Hey,
i bricked my P9 Lite VNS-LN 31 and i have no backup...
I already tried to flash OS via TWRP, dload and fastboot but none of it works for me
Can someone upload a backup file for me?
Please
That is not how it works... You need a raw dump of the stock system and boot if you didn't upgrade to nougat. In a case you upgraded to nougat read, there are a few guides how to downgrade...
Related
Hi All.
Thank you in advance for your kind help.
I live in Spain, I bought a Huawei P8 Lite in special offer during black friday.
I managed to Unlock bootloader, Flash Twrp and Install SuperSu.
So far everything was good but after having installed SuperSu the phone was getting stucked on Huawei Logo after bootanimation.
I did a full wipe with TWRP. I wiped everything (dalvik cache system data cust) etc...
I guess it was easy to install a new stock rom but.........
I was wrong. Stock Rom are .APP and not flashable with TWRP.
I do not know what to do now my phone only recovers with TWRP but nothing is installed.
I'm stupid I did not backup anything.
My mobile is Huawei P8 Lite. ALE L21 FCC ID QISALE L21
I dont know what to do please I would be very thankfull if you could help me!
Thank you
barons0487 said:
Hi All.
Thank you in advance for your kind help.
I live in Spain, I bought a Huawei P8 Lite in special offer during black friday.
I managed to Unlock bootloader, Flash Twrp and Install SuperSu.
So far everything was good but after having installed SuperSu the phone was getting stucked on Huawei Logo after bootanimation.
I did a full wipe with TWRP. I wiped everything (dalvik cache system data cust) etc...
I guess it was easy to install a new stock rom but.........
I was wrong. Stock Rom are .APP and not flashable with TWRP.
I do not know what to do now my phone only recovers with TWRP but nothing is installed.
I'm stupid I did not backup anything.
My mobile is Huawei P8 Lite. ALE L21 FCC ID QISALE L21
I dont know what to do please I would be very thankfull if you could help me!
Thank you
Click to expand...
Click to collapse
You need to extract recovery.img from UPDATE.APP using this program on pc.
Link: https://goo.gl/aSMU9M
After that go in fastboot and rescue mode and connect it to your pc.
On minimal adb and fastboot window type
fastboot flash recovery recovery.img
After this you can either flash stock rom by sdcard upgrade or fastboot.
I personally recommend sdcard upgrade.
Put dload folder in sdcard root directory and turn on your phone by holding all buttons for several seconds. After that wait at least 20 minutes for phone to upgrade.
Hello everyone !
I'd like to know the way to go back to Emui, 4.1 or 5.0, after a installation of Lineage Os on my device, a CAN-L01.
Can anybody help me and the people that installed Los and want to go back to Emui too ?
Thanks
M4rt1 said:
Hello everyone !
I'd like to know the way to go back to Emui, 4.1 or 5.0, after a installation of Lineage Os on my device, a CAN-L01.
Can anybody help me and the people that installed Los and want to go back to Emui too ?
Thanks
Click to expand...
Click to collapse
How Did you installed LineageOs with fastboot or twrp and did you ever flashed nougat firmware?
You can flash stock firmware via fastboot you need to install on your pc firmware finder, huawei extract tool, fastboot and hisuite (for sub drivers).
So - open firmware finder and search fwd for can-l01 download it and extract update.app
- run huawei extract tool,open update.app with it and extract (with right click) boot.img, cust.img, recovery.img, system.img and userdata.img (cust.img and userdata.img are just in Marshmallow for nougat rom you only need to flash boot, recovery and system) in the root of fastboot folder
- run fastboot trough cmd and flash images you have extracted with huawei extract tool.
If you never flashed nougat you can flash marshmallows, in firmware finder marshmallow firmware is somewhere about 1.9gb.
---------- Post added at 08:23 PM ---------- Previous post was at 08:05 PM ----------
Or you can try the other method, download fwd with firmware finder, extract update.app, extract with huawei extract tool recovery.img, flash recovery with fastboot, create a new folder in the root of your ad-card and name it dload, copy the update.app in dload folder, open the dialer app and type
Thanks for your fast reply !
I installed Los with TWRP.
In fact, I have tried for a week to install Emui 5.0, I flashed again and again changing my method but the best result I got was a bootloop, so I went back to Los. I did a full backup of my system running onto Emui 4.1 but to perform something like this I had to remove encryption from my /data partition, I did it with the command fastboot erase userdata. However, everytime I was booting the rom it encrypted the /data... So my backup doesn't contain /data and I think it is the reason I havn't been able to go back onto Emui so far.
Could you provide me a link to download a fullota of any Emui 4.1 firmwarefor CAN-L01C432 or C109 ? I already looked for it but I can't find anything.
M4rt1 said:
Thanks for your fast reply !
I installed Los with TWRP.
In fact, I have tried for a week to install Emui 5.0, I flashed again and again changing my method but the best result I got was a bootloop, so I went back to Los. I did a full backup of my system running onto Emui 4.1 but to perform something like this I had to remove encryption from my /data partition, I did it with the command fastboot erase userdata. However, everytime I was booting the rom it encrypted the /data... So my backup doesn't contain /data and I think it is the reason I havn't been able to go back onto Emui so far.
Could you provide me a link to download a fullota of any Emui 4.1 firmwarefor CAN-L01C432 or C109 ? I already looked for it but I can't find anything.
Click to expand...
Click to collapse
http://www.htcmania.com/showthread.php?t=1233848
Can you upload your backup? I was looking for Can-l01 marshmallow backup.
I can upload my backup if you want, but this is a CAN-L01C109, France version.
I'll share the link when I finish downloading the C432B100 and uploading my own.
M4rt1 said:
I can upload my backup if you want, but this is a CAN-L01C109, France version.
I'll share the link when I finish downloading the C432B100 and uploading my own.
Click to expand...
Click to collapse
Did you uploaded your backup? Still waiting for download link.
So i f*CKED up my p9 lite. The original os is L31C02 but a while ago i flashed the L31C432 oeminfo and im been using the B160 version since then, no problems. Yesterday flashed the L21 version of nougat, and when i wanted to come back to MM i wiped data and system with TWRP, and now i cant downgrade using the dload tutorial method ( gives me error ate 48%), tried flash nougat trought revolution recovery, gives me allways error 7. Tried pull the system.img and boot.img using fastboot but it only allows me to use files from nougat, and never boots up... Really i think i tried everything and my phone is dead ..... Any suggestions??? thank you
nitroax said:
So i f*CKED up my p9 lite. The original os is L31C02 but a while ago i flashed the L31C432 oeminfo and im been using the B160 version since then, no problems. Yesterday flashed the L21 version of nougat, and when i wanted to come back to MM i wiped data and system with TWRP, and now i cant downgrade using the dload tutorial method ( gives me error ate 48%), tried flash nougat trought revolution recovery, gives me allways error 7. Tried pull the system.img and boot.img using fastboot but it only allows me to use files from nougat, and never boots up... Really i think i tried everything and my phone is dead ..... Any suggestions??? thank you
Click to expand...
Click to collapse
Flash nougat recovery by adb and then force update by the three buttons
Flash oeminfo then dload b160..
Potato997 said:
Flash oeminfo then dload b160..
Click to expand...
Click to collapse
Already did that and wont work. I revived my phone by putting the UPDATA.APP from nougat on dload folder and directly use 3 buttons installation to flash. IT WORKED
Hello everybody,I have a question :
My P9 Lite (VNS-L31 C432B380)is asking me for B388 update.
I rooted my phone using OldDroid's TWRP 3.1.1-1,and official TWRP.
I know i need the stock recovery to be able to install update from settings.So,i googled a bit,and impossible to find the B380 firmware (my Idea was to extract the recovery from it using Huawei extractor).Then i remembered Firmware finder,and I looked for the B380 inside the App.There I see 2 entries for B380,OTA-MF (290MB) and FULL-OTA-MF (1,6GB).
From which one Can i extract the stock recovery safely with Huawei extractor ?
Thanks in advance !
P.S : if there's others ways to update than unrooting,reflashing stock recovery,installing update and then reroot,please tell me !
EinderJam said:
Hello everybody,I have a question :
My P9 Lite (VNS-L31 C432B380)is asking me for B388 update.
I rooted my phone using OldDroid's TWRP 3.1.1-1,and official TWRP.
I know i need the stock recovery to be able to install update from settings.So,i googled a bit,and impossible to find the B380 firmware (my Idea was to extract the recovery from it using Huawei extractor).Then i remembered Firmware finder,and I looked for the B380 inside the App.There I see 2 entries for B380,OTA-MF (290MB) and FULL-OTA-MF (1,6GB).
From which one Can i extract the stock recovery safely with Huawei extractor ?
Thanks in advance !
P.S : if there's others ways to update than unrooting,reflashing stock recovery,installing update and then reroot,please tell me !
Click to expand...
Click to collapse
The way I did it is by downloading the FULL update (it's 2go) an update extractor(found in this forum) extracting the recovery from the update app... Flashing it using adb... Updating normally (make a save of the 2go update and remember the directory just in case to avoid having to dl it again) the reflash twrp and root!!
Sent from my HUAWEI VNS-L31 using Tapatalk
The biggest package I can found on FF is 1.601GB where did you find your 2Go one ?
EDIT : downloading the fullOTA-mf package gave me a 2.51GB update.app file. update extractor sees recovery.img and recovery2.img,which one do I have to take ?
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Try to install Service ROM from SD card using dload method.
Link:
https://androidhost.ru/41d
Follow instructions in file "ReleaseDoc". (Read everything carefully before doing anything).
Through this process, your data will be deleted and bootloader will be locked again.
Dload method works with Stock Recovery only, you have to install Stock Recovery first.
toto6976 said:
Hello, I have a 2016 p9 lite. I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom.
build number: VNS-L31C432B412
version of EMUI: 5.0.1
Android 7.0 version
How should I do it ? Where can I get the original rom?
Currently I have twrp elite 3.1.1.1 installed and it refuses to boot on the system because: "encryption unsuccessfull: encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible.
Please help
Click to expand...
Click to collapse
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Dadditz said:
Hey dude !!
So you bricked the device ....
I don't know why but if you want B412 firmware
you can use @-Alf- guide and re-upgrade via Firmware Finder
to B370 fullota-mf-pv first, then to B412 fullota-mf...
Or download a previous from B412 firmware (ex: VNS-L31C432B410 fullota-mf)
and use HuRupdater method to flash the firmware.
Extract then stock recovery from B410 via Huawei Extractor and flash it via TWRP.
Re-update finally to B412 using Firmware Finder.
I can help you doing this, worked on my ex device but i can't guarantee 100%.
Cheers
Click to expand...
Click to collapse
Please read carefully, Maestro :
"I would like to sell it. So I would like to re-lock the bootloader and re-install the original rom."
Piece.
Hello,
I reinstalled the custom rom that I found on the net: C432B414 with Hurupdater.
It works.
However, the bootloader is still unlocked ... however, I would like to return to the factory configuration with the bootloader locked.
https://www.cjoint.com/c/JItgZO6GuGB
I have the stock recovery install :
https://www.cjoint.com/c/JItg7SqQmdB
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
toto6976 said:
I am currently downloading the file indicated by this link : https://androidhost.ru/41d
In the file provided by Alf, there are two files:
'HUAWEI P9 Lite Android7.0 rollback to Android6.0 operation instruction'
'HUAWEI VNS-L31C432B416 Software Upgrade Guideline'
which one do I choose
Click to expand...
Click to collapse
Unpack downloaded .zip package, you will see two files - ReleaseDoc and Software. Open "Software" and unpack SDUpdate_Package.tar.gaz. Transfer file dload to SD card and follow instructions - there is 'Software upgrade guidline' in file ReleaseDoc.
Edit.:
You can also safely lock BL with OEMINFO flashing and rollback to A6:
-Download OEMINFO:
https://mega.nz/#!xhEwFYLZ!Sv2nB5GERB_js76sAUWxj8hQgsjnf_YPobVbtrxpCew
Transfer it to the SD Card.
Download VNS-L31C432B160 fullupdate.zip:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66015/f1/full/update.zip
Create a folder dload on your SD , unpack downloaded .zip file and copy it to the dload folder.
Install TWRP 3.1.0-2:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
using command
fastboot flash recovery2 twrp.img (OVER eRECOVERY!) , boot in TWRP, fĺash oeminfo.zip , go back to TWRP's main menu, select Reboot and Power Off. Then use three button combo and flash firmware from dload. Your phone will running A6 with locked bontloader. If you want, you can upgrade back to A7 via OTA update or using Fipmware finder.