Hello everyone!
A friend of mine's phone got a system update, but something went wrong and now when the phone starts, it tries to install the update and then boots into recovery mode. I don't want to try and do a factory reset yet, because she had some important notes on SMemo which I want to retrieve with ADB. Problem is that I can't get ADB to see the phone. Can you help me out?
Thanks in advance!
Related
Hi guys
I`ve got a major Problem Here. Please help!!
Me and a friend wanted to update my rooted Galaxy s4 from The unofficial to the official Kitkat Firmware. But The update failed. We tried again but still no succes. I didnt have enough space on my SD card. So I did a factory reset, installed twrp and let Odin install a small custom Rom. Odin succesfully installed it but Then I got stuck in The Boot screen. Probably I didnt turn on USB debugging
After days of surching The web I found out that I could change The rights for USB debugging over ADB tool. But i get stuck on The <su> command after entering <ADB shell>. The command cant be executed or something like that.
I then noticed that the root had gone with the factory reset. I installed that and now my PC (adb) wont recognize the phone anymore.
What should I do? Im still quite a noob so please dont critizise me if I missed something obvious.
Should I use ADB or is there a better sollution?
Please please help.
Hope that theres a sollution.
Keep posting
illias9 said:
Hi guys
I`ve got a major Problem Here. Please help!!
Me and a friend wanted to update my rooted Galaxy s4 from The unofficial to the official Kitkat Firmware. But The update failed. We tried again but still no succes. I didnt have enough space on my SD card. So I did a factory reset, installed twrp and let Odin install a small custom Rom. Odin succesfully installed it but Then I got stuck in The Boot screen. Probably I didnt turn on USB debugging
After days of surching The web I found out that I could change The rights for USB debugging over ADB tool. But i get stuck on The <su> command after entering <ADB shell>. The command cant be executed or something like that.
I then noticed that the root had gone with the factory reset. I installed that and now my PC (adb) wont recognize the phone anymore.
What should I do? Im still quite a noob so please dont critizise me if I missed something obvious.
Should I use ADB or is there a better sollution?
Please please help.
Hope that theres a sollution.
Keep posting
Click to expand...
Click to collapse
Do you have a custom recovery? Try to install it. I recommend CWM 6.0.4.6.
Later that, flash any flashable rom(remeber: correct model). Later flashing, reboot.
Hi,
yesterday I got d802 phone to fix it. First the phone was stuck at LG screen with certification error which I fixed. Phone was recognized by PC and i installed twrp on phone. I tried everything (i guess) and now phone is stuck at LG screen and it doesnt move. Now i cannot go back to twrp recovery but i can get to download mode but phone isn't recognized by pc so i cannot flash kdz file to phone. I'm really stuck at this point. Is this real hard brick or is there any way to fix it? Any ideas what should i do or something i can try?
I tried to plug phone in other computers and it's the same thing. My laptop recognized that something is plugged in once but it didn't know what was it so by now. Somehow from time to time phone doesn't go to download mode but it goes in hardware key control mode.
Hope someone can help...
So far i manged to get to recovery mode but adb sideload isn't working. I tried to wipe everything and that didn't help. As we speak factory reset is in progress but I think it's stuck on formatting cache. I hope I'll be able to get the phone recognized in download mode. Any suggestions are appreciated
I have made some progress. ADB is working now and i pushed cyanogenmod and on installation it says that it cannot mount data and cache. I think that main problem is that phone isn't rooted and now I'm trying to root phone via adb. If someone knows anyway to do this that would be great
My Yotaphone C9660 is stuck on the Boot Screen and this persists every time I try to restart the phone. I'm assuming it's soft bricked. Though there's a lot of information on how to resolve this for Yotaphone 2, I couldn't find anything for C9660 and neither CWM or TWRP support. Even if there's no way I can get my phone to start up again, any solutions/software helpful in retrieving my data would be of great use. Any help would be highly, highly welcome! Thanks a lot!
Hi, I am facing the same problem. I connected it to a Windows computer and tried 'adb reboot recovery'. It still didn't take me to the stock recovery. I will share with you if a find a fix.
Cheers.
Hi all,
I have a problem, my phone does not start.
*It loads normally
*I can access the System Recovery / Custom OS
I have tried to:
*wipe cache partition
*load dr.fone and access phone
pc connects but problem is USB debugging not enabled
another thing is that dr. fone does not support my model/build
I am a newbie / amateur to this kind of stuff, but I´m willing to try if it is possible to get my personal info out before going for factory reset.
Can anybody help me with this? What could be the problem behind this? Would it help to try to load an alternative OS through SD to get the phone live again? Does that wipe the memory too?
Is it possible to access memory without debugging enabled? I tried to launch ADB platform for WIN, but encountered problems. "adbwinapi.dll not found" or similar...
Please help, tomorrow is monday and I´ve got to work and without a phone I have serious problems.
Thanks in advance!
Kristian / FI
Have you try to flash the firmware with ODIN?
As you mention you can access recovery and wiped your phone
Try to get correct firmware for your device and flash it with ODIN(You have to enter download mode)
If this help you, press Thanks button!
Hi there, I´m newbie, I tried something and made a mistake. I´m asking for someone to help, because I don´t know way out.
My system is win10 and LG G2 D802 with kitkat. I tried to install lineageOs16 with the help of "https://wiki.lineageos.org/devices/d802/install". I got pretty far, rooted the device and transmitted with adb "lineage-16.0-20200220-recovery-d802.img.". I do not know why, but then I was unable to put the device into recovery mode. So the error happened: I switched off USB debugging. When I got into recovery mode, I did system wipe. Now the device hangs in recovery mode from LineageOS 16.0 and I can't get out. I can only switch off the device. What can I do to activate the device again? Because I'm a beginner, I don't even have an idea in which direction to go or where to get help.
I would be grateful for any information or help
Thanks