Database Users

Any Information About ZTE BLADE L3 Roms, recovery

Hi everyone.
I need help with this phone. I´m looking for the Chilean Version Rom, cause i installed one from colombia and the SIM bay has been Blocked Permanently.
And second, i installed a Custom recovery and now i dont have recovery.
(Sorry about my english)
Thank you all of you
Edit: After a long time searching information finally i flashed the device with SP Flash Tools but now y can´t see the screen, It shows just stripes.

redmi 2 prime 2014818 kitkat firmware

can any one plz upload kitkat firmware of redmi 2 prime indian model. i am not getting mobile signal

but can pass the link where to download

Global fastboot http://bigota.d.miui.com/V7.1.1.0.K...ICK_20151209.0000.6_4.4_global_a49c63ee30.tgz
recovery rom http://bigota.d.miui.com/V7.1.1.0.KHJMICK/miui_HM2XWCGlobal_V7.1.1.0.KHJMICK_836456cd08_4.4.zip

GeorZ said:
Global fastboot http://bigota.d.miui.com/V7.1.1.0.K...ICK_20151209.0000.6_4.4_global_a49c63ee30.tgz
recovery rom http://bigota.d.miui.com/V7.1.1.0.KHJMICK/miui_HM2XWCGlobal_V7.1.1.0.KHJMICK_836456cd08_4.4.zip
Click to expand...
Click to collapse
after flashing this lp, mm roms working fine but in kk roms network signal problem both sims shows empty

MIUI forum
potlapalli1 said:
after flashing this lp, mm roms working fine but in kk roms network signal problem both sims shows empty
Click to expand...
Click to collapse
file a bug report @ MiUI forum

maybe your device is from china unicom, like me,,
try flash this rom dude, but this is not a global rom, this is china rom, but stable,,,
Recovery Mode : http://bigota.d.miui.com/V7.1.2.0.KHJCNCK/miui_HM2XTD_V7.1.2.0.KHJCNCK_c6d7b658e6_4.4.zip
Fastboot Mode : http://bigota.d.miui.com/V7.1.2.0.K...KHJCNCK_20151209.0000.6_4.4_cn_3df2accecd.tgz

Bricked Phone, a very mysterious case...

This is the brief history of the mysterious case of my phone: a Redmi note 3 pro oficially unlocked bootloader.
The first ROM that I flashed was the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo)
The phone was a delight with this ROM; a rocket. And so I had it several months.
One day I see that there is a new ROM with very good appearance and assessments; and installed [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo].
Another super ROM, like a rocket. I had it a couple of months and, as it had no support for 4G, I decide to return to the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo). I had a backup, fortunately.
I install the backup of the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and... everything works well, except SIM. I do not have telephone connection.
I install it from zero and... everything works well, except SIM. I do not have telephone connection.
Of course, when installing the [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo], I had to install CM13 Radio. That must have deleted the baseband to AOSP 5.1.
No problem.
I flash a ROM MIUI to get the baseband of android 5.1 y...Boootloop.
The phone enters bootloop and does not pass the logo of MIUI.
I have tried everything what I have found in this forum and in that of MIUI to recover the phone.
In the end, the phone was a brick with the logo of miui on my desktop.
I remember my only backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and everything works again. Reset to factory data from ROM retrieved from the backup and...everything works well, less the SIM. I do not have telephone connection.
No matter which ROM I install, everything works fine, less the SIM. With the exception of the MIUI ROMs, with those remains in bootloop in the logo.
My phone works but only with the backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo).
Any idea?... any advice?...i do not know what to do...

hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928

micro77 said:
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
Click to expand...
Click to collapse
Thank you for the advice. It is not mi case. I can use edl correctly. I made several tryes from edl.

ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?

Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28

micro77 said:
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Click to expand...
Click to collapse
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
H4T3M4CH1N3 said:
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
Click to expand...
Click to collapse
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.

Flash, then put the device in Flashboot mode, then use the MiUnlock tool. It should boot.
Eyaculé este post en tu cara usando mi Ericsson T28

no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz

muadsoft said:
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Click to expand...
Click to collapse
Did u try install MIUI ROM 5.1.1 after flash unlock again.

micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
I am going to try it. Do you have some manual o explication about the process of qpst? . I have been looking for informartion in google but i am not sure about to know how to do it. Thanks.
1yang said:
Did u try install MIUI ROM 5.1.1 after flash unlock again.
Click to expand...
Click to collapse
Yes, many times with the same result. All MIUI Roms, fastboot or recovery, stays in bootloop in logo. The phone has the unlocked bootloader.

muadsoft said:
I am going to try it. Thanks.
Yes, many times with the same result. All MIUI Roms, fastboot or recobery, stays in bootloop in logo. The phone has the unlocked bootloader.
Click to expand...
Click to collapse
Sometimes my phone got relock bootloader after install MIUI ROM and stays in bootloop MIUI, go to fastboot cek use fastboot OEM device-info, if u get
[bootloader] device unlock : false try unlock via miunlock again

That's why I'm afraid to flash CM radios... I prefer to stay in 5.1. 1 aosp rom.. Thanks for sharing your experience
Enviado desde xiaomi Redmi note 3 pro

@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
Click to expand...
Click to collapse
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse

muadsoft said:
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
Click to expand...
Click to collapse
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .

micro77 said:
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
Click to expand...
Click to collapse
I have been doing tests while you were answering.
Bootloader always unlocked.
Clean Flash of rom aosp 5.1: all ok.
I believe that the solution has been to use these drivers that are in the folder of the first ROM: QDLoader HS-USB Driver_64bit_Setup
The phone was recognized with other drivers before.
@micro77, thank you very much for all. I had spent many hours trying so many things. Even, I dismounted the telephone.
Thank you again.

N9005 doesn't work with custom roms?

Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!

Boot to download mode and check the model first .
Is this a used phone ??

Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.

Can it be that the internal memory size is causing the issue? is the only difference....can someone help?

Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.

before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.

Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.

hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS

adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also

Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp

adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .

use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x

golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom

Does any other rom install ??

JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM

adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing

fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)

Redmi Note 7 128gb

Hi all,
I have ordered a Xiaomi Redmi Note 7 128gb.
In the description of this section is the Info, there is only a 32gb and a 64gb Version of this Phone. Does the Roms and TWRP work with the 128gb version too?
I ordered here: https://www.ebay.de/itm/Xiaomi-Redm...hash=item5d87e41195:m:mnXTK9QqBL5-gxmHyy9jb3g
Thanks and have a nice day.

IMHO.. As long as your phone code name "Lavender" then its works and youre welcome to try.

Yes it will.

Yes , mine also 128gb

Cant flash custom ROM on same device
Hi, I seem to be unable to flash a custom ROM, I have the same version and I get an Error 7 when I flash any ROM , but It only happens in the part that flash Vendor files. Someone had that problem? How did you fixed it?

f4cu.3s said:
Hi, I seem to be unable to flash a custom ROM, I have the same version and I get an Error 7 when I flash any ROM , but It only happens in the part that flash Vendor files. Someone had that problem? How did you fixed it?
Click to expand...
Click to collapse
Have you installed the latest global firmware 10.3.6? If not try to install it restart to recovery and flash the rom

darhma said:
Have you installed the latest global firmware 10.3.6? If not try to install it restart to recovery and flash the rom
Click to expand...
Click to collapse
Yes I have, oddly with it it looses baseband I had to restore modem from a backup, I checked my device in Xiaomi page and it's listed has the Global International version so I dont't know why the fastboot global rom that I flashed made my phone loose that. I have MIUI Global 10.3.6.0 (PFGMIXM).
All is working as it should after restoring the modem data.

Flash orange recovery and try again ... If this doesn't work, download the Rom again and try it.
I have the same device as you and I have tried Havoc OS, miui.eu (both stable and beta) and MiuiMix without any problem... ?