Related
For Rooting, Unlocking, Installing Recovery in HONOR 4C MARSHMALLOW,,, Go Here [ROOT][MARSHMALLOW][HONOR 4C] Root, Recovery & Bootloader Unlock by HassanMirza01
For Rooting, Unlocking, Installing Recovery in HONOR 4C KITKAT,, Go Here [ROOT][KITKAT][HONOR 4C] Honor 4C Root, Recovery & Bootloader Unlock by HassanMirza01
For Rooting, Unlocking, Installing Recovery in HONOR 4C LOLLIPOP,, Go Here [ROOT][LOLLIPOP][HONOR 4C] Honor 4C Root,Recovery, Bootloader Unlock by @HassanMirza01
DESCRIPTION:
Hey Guyz Welcome Again in my next Tutorial... Today Am gonna show How to Upgrade/Update your HONOR 4C to Android 6.0 Marshmallow.
If your Gonna Step in to Marshmallow from Kitkat or Lollipop, didnot Mattar Both process take same time.....
Lets move on it...
PREREQUISITES:
First of All you should have the files needed for that....
1) Indian B330 ROM Lollipop
2) Indian B370 Update OTA zip
3) Indian B510 Marshmallow OTA zip
4) Indian B521 OTA update zip
Links for these files.....
[UPDATED]Indian B330 ROM Lollipop and decryption Key is !ldp5f_t_y7JaPIjCRugiYuS3QOHezIWgQoC2RwCCjrc
Indian B370 Update in form of zip file
Indian B510 ROM Marshmallow update in zip form
B521 from B510 Marshmallow OTA zip update
In Case you have B390 build, flash this zip directly to get B521 ROM Marshmallow
B390 to B521 Marshmallow update direct
PROCEDURE:
Now First thing is if you dont have the indian ROM,,, i have the guide to Flash any ROM on your 4C even of different Regions....
Here is the Link for that Thread!! Guide to Flash Any ROM
You just have to flash the first ROM which is of G-Play Mini's ROM but dont worry....its the solution for everything for 4C...
Now Extract the B330 lollipop ROM, you will have the update.app file of about 2.5GB...
Backup your all data first,,, It may wipe your all data.... dont blame me then...
If you are on currently B390 or any other Build, Flash directly by Putting this update.app in dload folder and then put dload folder in Root of your SD Card...now go to Settings>Updater and then press Menu and then Local Update... you will find the pkg here... just install it...
Now Flash the Vendor pkg present in same folder of B330 if you are converting to indian ROM... flash vendor's update.app in same way as you flash update.app of B330 ROM...
Now you should have B330 installed successfully... and you should have Build number CHM-U01C636B330 otherwise you're gonna get error of 5%
Now Rename the B370 update zip to update.zip and put it in dload folder in root of your sd card..
Now go to updater and then local update... And install update too same as before!!, it will install that update.zip of B370 ROM..
Now you have B370 installed....
Now times to flash the B510 Marshmallow ROM.... rename Marshmallow file to update.zip file and then do the same procedure we do for installing B370 ROM...
Now flash the Patch for B510 by HassanMirza01.zip file attached below using twrp recovery (Link and method for TWRP) and you will have the option of local update in B510... then flash B521 using local update method.
Then do same for B521 update like we do with B510.... after successfully flashing... Phone will booted again and BOOM!!
Latest Marshmallow now installed
Also Here is the Link for Full Marshmallow Rom in case above MM file stuck or whatever, Link for Full Marshmallow ROM B510
Flash it on B370 or G Play mini ROM, it will install whole Marshmallow ROM.
For any question, ask below.....
In Case you dont like this Rom, and you wanna downgrade to Lollipop again, here is the Link for Lollipop Rom
Download it, unzip it, put dload folder in root of sdcard. Now MM dont have local update option so dial code *#*#2846579#*#* in MM Rom, you will see software upgrade option there... Press it and your done
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
XDA: DevDB Information:
[ROM][HONOR 4C] UPGRADE your 4C to Android 6.0 Marshmallow by @HassanMirza01
Contributors:
@HassanMirza01
Megha Shyam Chinna for Providing Links
Version Information:
Status: Stable
Stable Release Date: 2015-09-28
Created on: 2016-02-17
Last Updated on: 2016-04-13
Reserved
after i install B370 and try to install M after 5% its failed any idea ?
help
help please i got bootloop when i tried to root marshmallow what i can do ? sorry for my bad english
i follow the guide step by step :C
@mada222 from which version u are converted to M ??
@barza69 u swipe on twrp screen ?? After rooting, flash stock recovery...
inshaalmirza said:
@barza69 u swipe on twrp screen ?? After rooting, flash stock recovery...
Click to expand...
Click to collapse
yes i swipe wipe cache after rooting im gonna flash stock recovery then im gonna flash b330 thanks bro
I have a question, which recovery you use to flash the zip file?
@Paco_marine stock recovery can flash official zip files OTA updates.. But dont try this method yet... Wait for the final release.
inshaalmirza said:
@Paco_marine stock recovery can flash official zip files OTA updates.. But dont try this method yet... Wait for the final release.
Click to expand...
Click to collapse
OK thanks for your advice.
Hi
I have G Play Mini with Lollipop 5.1.1 ,rooted and unlocked
Model CHC-U01
Compilation CHC-U01C432B310
I can update to Marshmallow ????
Thnks
Boot loop !!
I did it wrong bro, and now im stuck in boot loop , i tried to flash my old rom again using v+ + v- and power off but it doesn't work ! need help
For bootloop, flash whole lollipop rom wid fastboot.. Flash boot, recovery,system and cust
inshaalmirza said:
For bootloop, flash whole lollipop rom wid fastboot.. Flash boot, recovery,system and cust
Click to expand...
Click to collapse
Sorry , can you specify your answer ?
---------- Post added at 07:51 PM ---------- Previous post was at 07:22 PM ----------
inshaalmirza said:
For bootloop, flash whole lollipop rom wid fastboot.. Flash boot, recovery,system and cust
Click to expand...
Click to collapse
I flashed cust.img , recovery.img , system.img and boot.img separately using adb fastboot & Huawei update extractor , after flashing them i retried to flash the update again using three buttons and the same massage "Software install failed !, incompatibility with current version"
Flash chc rom named middle pkg first before upgrading to marshmallow...for non indian users
inshaalmirza said:
Flash chc rom named middle pkg first before upgrading to marshmallow...for non indian users
Click to expand...
Click to collapse
WoW thanks you it worked now ! my phone get back to live :good::good:
@Ali.Feraoon gud luck bro... Hit thanks if it helps you
What new feature in B510 ?
Good work Bro, have you tried to root it?
Thanks for the great guide! You rock! May Allah bless you!
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
drlsd said:
HI
can anyone help me to rollback my nxt-al10 to emui 6 please
Click to expand...
Click to collapse
Emui 6 ?? or maybe you want to say emui 4 and android 6 ??
Yes ,thank you very much ,i mean emiu 4.1 please
drlsd said:
Yes ,thank you very much ,i mean emiu 4.1 please
Click to expand...
Click to collapse
unlock & flash TWRP recovery & flash another firmware using TWRP
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
bodzio3333 said:
I would like too to rollback my nxt-al10 from emui 5.0 (android 7.0) to emui 4.0 or 4.1.
Now my rom is nrd90m test-keys (AL10).
I read last post and I don't know how to unlock & flash TWRP recovery - before emui 5.0 I use SRKToolHuawei but now SRKTool don't support emui 5.0
Guys pleas help me.
Click to expand...
Click to collapse
If you're on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
amin318 said:
If you're on nrd90m test key ,you can simply dload your last EMUI4 or 4.1 rom
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
bodzio3333 said:
I tried with dload method rom NXT-AL10C00B386 and while after boot in update I see that:
Software install failed!
Incomatibility with current version.
Please download the correct update package.
Please help
Click to expand...
Click to collapse
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
amin318 said:
Did you change your phone's cust version? If u changed it you should dload a firmware (4/4.1) that match with your new cust
I rolled back with this method dozen times when EMUI 5 was not officiall!
Sent from my Huawei Mate 8 using Tapatalk
Click to expand...
Click to collapse
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
bodzio3333 said:
No. this time my rom was stock I dload NXT-AL10C00B386, lost root and unlock bl and them do OTA to EMUI 5.0.
I realy don't know when I stuck od NRD90M. One time I pull the phone out of my pocket and see red message after reboot... that's all.
Hisute can't help me, I try.
Some advices, please.
Click to expand...
Click to collapse
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
I created a al10 roll back for all al10 phones. It converts it to a DL0017 dual active sim. Message me for details how to obtain it from me .. MUST have twrp installed .
Samavb said:
Is that red message verification failed message?
If yes then please unlock the bootloader again even if it says unlocked. Then it will do factory reset and the red message will disappear.
You can then try to flash the stock firmware in TWRP. You can use B368 or B386 stock firmware from another thread and flash in TWRP. That is if you have TWRP. If you don't then unlock bootloader and then install TWRP using SRK tools. You can use SRK tools for adb commands also. Just type 000 on first page off srk tools and you will get into command prompt. Using that push the TWRP into your phone. ADB is very stable in srk tools and it will always identify your device. So that problem you won't have.
I couldn't find a proper rollback for AL10 . May be some one else can give if it is there for this model. If it was L29 model then rollback package is available and you can easily rollback using that in this type of situation.
If the flashing of stock ROM worked then you try to debrand your phone to L29 later. You will have many options then and L29 firmwares are more stable. I have AL10 which I debranded to L29 & I totally recommend debranding to C432 once your problem is solved
Do the above steps only if you are on marshmallow firmware.
Don't forget :good::good::good::good::good:
Click to expand...
Click to collapse
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Unlock bootloader ADB commands + Stock + Debrand
bodzio3333 said:
Thank you for help
Yes it is red message verification failed message.
I'll change AL10 to L29C432 when I can do that
The bigest problem is that I stuck on androit 7.0 emui 5.0.
So maybe you help me unlock bl (I have unlock code) and flash TWPR....
Click to expand...
Click to collapse
If you want to unlock bootloader through ADB?
Here are the steps.
In your phone go to settings - >developer options - > put usb debubbing ON
switch off the phone.
Press and hold the down button for 3 seconds & then connect it to the computer
It will then go to fastboot mode.
then open SRK tools
type 000 to enter the command prompt.
Type the following command
fastboot oem unlock xxxxxxxxxxxxx
In this command xxxxxxxx is your bootloader code. just replace xxxxxxx with your code and press enter.
This will unlock your bootloader & will do a factory reset.
In SRK tools there is an option for bootloader unlock but I think that is only if you are in EMUI 4.0 or EMUI 4.1 that is what I think may be anyone else who tried this option in android 7.0 can confirm but the adb commands will work.
I have enclosed screenshots for better understanding.
you have mentioned that you are in Android 7.0
Can you tell me your exact firmware that you have on your phone at the moment?
After you get rid of that red message. Your bootloader is unlocked.
There is Erecovery process - > steps below (but there is a problem with this process)
1)Switch off the phone.
2) Press and hold the volume up button and then connect your phone to computer or charger. Yes charger. Then you can download stock firmware through your WIFI - > this will also install stock firmware. But I think this won't work because of unlocked bootloader
So once again install the TWRP for Android 7.0 I think it is Twrp 3.0.2 or Twrp 3.0.3 - > this is definitely for nougat.
ADB command to install twrp recovery is
fastboot flash recovery twrp.img ( rename the TWRP to twrp.img ) in the adb.
Try to flash the stock firmware zip files in TWRP.
Here you have two options - > You can either try flashing B386 files (only one zip file) or B562 (android 7.0 - > 2 zip files - first update.zip and then the other zip file)
If you are successful in this step then your TWRP will be overwritten with stock recovery.
That is ok. don't worry. Kangvip ROM is pre-rooted ROM. So you will get root in the end. For now its ok to be on Stock at this step.
Stock Recovery + Stock ROM + bootloader locked -> then you can dload back to EMU 4.1 using B386 firmware.
Then you can unlock bootloader (again) yes its a pain + followed by TWRP + ROOT - one after the other in SRK tools its all there. you can use the options in SRK tools this time.
And once you have root again.
Take backup and save it on your SD card. (except DATA , take backup of all options listed there, why? bcoz if you include data - > it will increase the backup size and it will take more time.
*Disclaimer* -> Very tricky & risky process - proceed with caution & full attention
Then - > you can debrand - > to C432 -(debranding is very tricky process, so keep your backup handy) This should be done very carefully because any problem here means you might find less space on your internal memory. Then you will have to restore that backup to get back your space.
Here is the link to excellent tutorial by somboons Watch it carefully.
https://www.youtube.com/watch?v=JZVsIKtdgV4
Just follow that as it is for debranding from AL10 to L29-C432
I am very very sorry for all these confusing and tricky steps. Please proceed with caution when you are doing the debranding process. Do not get diverted during that process.
Yes I did all this when I debranded my Huawei Mate 8 AL10 to L29. I had lot of anxious moments, doubts & my mind started playing tricks if mate 8 was dead on few occassions. But in the end my phone prevailed. Now I am happily using L29 - Kangvip B577. That is where I want you to land up in the end.
Do not worry and do not panic any time. Be prepared to face few challenges during this process. I will help you but please share your experience and follow the steps carefully.
During debranding you might have your phone rebooting or something might happen. That time do factory reset and continue from where you left off. If you get red message - > then you have to unlock bootloader. Otherwise continue.
This whole process will test your patience & consume time. So I hope you are willing to do this. Its worth it. I learnt my lesson, I am never buying chinese version of Huawei phones/tablets again. Only European models from now onwards.
Finally
Do not forget to click on :good::good::good::good::good::good::good:
I hope you understand.
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Options
bodzio3333 said:
I stared few hours ago.
First unlock bl - red message disapire
After bl I was error durind format bus system run witout any problem.
Then flash TWRP 3.1.0-2 and try to flash NXT-AL10C00B368-update.zip but I see this:
http://gofile.me/6tsPr/sHOJ4cLcr
http://gofile.me/6tsPr/cXniG4g8D
Some advices?
Click to expand...
Click to collapse
TWRP 3.1.0.2 is actually used for flashing nougat firmwares.
Which firmware are you on right now?
Are you on nougat or marshmallow? Please provide the full firmware build number.
if your phone is on marshmallow.
TWRP version depends on your firmware.
If you are on EMUI 4.0/4.1 then pls use the TWRP 3.0.2
you can use SRK tools to install that TWRP if you are on EMUI 4.0/EMUI 4.1
Install that version. Then
Factory reset
Flash the B386 zip file in TWRP.
You can get the B386 from here https://forum.xda-developers.com/showpost.php?p=69331930&postcount=1338
If your phone is on Android Nougat.
Then you have to use dload method.
Unzip the B386 zip file.
Put the update.app in the dload folder inside your external sdcard.
Go to your dialer
*#*#2846579#*#*
Select "software upgrade"
then Select - > SD card upgrade.
And then it will reboot and install the stock firmware.
This thread has all the Stock firmwares.
https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
Hope the above steps solve your problem. If not, then we will try something else. please answer all the questions to help you better especially your full build number (firmware version).
:good::good::good::good::good:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
TWRP & Erecovery methods
bodzio3333 said:
Thank you
I'm on emui 5,0 android 7,0 nugat ROM nrd90m test-keys - before I don't remember, upgrade ota for AL10 model. Maybe AL10C00B552.
So I have to try flash nugat ROM AL10 by TWRP 3.1.0.2.
Dload method dont work - I never need sd card for this.
Can I flash nugat rom dload method? And where I find stock recovery for nugat?
Click to expand...
Click to collapse
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Go to settings - > about you should see that B584. in build number.
If your build number is showing anything other than test-keys then you will be able to use dload method or Hisuite method using PC.
Now if IT IS showing B584, then you can dload to B386. then unlock bootloader -> TWRP using SRK tools - > Root - > and then debrand to L29C432. - > this is the road map for you. we will go through this only after you succeed in the above steps.
Try the below steps only if the above steps don't work
if you want to flash the nougat recovery
then unzip the zip file in link 1.
Use Huawei update extractor software HuaweiUpdateExtractor_0.9.9.3
and then extract the recovery.img from the update.app file.
now
switch on usb debugging in your settings.
switch off the phone
press & hold volume down and then connect to phone to laptop
put the extracted recovery.img file in the same folder as the SRK tools
open SRK tools
type 000 to enter command prompt
type fastboot flash recovery recovery.img
(please remember all these steps that use adb commands come with element of risk. so please proceed with caution and go slow. Proceed with these steps only if you know what you are doing otherwise do not proceed)
Try the TWRP steps first and see if that will resolve your issue before flashing any stock recovery. If your flashing through TWRP then it will install stock recovery & stock ROM.
Please share your progress.
:good::good:
Samavb said:
Since you are on nougat with test keys, try to flash the latest nougat firmware on your phone model NXT-AL10 (Try flashing firmwares using TWRP )
Link for the firmware
link 1 https://mega.nz/#!Y4IVEbxY!7C8u3FP3V8eAV4jVNmbRUfj2W1nc8p5gMtaScVmzeA0
if the link 1 doesn't work then try link 2
link 2 https://mega.nz/#!U9ZkTZzI!fbPnyDIxCGGFkiGxtF3SMicLqmTDNTq8SG8fVw8lfz8
download & flash it using TWRP.
Once you finish flashing - you should have android nougat stock B584
Click to expand...
Click to collapse
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
2 Answers
bodzio3333 said:
You must know that I'm very grateful for your help
Do I have to format data before start flashing B584.zip or do nothing?
Do I need update_data_full_all_cn.zip ?
Click to expand...
Click to collapse
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Samavb said:
Glad to read Ur kind words but V have a long road ahead. So let's fix ur phone :good:
Answers
1) Yes, you can format DATA before flashing this zip file. you can also do factory reset before flashing the zip file. (Remember we are doing this step only to get ur phone out of that test keys & this firmware is not ur final firmware that u will use. )
2) I was searching for a firmware that u can flash on ur phone and I found B584 and felt this might help. The guys in the other thread mentioned it as full firmware. After u flash this firmware, check in settings - > about - > build number if it is anything else other than test keys then u succeeded in this step.
Goal of this flashing of B584 is only to get rid of that test keys in build number. Once that is gone then U can downgrade to B386 using steps in my previous posts followed by the road map.
:good::good::good:
Click to expand...
Click to collapse
When I flash B584.zip see this error in twrp:
Failed to mount '/cust' (invalid argument)
Failed to mount '/version' (invalid argument)
E:unknown command [errno]
E:unknown command [errno]
Update process ended with ERROR: 7
No good.....
[SOLVED] Hi i was on l-31c432b381 firmware with emui 5.0 and android 7.0, i have unlocked the bootloader for install magisk 12.0 and have root permissions, after months i saw an update for my phone (b389) so i tried to upgrade but i had twrp so error 1 or 7, i flashed the stock recovery, redowload the update and the install failed at 5%, so i tried to unistall magisk before update, but nothing it wont update, after few tries the upgrader says that the update now is not 300mb but is full and is 2gigs, so i think is the time.. but no. so i tried to force the update with 3 buttons recovery dload method but it doesn't work at all 5% at every try. so i searched for support and i found that the ota connot be installed on unlocked devices, so i tried to relock my bootloader with oem relock and the unlock number but it says root type is risk... so i can't even relock my bootloader.. other says that i have to install to relock or can relock... but is b381 the stock? or they instend the mm version? i don't remember what version p9 lite ships. i tried to flash imgs through fastboot but even if i flash system and boot of the b389 the system boot and the info are of the b381, unisatlling app system crash, so i restored my previous backup made through twrp recovery, i immidiatly noticed that the huawei boot animations was gone and was an android stock animation. i thinked it was fine and all was working properly, i give up o upgrade and i was fine but sad. after few hours i tried to make a paper copy with my printer that have nfc but my phone keep shows and hide nfc symbol like on off on off on off over and over even after reboot, after a call i understand that the audio doesn't was working, every type of audio not work even the mic. i don't see any other problems but without sounds is unusable as a phone or mulimedia things... sorry for bad english please HELP i tried all i founded ...
Franseven said:
Hi i was on l-31c432b381 firmware with emui 5.0 and android 7.0, i have unlocked the bootloader for install magisk 12.0 and have root permissions, after months i saw an update for my phone (b389) so i tried to upgrade but i had twrp so error 1 or 7, i flashed the stock recovery, redowload the update and the install failed at 5%, so i tried to unistall magisk before update, but nothing it wont update, after few tries the upgrader says that the update now is not 300mb but is full and is 2gigs, so i think is the time.. but no. so i tried to force the update with 3 buttons recovery dload method but it doesn't work at all 5% at every try. so i searched for support and i found that the ota connot be installed on unlocked devices, so i tried to relock my bootloader with oem relock and the unlock number but it says root type is risk... so i can't even relock my bootloader.. other says that i have to install to relock or can relock... but is b381 the stock? or they instend the mm version? i don't remember what version p9 lite ships. i tried to flash imgs through fastboot but even if i flash system and boot of the b389 the system boot and the info are of the b381, unisatlling app system crash, so i restored my previous backup made through twrp recovery, i immidiatly noticed that the huawei boot animations was gone and was an android stock animation. i thinked it was fine and all was working properly, i give up o upgrade and i was fine but sad. after few hours i tried to make a paper copy with my printer that have nfc but my phone keep shows and hide nfc symbol like on off on off on off over and over even after reboot, after a call i understand that the audio doesn't was working, every type of audio not work even the mic. i don't see any other problems but without sounds is unusable as a phone or mulimedia things... sorry for bad english please HELP i tried all i founded ...
Click to expand...
Click to collapse
Hi, my english is bad too , B389 is an OTA update, its impossible upgrade via fstboot or via TWRP (error 7). IMO the right way to fix your problems - downgrade to MM , then back to Nougat etc. (remove pattern Lock , Fingerprint lock, root etc. before installing downgrade). It will erase all your phone data!!!
Download official rollback package for your VNS-L31C432
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and download MM firmware VNS-L31C432B161 (Single SIM)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66022/f1/full/update.zip
1) Create a new folder dload in root directory of SD card (root directory : it means dont put it in any folder .) Now unpack the rollback package and copy its contents “UPDATE.APP” to the “dload” folder. Use the 3 button combo installation. After your firmware version should now be on “B300” or "test-keys".
2) Remove from dload folder rollback package, extract the ZIP file with MM firmware to the dload folder and use 3 combo button installation.
Or you can use this method : on your phone launch the phone dialer app and dial *#*#2846579#*#*. Next, select Project Menu – > Software upgrade – > SDcard upgrade – > and confirm the flashing process that is about to be initiated.
Good luck!
bozka1 said:
Hi, my english is bad too , B389 is an OTA update, its impossible upgrade via fstboot or via TWRP (error 7). IMO the right way to fix your problems - downgrade to MM , then back to Nougat etc. (remove pattern Lock , Fingerprint lock, root etc. before installing downgrade). It will erase all your phone data!!!
Download official rollback package for your VNS-L31C432
http://download-c1.huawei.com/download/downloadCenter?downloadId=93789&version=373429&siteCode=sk
and download MM firmware VNS-L31C432B161 (Single SIM)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1164/g104/v66022/f1/full/update.zip
1) Create a new folder dload in root directory of SD card (root directory : it means dont put it in any folder .) Now unpack the rollback package and copy its contents “UPDATE.APP” to the “dload” folder. Use the 3 button combo installation. After your firmware version should now be on “B300” or "test-keys".
2) Remove from dload folder rollback package, extract the ZIP file with MM firmware to the dload folder and use 3 combo button installation.
Or you can use this method : on your phone launch the phone dialer app and dial *#*#2846579#*#*. Next, select Project Menu – > Software upgrade – > SDcard upgrade – > and confirm the flashing process that is about to be initiated.
Good luck!
Click to expand...
Click to collapse
Ok i'm posting in real time now. i'm copy update.app in dload folder (rollback)
it have completed ... wow
same android boot animation, the version says is nrd90m test keys (still no audio)
now i'm copying full mm firmware
its installing 40% i'm loving you.. 50% 60% 70%80%90% SUCCESS
user reset... OK
huawei boot animation with audio!!!!!!!!!!!!!!! and there is not unlocked text like (......can't be trusted...)
ok wifi connected skip.skip skip.... start
song... AUDIO WORKING
recording, its working, nfc ok
i'm on b161 and it shows update, now, can i update to the latest version?
THANK YOU SO MUCH
Franseven said:
Ok i'm posting in real time now. i'm copy update.app in dload folder (rollback)
it have completed ... wow
same android boot animation, the version says is nrd90m test keys (still no audio)
now i'm copying full mm firmware
its installing 40% i'm loving you.. 50% 60% 70%80%90% SUCCESS
user reset... OK
huawei boot animation with audio!!!!!!!!!!!!!!! and there is not unlocked text like (......can't be trusted...)
ok wifi connected skip.skip skip.... start
song... AUDIO WORKING
recording, its working, nfc ok
i'm on b161 and it shows update, now, can i update to the latest version?
THANK YOU SO MUCH
Click to expand...
Click to collapse
Yes, you can. Via OTA, or you can use TWRP (Meticulus 3.0.2.0 only ! ) and flash both .zip files. You must download two files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80474/f1/full/update.zip
and
http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_VNS-L11_hw_eu.zip.
In TWRP set Install, then select memmory SD card, and klick on
update.zip, confirm installation. After, STAY in TWRP, go back to Install, find file ...hw_eu....zip , confirm installation. Then select rebot system. Done!
bozka1 said:
Yes, you can. Via OTA, or you can use TWRP (Meticulus 3.0.2.0 only ! ) and flash both .zip files. You must download two files:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80474/f1/full/update.zip
and
http://update.hicloud.com:8180/TDS/...-L11_hw_eu/update_data_full_VNS-L11_hw_eu.zip.
In TWRP set Install, then select memmory SD card, and klick on
update.zip, confirm installation. After, STAY in TWRP, go back to Install, find file ...hw_eu....zip , confirm installation. Then select rebot system. Done!
Click to expand...
Click to collapse
i've done b371 thrugh updater now it doesn't show newer versions but i'm using b389 dload and it should go ok right? (full b389 update.app)
Franseven said:
i've done b371 thrugh updater now it doesn't show newer versions but i'm using b389 dload and it should go ok right? (full b389 update.app)
Click to expand...
Click to collapse
Try it, but I think, you will get a message "not compatible" . Via dload its impossible, IMO use rather Huawei firmware finder or wait for OTA update.
bozka1 said:
Try it, but I think, you will get a message "not compatible" . Via dload its impossible, IMO use rather Huawei firmware finder or wait for OTA update.
Click to expand...
Click to collapse
yes it failed with b389 dload full
i'm on b371, i've to download and flash manually the b381 and after b389? where i can find otas?
Franseven said:
yes it failed with b389 dload full
i'm on b371, i've to download and flash manually the b381 and after b389? where i can find otas?
Click to expand...
Click to collapse
If I said, it's impossible manually update to 381 or 389 using OTA firmware, trust me . Try Firmware finder. GL!
bozka1 said:
If I said, it's impossible manually update to 381 or 389 using OTA firmware, trust me . Try Firmware finder. GL!
Click to expand...
Click to collapse
i tried full ota (firmware finder) flashes from twrp but gives error 7
e:unknown command [errno]
update_huawei_pkg_from_ota_zip: failed
Franseven said:
i tried full ota (firmware finder) flashes from twrp but gives error 7
e:unknown command [errno]
update_huawei_pkg_from_ota_zip: failed
Click to expand...
Click to collapse
https://m.youtube.com/watch?v=s5hHTZ4LGMM
bozka1 said:
https://m.youtube.com/watch?v=s5hHTZ4LGMM
Click to expand...
Click to collapse
it worked with the dns method not the proxy (was keeping redownload infinite patch over 4gigs tot crazy)
i'm now back at b381 with sound but without my data, i'm trying to reach b389 and over, can i restore through twrp only data partition without a hitch?
in b389 emui is 5.0.1 if i remember right. its data compatible? are the data the cause of no sound? thanks
ALL WORKED FINE , ALL SOLVED. currently b391 (latest) emui 5.0.1 and all my data, super happy thank you
2EDIT: nfc chip still not work, when selected emui crash. minor problem..
note: twrp by (that you said) didn't work in emui 5+ i'm using newer revolution based one twrp 3.03
Franseven said:
it worked with the dns method not the proxy (was keeping redownload infinite patch over 4gigs tot crazy)
i'm now back at b381 with sound but without my data, i'm trying to reach b389 and over, can i restore through twrp only data partition without a hitch?
in b389 emui is 5.0.1 if i remember right. its data compatible? are the data the cause of no sound? thanks
ALL WORKED FINE , ALL SOLVED. currently b391 (latest) emui 5.0.1 and all my data, super happy thank you
2EDIT: nfc chip still not work, when selected emui crash. minor problem..
note: twrp by (that you said) didn't work in emui 5+ i'm using newer revolution based one twrp 3.03
Click to expand...
Click to collapse
FF works with proxy fine, but you must first download and install Firmware finder proxy apk. On Nougat use TWRP 3.1.0-2.
---------- Post added at 21:03 ---------- Previous post was at 20:59 ----------
Franseven said:
it worked with the dns method not the proxy (was keeping redownload infinite patch over 4gigs tot crazy)
i'm now back at b381 with sound but without my data, i'm trying to reach b389 and over, can i restore through twrp only data partition without a hitch?
in b389 emui is 5.0.1 if i remember right. its data compatible? are the data the cause of no sound? thanks
ALL WORKED FINE , ALL SOLVED. currently b391 (latest) emui 5.0.1 and all my data, super happy thank you
2EDIT: nfc chip still not work, when selected emui crash. minor problem..
note: twrp by (that you said) didn't work in emui 5+ i'm using newer revolution based one twrp 3.03
Click to expand...
Click to collapse
FF works with proxy , but you must download and install Firmware finder proxy apk. On Nougat use TWRP 3.1.0-2.
OMG, sorry !
Hi, I will show you the most easiest way to get oreo update (emui 8).
you must have installed twrp and unlocked bootloader.
1. Download this https://forum.xda-developers.com/honor-8/development/tool-srk-tool-huawei-bootloader-root-t3470823
2. Press 7 then 9, next 7 and 5.
3. Now download 2 files: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1276/g104/v64076/f1/full/update.zip thanks to @jithendrav83
https://www.hihonor.com/uk/support/details/index.html?DOC_ID=92135 <- first
4. flash it by dload method
thats all. Now update your phone by huawei built-in updater or firmware finder.
But for me the best option is unlocking bootloader again, root then flashing by this tutorial: https://forum.xda-developers.com/honor-8/how-to/guide-flashing-unapproved-firmwares-t3668306
(method 2)
VIDEO OF EMUI 8 ON HONOR 8:
https://www.youtube.com/watch?v=VVe9gsyVxd0&feature=youtu.be
As you wrote, then the update will wait forever.
At this location you can, because. on the Russian version in the folder "cust" is your region. I recommend that you visit the Russian forum 4PDA.RU
Hi,
Would this work on Honor 8 single Sim device (I've FRD-L02)?
[email protected] said:
Hi,
Would this work on Honor 8 single Sim device (I've FRD-L02)?
Click to expand...
Click to collapse
Yes. You can rebrand L02, L04 to L09 without any issues.
hackslash said:
Yes. You can rebrand L02, L04 to L09 without any issues.
Click to expand...
Click to collapse
Are you sure? He can lost his cellular connection and IMEI.
WYPIERDAALAAC said:
Are you sure? He can lost his cellular connection and IMEI.
Click to expand...
Click to collapse
As per my guide, you only lose it if you're rebranding to AL/DL (chinese). Rebranding from L02, L04 to L09 is perfectly safe (I'm running L09C10 on my L04)
So best way to get Oreo on L04 is to rebrand with this method and redlotus to the Russian EU firmware and everything will work?
Hi,
I rebranded FRD-L02 to FRD-L19C10 and tried above steps. Installed Oreo by redlotus method. But got "data corrupted" menu and I formatted data. Now phone won't boot. Then I tried unlocking bootloader and phone booted. But sw version still shows B95 and its on Oreo. Looks like cust/region part is not flashed. Tried installing Twrp 3.2.1.0 and the one in Multi-tool, but phone won't boot to recovery. Its going into error mode. Any suggestions appreciated. Thanks.
[email protected] said:
Hi,
I rebranded FRD-L02 to FRD-L19C10 and tried above steps. Installed Oreo by redlotus method. But got "data corrupted" menu and I formatted data. Now phone won't boot. Then I tried unlocking bootloader and phone booted. But sw version still shows B95 and its on Oreo. Looks like cust/region part is not flashed. Tried installing Twrp 3.2.1.0 and the one in Multi-tool, but phone won't boot to recovery. Its going into error mode. Any suggestions appreciated. Thanks.
Click to expand...
Click to collapse
If you look at the XML File you used for the RedLotus method, you can see that there are two versions in it (L09C10 and L19C10). I suppose that's the reason why it's bugging for you.
Don't know for sure though. Trying that method now too, will report back if that's really the problem.
I dont have windows pc but Mac. How can I rebrand?
[email protected] said:
Hi,
I rebranded FRD-L02 to FRD-L19C10 and tried above steps. Installed Oreo by redlotus method. But got "data corrupted" menu and I formatted data. Now phone won't boot. Then I tried unlocking bootloader and phone booted. But sw version still shows B95 and its on Oreo. Looks like cust/region part is not flashed. Tried installing Twrp 3.2.1.0 and the one in Multi-tool, but phone won't boot to recovery. Its going into error mode. Any suggestions appreciated. Thanks.
Click to expand...
Click to collapse
Why redlotus? Do it as in tutorial. Download three packages then flash by tutorial in my thread.(link is there). I meant flashing by modified Huawei recovery.
spica1234 said:
I dont have windows pc but Mac. How can I rebrand?
Click to expand...
Click to collapse
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
hackslash said:
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
Click to expand...
Click to collapse
Gr8, thank you
WYPIERDAALAAC said:
Why redlotus? Do it as in tutorial. Download three packages then flash by tutorial in my thread.(link is there). I meant flashing by modified Huawei recovery.
Click to expand...
Click to collapse
bro you best way but me amature
please send link to me
FRD_HWOTA8_ALLINONE.zip this file in 4pda but i cant to download
please please please
WYPIERDAALAAC said:
Why redlotus? Do it as in tutorial. Download three packages then flash by tutorial in my thread.(link is there). I meant flashing by modified Huawei recovery.
Click to expand...
Click to collapse
Doesn't work for me. Always results in a bootloop with "Your device is unlocked..." etc.
Same with RedLotus too. I don't know if it's the firmware you linked or the recoveries, but ehh... nah, probably gonna go back to where I was before.
hackslash said:
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
Click to expand...
Click to collapse
Step 3. Download latest naugat 3 files for L09C10. Means last naugat that was released right before oreo in FF.
Dont i need marshmallow 3 files?
Naugat filez will work?
spica1234 said:
Step 3. Download latest naugat 3 files for L09C10. Means last naugat that was released right before oreo in FF.
Dont i need marshmallow 3 files?
Naugat filez will work?
Click to expand...
Click to collapse
Not Marshmallow.
Yes, last Nougat released for C10.
Hi,
Can anyone share working TWRP for Oreo? Thanks.
[email protected] said:
Hi,
Can anyone share working TWRP for Oreo? Thanks.
Click to expand...
Click to collapse
I tried out some of the EMUI 8 TWRP's that I could find but none works for the Honor 8 yet.
Would be grateful for a working one too.
hackslash said:
To rebrand, you need an unlock bootloader.
1. Download the C10 oeminfo file https://drive.google.com/file/d/1VtOeGQ9GnKvcSVgraPP6-go6HCRbpyBB/view?usp=drivesdk. It is a zip file, extract it to find an img file. Reboot to TWRP and select Install Image and install the file to oeminfo partition.
2. Perform a complete factory reset in TWRP.
3. Download the latest Nougat (3 files package) for FRD-L09C10 through Firmware Finder. Flash it using HuRupdater https://forum.xda-developers.com/ho...l-flash-official-firmware-recovery-t3769279/.
4. After the flash is complete, reboot the device, unlock the bootloader again and flash TWRP.
5. Download the latest Oreo build for FRD-L09C10 through Firmware Finder. Using HuRupdater flash the three Oreo firmware files. Don't perform a factory reset this time.
6. Reboot your device. You're now on Oreo.
Click to expand...
Click to collapse
Just to be clear, since I prefer not to f this up...this will pretty much let me rebrand from FRD-L04 without the need for a computer correct? Also these step you've laid out don't require any of the steps posted in the OP?
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 3 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
ceriqdesign said:
Hi all,
I just want to share with you all how i solved NRD90M test-keys on my Mate 8. 2 weeks ago, I've successful to debrand from L29 to AL10 and updated to Oreo EMUI 8. After awhile, i found bugs or error when i connected to PC or Laptop, my phone will go haywire like someone is touching the screen everywhere. I suspected it might be came from cust.img that i flashed to make sim and data detect.
Then i made a decision to debrand again to DL00, and successfully rollback to MM B386 using Hisuite version 8. After that i flashed dualcu_cn.zip using TWRP and successful to debrand to DL00. I checked the OTA update, there is DL00C00B577 Nougat update and i download and installed it. My Mate 8 became NRD90M test-keys after successfully updated to Nougat. For one and a half day i searched in internet and XDA on how to get rid of NRD90M test-keys and update to next build of Nougat. On XDA, I've found several thread regarding NRD90M test-keys like https://forum.xda-developers.com/mate-8/general/info-rom-nrd90m-test-keys-android-7-0-t3750147, https://forum.xda-developers.com/mate-8/help/nrd90m-test-keys-t3549124 and https://forum.xda-developers.com/mate-8/help/stuck-nrd90m-test-keys-t3590461 but without proper steps and procedures. So people like me a noob or newbies will stuck on how to solve the problem. So I've do some test for my Mate 8 by using one of this methods which are HuRUpdater, HWOTA and erecovery. I can said that 90% of chances rate it will success but you'll need to download FullOTA-MF stock firmware. I'm using erecovery so no need to download it.
Requirement:
1. Unlocked bootloader
2. TWRP Installed
3. HuRUpdater - Link : https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
4. HWOTA - Link: https://cloud.mail.ru/public/DEWc/a9fDVbgpz
5. update.zip - FullOTA-MF (for me NXT-DL00C17B592-full in erecovery)
6. update_all_hw.zip
7. update_data_public.zip
8. Back up your data using HiSuite or SD card.
Instruction
Method 1 using HuRUpdater
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HuRUpdater.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Make a new folder in SD Card root (you can name it base on its firmware) and put all the zips that you already downloaded in the folder.
4. Boot your Mate 8 to TWRP and choose sd card > folder > HuRUpdater.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Method 2 using HWOTA
1. Make sure your bootloader is unlocked and TWRP is installed.
2. Download HWOTA.zip, update.zip-FullOTA-MF (your stock firmware), update_all_hw.zip and update_data_public.zip.
3. Extract HWOTA.zip into HWOTA folder in your PC and put all the zips that you already downloaded in that folder. Copy HWOTA folder in your SD Card.
4. Boot your Mate 8 to TWRP and choose HWOTA folder and select nxt_hwota_update.zip. It'll reboot into recovery and start flash firmware.
5. Your phone will update to the newest build number base on your stock firmware.
6. You can follow the steps in this link https://forum.xda-developers.com/mat...ate-8-t3785320. This HWOTA.zip also can use to flash OREO EMUI 8 firmware.
P/S: I think HuRUpdater and HWOTA is the same method but using different script binary.
Method 2 using eRecovery
1. Press Vol + and Power button at the same time for 3-5 sec.
2. Choose your WIFI (need strong connection), if not it will failed to download recovery firmware.
3. If your WIFI have a strong connection it'll start to download recovery firmware and install.
4. Wait until finish installation
5. Your phone will update to the newest build number base on your stock firmware.
P/S: If you're using C636,C432,C185, i think it's useless. because i'm from C636 it's never captured the recovery firmware. so in case if your phone bricked or test keys, you can use HuRUpdater method. This method only working on chinese variants is what i think.
Additional info:
DESCRIPTION FOR FIRMWARE
1- OTA Firmware: (Over The Air) That mean the update file can install on the available os and upgrade or fix some bugs. (if the update build number is compatible with your phone).
2- FullOTA: Full OTA firmware is Full package of firmware and it can unbrick your phone.
3- FullOTA-MF: Full OTA MF firmware is Full package of firmware and it can unbrick your phone model with any buid number.
4- FullOTA-PV: Full OTA PV firmware is a Point-Version firmware, which means it can unbrick your phone depend on build number.
5- OTA-PV: Point-Version, such firmware are designed to update from one version of android to another. (build number is important)
6- OTA-MF: MF is a multi-file firmware, which means that there are several update packages in it.
Source : http://huawei-firmware.com/pages/ext/a/description/index.html
All thanks goes to @zxz0O0 for HurUpdater.zip, @apat26 for his thread HWOTA, 4pda forum and Huawei community.
Click to expand...
Click to collapse
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
manuele16 said:
hello, in the meantime I thank you my mate8 is much improved the only problem is that I am still in NRD90M test-keys.
Click to expand...
Click to collapse
are you using HuRUpdater method?can you give me more info about your mate 8
ceriqdesign said:
are you using HuRUpdater method?can you give me more info about your mate 8
Click to expand...
Click to collapse
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
manuele16 said:
Of course...
Model number: NXT
No. Series: NRD90M Test Keys
Emui: 5.0
Android: 7.0
Vendor: hw
Country: meafnaf
please consider that my goal is to make it NXT-L29C432.
Originally on the box is reported NXT-AL10
Click to expand...
Click to collapse
So originally you came from NXT-AL10 and without changing oeminfo with SRK Tool then you used the HuRUpdater?
Is it your bootloader still unlocked or locked?
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
I managed to get Vendor: hw and Country: eu.
but I'm still in nrd90
manuele16 said:
I did not change oeminfo, or rather I tried with SRK tool, but I did not succeed.
Yes, I used HuRUpdater.
Bootloader unlocked
Click to expand...
Click to collapse
Yup no wonder you're on NRD90M..you need to change oeminfo first before flash c432 firmware..
TWRP Huawei mate 8
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
riky26 said:
Hello, my people, how are you?
I have a doubt, the truth is I am very new in this.
I have a Huawei Mate 8 NXT-L29 which updates to Android 7 with an app called "Firmware Finder for Huawei" and then I started my problems, the clock does not work, I can not enter the updater among others. What I would like is to change that rom for another or if it were for a stock.
I have the bootloader open and a TWRP (twrp-3.2.3-0-next) which is the only one that has worked for me but I have not been able to install another rom it tells me this: "error when dismounting" / '/ cust /' (invalid argument) and I do not know what I'm doing wrong ...
the compilation that this app left me is: NRD90M test-keys
and the rom that I want to install is: NXTL26C605B580
I would like to know your recommendations and corrections to what I am doing and thank you and I apologize for my English, which is very bad!
Click to expand...
Click to collapse
Sorry for late reply as for now i'm quite busy with life..can you tell me what your model before you change to NXTL26C605B580?