Could someone recommend an anti-dust kit?
Also can you get camera covers? Both front and back.
Related
Does anyone know how to get the clear lens bezel/cover that snaps into the upper rear housing? Mine is scratched. When disassembling the cover over the camera the only part needing to be replaced is a clear plastic disc/protector that snaps into the cover (and with the small rubber ring gasket seals dust from the board mounted camera/lens). After searching for 8125 replacement housings (ebay, here at xda, etc.) this small clear disc appears to not be included with the rear upper cover.
*BUMP*
My camera lens appears to have fallen off. Does anyone know where I could find a replacement? Thanks!
Hi,
I have the Fuze model without camera, i want to try put the camera on it, i just found some manuals which teatchs how do it but i didn't found the parts for sale. Have someone knows where to buy this parts?
Thanks.
I highly doubt that can be done...and if so it wont look great unless theres a spot for it that can be removed which I doubt
I am also interested in this mod, but there is a catch: service manual recommends replacing the front camera with the flexible printed circuit (FPC) it is attached to. And Touch Pro's FPC does not have PTT button.
So unless Fuze FPC has a spot for the front camera and you plan to solder it there, you might need to wave good bye to the PTT.
Check here... good luck!
http://cnn.cn/shop/index.php
Are there any pictures of disassembled FUZE (not Touch Pro)?
Touch Pro has a socket for second camera:
http://cnn.cn/shop/touch-slider-flex-cable-p-6697.html
but is missing PTT button.
I wonder if FUZE has this socket...
Hi,
I have fix for HTC EVO 3D front camera.If you have problems with your front camera described as not working (it shows back camera instead front) you need to do this:
1. switch phone OFF
2. remove back cover
3. remove battery
3. use micro screwdriver and tighten all screws
4. back your cover and switch your phone ON
5. front camera now should work!!!
This solved my problem 100%
Please reply here if this helped you
Just looking for some info that I Can't find doing searches.
My note 3 was thrown at a wall. The main impact was the upper right corner, near the front facing camera. The frame was bent and the front screen was shattered entirely. The screen did not even light up at all when turned on.
I've had the front screen / case replaced. The phone now looks as good as new but the following two things do not work:
- front camera (it works but its blurred. Repair guy said it was shattered)
- GPS (cannot get a lock at all, not even sure if its being detected or what)
I have a new front camera coming in the mail (less than $10), but where is the GPS? I know it's located around the impact area, but what are my options / what could it be? The repair shop said the board looks ok, but I only found out the GPS wasn't working when I was trying to use navigation on the way home.
Can I replace the GPS antenna? If so what is the part called as I cannot find it anywhere.
I am hoping that the repair shop didn't seat a ribbon cable or something but I know this is probably unlikely and that the GPS is broke. If this is the case, what can I do to fix it?
Thanks,
We have a 6.2" Android head unit with a cracked screen. I have removed the screen (front panel) using 4 screws (two each side), but can't seem to find anywhere i can buy a replacement front panel. Does anyone know where I could get one? Or does anyone have a broken unit with a decent front panel I could buy for spares?
Thanks