Related
Hi All,
Firstly SORRY for posting here. This should be in the dev thread, but I have no rights there.
I am unable to post to post in the developer thread (being newly registered) and I am hoping Chainfire can provide a root for the Galaxy Note 4 SM-N9100 China model. He has requested that the recovery.img file from the phone model's stock ROM be attached. He has already provided the root for a few other files but I see in another post, he didn't do it for this one because he couldn't download the firmware easily. I have downloaded the stock firmware and extracted the needed file.
If someone with dev posting rights can help post the attached file to this thread:
http://forum.xda-developers.com/showthread.php?t=1980683&page=55
I would be super super appreciative :fingers-crossed:
Many thanks.
For thanks in advance to Chainfire, I have just made a donation.....
.... now praying.... can't use my apps purchased on Google Play on this phone without the root.
http://download.chainfire.eu/564/CF-Root1/CF-Auto-Root-trltechn-trlteduoszc-smn9100.zip
thanks chainfire!
tried it on mine but it didn't work. had a flash write failure...
Maybe Locked Bootloader
First, big thanks to Chainfire for the super fast action!!
But yeah, I've got the same issue. The recovery.img was from sammobile for n9100, so I don't think that is the problem.
I am suspecting it is a locked bootloader. Unfortunately I'm not at the moment able to detect this as while adb is working fine, fastboot is not recognizing the device. If anyone else knows how to easily check if the bootloader is locked (and has a good way to unlock without using fastboot), everything would be great.
Fastboot not supported for n9100
Ok tried fastboot on a different PC. Doesn't work for n9100 either. Can't detect devices in bootloader mode. Adb is ok. So likely not usb issue, must be simply not available on n9100 and from searching about seems Samsung likely doesn't support fastboot for many devices.
Troubleshooting
After further research, not too sure about the bootloader being the issue. Actually the SM-N9100 is not carrier branded or locked that I could tell. If the other models' roots work, then it makes no sense for this to be the issue here.
Chainfire, I see you posted that you may replace the ROOT you made for this model. If it helps in troubleshooting, here is what happened.
1 - Downloaded the stock firmware from here: http://www.sammobile.com/firmwares/3/?download=36308
2 - Posted to you the recovery.img file from the ROM - not sure if that was the one you used. But after soft bricking my device by trying the root, I can confirm that I could reflash with the stock firmware and all went well.
3 - When trying the root, it starts no problem, but then there is a Write Fail error in Odin. If needed, I can repeat the process to provide all text and screenshots. There was no Red Android icon. The bootloader screen has some failure message and the Android icon remained green.
4 - Phone would not restart stating there was a firmware issue and that I should perform a recovery in Kies.
5 - I did not perform a recovery in Kies, but rather I reflashed (using Odin) the stock firmware. This worked ok.... but of course, I still have no root. Since the reflash worked, then I can only assume the recovery.img file is fine for my SM-N9100
I have used your Autoroot in the past for my Note 2 N7100 model, and it worked with absolutely no issue whatsoever. So I don't think the problem is that I am not following the Odin settings correctly or that I have some USB issue.
Thanks.
Further Details
I've added a screenshot of the Odin failure.
BTW, I noticed someone posted a rooting video in YouTube with this CF AutoRoot for N9100
http://www.youtube.com/watch?v=mXpPSjlzrok
Funny the video stops right before the failure and you don't see the "PASS" result in Odin!
So I don't know if anyone has been successful with this root at all!
sm-n9100
Hi
I rooted my SAMSUNG GT-N9100 with Cf-Auto root via Odin everything was ok process was passed and phone took a restart i checked the apps there was superSU but when i opened it, it just waiting and happened nothing. I restart my phone in recovery mode to update gapps or other superSu upte it giving a write error. it was not rooted you can't do anything.
since you buy N9100, so i consider u can read a few chinese (if not u can use google translate to help u)
i've seen in chinese forums they can root N9100 without problems, so i give u a few links to help
here is the step by step for root :
http://www.muzisoft.com/root/80910.html
and
in here it said u need to flash cwm first..this is the link for recovery
http://www.muzisoft.com/recovery/80827.html
and then after that u need to put supersu.zip to ur sd card, so this is the link for the supersu.zip
http://www.muzisoft.com/softs/bixu/80821.html
hope this can help root ur device
or actually u can download root apps in chinese, there are a few root apps that u can use for root the phone
Looks like the 9100 just got the recent OTA yesterday.
I'm rooted so need the full Odin flashable ANK5 from sammobile:
http://www.sammobile.com/firmwares/download/39658/N9100ZCU1ANK5_N9100CHC1ANK5_CHC.zip/
Sent from my SM-N9100
Keep getting status 3 errors with chinese CWM.
Does any one know how to get twrp installed on sm-n9100.
Root for Galaxy Note 4 Dual (Honk Kong model) N9100ZHU1BOC4 - lollipop 5.0.1
I was hoping someone with Developmet skills could help me with making a rooting file for me.
Chainfire asks for the recovery.img from the ROM. so I attacvhed it to the post. Since he has made a lot of CF auto root files available, but unfortunatly mine is not listed yet.
It the Galaxy note 4 dual sim HK version N9100ZHU1BOC4, i m running it under lollipop 5.0.1 .
I need root to recover deleted :crying: pictures.
I made a donation as well .
Thank you for your kind help.
babelina said:
I was hoping someone with Developmet skills could help me with making a rooting file for me.
Chainfire asks for the recovery.img from the ROM. so I attacvhed it to the post. Since he has made a lot of CF auto root files available, but unfortunatly mine is not listed yet.
It the Galaxy note 4 dual sim HK version N9100ZHU1BOC4, i m running it under lollipop 5.0.1 .
I need root to recover deleted :crying: pictures.
I made a donation as well .
Thank you for your kind help.
Click to expand...
Click to collapse
Cf auto root works for my N9100...
Just flash it via Odin
Or either flash cmw recovery and it will ask you upon first reboot is you want to install su.
Both work for me
Envoyé de mon SM-N9100 en utilisant Tapatalk
kokabunga said:
Cf auto root works for my N9100...
Just flash it via Odin
Or either flash cmw recovery and it will ask you upon first reboot is you want to install su.
Both work for me
Envoyé de mon SM-N9100 en utilisant Tapatalk
Click to expand...
Click to collapse
Hi,
thanks for your prompt response.
Which file have you used to flash/root ? Could you post the link or send me through PM please ?
(There is also a thread about TWRP Philz touch 6 , that apparently works to for rooting but does not allow any custom ROM )
Sent from my SM-N9100 using XDA Free mobile app
thanks i tried the 4.4.4 file on my N9100 5.01 and it worked as well!
cheers.
aliguu said:
thanks i tried the 4.4.4 file on my N9100 5.01 and it worked as well!
cheers.
Click to expand...
Click to collapse
Hi Aligu,
Thank you for your help :good: . Have you also tried to flash a custom ROM into your Dual sim N9100 ?
Does the root method for n9100 china version also works on hong Kong version without any problems.
This is the brief history of the mysterious case of my phone: a Redmi note 3 pro oficially unlocked bootloader.
The first ROM that I flashed was the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo)
The phone was a delight with this ROM; a rocket. And so I had it several months.
One day I see that there is a new ROM with very good appearance and assessments; and installed [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo].
Another super ROM, like a rocket. I had it a couple of months and, as it had no support for 4G, I decide to return to the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo). I had a backup, fortunately.
I install the backup of the AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and... everything works well, except SIM. I do not have telephone connection.
I install it from zero and... everything works well, except SIM. I do not have telephone connection.
Of course, when installing the [ROM][Slim][6.0.1][AOSP_r61][Slim 6 For Kenzo], I had to install CM13 Radio. That must have deleted the baseband to AOSP 5.1.
No problem.
I flash a ROM MIUI to get the baseband of android 5.1 y...Boootloop.
The phone enters bootloop and does not pass the logo of MIUI.
I have tried everything what I have found in this forum and in that of MIUI to recover the phone.
In the end, the phone was a brick with the logo of miui on my desktop.
I remember my only backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo) and everything works again. Reset to factory data from ROM retrieved from the backup and...everything works well, less the SIM. I do not have telephone connection.
No matter which ROM I install, everything works fine, less the SIM. With the exception of the MIUI ROMs, with those remains in bootloop in the logo.
My phone works but only with the backup of AOSP 5.1.1 for Xiaomi Redmi Note 3 (kenzo).
Any idea?... any advice?...i do not know what to do...
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
micro77 said:
hi
you can unbrick this methode ;
http://forum.xda-developers.com/redmi-note-3/how-to/unbrick-rn3-hs-usb-900e-edl-cable-100-t3447928
Click to expand...
Click to collapse
Thank you for the advice. It is not mi case. I can use edl correctly. I made several tryes from edl.
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
micro77 said:
ok.
your phone works well ,but no radio singal right ?
no baseband ?
no imei ?
Click to expand...
Click to collapse
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
H4T3M4CH1N3 said:
Any EFS backups available? I'd start from there, another option is flashing through EDL mode the stock MIUI ROM. That should restore the device's functionality.
Eyaculé este post en tu cara usando mi Ericsson T28
Click to expand...
Click to collapse
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Flash, then put the device in Flashboot mode, then use the MiUnlock tool. It should boot.
Eyaculé este post en tu cara usando mi Ericsson T28
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
muadsoft said:
From mu backup in aosp5.1, there is radio signal, baseband and imeis. From other roms, no radio signal, no baseband. MIUI ROM just bootloops in logo.
Yes, EFS backups available. flashing through EDL mode the stock MIUI ROM can be done but just bootloops in logo.
Click to expand...
Click to collapse
Did u try install MIUI ROM 5.1.1 after flash unlock again.
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
I am going to try it. Do you have some manual o explication about the process of qpst? . I have been looking for informartion in google but i am not sure about to know how to do it. Thanks.
1yang said:
Did u try install MIUI ROM 5.1.1 after flash unlock again.
Click to expand...
Click to collapse
Yes, many times with the same result. All MIUI Roms, fastboot or recovery, stays in bootloop in logo. The phone has the unlocked bootloader.
muadsoft said:
I am going to try it. Thanks.
Yes, many times with the same result. All MIUI Roms, fastboot or recobery, stays in bootloop in logo. The phone has the unlocked bootloader.
Click to expand...
Click to collapse
Sometimes my phone got relock bootloader after install MIUI ROM and stays in bootloop MIUI, go to fastboot cek use fastboot OEM device-info, if u get
[bootloader] device unlock : false try unlock via miunlock again
That's why I'm afraid to flash CM radios... I prefer to stay in 5.1. 1 aosp rom.. Thanks for sharing your experience
Enviado desde xiaomi Redmi note 3 pro
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
micro77 said:
no need EFS backup
flash this rom ;
https://docs.google.com/uc?id=0B4oUiKSTOb7oYjNpeEtLLUlSNXc&export=download
with mi flash ;
mi flash 64 bit :
https://drive.google.com/open?id=0B4oUiKSTOb7oSEtmMEI1cWtFbWs
but choose flash.all ok?
http://i.hizliresim.com/A3gPbL.jpg
Click to expand...
Click to collapse
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
then restore this qcn your phone with qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oQ01UUG9QdFlHMTA
qpst ;
https://drive.google.com/open?id=0B4oUiKSTOb7oSG8zRWVwWkNwS2c
after all you can install miui global rom if you need ;
http://bigota.d.miui.com/V7.3.7.0.L...DD_20160523.0000.23_5.1_global_f5889c1549.tgz
Click to expand...
Click to collapse
muadsoft said:
@micro77, I am so happy. Mi phone boots normally again and all thanks to you.
I have done this:
I have a question, and before I make mistakes, I want to ask you. If my phone reboots normally, is it necessary to continue with this step?
Click to expand...
Click to collapse
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
micro77 said:
good to hear that
no no
ıf your phone is normally now not necessary this steps...
this steps only necessary if phone is no imei ,no baseband .
Click to expand...
Click to collapse
I have been doing tests while you were answering.
Bootloader always unlocked.
Clean Flash of rom aosp 5.1: all ok.
I believe that the solution has been to use these drivers that are in the folder of the first ROM: QDLoader HS-USB Driver_64bit_Setup
The phone was recognized with other drivers before.
@micro77, thank you very much for all. I had spent many hours trying so many things. Even, I dismounted the telephone.
Thank you again.
Hello, I konw that the question has already been asked, still I did not find any solution so far. I updated my phone to A2017GV1.2.0B02. My phone is a Chinese model. Therefore I assume it's a bootstack problem. Still I did not find which bootstack or modem I had to flash... Thanks for your help
evenshop said:
Hello, I konw that the question has already been asked, still I did not find any solution so far. I updated my phone to A2017GV1.2.0B02. My phone is a Chinese model. Therefore I assume it's a bootstack problem. Still I did not find which bootstack or modem I had to flash... Thanks for your help
Click to expand...
Click to collapse
It always better to convert it to A2017U model as more support and clear guides are available. However, did you back up your modem and boot files and installed after changing the model if Stock Rock.
If LOs or RR, did u flash specific model und universal bootloader?
Thanks for your answer. I don't have any modem or boot files back up. Yes, I flashed universal bootloader but for the moment I have found the right files to flash and make my phone work again. What can I do ?
I updated the eui from 5.8.19s to 5.9.028s but now I cannot give any app permissions and cannot use any gapps and full of ads can u give a proper solution or to downgrade without root...
Hoping for the reply and solution...
it is very easy to flash rom to older version....
cgigate said:
it is very easy to flash rom to older version....
Click to expand...
Click to collapse
How can I flash the ROM I have not rooted my mobile....
donaldj5 said:
How can I flash the ROM I have not rooted my mobile....
Click to expand...
Click to collapse
flash phone never needs "root";
get in recovery mode to flash the flash zip file
read the stick https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
I Need LeEco le S3 X626 Stock Rom USA Qualcomm version
I soft bricked boot looped my LeEco le S3 X626 USA (Qualcomm) phone. All I need is the stock recovery. I think that would be 5.8.021s or 5.8.20s or maybe even 5.8.018s might work. I've looked and looked for 2 days and haven't found an active stock download link for LeEco le s3 x626 USA version with qualcomm snapdragon hardware. Please Please can someone help. Thanks in advance.
Hi i have bought a Redmi note 7 from Lazada PH it is a chine rom version 6GB RAM/64GB ROM. Today as i finally unlocked the bootloader i decided to change my ROM into Global ROM, I get an error on TWRP something like "Zip Treble Compatibility Error" i have red from the forum to update my TWRP so i downloaded https://sourceforge.net/projects/cheeseburgerdumplings/ but when i flash it using the same install method and rebooted my phone i cant access the TWRP anymore and its stuck in redmi logo. all i can access now is fastboot... please help me im literally crying now,... :crying::crying::crying:
marlon256 said:
Hi i have bought a Redmi note 7 from Lazada PH it is a chine rom version 6GB RAM/64GB ROM. Today as i finally unlocked the bootloader i decided to change my ROM into Global ROM, I get an error on TWRP something like "Zip Treble Compatibility Error" i have red from the forum to update my TWRP so i downloaded https://sourceforge.net/projects/cheeseburgerdumplings/ but when i flash it using the same install method and rebooted my phone i cant access the TWRP anymore and its stuck in redmi logo. all i can access now is fastboot... please help me im literally crying now,... :crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the stock rom using adb
Here's the link to the rom
http://www.miui.com/getrom.php?r=356&m=yes&app=false
Thanks, as of now i have installed a custom rom.. do you have an idea how to fix the find device has stopped when i install miui rom?
marlon256 said:
Hi i have bought a Redmi note 7 from Lazada PH it is a chine rom version 6GB RAM/64GB ROM. Today as i finally unlocked the bootloader i decided to change my ROM into Global ROM, I get an error on TWRP something like "Zip Treble Compatibility Error" i have red from the forum to update my TWRP so i downloaded https://sourceforge.net/projects/cheeseburgerdumplings/ but when i flash it using the same install method and rebooted my phone i cant access the TWRP anymore and its stuck in redmi logo. all i can access now is fastboot... please help me im literally crying now,... :crying::crying::crying:
Click to expand...
Click to collapse
boss san ka bumili? sa official xiaomi store ba sa lazada?
aron11195 said:
boss san ka bumili? sa official xiaomi store ba sa lazada?
Click to expand...
Click to collapse
English please. This forum is not only for the specific country.
Hi i successfully flashed a Global ROM using Xiaomi flashing software. Thanks God. I had no luck using TWRP for flashing original ROM because it end up stuck on a setup screen because of find device has closed issue. Thank you everyone for helping me out ??