Hi,
I tried to flash a stock firmware today using odin, however it failed. On my phone it says custom boot binary blocked by fap lock, but i am flashing stock firmware only. I have never rooted or unlocked the bootloader. Now my phone is stuck in the downloading mode. How do i fix this or successfully flash?
Regards,
I tried everything, now i get a secure lock error?
To recap, i have a g935w08 and i was trying to flash the BTU firmware (G935F) which i downloaded from samfirm, i used all the BL, AP, CP, CSC (used regular CSC) and it refuses to work. I am using odin 3.12.
Who can help me with this?
Try odin 3.11.1 as it says on the download page, failing that, try and flash your original firmware.
Instructions at the bottom of this download page: https://www.sammobile.com/firmwares/download/116121/G935FXXU1BPLB_G935FBTU1BPK3_BTU/
I gave up. Could it be due to the fact that i am trying to flash a G935F firmware onto G935W?
yes that's very possible, in your post above you said you have a G935F ?
"To recap, i have a g935F and i was trying to flash the BTU firmware"
@Seanie280672 I have updated it now. Does anyone know if this is possible?
Related
Hi,
I wanted to Root my S5, so i followed a tut with odin. Flashing did go wrong (failed in Odin) and now when i boot the device it says "Firmware update failed. Please use recovery in KIES".
Kies does not want to recover the device, for whatever reason. How can i get my phone back to a working state?
Grab a stock firmware (ROM) from sammobile, use ODIN to flash it
Need to create a free account on SM to download ROMs
*Detection* said:
Grab a stock firmware (ROM) from sammobile, use ODIN to flash it
Need to create a free account on SM to download ROMs
Click to expand...
Click to collapse
Isn't working Fails at the WRITE part for the system.img.ext4
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Ok so here's my issue
For a very long time since the G930U firmware was available to install, I've been using that. Well I decided to want to get my phone unlocked for GSM using those services but it needs Stock Firmware.
So I tried to restore to the latest G930P firmware and ODIN is giving a Volume size error for the system.img.ex4. I've tried now a couple different firmwares and no luck. Any idea?
The latest Firmware is PH7 I don't recommend it. PG1 on down are good to go. Extract zip stock firmware to a folder and add it in to Odin all the slots accordingly. BL AP CP CSC the last slot CSC is HOME_CSC not CSC_SPT and start flashing. It always works for me.
I ended up figuring it out. I had to find the stock G930P .PIT mapping's and re-partition because G930U ended up changing the sizes.
Oh good to know. Thank for sharing
Why do you not recommend PH7 update? I've heard it helps with battery life.
Could you share the pit file you used. I tried the same thing with a pit file i found online how ever since the pit i am able to flash bootloader but unable to flash system.ext4. Odin gives me a "failed (auth)" and neyjer the 930u version or the f2 or any of the other stock roms wont flash.... Help please
Don't you just love it when people "figure it out" and then don't share how? lol
Here... Since nobody gave you this. This may not be your problem.
https://drive.google.com/file/d/0BzyeAt2hy6XeenhWM2dNSU40TDA/view?usp=sharing
My device got FRP locked and so I used Odin to flash the official firmware from Sammobile and now I have T mobile menus like personal hotspot in my settings apps even though my device is the Wi-Fi only tab A 2016.
Here's how I got here:
I flashed the correct firmware, and in Odin I flashed the ap file, that's all. It succeeded but when installing updates, it said no command and went to the stock recovery. I factory wiped and rebooted.
How do I get rid of the T mobile menu's?
Any help would be appreciated
FIXED: Reflash in Odin with BL and CSC file
Same
I got the same problem, fixed it by flashing ap and csc
I live in the US and chose the XAR version from Frija
Now my lockscreen doesn't work, how do i fix it?
hello, please help me.
on my galaxy s3 neo(i9300i)
i have flash latest farmware from sammobile 1 file farmware( tar.md5) using odin, i have successfully flash stock farmware but not updated bootloder basbend version, i have tried 2times but no luck.
how can i do that?
try it like this: google the firmware with 4 files, ap, csc, bl, cp, for hard reset, install it with odin, after the first boot reinstall the latest firmware, I recommend the Greek one.
so I solved it