Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Related
Hi, I came from 4.3 rooted but untripped knox firmware. Now I have updated to 4.4.2 Singapore firmware but have maintained to keep knox intact and root using MOP and PC Odin for flashing bootloader. My problem is, whatever I do, the keyboard and pen input keeps force closing. I have tried reflashing, reset and data wipe. I used the bootloader from the leaked firmware as I have no idea how to extract the bootloader from the firmware. Did I do something wrong? Any help is appreciated. Thank you!
Or can anyone teach me how to extract the bootloader from the firmware? Or convert the 1 file firmware to 3 files firmware which have BL separated. Thanks!
janreiviardo said:
Or can anyone teach me how to extract the bootloader from the firmware? Or convert the 1 file firmware to 3 files firmware which have BL separated. Thanks!
Click to expand...
Click to collapse
Go to Sammobile.com. You can download the poland rom and it is broken up into 4 parts (BL - bootload, AP, CP and CSC).
Get ODIN 3.09 and flash JUST the BL part in the appropriate space.
Just remember though, once you update the bootloader, you can't go back to JB....
Wassup guys, ive been searching the forum for going on three days now trying to revert back to stock. i keep getting fails through Odin 3.09 and 3.07. Crazy thing is that i have a baseband of mj5 and a build number of mi9. Im on my last nerve with this. Had the phone since Oct. and love it to death. But right now im ready to take it out and practice shooting. Im a fairly knowledgeable with odin and flashing in recovery but this has me at a stand still. Any help as soon as possible would be greatly appreciated. I have downloaded the MI9 files for odin (BL, AP,CP,CSC,PIT) for MJ5 i have (BL,AP,CP,PIT). If im missing some files or doing something wrong a link to a good tutorial would help. Thanks
Just tried flashing mI9 firmware in download mode and got SW REV CHECK: (sbl1) fused2> binary 1
did the whole *#1234# and got AP Mj5 and CP MI9
Confusing.
Be more clear instead of shooting the phone.
What custom rom you were on, if i understand you correct? Android version and your firmware?
kenny1991 said:
Confusing.
Be more clear instead of shooting the phone.
What custom rom you were on, if i understand you correct? Android version and your firmware?
Click to expand...
Click to collapse
No custom rom, 4.3 Baseband says MJ5. Build number says MI9. i dont know if they are supposed to be the same. I was rooted and unrooted. Just trying to get it back to days 1, fresh out the box, Bone stock.
Ok i did the *#1234# now my AP is N900AUCUBMI9,
CP is N900AUCUBMJ5,
and my CSC is N900AATTBMI9.
this is confusing the hell outta me. in the earlier post i didnt have a CSC. only the AP and CP.
Flash a newer firmware or same as your last firmware. I assume you can't downgrade to the original firmware if you have updated once to a newer one as bootloader gets locked.
Or flash 4.4.2 with Odin 1.85
kenny1991 said:
Flash a newer firmware or same as your last firmware. I assume you can't downgrade to the original firmware if you have updated once to a newer one as bootloader gets locked.
Or flash 4.4.2 with Odin 1.85
Click to expand...
Click to collapse
I have tried that also. I dld the N900AUCECMLG.zip for the phone but when i unzip it im at a loss for what to do with the files. i dont know if it should be done in recovery or what files to use with odin. I dont see any tar or md5 files.
You have [email protected]? If so this is the correct firmware for you.
http://www.sammobile.com/firmwares/3/?download=25106
From there you can see instructions to how to flash. Read carefully. Don't panic.
Download rom. And use e.g winrar ro open just once when the files are downloaded. You are extracting twice and stop doing so. Open onse and drag and drop files to your e.g desktop. Once you do this you get md5.
You put the phone into download mode when flashing firmware. Turn it off. Volum down+home+power button at same time when asked if you want to continue press Volum up. Then you are in download mode.
Why do you even flash anything if you can't basics. Read more. If you still can't do this all before attempt or ask a friend to do it for you.
I've just bought an S5 G900F Euro version which had Kitkat on it.
Tried to update Bootloader&Modem so that I could install Lollipop ROM using odin.
It didn't work and phone wouldn't reboot.
From Samsung website downloaded latest Firmware G900FXXU1BOD3, but odin keeps failing because of ext partition.
I installed TWRP, rebooted to recovery, it automatically fixed partion, rebooted but stuck on boot screen.
Re tried again once partition was fixed got the Android is updating but is now stuck on "starting apps".
Any suggestions would be very welcome.
Thanks.
You didn't need to update modem and BL to upgrade from KK to LP
Anyway, try flashing the PIT file along with the stock LP ROM (Same time in ODIN)
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
*Detection* said:
You didn't need to update modem and BL to upgrade from KK to LP
Anyway, try flashing the PIT file along with the stock LP ROM (Same time in ODIN)
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Click to expand...
Click to collapse
Thanks for the link for the PIT file and information.
Phone now working.
The reason I wanted to update bootloader+modem was that it was a requirement of the ROM I wanted to install.
Hi,
i am trying to fix software on my note3 but i have problems finding the right files.
There is Bootloader, PDA, CSC and Baseband but i don't know how to upgrade it to the correct versions.
For example i found Version OK9 here: http://forum.xda-developers.com/galaxy-note-3/general/direct-download-bootloaders-modems-t3258803
But there is no file to update PDA, CSC and Baseband?
I installed the KERNEL file and it changed the Kernel. Did not try RECOVERY yet because i think it could overwrite the Custom Recovery TWRP that is installed now.
In older post i also found some "CP" files for OJ6 and OK6 and they installed new version for PDA but i can not find them for OK9?
Can anybody please explain the different files and how to find the right versions?
I downloaded two files to update bootloader and PDA to OK6 but i can only update the Bootloader but PDA Version does not change.
CP_N9005_OK6.tar.md5
BL_N9005_OK6.tar.md5
The first file is supposed to update the PDA or not?
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
Ah i see, thx for your help!
Hm so maybe it could be a good idea to install a untouched Stock Rom first and then go to modified image?
I have now installed N9005XXUGBOK6_N9005DBTGBOI1_DBT Stock Image with Odin.
When i want to go back to this image: http://forum.xda-developers.com/galaxy-note-3/development/rom-lp-tw-rom-t3027148 is it enought to just install it or do i need to wipe anything before?
I don't want all the samsung adware...
Oh it even killed the philz touch recovery...
kuitsu said:
CP is modem/baseband and it does not update PDA. AP is PDA. You can find complete firmwares from http://www.sammobile.com/. These packages contains all parts together and you can find installation instructions for example from https://www.youtube.com/watch?v=DdDgaqsYrRs.
Click to expand...
Click to collapse
how to flash only this PDA/AP & Bootloader via odin?
BL ver : A515FXXU3BTI2
AP Ver : A515FXXU3BTI2
Neither of those are for Note 3 based upon what you have posted .
BL in bl section AP in ap section on Odin .
Can someone tell me a safe way to make a firmware package?
The problem is it's for a firmware with no tar. It's for the N910P and I want QA1!
I was gonna flash PK1 then take ota to QA1. Then i was gonna use Flash Fire to backup the boot loader and modem files. To pack into a tar.
Is this a safe way to do this? Yes i know you have to pack it in certain order. My main concern is the proper way to pull the file! Thank you!
You can use SamFirm to download the newest firmware