[Q] I9505 stuck on Boot screen after failed update - Galaxy S 4 Q&A, Help & Troubleshooting

Hi guys
I`ve got a major Problem Here. Please help!!
Me and a friend wanted to update my rooted Galaxy s4 from The unofficial to the official Kitkat Firmware. But The update failed. We tried again but still no succes. I didnt have enough space on my SD card. So I did a factory reset, installed twrp and let Odin install a small custom Rom. Odin succesfully installed it but Then I got stuck in The Boot screen. Probably I didnt turn on USB debugging
After days of surching The web I found out that I could change The rights for USB debugging over ADB tool. But i get stuck on The <su> command after entering <ADB shell>. The command cant be executed or something like that.
I then noticed that the root had gone with the factory reset. I installed that and now my PC (adb) wont recognize the phone anymore.
What should I do? Im still quite a noob so please dont critizise me if I missed something obvious.
Should I use ADB or is there a better sollution?
Please please help.
Hope that theres a sollution.
Keep posting

illias9 said:
Hi guys
I`ve got a major Problem Here. Please help!!
Me and a friend wanted to update my rooted Galaxy s4 from The unofficial to the official Kitkat Firmware. But The update failed. We tried again but still no succes. I didnt have enough space on my SD card. So I did a factory reset, installed twrp and let Odin install a small custom Rom. Odin succesfully installed it but Then I got stuck in The Boot screen. Probably I didnt turn on USB debugging
After days of surching The web I found out that I could change The rights for USB debugging over ADB tool. But i get stuck on The <su> command after entering <ADB shell>. The command cant be executed or something like that.
I then noticed that the root had gone with the factory reset. I installed that and now my PC (adb) wont recognize the phone anymore.
What should I do? Im still quite a noob so please dont critizise me if I missed something obvious.
Should I use ADB or is there a better sollution?
Please please help.
Hope that theres a sollution.
Keep posting
Click to expand...
Click to collapse
Do you have a custom recovery? Try to install it. I recommend CWM 6.0.4.6.
Later that, flash any flashable rom(remeber: correct model). Later flashing, reboot.

Related

Help to Unbrick Kinpad i600 7'

Hi guys, I have one Kinpad i600, and last week try update, using
wrong rom( I get on this forum).
Now my tablet is bricked, cant update using recovery mode (I alread try put anothers rom version on SD CARD and nothing).
Cant acess for ADB too, in Windows I dont locate yet correct drivers for this tablet.
I just install Ubuntu on another PC, and try install ADB too, but no sucess on access tablet.
Someone have one idea to resolve my problem??
Sorry for bad english
You need to enter recovery mode.. i dont have a kinpad so idk how.
Once you are in recovery, you can then maybe fix it.

hard bricked? vs980 NEED HELP PLEASE

hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
anyone?
pete022682 said:
hello all, im a noob and think my phone is good enough to throw in the garbage. you tell me!!
so i use my vs980 on tmobiles network and only get at best hspa so i tried to throw a tmobile stock rom on my vs980 to try and get 4g ive seen people doing it i was hesitant but did it anyway. i had a zip for a verizon kernel now the rom installed successfully but the kernel didnt i meant to try to restore a backup but accidentally hit reboot and now every time i power on my phone i get black screen
fastboot mode started
reset
portchange
reset
portchange
fastboot processing commands
cant get into twrp with two button combo cant do a factory reset, infact that has changed looks a bit different than it used to, assuming its a tmobile factory reset screen
i tried to do the kdz and tot method to return to stock aswell phones not recognized for either method
i installed ubuntu on virtual box to try and push recovery.img, laf.img, aboot.img. boot.img. etc but phones not recognized in terminals fastboot says <waiting for device> any way to get ubuntu to recognize my device? any special drivers i need?
ive searched high and low for a solution im so exausted and could really use some veterans help please help this noob out... thanks in advance for any help from you guys!!
Click to expand...
Click to collapse
thats not even close to a hard brick it is in bootloader mode do not let it die keep it plugged in because if the battery dies then you have a real big problem im not sure what to do after this but i know you dont want the battery to die
well that's reassuring
Keeping phone plugged in. Now if I can get some tips as to why I cant get it to communicate with ubuntu in this bootloader mode to push the files I need. Any help anyone? Please. Where I go from here?
link - windows
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
pete022682 said:
Tried putting laf.IMG in your script folder bender it brought cmd to<waiting for device> my comp won't communicate with my phone for some reason. Am I missing any special drivers?
Click to expand...
Click to collapse
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
I will try when I get home thanks for your help so far at work no computer access. Thanks again bender I will let you know how everything goes.
bender_007 said:
Just install lg drivers - if it doesn't work then download adb drivers..
+please see the device manager for new devices and "not installed drivers"
+ look here
Click to expand...
Click to collapse
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
i was hoping so
bender_007 said:
if you manage to install the driver the rest should go easy.
It's weird, on some systems it wont install the driver properly(adb) but google nexus driver installs fine.
Click to expand...
Click to collapse
so this is where were at bender....
got drivers installed, phone is being recognized...
pushed laf.img with your script...GOT DOWNLOAD MODE BACK!!yes, progress...
went to factory restore with .TOT method.....FAILED
shows PID#, IMEI#, MODEL,D801 DLL VS980 SBUV Xdabbeb's vs98024a 1.1.1 11 SWOV Xdabbeb's vs98024a 1.1.1 11 device doesn't match
ideally i would love to just turn this vs980 into a d801 stock kitkat by pushing all nessassary d801 files would that work what would be my options here?
How do i fastboot flash open recovery twrp IMG?
Ultra brick G2 vs980! T_T
Good night lords of XDA!
I come to you after exhausting all that I could find and try, hope you can enlighten me, you would save a new G2 that is about to become a gleaming brick:
Summary: I have in hand a Verizon LG G2 vs980, with the intention of using it in Spain. After a bad flash a ROM for a different model, you could not access recovery mode or download mode, only fastboot.
Thanks to this great tutorial, I could flash by ADB and fastboot files an official ROM for this G2, but after a correct process, the G2 restarted and only shows "Security error" before shutting ...
I still do not have access to recovery or download, and now not to fastboot. Only allows me to access the screen "Factory reset", but in doing nothing changes.
How could re-flash a recovery or something like that allows me relive my G2?
Thank you very much in advance. You are my salvation. XD
PS: I apologize for any clerical error or misused term. I do not usually write in English.
Click to expand...
Click to collapse
Sorry, wrong thread. XDD

[Q] Help with Bricked LG G2

Hello Everyone,
I've been looking around and can't seem to find any guide I can get to work.
A couple months ago, I rooted my LG G2 and installed Cyanogen mod successfully. After a couple days, for some reason I restored to a backup I made back before I installed Cyan, so it was just on the Stock OS. A couple days later my phone tried to update itself and it bricked it. I was an idiot and wiped everything for some reason so theres nothing on there but the LG logo and then it goes to TWRP.
So now I'm not quite sure what to do. I can adb push and sideload just fine, but I've tried pushing a zip with the stock OS and installing it but everytime it just says it failed. Ive also pushed cyan on again and it says successfully installed and then just goes back to TWRP again. Can anyone help me with what to do from here? Do I need a certain tool to re install the OS? Will pushing it and then installing it with TWRP not work?
thanks!
Reflash lg g2 stock rom .
Sent from my GT-I9300 using XDA Free mobile app
How would I go about flashing the stock rom?
Ive been trying to use this guide
http://forum.xda-developers.com/showthread.php?t=2432476
But every time I try to use the "Automatic offline procedure" I get an error saying permission denied. I made sure the drivers and everything were installed
Any ideas?
Right click - Run as administrator.
Or do it manually
https, window enabler..etc.
Alright, so I was able to do it manually, but in the instructions it says to enable usb debugging. Just to clarify my phone is basically stuck in TWRP, so will this even work?
My comp doesnt even recognize my phone as an LG G2 it says something like ADB galaxy nexus.
cj0435 said:
My comp doesnt even recognize my phone as an LG G2 it says something like ADB galaxy nexus.
Click to expand...
Click to collapse
That's ok.
Open cmd line where your adb is. Put some rom inside.
Let's say the rom is : mycoolrom.zip
adb push mycoolrom.zip /sdcard/mycoolrom.zip
then flash it.
bender_007 said:
That's ok.
Open cmd line where your adb is. Put some rom inside.
Let's say the rom is : mycoolrom.zip
adb push mycoolrom.zip /sdcard/mycoolrom.zip
then flash it.
Click to expand...
Click to collapse
I did this, but like I said in the original post when I try to flash it, it just says failed every time. Ive tried files from all over and they all fail. Could you point me in the right direction of one that might work?
Thanks
You didn't mention download mode.
Try powering off the device, hold volume up and connect to pc ?
Is the download mode at least working ?
bender_007 said:
You didn't mention download mode.
Try powering off the device, hold volume up and connect to pc ?
Is the download mode at least working ?
Click to expand...
Click to collapse
Nope, no matter what I do it just goes to TWRP
And just to be clear it pushes over fine, and the zip is on the phone, its just when I try to flash it on TWRP it says failed. the last error code just said unable to open Zip

Lenovo A6000 Softbricke​d---- Needs some help--Plea​se

Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbric​k-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
the link from boycracked (mentioned above )actually worked the trick was to hold vol up+down key (while the phone is off) and then insert the usb into your computer, secondly my computer kept of saying that qualcomms --digital signatures not verified and the port is supposed to be Qualcomm Lenovo HS-USB QDLoader 9008 where as mine showed up to 9091, to solve this I uninstalled the drivers and then disabled digital signatures (use goggle how to disable signatures verification on whichever windows you are using) and it worked fine. Thank you all
install cwm
Install cwm from pc and then try
Use HW flash tool
Even my Lenovo a6000 plus was bricked. But mine is more complicated than your's.
I've installed CWM recovery before. But unable to access it, atleast native Android recovery either.
"Rev-app" folder from "System" folder were deleted unfortunately. I couldn't even wipe, hard reset or anything.
After a long struggle, i've found a way out. I've came across a Qualcomm flash tool "HW OneKeyDownload Tool".
And finally, i won on it!
Download it from here: docs.google(.)com/uc?id=0B3qYFBKKL2hieDM1RUNMQWRsSHc
You need to have:
1. Mobile drivers installed
2. Universal ADB drivers (That ZIP will have it)
3. Stock ROM or any custom ROM
See this post on AndroidXDA for more info:
androidxda(.)com/download-hw-onekeydownload-tool
install cwwm
installing cwm from pc is the best way to unbrick
Dont feel bro.just follow the steps which u tried before to install cwm.but before that if ur pc cant find ur mobile.then use this command.
"Adb shell"
And it shows searching for device.
Then put ur battery out and insert it again.ur device will be detect by pc.
Sent from my Lenovo A6000 using XDA Free mobile app
am also getting this same issue. Please help me.
sp_grewal said:
Please note that I have done search and tried various solutions before starting this thread :
Hi My A6000 phone got factory reset and then I tried to recover some lost pics...but I was advised that my phone needs to be rooted first, so the software opened kingo root soft, It showed me the message that phone has been rooted and when it rebooted there was a notification of software update which I said ok and ever since then the phone is stuck on system recovery mode (not sure if it is called soft brick or not) and I have tried many things including choosing all the options starting from reboot system now, apply update from ADB, wipe data/factory reset, wipe cache partition, apply update from sdcard but nothing seems to work!!! oh I for got to mention on the top of the screen it says Androoid system recovery <3e>Kraft -A6000_S035_150507 and then gives all the option and i have tried this following :
https://boycracked.wordpress.com/2015/06/03/unbric​k-lenovo-a6000/
but some how for the first solution it keeps on saying download failed, emergency recovery download failed...anyways it does not work
I have also tried this
http://forum.xda-developers.com/chef-central/android/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
but it has ADB killed (tried looking and installing adbfixer solution--it says it cannot finf adb.exe even though it is there)
Is there any soultion to this!!! Please help if there is one!
Click to expand...
Click to collapse
Recently I was tried to update mobile firmware (latest Kraft-A6000-S_S014_150730) by OTA update (via system settings->about phone->system update), that time my mobile was soft bricked like above you said. I downloaded firmware and installed then some time after got some options menu. And I attached that problem as picture.
Before that I rooted my mobile using KINGROOT apk v4.0 , there after I did unroot again using in the same app.
I thought unrooted mobile does not affect by system update (any firmware or OTA update by LENOVO). But unfortunately my mobile got problem.
I didn't took any backup before that. I don't know anything about CWM backup and all. I know only the root and unroot using KINGROOT app.
I need to recover my mobile back or tell me how to install LENOVO A6000 PLUS stock ROM or any other way is there tell me to solve the problem. Please guide me step by step process or any video link there it was little better to understand for me.
Please help me, it will be appreciated. Thanks.
Attach the device to PC through USB cable and Install the CWM through ADB .
Install the Stock Kernel through Update Zip option within the CWM.
That will freshly installs the Android OS.

stuck in recovery after wiping system while debugging mode off

Hi there, I´m newbie, I tried something and made a mistake. I´m asking for someone to help, because I don´t know way out.
My system is win10 and LG G2 D802 with kitkat. I tried to install lineageOs16 with the help of "https://wiki.lineageos.org/devices/d802/install". I got pretty far, rooted the device and transmitted with adb "lineage-16.0-20200220-recovery-d802.img.". I do not know why, but then I was unable to put the device into recovery mode. So the error happened: I switched off USB debugging. When I got into recovery mode, I did system wipe. Now the device hangs in recovery mode from LineageOS 16.0 and I can't get out. I can only switch off the device. What can I do to activate the device again? Because I'm a beginner, I don't even have an idea in which direction to go or where to get help.
I would be grateful for any information or help
Thanks

Categories

Resources