after the first boot reinstall the latest firmware, I recommend the Greek one.
so I solved it
Related
I've just bought an S5 G900F Euro version which had Kitkat on it.
Tried to update Bootloader&Modem so that I could install Lollipop ROM using odin.
It didn't work and phone wouldn't reboot.
From Samsung website downloaded latest Firmware G900FXXU1BOD3, but odin keeps failing because of ext partition.
I installed TWRP, rebooted to recovery, it automatically fixed partion, rebooted but stuck on boot screen.
Re tried again once partition was fixed got the Android is updating but is now stuck on "starting apps".
Any suggestions would be very welcome.
Thanks.
You didn't need to update modem and BL to upgrade from KK to LP
Anyway, try flashing the PIT file along with the stock LP ROM (Same time in ODIN)
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
*Detection* said:
You didn't need to update modem and BL to upgrade from KK to LP
Anyway, try flashing the PIT file along with the stock LP ROM (Same time in ODIN)
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Click to expand...
Click to collapse
Thanks for the link for the PIT file and information.
Phone now working.
The reason I wanted to update bootloader+modem was that it was a requirement of the ROM I wanted to install.
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Hi,
I tried to flash a stock firmware today using odin, however it failed. On my phone it says custom boot binary blocked by fap lock, but i am flashing stock firmware only. I have never rooted or unlocked the bootloader. Now my phone is stuck in the downloading mode. How do i fix this or successfully flash?
Regards,
I tried everything, now i get a secure lock error?
To recap, i have a g935w08 and i was trying to flash the BTU firmware (G935F) which i downloaded from samfirm, i used all the BL, AP, CP, CSC (used regular CSC) and it refuses to work. I am using odin 3.12.
Who can help me with this?
Try odin 3.11.1 as it says on the download page, failing that, try and flash your original firmware.
Instructions at the bottom of this download page: https://www.sammobile.com/firmwares/download/116121/G935FXXU1BPLB_G935FBTU1BPK3_BTU/
I gave up. Could it be due to the fact that i am trying to flash a G935F firmware onto G935W?
yes that's very possible, in your post above you said you have a G935F ?
"To recap, i have a g935F and i was trying to flash the BTU firmware"
@Seanie280672 I have updated it now. Does anyone know if this is possible?
My device got FRP locked and so I used Odin to flash the official firmware from Sammobile and now I have T mobile menus like personal hotspot in my settings apps even though my device is the Wi-Fi only tab A 2016.
Here's how I got here:
I flashed the correct firmware, and in Odin I flashed the ap file, that's all. It succeeded but when installing updates, it said no command and went to the stock recovery. I factory wiped and rebooted.
How do I get rid of the T mobile menu's?
Any help would be appreciated
FIXED: Reflash in Odin with BL and CSC file
Same
I got the same problem, fixed it by flashing ap and csc
I live in the US and chose the XAR version from Frija
Now my lockscreen doesn't work, how do i fix it?
I do have problems - Wifi and BT can't be enabled. So I want to reflash Stock Rom.
In the manual at sammobile.com is mentioned to flash 4 partitions, AP, BL, CP, CSC - but in the download zip file there is no CP file (Modem/Radio).
I assume a reflash of CP might useful to recover Wifi/BT. How to get this file? Anything else I can do?
In the stock firmware there should be 4 files. I have this tab and have flashed OS without any problem. While downloading the firmware pls, Check the region and build number.