Hi everyone!
I have a Moto G4 Plus, (XT1625) that the USB plug seem to have gone semi bad on. The phone will charge, but it won't show up under Windows or Linux, (separate machines, not dual boot). I checked eBay and it seems that the USB socket is soldered to the board. Does anyone know a way to get the USB working properly short of surgery?
BTW, I have tried different cables and I also bought a new cable, no difference.
Thanks!
zog
zogthegreat said:
Hi everyone!
I have a Moto G4 Plus, (XT1625) that the USB plug seem to have gone semi bad on. The phone will charge, but it won't show up under Windows or Linux, (separate machines, not dual boot). I checked eBay and it seems that the USB socket is soldered to the board. Does anyone know a way to get the USB working properly short of surgery?
BTW, I have tried different cables and I also bought a new cable, no difference.
Thanks!
zog
Click to expand...
Click to collapse
You have togo to a local repair shop and get the usb port repaied
Related
Hello, I have a G4 wiza200, which had a broken USB port. I bought a replacement female jack and replaced the faulty one. Everything seems to be ok, there appear to be no short circuits and the Wizard will charge when connected either to the charger or cradled. The problem is that it's not discovered from the PC and it only charges when connected. I have no way to flash the rom or unlock the SIM lock.
Anyone any ides what the problem may be or of a possible solution?
Thanks
Edit: I forgot to mention that I don't have the original cable and I'm using the one I got with my N95 but I guess that's probably irrelevant as it is just a USB --> Mini USB cable.
Check if all the connectors are soldered properly ,charging doesn't confirm that it'll establish connectivity also,maybe the connectors for connectivity is not having a proper connection.There are perhaps five connectors,check with volt meter to confirm connection or get the phone in bootloaders (multicolor screen) connect to pc via usb cable and check if small usb appears in the bootloaders,if it appears it'll confirm establishing connectivity and you can flash a rom,but if it doesn't show it means there's a connection problem,either with the mini usb port or the usb cable.
Cheers!
Thanks for the reply. I have managed to SIM unlock it by sending the enableRapi.cab to the phone and installing it and using lokiwiz over bluetooth. I will go get another USB jack tomorrow and replace it again. Hopefully the problem is there and not one of the tiny ICs.
Believe it or not, it was the cable. I used the cable of a GPS device and it worked. The wizard has now officially returned from the dead
Yeah, I believe the nokia mini usb is a four prong, and ours is a five prong.
Glad to see you got it all fixed up
Now on to flashing some roms.......
enjoy
Thanks mate, I already have. Meanwhile I have discovered that G4s have their own RUU. I'm now running TNT's touchflo version of WM6.1, I have flashed the radio and the splash screens.
I have used several WM phones before this, the two last were Atom and Atom Life. But this phone does not want to play ball with the USB extension cables I've been using all the time. First: No, the cables are all right: I can still sync my Atom Life without any problems. And I have used the original USB cable for the HD that comes with the box at the end (even though I've heard that syncing works just as well with a regular mini USB).
But neither a 3 m long extension cable (which is well below the 5 m USB limit) nor plugging it into a USB hub helps. Sometimes I can get a bit further with unticking the "advanced network" part of the USB to PC connection. But not allways. Has anybody here found a solution to that or even had the same problem?
Mine works fine on a Belkin 5 metre extension cable.
I can only sync with the cable that came with the phone. Other mini USB cables (ones that fit but are a different shape) only charge.
barryfell said:
I can only sync with the cable that came with the phone. Other mini USB cables (ones that fit but are a different shape) only charge.
Click to expand...
Click to collapse
r u serious?! damn..!!! i've never tried it with the HD. my touch pro used to work perfectly with non-factory mini usb cable...
This happened to my HD.
Phone call to orange later and they insisted on replacing it under insurance.
All they wanted to check was whether the HD and PC would sync. I told them no and the response from the script that they have to work through, was that the phone is marked as "broke" and needs replacing.
In my case I suspect that the USB port may have been damaged when the car charger cable was pulled out accidently in the car with some force. Seems that they are a little delicate, especially with none HTC cables (i.e. without the odd shaped plug with only one corner truncated). I have read that non HTC ones fit a little less snug and can put stress on the board inside the phone when plugging / unplugging.
nickallison said:
Seems that they are a little delicate, especially with none HTC cables (i.e. without the odd shaped plug with only one corner truncated). I have read that non HTC ones fit a little less snug and can put stress on the board inside the phone when plugging / unplugging.
Click to expand...
Click to collapse
You hit that on the money. I see it as a design flaw as well as a scheme to get people to buy HTC-specific accessories. But you are right, generic cables with the different connector do fit loosely and can cause issues after time if you are not gentle with it. Also, the USB connector itself on the device and internally on the solder points is poorly designed. This doesn't help.
I can sync with any cable, but it seems to be to problems:
1. If the extension is too long, it will fail.
2. If it's run by more than one USB hub it will fail. The first hub is a Toshiba docking station with a one meter cable from the laptop. The second is a D-Link powered USB hub. No matter what cable I use then it won't sync. With the cable connected to the Toshiba docking I can sync both with a regular mini USB and the original cable. Strange thing is that it only works on one of the two the front USB connections and not on one of the four at the rear! Then again Windows isn't supposed to be logical, I guess...
Normal miniusb cable works perfectly for either charging and syncing.
I even had a 7m usb cable (5m and a 2m usb extending cable), worked perfectly for either charging and syncing (I need my phone to be next to my bed, and my PC is like a few meters away from my bed).
Seriously don't know how your HD refuses to work with a cable other than the stock HD USB cable.
Hi,
are you using a custom ROM?
i used all sorts of cables, whatever happens to be lying around, infact i never use the stock one, as this is plugged it at a very inaccesable wall socket for mains charging!
generally my cables go through a hub, and then a 1m extension.
the reason i ask about the ROM is that i have flashed loads of different ROMS, and all worked fine, except one ROM (think it was topix 2.6), where it would only connect for a brief moment before auto-disconnecting. i suspect it was a 'bad flash' as they say, and so if you are using a custom ROM would suggest a re-flash. if not, you could consider a hard reset, or trying a different ROM (perhaps if it the stock ROM it has a 'bad flash' at the factory)
Tom
This thread has been hijacked (I never asked about regular mini USB versus the proprietary HTC version), but if you're asking me, I'm using the latest official HTC version (Norwegian).
mine is not picky at all...
Thank god, I checked with a mini usb that came with my external HDD and it worked perfectly...
I tried 3 other cables and none of them work apart from to charge.
I'll see if it's an issue with using my hub.
barryfell said:
I tried 3 other cables and none of them work apart from to charge.
I'll see if it's an issue with using my hub.
Click to expand...
Click to collapse
Have you tried updating usb drivers?
Fallen Spartan said:
Have you tried updating usb drivers?
Click to expand...
Click to collapse
No i'll try that when I get home.
Thanks
I have this issue with a specific cable on vista64, the phone only charges, but if I connect it to a Ubuntu box, I can sync, share network etc.
I think M$ is the issue in that case.
Hello recently I notice that when I plug the tablet in to my computer or through otg USB for data transfer it doesn't connect. However when I plug it in to for power to charge not charge s no problem. I fix it before thougt it was the electrical tape input over the speakers for good contact since I was having connection issue there. Any help would be great.
ave you tried using another micro usb cable? I have troubles to connect my N7 to pc with original cable but it works for charging fine aswell. I just use my phone cable to transfer files.
I have two other cables and they all do the same as well. Even when use otg with a USB it doesn't light up or shows up as working. Can anyone help me to were it may it the issue inside the tablet. Maybe a loose ground or somewhere. Just need the area where it may be the issue. Also maybe a website or eBay user you have used to replace the charging port with 3.5 mm audio jack since . preferably on eBay. Hope someone can help me out there.
There aren't many things that can go wrong. In the 2012 N7 (and many other devices) there are basically three possibilities:
- the USB cables (if you got multiple cheap cables, you may have multiple bad cables - I got two Monoprice cables a few years ago and they lost their snug fit within a year, they still work but I need to let the cord hang off the side of a table if I do not want the data or power connection to break. The original cable still works perfectly in any orientation)
- the USB port on the device (could be from wear or pulling/angling/torquing whatever is plugged in the USB port. You could theoretically buy an identical USB connector and replace the connector only, which is what people do with the 2013 N7 since the USB/power board assembly can cost over $100 to replace)
- the USB/audio ribbon cable being loose or broken, most likely at the motherboard connector for the 2012 model. If you want to replace that, the 2012's flex cable is relatively cheap at around $15
USB Port
I have replaced the USB port on my 2012 three times so far. They just seem to wear out, and this is without excessive use or abuse. I maybe should start buying them in bulk. They are only $* on Amazon.
ive replaced the usb port, fully updated the phone, tryed a friends battery, new charging brick and cords , tryed different
outlets and the phone will not fast charge or show up on the computer/any computer.
when i plug it into the computer i get a error message:usb device not recognized or malfunctioned (i shortend it)
much help needed please and thank you
With regards to the fastcharging part, are you also sure you are using an adapter that supports 2Amps at 5V ? This is also the spec of the original adapter that came with the phone (I also found that it works with different 2.1 Amp. adapters generally for tablets)
albanianagi said:
ive replaced the usb port, fully updated the phone, tryed a friends battery, new charging brick and cords , tryed different
outlets and the phone will not fast charge or show up on the computer/any computer.
when i plug it into the computer i get a error message:usb device not recognized or malfunctioned (i shortend it)
much help needed please and thank you
Click to expand...
Click to collapse
I have the same problem. I changed the USB board but the problem was on the motherboard. I test all possibilities soft and we did. I changed USB card, USB cable and nothing. I went to a service and said that it is guilty USB chip on the motherboard. True or not I do not know but the man said he changed and now it works. It cost $ 50. He said it's a motherboard intervention more difficult.
Hi guys, I'm new here and could really use some help
I finally upgraded to the 6T from my OP2 yesterday. I got a T mobile variant (in great condition) and wanted to convert it to international. The problem is I can't seem to connect it to any computer. I have tried 5 computers and 3 different cables, the phone just doesn't get detected. USB preferences remains grayed out and windows doesn't even detect something is being plugged in.
I have tried installing the OP drivers, and qualcomm drivers, made no difference.
I also noticed that the usb-c to headphone jack doesn't output any audio through my earphones. Dash charging isn't working either.
Is my usb port damaged? It seems like theres no data going through it at all
adbnoob said:
Hi guys, I'm new here and could really use some help
I finally upgraded to the 6T from my OP2 yesterday. I got a T mobile variant (in great condition) and wanted to convert it to international. The problem is I can't seem to connect it to any computer. I have tried 5 computers and 3 different cables, the phone just doesn't get detected. USB preferences remains grayed out and windows doesn't even detect something is being plugged in.
I have tried installing the OP drivers, and qualcomm drivers, made no difference.
I also noticed that the usb-c to headphone jack doesn't output any audio through my earphones. Dash charging isn't working either.
Is my usb port damaged? It seems like theres no data going through it at all
Click to expand...
Click to collapse
Well if it's not even charging or playing audio then yes, I'd wager the USB Port is damaged.
DarthVader said:
Well if it's not even charging or playing audio then yes, I'd wager the USB Port is damaged.
Click to expand...
Click to collapse
Regular charging works, just not dash charge. And the buttons on my earphones can play/pause music, but there's no sound output. I've been reading a few pixel forums, this seems to be a common issue with pixel 3's. Was just hoping to see if others here have faced similar issues and how they got around it
Have you tried to clean port with toothpick or brush also your dash lead or charger may be faulty, dash charging will only work with dash lead and dash charger. Also usb type c are prone to failure i would clean and replace lead and go from there before juming to charge port replacement, if necessary ctdi in poland do a great job and authorised repairs for oneplus