Hi friends!
I have problem with my p3600.
I buy it with a non original white cover.
the problem is:when I touch some point of the cover in the lower part(where are IRDA and USB),or near Camera button or miniSD slot the display frizing and hen invert the normal color to negative.
I must disassembly the front cover? it's simple?
now is totaly faulty...please help me!
fix
if you can't open it or fix it then i guess you have to bring it to repair centre ....
Sorry to hear that
this is the link how to disassemble the p3600.
http://www.mediafire.com/?sharekey=34452e2a72b9645095af63b7d44918aa2ce35c49f0667641
Hi guys/gals
My Touch dual is having some bars across the screen when i switch the camera on. i guess this is something wrong with the camera or the camera ribbon. I looked everywhere on the internet for the Touch dual/niki camera but nobody has. anyone here knows a place like cnn.cn who sells the spare part?
or anybody have this spare part for me to buy?
Hi
i would like to buy the Touch HD but at my company no camera are allowed
Is there a way to disable / remove the camera
Today I have QTEK S200 and I disabled the camera in SW but I think security now would not like this solution
Thank's for any help
Moti
Deleting the photo software should do it, but I don't know the security policy of your company. You should ask them for a solution.
Also need to disable the camera
I also need to disable the camera since it is not allowed at my work place. What should I do??
Thank you,
shilera
Easiest solution would be to remove the "Photo and Videos" tab from the manilla then put some gaffer tape over the back or get those covers that will cover the back entirely.
Dont they allow putting black tape under the back cover, and then over the cover aswell, or use a silicone case without pinhole for the camera. This way you would have to remove the back cover in order to remove the tape. So no direct photo taking. You could try to find a way to deinstall the photo app aswell. Just trying to remove some folder or registry keys should do the trick (try this when you havent fully configured your phone yet, so if something goes wrong you can hard reset).
This phone has two cameras, so if you are going to cover it with something, do the same with the VGA camera on the front.
mmmm
Most secure sites around the world have a no camrea policy , this does not mean how ever the fact that any device taht can take photo's would be removed, other wise all phone scine .. well scince phones's had camreas would not be alllowed in the building, go to an MD and remove his Blackberry.. see what happends!!...
The rule means dont take photo's.... so dont.
it is possible to tell me, how to disable the 2 cameras in the HD?
Is there any way to disable/lock the camera button on HTC S710 with AllKeys(true). I tried it but it disables all keys without the camera button and function keys on qwerty keyboard.
Please let me know
It's like carrying a GUN in some places.. loaded or otherwise immaterial. ANd such places allow only devices with camera physically removed. In case of HD provided you void warranty main camera is a separate broad I guess. But front camera can still be a problem.
I've listed my Hermes - HTC branded version - on eBay. Originally put it up on Marketplace. Also listed a few parts that seem to be harder to find including a rear camera, dpad board from a 8525 and a keyboard sub board and antenna/speaker. Don't know if I should link to ebay but here goes:
Camera
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395603571&ssPageName=STRK:MESELX:IT
Phone:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395614424&ssPageName=STRK:MESELX:IT
Scroll Wheel/Flash
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395616347&ssPageName=STRK:MESELX:IT
Speaker/Antenna Module
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395617919&ssPageName=STRK:MESELX:IT
dPad/Front Keyboard PCB
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395620644&ssPageName=STRK:MESELX:IT
All the parts were from a donor phone and work perfectly. The phone is in great physical condition and everything works perfectly as described - the front dPad gets a little flaky - generally works - sometimes won't but can start up again by moving scroll wheel. Can't use the existing part I'm selling because it doesn't match up. Apparently there are TWO version os the dpad one has the controller chip at the edge of the PCB (ATT/Cingular - DOPOD 838) and original HERMES has it more toward the center. The keypads are different. I also have the sliding keyboard PCB without the keys and a flex cable (BLACK) and keyboard FLEX. OH - have another rubber plug for the antenna as well.
If interested just PM me and I can either sell it through Ebay or take it down and do it privately.
Just looking for some info that I Can't find doing searches.
My note 3 was thrown at a wall. The main impact was the upper right corner, near the front facing camera. The frame was bent and the front screen was shattered entirely. The screen did not even light up at all when turned on.
I've had the front screen / case replaced. The phone now looks as good as new but the following two things do not work:
- front camera (it works but its blurred. Repair guy said it was shattered)
- GPS (cannot get a lock at all, not even sure if its being detected or what)
I have a new front camera coming in the mail (less than $10), but where is the GPS? I know it's located around the impact area, but what are my options / what could it be? The repair shop said the board looks ok, but I only found out the GPS wasn't working when I was trying to use navigation on the way home.
Can I replace the GPS antenna? If so what is the part called as I cannot find it anywhere.
I am hoping that the repair shop didn't seat a ribbon cable or something but I know this is probably unlikely and that the GPS is broke. If this is the case, what can I do to fix it?
Thanks,