This is the brief history of the mysterious case of my phone: a Redmi note 3 pro oficially unlocked bootloader.
The first ROM that I flashed was the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo)
The phone was a delight with this ROM; a rocket. And so I had it several months.
One day I see that there is a new ROM with very good appearance and assessments; and installed [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo].
Another super ROM, like a rocket. I had it a couple of months and, as it had no support for 4G, I decide to return to the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo). I had a backup, fortunately.
I install the backup of the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and... everything works well, except SIM. I do not have telephone connection.
I install it from zero and... everything works well, except SIM. I do not have telephone connection.
Of course, when installing the [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo], I had to install CM13 Radio. That must have deleted the baseband to AOSP 5.1.
No problem.
I flash a ROM MIUI to get the baseband of android 5.1 y...Boootloop.
The phone enters bootloop and does not pass the logo of MIUI.
I have tried everything what I have found in this forum and in that of MIUI to recover the phone.
In the end, the phone was a brick with the logo of miui on my desktop.
I remember my only backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and everything works again. Reset to factory data from ROM retrieved from the backup and...everything works well, less the SIM. I do not have telephone connection.
No matter which ROM I install, everything works fine, less the SIM. With the exception of the MIUI ROMs, with those remains in bootloop in the logo.
My phone works but only with the backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo).
Any idea?... any advice?...i do not know what to do...
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
micro77 said:
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
Click to expand...
Click to collapse
Thank you for the advice. It is not mi case. I can use edl correctly. I made several tryes from edl.
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
micro77 said:
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Click to expand...
Click to collapse
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
H4T3M4CH1N3 said:
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
Click to expand...
Click to collapse
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Flash, then put the device in Flashboot mode, then use the MiUnlock tool. It should boot.
Eyaculé este post en tu cara usando mi Ericsson T28
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
muadsoft said:
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Click to expand...
Click to collapse
Did u try install MIUI ROM 5.1.1 after flash unlock again.
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
I am going to try it. Do you have some manual o explication about the process of qpst? . I have been looking for informartion in google but i am not sure about to know how to do it. Thanks.
1yang said:
Did u try install MIUI ROM 5.1.1 after flash unlock again.
Click to expand...
Click to collapse
Yes, many times with the same result. All MIUI Roms, fastboot or recovery, stays in bootloop in logo. The phone has the unlocked bootloader.
muadsoft said:
I am going to try it. Thanks.
Yes, many times with the same result. All MIUI Roms, fastboot or recobery, stays in bootloop in logo. The phone has the unlocked bootloader.
Click to expand...
Click to collapse
Sometimes my phone got relock bootloader after install MIUI ROM and stays in bootloop MIUI, go to fastboot cek use fastboot OEM device-info, if u get
[bootloader] device unlock : false try unlock via miunlock again
That's why I'm afraid to flash CM radios... I prefer to stay in 5.1. 1 aosp rom.. Thanks for sharing your experience
Enviado desde xiaomi Redmi note 3 pro
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
Click to expand...
Click to collapse
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
muadsoft said:
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
Click to expand...
Click to collapse
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
micro77 said:
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
Click to expand...
Click to collapse
I have been doing tests while you were answering.
Bootloader always unlocked.
Clean Flash of rom aosp 5.1: all ok.
I believe that the solution has been to use these drivers that are in the folder of the first ROM: QDLoader HS-USB Driver_64bit_Setup
The phone was recognized with other drivers before.
@micro77, thank you very much for all. I had spent many hours trying so many things. Even, I dismounted the telephone.
Thank you again.
Hello all,
I have a big problem.
I just recover back my phone to stock firmware using QFIL.
And now i dont have IMEI number, WiFi not working. There is no mobile signal too.
Anybody know, how to fix this problem ?
toonypl said:
Hello all,
I have a big problem.
I just recover back my phone to stock firmware using QFIL.
And now i dont have IMEI number, WiFi not working. There is no mobile signal too.
Anybody know, how to fix this problem ?
Click to expand...
Click to collapse
Which firmware file (version) did you use to revert it back ? S143, S288? VIBE? ROW?
Did you use a separated modem file?
Lenovo vibe z2 china version (not pro) restart floop and no imei
Hi i have a lenovo vibe z2 china version not pro , is stuck on restarting , i did wipe data and format many times an one time it worked but i had no imei. 0 imei on sim1 , 0 imei on sim 2, i don't find an official china firmware to flash on it to see if it will work. Any ideeas? Is not pro version.
https://www.dropbox.com/sh/o14o2cvxm7slbfb/AACnG9V7jjqeBlp-jnOehocIa?dl=0
Please download and replace this CN Modem file NON-HLOS.bin to the one in your ROM.
not sure if that compatible with you non Pro, this is from my CN Mobile Z2 Pro
toonypl said:
Hello all,
I have a big problem.
I just recover back my phone to stock firmware using QFIL.
And now i dont have IMEI number, WiFi not working. There is no mobile signal too.
Anybody know, how to fix this problem ?
Click to expand...
Click to collapse
download the file i shared earlier on NON-HLOS.bin and replace it with the copy in your stock firmware and QFIL again, that's what I did earlier on to regain my mobile signal.
Hi all!
So, I was trying to install a new system on this phone because I hate the original. I unlocked the bootloader, installed TWRP, rooted the device, and then created a backup of the stock ROM via TWRP. And then tried to flash a custom ROM. My problem is that I completely forgot to create a scatter file of the phone. And the ROM didn't work and when I boot the phone, it starts a bootloop.
Can someone please give me a scatter file for the CUN-L01 (or some other that may work with this model)?
EDIT: Forgot to say that the chipset is the MT6735P, and by the way this is the european version.
Thanks in advance!
busca en needrom
sesmar695 said:
busca en needrom
Click to expand...
Click to collapse
Thanks for the idea but I had already tried it and didn't find anything there.
I updated the eui from 5.8.19s to 5.9.028s but now I cannot give any app permissions and cannot use any gapps and full of ads can u give a proper solution or to downgrade without root...
Hoping for the reply and solution...
it is very easy to flash rom to older version....
cgigate said:
it is very easy to flash rom to older version....
Click to expand...
Click to collapse
How can I flash the ROM I have not rooted my mobile....
donaldj5 said:
How can I flash the ROM I have not rooted my mobile....
Click to expand...
Click to collapse
flash phone never needs "root";
get in recovery mode to flash the flash zip file
read the stick https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
I Need LeEco le S3 X626 Stock Rom USA Qualcomm version
I soft bricked boot looped my LeEco le S3 X626 USA (Qualcomm) phone. All I need is the stock recovery. I think that would be 5.8.021s or 5.8.20s or maybe even 5.8.018s might work. I've looked and looked for 2 days and haven't found an active stock download link for LeEco le s3 x626 USA version with qualcomm snapdragon hardware. Please Please can someone help. Thanks in advance.
Hi! I have a ze520kl in 900e mode... there is a solution for this problem? :crying:
Relssek said:
Hi! I have a ze520kl in 900e mode... there is a solution for this problem? :crying:
Click to expand...
Click to collapse
You bricked your phone .
I have QFIL Files to unbrick your phone.
Contact me via Telegram
MOD EDIT: LINK REMOVED
The distribution of social media links is no longer allowed on XDA. Please refer to the thread linked below:
Telegram and Whatsapp Channels - Going Forward
Bro i have i recovered the phone and lost imei ç_ç I have all data, my phone is original ç_ç can you help me?:crying::crying::crying:
Contact me for facebook please...
Relssek said:
Bro i have i recovered the phone and lost imei ç_ç I have all data, my phone is original ç_ç can you help me?:crying::crying::crying:
Contact me for facebook please...
Click to expand...
Click to collapse
What firmware are you running on?
ZenFone_3 said:
What firmware are you running on?
Click to expand...
Click to collapse
I have currently ww_14.2020.1711.81_20171216 Nougat ... I have also tried other versions but nothing ç_ç I need the qcn files maybe
Relssek said:
I have currently ww_14.2020.1711.81_20171216 Nougat ... I have also tried other versions but nothing ç_ç I need the qcn files maybe
Click to expand...
Click to collapse
Go HERE.
You can find all RAW, CSC, QFIL, EMMC ( QCN ) firmwares for ze520kl.
Hit the thanks button if i helped.
Eng.Raman said:
Go HERE.
You can find all RAW, CSC, QFIL, EMMC ( QCN ) firmwares for ze520kl.
Hit the thanks button if i helped.
Click to expand...
Click to collapse
Bro how to flash qcn firmware? This firmware is .bin... Emmc box? I don't have Emmc box... >.<