I've just bought an S5 G900F Euro version which had Kitkat on it.
Tried to update Bootloader&Modem so that I could install Lollipop ROM using odin.
It didn't work and phone wouldn't reboot.
From Samsung website downloaded latest Firmware G900FXXU1BOD3, but odin keeps failing because of ext partition.
I installed TWRP, rebooted to recovery, it automatically fixed partion, rebooted but stuck on boot screen.
Re tried again once partition was fixed got the Android is updating but is now stuck on "starting apps".
Any suggestions would be very welcome.
Thanks.
You didn't need to update modem and BL to upgrade from KK to LP
Anyway, try flashing the PIT file along with the stock LP ROM (Same time in ODIN)
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
*Detection* said:
You didn't need to update modem and BL to upgrade from KK to LP
Anyway, try flashing the PIT file along with the stock LP ROM (Same time in ODIN)
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Click to expand...
Click to collapse
Thanks for the link for the PIT file and information.
Phone now working.
The reason I wanted to update bootloader+modem was that it was a requirement of the ROM I wanted to install.
Related
After flashing 4.3 leak on my I9500 using Odin 3.09, it doesn't boot up as it should, I have wiped data/cache, but to no avail. I even flashed the Russian official 4.3 firmware, but it just doesn't boot up as it should.
When I turn on the phone, the phone stops right after the "Galaxy S4 I9500," screen. I see a black screen right after that.
I tried to downgrade my phone using Odin 3.09, 3.07 and 3.04, but it keeps failing. My S4 shows "unsupported version," when I try to flash stock 4.2.2.
I am guessing this is probably happening because of the newer bootloader, the newer bootloader is making it impossible to downgrade to an older version.
exclaimed said:
After flashing 4.3 leak on my I9500 using Odin 3.09, it doesn't boot up as it should, I have wiped data/cache, but to no avail. I even flashed the Russian official 4.3 firmware, but it just doesn't boot up as it should.
When I turn on the phone, the phone stops right after the "Galaxy S4 I9500," screen. I see a black screen right after that.
I tried to downgrade my phone using Odin 3.09, 3.07 and 3.04, but it keeps failing. My S4 shows "unsupported version," when I try to flash stock 4.2.2.
I am guessing this is probably happening because of the newer bootloader, the newer bootloader is making it impossible to downgrade to an older version.
Click to expand...
Click to collapse
ok try this first use the cf root provided in the cf root thread and then dload the latest 4.2.2 http://samsung-updates.com/details/14135/Galaxy_S_4_Exynos_Octa/GT-I9500/XFE/I9500XXUBMH1.html from here and flash it see what happens
Solved.
The problem was that I didn't flash the stock rom that came with my phone. I flashed that and my phone was restored to its factory settings. However my imei was messed up, it was showing me 0049. I rooted, flashed twrp recovery and used twrp to restore from a backup and I got my imei back along with my data.
I will wait for 4.3 to become flashable and see how it goes then.
hypergamer1231 said:
ok try this first use the cf root provided in the cf root thread and then dload the latest 4.2.2 http://samsung-updates.com/details/14135/Galaxy_S_4_Exynos_Octa/GT-I9500/XFE/I9500XXUBMH1.html from here and flash it see what happens
Click to expand...
Click to collapse
Hi, I got back from version 4.2.2 to say. Thank you. But the 4.2.2 's what I want to install other versions (eg Russian version) still odin error. Is it possible to install other versions?
volkantipi said:
Hi, I got back from version 4.2.2 to say. Thank you. But the 4.2.2 's what I want to install other versions (eg Russian version) still odin error. Is it possible to install other versions?
Click to expand...
Click to collapse
i had this issue on my gs3 , try to move the odin md5 rom file and the odin folder to C: or my documents . maybe one of those directories where u have them right now are too large (odin has issues with long directories)
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
jaythenut said:
http://forum.xda-developers.com/showthread.php?t=2507403 flash this with cwm or twrp should work
Click to expand...
Click to collapse
Hello thanks for replying.
Only problem is I cannot get into cwm or twrp. Any advice on what I can do to try to get CWM or twrp working? I can flash with ODIN. But with the CWM I tried it still just boot loops and does not allow me to get into recovery.
Thank in advanced.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Same Issue here. I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
Robbbie said:
Hey guys
I have a Hong Kong Note 3 N9005. Yesterday I flashed the 4.4.2 sammobile update to my phone using ODIN 3.09. I had auto reboot and f.reset ticked. The ROM was put in AP and I hit start. Then I received the error Invalid ext4 Image. Turns out that Hong Kong versions of the N3 cannot install European ROMs. Since then I have not been able to boot my device into android. I just loop into download mode telling me it detected a firmware update. Kies was no help.
The update DID update the bootloader, so now I cannot go back to stock ROM. I have tried a few things. I tried flashing the stock Hong Kong ROM MK1, it fails. So i found a guy that fixed a similar problem buy removing the aboot.mbn file and repacking the ROM. Tried that too and the ROM flashes but it leaves me in a bootloop. Phone turns on says booting recovery then restarts. I also tried cf-root in an effort to flash another ROM still not working. I cannot get into recovery mode no matter what I do.
It seems I have run out of ideas and am reaching out for help.
Click to expand...
Click to collapse
Got this response from MrAndroid12 in another thread I'd started:
"This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine."
I don't know how to add a .pit file though.
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
hallydamaster said:
I am certain the bootloops are because it flashed the new bootloader. I think your best option is to wait for a dev like indie to release Omega V7 and try to flash that through Odin.
Or if you can extract the different partitions from the original thread you can try push them one by one with Odin.
Click to expand...
Click to collapse
It is the bootloader yes. But it NEEDS the bootloader to be able to boot in to KitKat. And there is no downgrading once you've installed the new BL.
Best option is to re-flash via ODIN again and not wait 2 weeks for a Dev to modify a custom ROM...
Solution
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
m1ndst0rm said:
Here is the solution:
http://forum.xda-developers.com/showpost.php?p=49426283&postcount=14
Click to expand...
Click to collapse
Works thanks
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hello,
I have an unsuccessful firmware update.
First flashed the last stock rom, cf-autoroot. After it I try to flash the CWM, and this is the end,
Now there is no boot loader, no recovery. I see the "Firmware update encountered an issue...".
The knox is 0x1, Writeprotect enabled.
The only thing is working on the phone is the download mode, but every attempt to flash in Odin fails. (aboot.mng..Fail)
I tried to flash another bootloaders, repartition with pit file, but not works...
Done it on other PC, usb ports...
Now I know what was the wrong with the installation, but I need a solution for this situation.
Please, help me...
You will have to flash through ODIN Kit Kat. You cant come back to 4.3 or 4.2.2 if ya flashed android 4.4.2 and u updated the bootloader. Select one android 4.4.2 firmware in SamMobile for you and update ur phone :highfive:
Thanks for the reply...
The last firmware I flashed was 4.3, and I cannot reflash it.
But I will try a Kit Kat, which one is good for me? I have an unlocked phone and my country (Hungary) does not have it yet.
Can I flash it with knox 0x1?
Thanks for the advice, the phone is working now....
The whole story:
- the phone had 4.3 custom ROM before.
- I flashed the new version with 4.4.2: new recovery, modem and ROM.
- From here I had no sound. I tried to flash everything 3 times, an no sound.
- I searched for this, threre were many good advice, I tried some and the phone not booted.
- Downloaded the latest Samsung firmware (I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF), flashed and no sound.
- extracted the modem.bin, flashed, and flashad the ROM again, sound is good, I was very happy.
- CF-autoroot, I saw it was working
- Flashed the CWM recovery, Fail in Odin and...no boot, no recovery, only download mode.
- Flashing the original downloaded firmware (I9505XXUEMKF_I9505OXXEMK3_I9505XXUEMKF) is failed. I don't understand, it is not downgrade...
- Flashing a new Kit Kat (I9505XXUFNB9_I9505EURFNB1_I9505XXUFNB9) was successful.
How can I use a custom ROM again?
I am afraid, if I make an error, cannot flash again the same, I have to wait a new one?
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Hello,
My Note 4 is rooted , emotion nightly with twrp, using stock rom samsung marshmallow
today I received a software update for the marshmallow firmware.
the update is a zip file
I tried to flash the update using twrp, but it failed. As I understood twrp can't flash zip files, only tar
I tried to flash the update using odin, but it failed. is this the same with odin?
maybe I am doing something wrong
is there by any chance a possiblity to flash the update or do I need to install the complete new stock firmware ?
thanks in advance, kind regards, coinco
How did you recieved the update ?
If you downloaded it from sammobile
Then first extract the zip file , if you get an .tar file , only then you can flash it with odin .
You simply cant flash an official update through any unofficial software , so dont try to flash it in custom recovery .
Reporting via N910G.
Thank you, for your answer,
I received the update, through (F) OTA,
so as I understand correctly, it will not be possible to flash the file.
It will be no problem , I will flash the original new firmware.