This is the brief history of the mysterious case of my phone: a Redmi note 3 pro oficially unlocked bootloader.
The first ROM that I flashed was the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo)
The phone was a delight with this ROM; a rocket. And so I had it several months.
One day I see that there is a new ROM with very good appearance and assessments; and installed [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo].
Another super ROM, like a rocket. I had it a couple of months and, as it had no support for 4G, I decide to return to the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo). I had a backup, fortunately.
I install the backup of the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and... everything works well, except SIM. I do not have telephone connection.
I install it from zero and... everything works well, except SIM. I do not have telephone connection.
Of course, when installing the [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo], I had to install CM13 Radio. That must have deleted the baseband to AOSP 5.1.
No problem.
I flash a ROM MIUI to get the baseband of android 5.1 y...Boootloop.
The phone enters bootloop and does not pass the logo of MIUI.
I have tried everything what I have found in this forum and in that of MIUI to recover the phone.
In the end, the phone was a brick with the logo of miui on my desktop.
I remember my only backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and everything works again. Reset to factory data from ROM retrieved from the backup and...everything works well, less the SIM. I do not have telephone connection.
No matter which ROM I install, everything works fine, less the SIM. With the exception of the MIUI ROMs, with those remains in bootloop in the logo.
My phone works but only with the backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo).
Any idea?... any advice?...i do not know what to do...
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
micro77 said:
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
Click to expand...
Click to collapse
Thank you for the advice. It is not mi case. I can use edl correctly. I made several tryes from edl.
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
micro77 said:
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Click to expand...
Click to collapse
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
H4T3M4CH1N3 said:
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
Click to expand...
Click to collapse
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Flash, then put the device in Flashboot mode, then use the MiUnlock tool. It should boot.
Eyaculé este post en tu cara usando mi Ericsson T28
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
muadsoft said:
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Click to expand...
Click to collapse
Did u try install MIUI ROM 5.1.1 after flash unlock again.
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
I am going to try it. Do you have some manual o explication about the process of qpst? . I have been looking for informartion in google but i am not sure about to know how to do it. Thanks.
1yang said:
Did u try install MIUI ROM 5.1.1 after flash unlock again.
Click to expand...
Click to collapse
Yes, many times with the same result. All MIUI Roms, fastboot or recovery, stays in bootloop in logo. The phone has the unlocked bootloader.
muadsoft said:
I am going to try it. Thanks.
Yes, many times with the same result. All MIUI Roms, fastboot or recobery, stays in bootloop in logo. The phone has the unlocked bootloader.
Click to expand...
Click to collapse
Sometimes my phone got relock bootloader after install MIUI ROM and stays in bootloop MIUI, go to fastboot cek use fastboot OEM device-info, if u get
[bootloader] device unlock : false try unlock via miunlock again
That's why I'm afraid to flash CM radios... I prefer to stay in 5.1. 1 aosp rom.. Thanks for sharing your experience
Enviado desde xiaomi Redmi note 3 pro
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
Click to expand...
Click to collapse
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
muadsoft said:
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
Click to expand...
Click to collapse
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
micro77 said:
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
Click to expand...
Click to collapse
I have been doing tests while you were answering.
Bootloader always unlocked.
Clean Flash of rom aosp 5.1: all ok.
I believe that the solution has been to use these drivers that are in the folder of the first ROM: QDLoader HS-USB Driver_64bit_Setup
The phone was recognized with other drivers before.
@micro77, thank you very much for all. I had spent many hours trying so many things. Even, I dismounted the telephone.
Thank you again.
Related
Hello all!
I am reaching the end of my rope with this particular issue. First of all, I have the American Blu Life Pure XL 32GB edition. I was able to root it just fine and flashed Candar's, Nori's, and the various stock ROM's successfully with no issues using the TWRP recovery. Then, I saw that Nori had released a new version which I obtained from here. Upon doing so, I booted into a ROM that would not connect to my home wifi or my cell network. I quickly rebooted thinking that would solve the problem. Instead I got stuck in a boot loop that I have yet to recover from. I have tried everything I could think of:
Restoring my stock TWRP backup
Restoring the CWM backup of Nori's old ROM
Restoring the stock India GiONEE ROM
Re-flashing every one of the above ROM's
Firmware flashing using the brush pack/flash tools from here
Still the issue remains, even after using the brush pack. The only thing that Nori's new ROM does differently is flash some different firmware, so that is likely where the problem lies. Does anyone have any ideas on where I should go from here?
I think the problem is modem.img file system, I have seen that talk about this forum Blu Xl Pure Life.
I think you should replace this file by the Stock Rom for Blue life pure Xl .
Enviado desde mi E7
hackvier1 said:
I think the problem is modem.img file system, I have seen that talk about this forum Blu Xl Pure Life.
I think you should replace this file by the Stock Rom for Blue life pure Xl .
Enviado desde mi E7
Click to expand...
Click to collapse
Yes, I believe the issue is in the modem as well. The backup I made using TWRP doesn't have that file directly available, though. Do you have access to the file or know someone who may have a complete copy of the Blu LPXL firmware?
OMG
librophagus said:
Hello all!
I am reaching the end of my rope with this particular issue. First of all, I have the American Blu Life Pure XL 32GB edition. I was able to root it just fine and flashed Candar's, Nori's, and the various stock ROM's successfully with no issues using the TWRP recovery. Then, I saw that Nori had released a new version which I obtained from here. Upon doing so, I booted into a ROM that would not connect to my home wifi or my cell network. I quickly rebooted thinking that would solve the problem. Instead I got stuck in a boot loop that I have yet to recover from. I have tried everything I could think of:
Restoring my stock TWRP backup
Restoring the CWM backup of Nori's old ROM
Restoring the stock India GiONEE ROM
Re-flashing every one of the above ROM's
Firmware flashing using the brush pack/flash tools from here
Still the issue remains, even after using the brush pack. The only thing that Nori's new ROM does differently is flash some different firmware, so that is likely where the problem lies. Does anyone have any ideas on where I should go from here?
Click to expand...
Click to collapse
Man i have exactly same problem i too try uptade like u and nothing happends, i too installed norios room on my blu life xl (32GB)
tell me dude, u solve it ?
can u helpme ?
https://mega.co.nz/#!dAUhWKxY!-FiyE008SZpvudS5PTwvdcgNsj_0GtaCNcjl2KklGUk
But I think I have the same problem with the file modem.img ...
Link to BluLife community Google+!
hackvier1 said:
https://mega.co.nz/#!dAUhWKxY!-FiyE008SZpvudS5PTwvdcgNsj_0GtaCNcjl2KklGUk
But I think I have the same problem with the file modem.img ...
Link to BluLife community Google+!
Click to expand...
Click to collapse
i installed everythings room stock,custom room, backup, and nothing work :/
i dont know how fix it :/
i have same problem my phone infinty boot. Battery drained %0 and i use my charge cable = my phone open. My battery %100 i remove charge cable and phone again infinity boot 7-8 hour later battery %0 :/ again i use charge cable = phone open :/
i installed stock rom custom rom still same problem :S
sorry my poor english :d
Turkish:Beyler Türk varsa bi yardımcı olsun yav :/
I really think there should be a thread on XDA with tested methods to switch baseband as a lot of people face trouble with GPS etc on custom ROMs. Ideally we should be having a collection of TWRP flashable zips instead of having to install stock firmware via tools like Miflash and then doing everything from the beginning.
This zip from Davideavinavil is TWRP flashable and it works perfectly for me. It doesn't improve things drastically from stock Marshmallow Indian ZUI baseband but would be great for if your GPS is not working or something.
To get the baseband from latest Indian ZUI Nougat Beta follow these instructions from zukfans by Magz Heaven. Tested on my own phone which previously had the above Davideavinavil zip flashed and is now on M8996FAAAANAZM-1.76387.1.92759.1. I wiped everything TWRP then flashed this in fastboot and then went back into recovery and flashed ROM + GApps. If you want to run this in Linux open the bat file as text and use the same fastboot commands with those files in your pwd.
1. Will bootloader be locked again after flashing baseband?
2. Do I have to flash ROM after flashing baseband?
3. Does bluetooth connectivity depend on baseband?
Thx
edimonoarfa said:
1. Will bootloader be locked again after flashing baseband?
2. Do I have to flash ROM after flashing baseband?
3. Does bluetooth connectivity depend on baseband?
Thx
Click to expand...
Click to collapse
I also would like to know this... Also does it matter if my phone was from China rather than India for the baseband? Someone please help with these answers
__ganeshanand said:
To get the baseband from latest Indian ZUI Nougat Beta follow these instructions from zukfans by Magz Heaven. Tested on my own phone which previously had the above Davideavinavil zip flashed and is now on M8996FAAAANAZM-1.76387.1.92759.1. I wiped everything TWRP then flashed this in fastboot and then went back into recovery and flashed ROM + GApps. If you want to run this in Linux open the bat file as text and use the same fastboot commands with those files in your pwd.
Click to expand...
Click to collapse
Any idea man?
1qazwsx4 said:
I also would like to know this... Also does it matter if my phone was from China rather than India for the baseband? Someone please help with these answers
Click to expand...
Click to collapse
1. Yes its possible that your bootloader gets locked after flashing. If you do it wrong and doesnt check it after first reboot you can brick your device.
2. No you dont.
3. Someone said when you only flash the NON-HELOS.bin file you can get problems with bluetooth. If its right I dont know.
Danoz88 said:
1. Yes its possible that your bootloader gets locked after flashing. If you do it wrong and doesnt check it after first reboot you can brick your device.
2. No you dont.
3. Someone said when you only flash the NON-HELOS.bin file you can get problems with bluetooth. If its right I dont know.
Click to expand...
Click to collapse
Thanks for your response. Only reason i asked about bluetooth is because only ONE custom rom works for me bluetooth wise. I'm unable to connect to my cars headunit with any rom except resurrection rom. Would flashing a modem help this? my modem is 9-00026-M8996FAAAANAZM-1.63821.1
1qazwsx4 said:
Thanks for your response. Only reason i asked about bluetooth is because only ONE custom rom works for me bluetooth wise. I'm unable to connect to my cars headunit with any rom except resurrection rom. Would flashing a modem help this? my modem is 9-00026-M8996FAAAANAZM-1.63821.1
Click to expand...
Click to collapse
Flashing custom roms shouldnt change the baseband. Does connecting work on rr with this baseband? Do you have problems with other bluetooth devices except your car?
Danoz88 said:
Flashing custom roms shouldnt change the baseband. Does connecting work on rr with this baseband? Do you have problems with other bluetooth devices except your car?
Click to expand...
Click to collapse
Sorry I probably didn't explain that the best. Flashing ROMs doesn't change my baseband but I'm wondering if changing my baseband will fix my Bluetooth problems. Yes RR works with my current baseband and my Bluetooth works with every device I've tried, on flashing to a different ROM none have worked sadly. I've tried to ask around if other people have issues but they all say their BT is working as it should haha
__ganeshanand said:
I really think there should be a thread on XDA with tested methods to switch baseband as a lot of people face trouble with GPS etc on custom ROMs. Ideally we should be having a collection of TWRP flashable zips instead of having to install stock firmware via tools like Miflash and then doing everything from the beginning.
This zip from Davideavinavil is TWRP flashable and it works perfectly for me. It doesn't improve things drastically from stock Marshmallow Indian ZUI baseband but would be great for if your GPS is not working or something.
Click to expand...
Click to collapse
I flashed this zip onto my z2 plus and the phone has stopped completely. Its not booting nor am i able to go to recovery.
It flashes ZUK message and then goes silent completely.
Have i bricked the phone? Can i recover it?
Thanks
Will this baseband work for the UK? Sorry if this a silly question
ramadurair said:
I flashed this zip onto my z2 plus and the phone has stopped completely. Its not booting nor am i able to go to recovery.
It flashes ZUK message and then goes silent completely.
Have i bricked the phone? Can i recover it?
Thanks
Click to expand...
Click to collapse
same here. damit
Hello all :good: I am Back with an awesome guide
This is the most required guide for every Meizu Device user
This is for those who have hardbricked or bootlooped (with locked bootloader) And missing recovery. In there device while trying anything (including roms etc) :crying:
This guide is not like i am giving you flash tools to flash your phone Because in our case it is not possible with SP Flash tools (Due To Locked Bootloader) :crying:
In this guide I will inform you how you can get your bricked device back Not free you have to pay for it
Requirements :good:
1)Meizu M2/Mini{Meilan2} (those are different names of our device in different countries)
2)Some Money According to indian Currency its max 250rs or 300rs max (well some guys can ask you for more its your luck)
3)Firmware to flash your phone (See Down For Links)
4)Little Brain
Lets Start
Download Meizu M2/Mini Flash Frimware From Here :fingers-crossed:
Links are not valid anymore
You have to find a Mobile repairer Guy Who uses tools Like MRT Dongle,UFI Android Toolbox,Chiness Phone Flash Tools.Etc
In Short Tools That Can Bypass Meizu Security (Lock On Bootloader) There are Plenty of Tools that can do same
Just go to shop ask them to fix your phone if they say you need to change hardware tell them to try with those toolbox of android it will bypass security lock of Meizu and will flash the phone
It will be costly to buy them Sinle MRT Dongle Cost (3000 rs or more or less) so it is easy to repair them from professionals just explain them what is the problem and they will fix it (Most of meizu Custtomer Care Center loots the people by Chaning EMMC (Mother Board) of there phone Unless there is no need to do that
Sharing Personal Experience :good:
Even I had bricked my phone once i went to service centre (I Was Noob that time) they flashed my phone (with official tools and files) and in just 5 minutes my phone came back to alive :victory:
Every service centre guy is not same mostly in Indonesia i had seen many post regarding this issue they just change EMMC and charge big amount of it (nearly half of the phone cost) phone cost 6999rs price of changing EMMC 3000rs :crying:
This Guide Is Applicable for All Meizu Devices Find a device specific frimware or PM me i will help you to find a flash file for you which will fix your problem :good:
Note:A Guy Named Nguyễn Th
where is the guide?
maXDAmn said:
where is the guide?
Click to expand...
Click to collapse
up ?
gialaivn said:
prices: 10$-15$
work via teamviewer
email: [email protected]
fb.com/thanhdatPD
Click to expand...
Click to collapse
:3 lol 15×64=960rs
i still say my guide is better option ? can be done under 400,500 why waste more :v
gialaivn said:
:3
I begin work.
If more people, prices will decrease.
It is still a better solution than replacing emmc
:laugh::laugh::laugh:
Click to expand...
Click to collapse
looks like that you own that tools right?
wew *__*
:3 wew kul *___*
gialaivn said:
Mrt dongle ???
Click to expand...
Click to collapse
i still think that will not work :| because physical hardware is not present :v
I have the same problem... Can you fix it?
I confirm!
The man is a magician (or a professional ).
My device was in Hard Brick and Nguyễn Thành Đạt managed to save it.
I think he deserves to be paid for the work he did. The price he charges is relatively cheap in comparison to others.
Just one more thing:
Before I had a Hard Brick, my system version was: Flyme *.*.*.*G (Global).
Nguyễn Thành Đạt installed me the version: Flyme 5.1.7.0Y (Chinese).
So now I need to Unlock Bootloader & Install Twrp And Flash the Global version.
Let him know what system version you want - Maybe he could install it for you.
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
ChakibDEV said:
How do you know you bricked it? The tutorial above is for phones with locked bootloader, since you have TWRP already yours is unlocked. Try reflashing recovery via fastboot (try stock here's a link https://drive.google.com/file/d/0B0ix4bkQ8JjAdzBVZW1ZcmlSNjg/view?usp=sharing) then flash flyme
Click to expand...
Click to collapse
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Happy you solved your problem. I flashed flyme using both TWRP and stock recovery and the bootloader's still unlocked.
Mathvediz said:
i bricked my phone by installing stock rom (flyme os) in twrp is any other way to recover it?
Click to expand...
Click to collapse
same here what to do?
i need firmware but download link is not working please help me
my device is bricked i need sp tool firmware please help
lyfhckr said:
my device is bricked i need sp tool firmware please help
Click to expand...
Click to collapse
You can't get it here dude.
Dwnld it from here.
http://www.softpedia.com/dyn-postdownload.php/6b986d7c8ddf22446036468c5cb3fa6c/5a0181bf/39687/0/1
Mathvediz said:
Yes i know it is bricked because nothing happen when i press power button, pwr+volume down (fastboot), pwr+up (recovery).
But i already solve the problem by flashing temp_unlock_secro.img and flashing stock flyme 4 with option format all + download, thank you for your help.
I think flashing flyme will lock the bootloader again, but im not sure im still newbs.
Click to expand...
Click to collapse
Hey man, just wanna ask how did you flash this temp_unlock_secro.img.. And where did you get it??
Pretty good!
Hi i have bought a Redmi note 7 from Lazada PH it is a chine rom version 6GB RAM/64GB ROM. Today as i finally unlocked the bootloader i decided to change my ROM into Global ROM, I get an error on TWRP something like "Zip Treble Compatibility Error" i have red from the forum to update my TWRP so i downloaded https://sourceforge.net/projects/cheeseburgerdumplings/ but when i flash it using the same install method and rebooted my phone i cant access the TWRP anymore and its stuck in redmi logo. all i can access now is fastboot... please help me im literally crying now,... :crying::crying::crying:
marlon256 said:
Hi i have bought a Redmi note 7 from Lazada PH it is a chine rom version 6GB RAM/64GB ROM. Today as i finally unlocked the bootloader i decided to change my ROM into Global ROM, I get an error on TWRP something like "Zip Treble Compatibility Error" i have red from the forum to update my TWRP so i downloaded https://sourceforge.net/projects/cheeseburgerdumplings/ but when i flash it using the same install method and rebooted my phone i cant access the TWRP anymore and its stuck in redmi logo. all i can access now is fastboot... please help me im literally crying now,... :crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the stock rom using adb
Here's the link to the rom
http://www.miui.com/getrom.php?r=356&m=yes&app=false
Thanks, as of now i have installed a custom rom.. do you have an idea how to fix the find device has stopped when i install miui rom?
marlon256 said:
Hi i have bought a Redmi note 7 from Lazada PH it is a chine rom version 6GB RAM/64GB ROM. Today as i finally unlocked the bootloader i decided to change my ROM into Global ROM, I get an error on TWRP something like "Zip Treble Compatibility Error" i have red from the forum to update my TWRP so i downloaded https://sourceforge.net/projects/cheeseburgerdumplings/ but when i flash it using the same install method and rebooted my phone i cant access the TWRP anymore and its stuck in redmi logo. all i can access now is fastboot... please help me im literally crying now,... :crying::crying::crying:
Click to expand...
Click to collapse
boss san ka bumili? sa official xiaomi store ba sa lazada?
aron11195 said:
boss san ka bumili? sa official xiaomi store ba sa lazada?
Click to expand...
Click to collapse
English please. This forum is not only for the specific country.
Hi i successfully flashed a Global ROM using Xiaomi flashing software. Thanks God. I had no luck using TWRP for flashing original ROM because it end up stuck on a setup screen because of find device has closed issue. Thank you everyone for helping me out ??
Hi all,
I have ordered a Xiaomi Redmi Note 7 128gb.
In the description of this section is the Info, there is only a 32gb and a 64gb Version of this Phone. Does the Roms and TWRP work with the 128gb version too?
I ordered here: https://www.ebay.de/itm/Xiaomi-Redm...hash=item5d87e41195:m:mnXTK9QqBL5-gxmHyy9jb3g
Thanks and have a nice day.
IMHO.. As long as your phone code name "Lavender" then its works and youre welcome to try.
Yes it will.
Yes , mine also 128gb
Cant flash custom ROM on same device
Hi, I seem to be unable to flash a custom ROM, I have the same version and I get an Error 7 when I flash any ROM , but It only happens in the part that flash Vendor files. Someone had that problem? How did you fixed it?
f4cu.3s said:
Hi, I seem to be unable to flash a custom ROM, I have the same version and I get an Error 7 when I flash any ROM , but It only happens in the part that flash Vendor files. Someone had that problem? How did you fixed it?
Click to expand...
Click to collapse
Have you installed the latest global firmware 10.3.6? If not try to install it restart to recovery and flash the rom
darhma said:
Have you installed the latest global firmware 10.3.6? If not try to install it restart to recovery and flash the rom
Click to expand...
Click to collapse
Yes I have, oddly with it it looses baseband I had to restore modem from a backup, I checked my device in Xiaomi page and it's listed has the Global International version so I dont't know why the fastboot global rom that I flashed made my phone loose that. I have MIUI Global 10.3.6.0 (PFGMIXM).
All is working as it should after restoring the modem data.
Flash orange recovery and try again ... If this doesn't work, download the Rom again and try it.
I have the same device as you and I have tried Havoc OS, miui.eu (both stable and beta) and MiuiMix without any problem... ?