I am trying to unroot my phone. I have a US version of G930A. Sammobile has every county except the USA. I found G930AATT1APB5_User_Binary.zip which has AP_G930AUCU1APB5_CL7193387_QB8719495_REV02_user_low_ship_MULTI_CERT.tar, the BL, CP and CSC file in it. I try to flash it using Odin3, and I get an "odin protocol version error." I take it because the image is a lower version that's what's on there. I would like to download the latest stock image but sammobile doesn't offer images for the US? Or is there a better way?
Wrong forum. This here is for SM-G930F Development, not Q&A. You'll get the answers you're seeking and more, at the S7 AT&T Q&A and Dev forums. Mod, please move - thanks.
Wrong forum. But try using Kies in Download mode
That is what i do when ever i restore my phone.
No Kies good lord. This isn't a Note 2.
You're getting that error because you're on newer firmware than you're trying to flash so it's erroring out.
Follow the Return to stock procedure in this thread:
http://forum.xda-developers.com/ver...sed-unroot-t3411039/post67605246#post67605246
Flash all 4 files, then you'll be on PF2 and able to get the OTA Update to PG1 with wifi calling, etc.
I tried using kies. It asks me for my model. I put in SM-G930A. The serial I put in all caps and it tells me my model number I entered is wrong.
joe3681 said:
No Kies good lord. This isn't a Note 2.
You're getting that error because you're on newer firmware than you're trying to flash so it's erroring out.
Follow the Return to stock procedure in this thread:
http://forum.xda-developers.com/ver...sed-unroot-t3411039/post67605246#post67605246
Flash all 4 files, then you'll be on PF2 and able to get the OTA Update to PG1 with wifi calling, etc.
Click to expand...
Click to collapse
I tried the instructions at http://forum.xda-developers.com/veri...6#post67605246 and I get "FAIL! Model dismatch fail"
dorlow said:
I tried the instructions at http://forum.xda-developers.com/veri...6#post67605246 and I get "FAIL! Model dismatch fail"
Click to expand...
Click to collapse
Which Odin are you using?
You're flashing the PF2?
I've tried many versions of Odin v1 (not the 3). I'm not sure what the PF2 is.
To get it to work, I just defaulted the phone and rerooted it. It's the only way I can get it to work. It's working perfect right now. Only question is how long,
dorlow said:
I've tried many versions of Odin v1 (not the 3). I'm not sure what the PF2 is.
To get it to work, I just defaulted the phone and rerooted it. It's the only way I can get it to work. It's working perfect right now. Only question is how long,
Click to expand...
Click to collapse
for g930a (galaxy s7 at&t NOT EDGE)
WARNING: YOU WILL LOSE ALL DATA MAKE A BACKUP
download these files:
Odin: http://www.mediafire.com/download/2t...din_3.12.3.rar
Flashing Files: https://drive.google.com/file/d/0B17...w?usp=drivesdk
After downloading extract the .rar extract it then extract each, BL, AP, ect... files. Use the odin included in the download to flash and you will be returned to stock. If the odin included still gives you the error you can get the princecomsey version and see if that works from here: http://downloadandroidrom.com/file/tools/ODIN/ODIN-modified.zip
If odin freezes or crashes just restart it and try again, it might take a while foor the AP file to load into odin so just be patient and if it looks like it is about to crash wait about 2-3 minutes then force close it and try again.
Now you are returned to stock an all set !!
(p.s) - PF2 is the latest firmware as of now for the g930a, meaning when you flash this you will be all set. You may have tried to flash the original PF which is now outdated cause AT&T updated it, I did this and it worked but i could not update my phone so I flashed this one and it works perfectly and Samsung pay is up and running.
This is the latest OTA Update for all major carriers. THIS WILL UPDATE YOUR BOOTLOADER SO THERE IS NO GOING BACK! I'm downloading, uploading to my Google Drive and posting this here as reference.
And of course, after flashing this in Odin you can go to https://samsung.firmware.science and chose QK5 to whichever Oreo Beta is latest or you can enjoy having the latest flashable update.
LINK: https://drive.google.com/open?id=1x9-mYPbDKgsa4sS0bMdu9yfmczZywqM_
Uploaded. I already removed the .md5 off the end of the files, just extract and flash away
How do you go about flashing this? Flashing my S5 there was only one file and you loaded that into the AP slot in Odin. With the S8 software it looks like there are 5 separate files. Do you only flash the AP file or all of them? Also, I tried another firmware that was supposed to be Verizon firmwareand had some cricket and metropcs apps installed. Will this be the Verizon firmware that came with the phone from the factory or is it like the other firmware I downloaded and installed from Sammobile? Thanks for any help on this. Trying to get my phone back to how it was when I took it out of the box.
Hitchhiker90 said:
How do you go about flashing this? Flashing my S5 there was only one file and you loaded that into the AP slot in Odin. With the S8 software it looks like there are 5 separate files. Do you only flash the AP file or all of them? Also, I tried another firmware that was supposed to be Verizon firmwareand had some cricket and metropcs apps installed. Will this be the Verizon firmware that came with the phone from the factory or is it like the other firmware I downloaded and installed from Sammobile? Thanks for any help on this. Trying to get my phone back to how it was when I took it out of the box.
Click to expand...
Click to collapse
I Extracted and flashed AP, BL, CP and CSC. Verizon firmware.
The link you posted is dead. Have any other mirrors possibly?
Hello, I have recently installed Android 8.0 (Unofficial) on my S7 edge as mentioned in this thread by ProtoDeVNan0. And also installed TWRP recovery as explained here to upgrade it. After installation figured that it has some issues with some features.
So now I am trying to downgrade to the latest official firmware.
But every time I download and install the official firmware zip file using TWRP, it says the zip file is corrupt. So I tried downloading from different sources and still it says it is corrupt in TWRP.
And then I tried using Odin after extracting the Zip file. Using the tar.md5 files inside it. It fails as well.
And also found no way to install the official recovery.
Is there any way I can downgrade from 8.0 to official 7.0? And also I would like to remove TWRP and install official recovery. Basically returning it to its original state.
Searched a lot and found no possible ways to do so.
Please help. Thank you
SOLUTION:
I have found the solution to the issue.
I previously tried using odin to load all the packages in the zip file all together which was the reason i was getting the error.
The solution is to tick and select AP file only in odin and start.
(in case stuck at meta-data unplug)
Then reset odin and re-start the phone into download mode again.
Now tick and select the CSC file (not HOME_CSC), and then start.
After the phone reboots, a factory data reset will occur and phone boots up.
Why are you using TWRP to attempt to install Official samsung firmware?
You do it all through ODIN, it'll put your device back to basically original setup state with stock firmware. Flash with CSC and not home_CSC, I assume you have no data you will need to backup before hand.
More info here:
http://updato.com/how-to/how-to-install-an-official-samsung-stock-firmware-using-odin
Which Version you use odin? I try your solution but dont work on my g935f?
BL not downgraded!
khan0412 said:
Hello, I have recently installed Android 8.0 (Unofficial) on my S7 edge as mentioned in this thread by ProtoDeVNan0. And also installed TWRP recovery as explained here to upgrade it. After installation figured that it has some issues with some features.
So now I am trying to downgrade to the latest official firmware.
But every time I download and install the official firmware zip file using TWRP, it says the zip file is corrupt. So I tried downloading from different sources and still it says it is corrupt in TWRP.
And then I tried using Odin after extracting the Zip file. Using the tar.md5 files inside it. It fails as well.
And also found no way to install the official recovery.
Is there any way I can downgrade from 8.0 to official 7.0? And also I would like to remove TWRP and install official recovery. Basically returning it to its original state.
Searched a lot and found no possible ways to do so.
Please help. Thank you
SOLUTION:
I have found the solution to the issue.
I previously tried using odin to load all the packages in the zip file all together which was the reason i was getting the error.
The solution is to tick and select AP file only in odin and start.
(in case stuck at meta-data unplug)
Then reset odin and re-start the phone into download mode again.
Now tick and select the CSC file (not HOME_CSC), and then start.
After the phone reboots, a factory data reset will occur and phone boots up.
Click to expand...
Click to collapse
STILL NOT DOWNGRADED!!
You can apply the solution described above (using ODIN to flash AP, CP and CSC with a previous version of firmware). However, the Boot-loader will remain under the latest version (since January 2018 update).
The problem is drastically worst for those who used to patch certificates before the January 2018. For those users, I will advise to not install the update from January 2018 because, they will not find any tools currently available to patch certificates and get the phone work a new. They can try but it will not be successful and the phone will keep saying "Emergency call only" or "not registered on network".
Anyone having successful experience to inform others please!
Thank you.
M. T. Coulibaly
Yes it Solved. You Need to have Stock Firmware of March , and extract PIT File, then flash Firmware with PIT File.
In Options tab check "F. Reset Time", "Auto Reboot", "Nand Erase", "Re-Partition" and "Phone Bootloader Update". Rest options must be UNCHECKED!!!
If anyone need Firmware of March for G935F and the PIT , then let me know.
HELP Corrupt Zip Stock ROM TWRP
..
therealchris said:
..
Click to expand...
Click to collapse
You must Flash it with Odin, with PIT , you must do it how i sad it in my last Post. I Upload Firmware and PIT now to Mega.
Please, someone help me
Sorry if my english is not good, i'm confused where to go for help.
I also experienced the same problem. I just tried installing android 8.0 (from the same link and way as you explained) and it works. but after I tried several times, a lot of bug that makes me uncomfortable.
So I plan to restore it to the official/original firmware version as before. I've tried using odin and also the same as you experienced, always fail when installing BL. And AP, CP, CSC works well.
Then, what should i do?
Can someone please help explain to me more clearly? with more easily understood words. My English is not very good, I still have to use translator for sentences that I do not understand. I would appreciate your help.
Thank you
Help me
Serbian_Andro said:
Yes it Solved. You Need to have Stock Firmware of March , and extract PIT File, then flash Firmware with PIT File.
In Options tab check "F. Reset Time", "Auto Reboot", "Nand Erase", "Re-Partition" and "Phone Bootloader Update". Rest options must be UNCHECKED!!!
If anyone need Firmware of March for G935F and the PIT , then let me know.
Click to expand...
Click to collapse
Please, someone help me
Sorry if my english is not good, i'm confused where to go for help.
I also experienced the same problem. I just tried installing android 8.0 (from the same link and way as you explained) and it works. but after I tried several times, a lot of bug that makes me uncomfortable.
So I plan to restore it to the official/original firmware version as before. I've tried using odin and also the same as you experienced, always fail when installing BL. And AP, CP, CSC works well.
Then, what should i do?
Can someone please help explain to me more clearly? with more easily understood words. My English is not very good, I still have to use translator for sentences that I do not understand. I would appreciate your help.
Thank you
How to downgrade from Official Oreo to Nougat
khan0412 said:
Hello, I have recently installed Android 8.0 (Unofficial) on my S7 edge as mentioned in this thread by ProtoDeVNan0. And also installed TWRP recovery as explained here to upgrade it. After installation figured that it has some issues with some features.
So now I am trying to downgrade to the latest official firmware.
But every time I download and install the official firmware zip file using TWRP, it says the zip file is corrupt. So I tried downloading from different sources and still it says it is corrupt in TWRP.
And then I tried using Odin after extracting the Zip file. Using the tar.md5 files inside it. It fails as well.
And also found no way to install the official recovery.
Is there any way I can downgrade from 8.0 to official 7.0? And also I would like to remove TWRP and install official recovery. Basically returning it to its original state.
Searched a lot and found no possible ways to do so.
Please help. Thank you
SOLUTION:
I have found the solution to the issue.
I previously tried using odin to load all the packages in the zip file all together which was the reason i was getting the error.
The solution is to tick and select AP file only in odin and start.
(in case stuck at meta-data unplug)
Then reset odin and re-start the phone into download mode again.
Now tick and select the CSC file (not HOME_CSC), and then start.
After the phone reboots, a factory data reset will occur and phone boots up.
Click to expand...
Click to collapse
after trying for many days got this Solution.
The baseband should be same or higher of the firmware to downgrade.
Example: G935FXXU2DRAG Oreo
G935FXXU1DRAG Nougat ( will not happen.)
Both should be same I mean the U2 in the middle.
Or u can downgrade upgrade from U1 oero to U2 Naugat. But not from U2 to U1 Baseband.
Hope it helps.
Just download last nougat release and flash it using latest odin simply guys,
I have tested, no one needs to use pit file or nand erase etc. Use samfirm to download latest firmware for your model. Then use latest odin to flash. Be sure to use normal csc file, NOT the home csc. You don't need pit file when using normal csc, its included with it.
If you used twrp recovery etc to flash unofficial oreo releases, you need to first confirm if oem unlock is enabled, don't tick on auto reboot option, just tick F.reset from odin options, then first flash latest nougat for your region through odin, then flash twrp through odin. Then when odin says pass, force reboot into twrp recovery from download mode, then format data in twrp and flash super SU/magisk and no verity opt encrypt. Then reboot and you will be good.
Sent from my S7 Edge using XDA Labs
Serbian_Andro said:
Yes it Solved. You Need to have Stock Firmware of March , and extract PIT File, then flash Firmware with PIT File.
In Options tab check "F. Reset Time", "Auto Reboot", "Nand Erase", "Re-Partition" and "Phone Bootloader Update". Rest options must be UNCHECKED!!!
If anyone need Firmware of March for G935F and the PIT , then let me know.
Click to expand...
Click to collapse
I need the link for march firmware please. Thanks a lot
can't downgrade
odin gives "FAIL" when starting the procedure.
i have the U1 nougat version and the U2 oreo version.
can't seem to find U2 nougat ( if any) and I guess upon upgrading to OREO sonething had changed and can't downgrade anymore.
I managed to get into android recovery and did a factory reset and total wipe but nothing, through ODIN flashing doesn't work.
Any ideas anybody ? I really want to downgrade so I will be able to install stock nougat, and flash an oreo custom ROM with magisk in order to get around the KNOX triger thing.
tks
doron
doronwin said:
odin gives "FAIL" when starting the procedure.
i have the U1 nougat version and the U2 oreo version.
can't seem to find U2 nougat ( if any) and I guess upon upgrading to OREO sonething had changed and can't downgrade anymore.
I managed to get into android recovery and did a factory reset and total wipe but nothing, through ODIN flashing doesn't work.
Any ideas anybody ? I really want to downgrade so I will be able to install stock nougat, and flash an oreo custom ROM with magisk in order to get around the KNOX triger thing.
tks
doron
Click to expand...
Click to collapse
You can't flash U1 nougat on U2 oreo firmware. It has been all over xda that U2 firmwares has Version 2 bootloader which can't be downgraded to Version 1 bootloader of U1 firmwares. Nougat has many U2 firmwares, you simply need to search..
Sent from my S7 Edge using XDA Labs
bluetooth start works but need switch off battery optimization
Hello everyone
I found it!!!
Problem with your bluetooh connection after upgrade can be solved in one of the way follow previous post or "disable battery optimization.
I try before swichng off and on all networks, emergency mode etc. and nothing happen.
Disable battery optimization
Sometimes battery optimization also messes up with Bluetooth connections. I suggest you check battery optimization settings and remove Bluetooth from it. To do so, follow the steps:
Open device Settings and go to Battery. There is few ways to go there:
first can be: open settings go to "device maintenance">>>clik on "battery">>>clik on "batterry usage">>>clik on 3 dots right top corner>>>then clik "optimise battery usage">>> and u are there - swich off “Bluetooth MIDI service” and apps that you use with Bluetooth such as Play Music, Phone, youtube, maps etc.
2nd
open settings Tap the 3-dot menu present at the top right corner and select “Battery Optimization”.
Turn off Battery Optimization for “Bluetooth MIDI service” and the apps that you use with Bluetooth such as Play Music, Phone, youtube, maps etc.
therealchris said:
..
Click to expand...
Click to collapse
Serbian_Andro said:
Yes it Solved. You Need to have Stock Firmware of March , and extract PIT File, then flash Firmware with PIT File.
In Options tab check "F. Reset Time", "Auto Reboot", "Nand Erase", "Re-Partition" and "Phone Bootloader Update". Rest options must be UNCHECKED!!!
If anyone need Firmware of March for G935F and the PIT , then let me know.
Click to expand...
Click to collapse
hello...have problem to downgrade from u3 to u2 ...can you help me please ??
Downgrading from U3 Oreo to Naugat
justmemike said:
hello...have problem to downgrade from u3 to u2 ...can you help me please ??
Click to expand...
Click to collapse
Hello. I 've read all the topics and youtube comments about downgrading from oreo.
My oreo is U3,and everyone know that nougat is U2.
So that means we can't downgrade from u3 oreo to nougat u2.
Anyone if knows something,please,pleeeease tell me.
I really need nougat...
nar3k said:
Hello. I 've read all the topics and youtube comments about downgrading from oreo.
My oreo is U3,and everyone know that nougat is U2.
So that means we can't downgrade from u3 oreo to nougat u2.
Anyone if knows something,please,pleeeease tell me.
I really need nougat...
Click to expand...
Click to collapse
I think i've already tried anything to make downgrading possible but no luck,
Serbian_Andro said:
Yes it Solved. You Need to have Stock Firmware of March , and extract PIT File, then flash Firmware with PIT File.
In Options tab check "F. Reset Time", "Auto Reboot", "Nand Erase", "Re-Partition" and "Phone Bootloader Update". Rest options must be UNCHECKED!!!
If anyone need Firmware of March for G935F and the PIT , then let me know.
Click to expand...
Click to collapse
--------------------
My Samsung S7 edge upgraded to Oreo with Binary U3. I would like to downgrade to Nougat. If your PIT file can help me with this then please share with me.
awaism81 said:
--------------------
My Samsung S7 edge upgraded to Oreo with Binary U3. I would like to downgrade to Nougat. If your PIT file can help me with this then please share with me.
Click to expand...
Click to collapse
it ain't possible man, I've already tried that
Hi,
I cant seem to find anything related directly to the S8 and not sure if all mobiles are the same..
I had Android 8 on my S8 and needed to downgrade to 7 to try something, I did that but after it completed I had a messy settings menu where parts were duplicated or showing the wrong sub-heading.
I've read on the forums about this and it says re-flash with CSC and AP to fix.
When I try to re-flash it gets stuck on "Set Partition" in Odin.
I read to fix this you need to enable the "re-partition" option in Odin, I have tried this and it still does not work.
I have also tried full flash or AP, CSC, BL and CP and it's still getting stuck.
Tried on two different PC's (just in case) - same result on both.
The phone still boots and works, but it feels like something is wrong.
Can someone advise on how to completely re-flash the phone? The videos I've watched so far don't seem to run into this issue.
Any help would be awesome
Update: Using odin 3.13 gives this error: <ID:0/005> Can't open the specified file. (Line: 1892)
I've tried it with SamFirm and Sammobile FW.
EDIT - Finally fixed it, flashed G950FXXU1AQDG to the handset, wiping and re-partitioning the phone, after setup an OTA update was pushed for 8.0.
In case anyone else has the same issue, I used Sammobile for the FW and Odin 3.12 to flash.
hello, not exactly a n00b, but definitely with this phone.
Long story short, tried to root with Odin using apparently depreciated instructions. Odin halted after wiping my NAND, leaving me with a softbricked phone.
I need help restoring the phone to factory. I have expierienced fail auth and sha256 errors trying do restore.
Which of the dozens of flavors of odin , and which FW do I need to get this back to work? I forgot to mention the carrier is AT&T. So my boot loader is locked.
TY
use prince comsy odin
https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U1/ATT/
Clarification
Is U1 FW the same as for SM-G950U? Just want to clarify before I attempt to flash again. and ty for your reply
Restore worked beautifully, however cosmey errored out and I had to use the PatcheD version of odin to complete. Can someone point me to a guide for rooting the U1 oreo pls?
mpogue1975 said:
Is U1 FW the same as for SM-G950U? Just want to clarify before I attempt to flash again. and ty for your reply
Click to expand...
Click to collapse
U 1 can be flashed but you just want the regular U firmware.
Make sure it is the correct bootloader version as what the device is on now or higher. As downgrading is not possible and also throws a fail auth error.
Also use regular Odin 3.13.1 for stock firmwares. Not comsey,that is for modded firmware and such
mpogue1975 said:
Restore worked beautifully, however cosmey errored out and I had to use the PatcheD version of odin to complete. Can someone point me to a guide for rooting the U1 oreo pls?
Click to expand...
Click to collapse
Yea here's the kicker. Oreo can't be rooted and u1 isn't rooted only rooted is part cyborg rom. Which is U Firmware Also if your bootloader is to high. 3 or higher no downgrade no root
I think we have had quite a mix up or misunderstanding here...The link in #2 points to ATT SM-G950U1 FW. I looked all over the sammobile site and was not able to find any ATT FW for the 950U, only the U1. Also, I was told in #2 to use prince cosmey so I tried. I ran cosmey as admin loaded the 4 Files, left the options on default, and it errored out. So I tried standard odin with default options, it errored out as well. Finally, I used the PatcheD odin 3b and it worked flawlessly. My only question now, can someone link me to a working root method for the 950U/U1
for the snapdragon version of the s8 by at&t? I have tried several, but odin and/or the device always throws an error. I am on the verge of giving up. TY very much for all your help up to this point, I could not have gotten my phone back to working order without your help.
I think we have had quite a mix up or misunderstanding here...The link in #2 points to ATT SM-G950U1 FW. I looked all over the sammobile site and was not able to find any ATT FW for the 950U, only the U1. Also, I was told in #2 to use prince cosmey so I tried. I ran cosmey as admin loaded the 4 Files, left the options on default, and it errored out. So I tried standard odin with default options, it errored out as well. Finally, I used the PatcheD odin 3b and it worked flawlessly. My only question now, can someone link me to a working root method for the 950U/U1
for the snapdragon version of the s8 by at&t? I have tried several, but odin and/or the device always throws an error. I am on the verge of giving up. TY very much for all your help up to this point, I could not have gotten my phone back to working order without your help.