Database Users

Huawei P8 Lite Bootloop (cant enter fastboot// can enter huawei recovery) (B188)

Well. I recently hard resetted my phone and rooted it via KingRoot (unlocked bootloader) because i was too lazy to use twrp again. Then i downloaded SuperSu me and replaced kingroot with supersu. Everything working fine. Then i updated the binaries and as the popup said i restarted my phone, but now Im stuck in a bootloop... Already tried to wipe cache and do a factory reset, both didnt work. I can enter the Huawei Recovery, but i cant enter fastboot.
Please help.
//Update
Fixed it with the help of AmINoS007
If literally nothing works, download a higher version Stock firmware than the one you had before. Copy it on your sd card into dload (Only one Update.App at the time) and press vol up + vol down + power button and wait for it to boot up the recovery, it should do everything on its own then. If it cancels just do it again. (Worked for me with the third try)

it's weired that you can't enter fastboot
but since you have the stock recovery why don't you try then restore your phone with the hisuite tool via laptop ?
otherwise juste plug in your phone with your cable to the pc and press the 3 buttons together ( power , vol- , vol+ ) and make sure you have internet connexion on your pc and the phone will donwload a new firmware and install and shabam your phone is alive again

Didnt know that! Thanks

AmINoS007 said:
it's weired that you can't enter fastboot
but since you have the stock recovery why don't you try then restore your phone with the hisuite tool via laptop ?
otherwise juste plug in your phone with your cable to the pc and press the 3 buttons together ( power , vol- , vol+ ) and make sure you have internet connexion on your pc and the phone will donwload a new firmware and install and shabam your phone is alive again
Click to expand...
Click to collapse
Tried it twice, both times it stucks at 90%...

you'r welcome
stuck for how long ?? bcz I think you should wait a little sometimes it can be stuck for 20-30 min so juste be patient

AmINoS007 said:
you'r welcome
stuck for how long ?? bcz I think you should wait a little sometimes it can be stuck for 20-30 min so juste be patient
Click to expand...
Click to collapse
ive been waiting for 15 Minutes the second time. Ill give it a try ^^

.Phoenix. said:
ive been waiting for 15 Minutes the second time. Ill give it a try ^^
Click to expand...
Click to collapse
wait even for 1h to make sure that it is a booloap or not
good luck

AmINoS007 said:
wait even for 1h to make sure that it is a booloap or not
good luck
Click to expand...
Click to collapse
More than 4 Hours at 90%, still running. Im pretty sure it doesnt work x)

Still no clue what to do.

Damn
Did you try pluggin the phone with usb câble into laptop and pressing power Button and vol - Button ? If this get's you into bootloader mod I can help you then restoring your phone back

AmINoS007 said:
Damn
Did you try pluggin the phone with usb câble into laptop and pressing power Button and vol - Button ? If this get's you into bootloader mod I can help you then restoring your phone back
Click to expand...
Click to collapse
Tried it with it plugged in and plugged out. Both didnt work. :/

I see you only have one last chance, you need to manage to install TWRP and I Will give you a rom flashabale via it then your phone Will be back to life again

AmINoS007 said:
I see you only have one last chance, you need to manage to install TWRP and I Will give you a rom flashabale via it then your phone Will be back to life again
Click to expand...
Click to collapse
Thats the problem, i cant use fastboot... Wasnt there something with placing a stock rom on an sd card in dload and then flash it via huawei recovery?

Yes there is if you are on lolipop download ?* lolipop version then else if marshmallow download ?* marshmallow rom and extract the update.app and put it in dload folder in the sd card then close the phone and press the 3 buttons together and it Will install

AmINoS007 said:
Yes there is if you are on lolipop download ?* lolipop version then else if marshmallow download ?* marshmallow rom and extract the update.app and put it in dload folder in the sd card then close the phone and press the 3 buttons together and it Will install
Click to expand...
Click to collapse
Im gonna try it, but i dont have any sd card adapter x) Im gonna borrow one and see if it works, thanks!

You'r welcome men, good luck ! :highfive:

AmINoS007 said:
You'r welcome men, good luck ! :highfive:
Click to expand...
Click to collapse
Deleted the dload folder and added a new one with a fresh stock firmware... 'Software install failed'
I dont know what to do now, nothing works. Literally nothing

AmINoS007 said:
You'r welcome men, good luck ! :highfive:
Click to expand...
Click to collapse
What should i do now? I cant simply buy a new phone... Are there shops who do it?

Which firmware version do you have and which firmware version did you try to install ??

AmINoS007 said:
Which firmware version do you have and which firmware version did you try to install ??
Click to expand...
Click to collapse
I was on B188, tried to install B170. Worked with Fastboot

Help me! ZTE Axon 7 is in EDL Mode!

I have unlock the bootloader of my zte axon 7 A2017U and during the process it was bricked
now i am in EDL mode, bootloader unlocked, the phone won't turn on, no rom, idk if there is a recovery, fastboot & adb won't recognize the phone, from what i have understand i need to install qualcomm drivers and idk how to do that pls help!!
i just want to get to "brand new phone" state
thank you for future help :fingers-crossed::fingers-crossed:

Just press and hold power till turns back on

DrakenFX said:
Just press and hold power till turns back on
Click to expand...
Click to collapse
The phone dosn't turn on i have pressed for over a minuite now.. again there is no rom ,maybe no recovery and need to flash qualcomm's drivers

erano067 said:
I have unlock the bootloader of my zte axon 7 A2017U and during the process it was bricked
now i am in EDL mode, bootloader unlocked, the phone won't turn on, no rom, idk if there is a recovery, fastboot & adb won't recognize the phone, from what i have understand i need to install qualcomm drivers and idk how to do that pls help!!
i just want to get to "brand new phone" state
thank you for future help :fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Can't you use this http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204 to get TWRP running and then use http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 to get the rom back?

tabletalker7 said:
Can't you use this http://forum.xda-developers.com/axon-7/development/wip-axon-7-root-bootloader-unlokced-t3441204 to get TWRP running and then use http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484 to get the rom back?
Click to expand...
Click to collapse
I have tried that, and it won't go to twrp, although this is the result from cmd:
D:\Downloads\New folder>axon7root.exe -p COM3 -b -r
Copyright @tenfar [email protected]
Version 1.10
Sengding the horse
Waiting the horse to alive
boot = D:\Downloads\New folder\boot.img
recovery = D:\Downloads\New folder\recovery.img
Connected to device, rooting
Writing boot.img success
Writing recovery.img success
Device Rooted!
Hold Volume Up + Power key to reboot to the twrp recovery
Hold Power key to reboot to the system,but twrp will be restore to stock.
So recommanded to boot into twrp first
Program close countdown:10 9 8 7 6 5 4 3 2 1

erano067 said:
I have tried that, and it won't go to twrp, although this is the result from cmd:
D:\Downloads\New folder>axon7root.exe -p COM3 -b -r
Copyright @tenfar [email protected]
Version 1.10
Sengding the horse
Waiting the horse to alive
boot = D:\Downloads\New folder\boot.img
recovery = D:\Downloads\New folder\recovery.img
Connected to device, rooting
Writing boot.img success
Writing recovery.img success
Device Rooted!
Hold Volume Up + Power key to reboot to the twrp recovery
Hold Power key to reboot to the system,but twrp will be restore to stock.
So recommanded to boot into twrp first
Program close countdown:10 9 8 7 6 5 4 3 2 1
Click to expand...
Click to collapse
Hold on there,
- When you unplug your device and press & hold Power it does NOT turn on? and still just black screen?
- Only Turns on straight to EDL when you plug it in using your PC/Laptop
if both are correct you better off, doing a RMA, why that's my final answer?, cuz i had the same problem and couldn't fix it and there's NO tool yet to fix for this type of brick.
Sorry pal,

DrakenFX said:
Hold on there,
- When you unplug your device and press & hold Power it does NOT turn on? and still just black screen?
- Only Turns on straight to EDL when you plug it in using your PC/Laptop
if both are correct you better off, doing a RMA, why that's my final answer?, cuz i had the same problem and couldn't fix it and there's NO tool yet to fix for this type of brick.
Sorry pal,
Click to expand...
Click to collapse
It have a black screen all the time(pluged to laptop,pressed power button no matter what i do) even no vibration, pls think of something else!:fingers-crossed::fingers-crossed:

erano067 said:
It have a black screen all the time(pluged to laptop,pressed power button no matter what i do) even no vibration, pls think of something else!:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
sorry pal, like i said before you need to send to ZTE for repair (RMA) you have ZTE Passport Warranty , do a RMA is the only way for now to get it fix.

erano067 said:
It have a black screen all the time(pluged to laptop,pressed power button no matter what i do) even no vibration, pls think of something else!:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Same thing happened to me a little over a month ago - must send it back to ZTE. RMA is the only way

tabletalker7 said:
Same thing happened to me a little over a month ago - must send it back to ZTE. RMA is the only way
Click to expand...
Click to collapse
Did they charge you for it? and if so how much?

erano067 said:
Did they charge you for it? and if so how much?
Click to expand...
Click to collapse
I made sure I had my backups restored (stock boot and stock recovery from axon7backup) and I only paid ten bucks for an upgrade to express return shipping

erano067 said:
I have tried that, and it won't go to twrp, although this is the result from cmd:
D:\Downloads\New folder>axon7root.exe -p COM3 -b -r
Copyright @tenfar [email protected]
Version 1.10
Sengding the horse
Waiting the horse to alive
boot = D:\Downloads\New folder\boot.img
recovery = D:\Downloads\New folder\recovery.img
Connected to device, rooting
Writing boot.img success
Writing recovery.img success
Device Rooted!
Hold Volume Up + Power key to reboot to the twrp recovery
Hold Power key to reboot to the system,but twrp will be restore to stock.
So recommanded to boot into twrp first
Program close countdown:10 9 8 7 6 5 4 3 2 1
Click to expand...
Click to collapse
Sound like the bootloader is hosed. And i am going to assume you have the A2017U (US version) since u still end up in EDL and not DFU? How did you unlock you BL or how did it fail?

peramikic said:
Sound like the bootloader is hosed. And i am going to assume you have the A2017U (US version) since u still end up in EDL and not DFU? How did you unlock you BL or how did it fail?
Click to expand...
Click to collapse
I ended up in a black screen and the phone won't turn on, i assume i'm in EDL mode, i was able to unlock the bootloader soccessfully but after messing around a little too mouch it has come to this state..

erano067 said:
I ended up in a black screen and the phone won't turn on, i assume i'm in EDL mode, i was able to unlock the bootloader soccessfully but after messing around a little too mouch it has come to this state..
Click to expand...
Click to collapse
you unlocked the bootloader? I doubt you can make a RMA claim now

tabletalker7 said:
you unlocked the bootloader? I doubt you can make a RMA claim now
Click to expand...
Click to collapse
if he did an UNOFFICIAL Unlock he can, there is no way for them to check if bootloader was unlock...specially if the device is in the condition it is now.

DrakenFX said:
if he did an UNOFFICIAL Unlock he can, there is no way for them to check if bootloader was unlock...specially if the device is in the condition it is now.
Click to expand...
Click to collapse
You know ...... They never figured out what happened to mine - after two days they gave up and replaced the phone.

hold down power and volume down button at same time for a few seconds...

Guys this happened to me and I called ZTE and made a repair claim I did not unlock bootloader so I hope I'm ok and they can replace it

Jocutz1987 said:
Guys this happened to me and I called ZTE and made a repair claim I did not unlock bootloader so I hope I'm ok and they can replace it
Click to expand...
Click to collapse
It would be beneficial to know what steps lead up to this failure.
I'm considering importing this phone and to RMA could be quiet costly (delivery costs).

tmxda said:
It would be beneficial to know what steps lead up to this failure.
I'm considering importing this phone and to RMA could be quiet costly (delivery costs).
Click to expand...
Click to collapse
I said there was a failure when it was updating software I got soft brick but no unlock bootloader they pay for shipping read the warranty passport 2.0 when you have a chance but short info it has to meet warranty criteria and if it's repairs you have to pay for repair cost if you Dont want to pay for repair cost they will send it back the way they received it. It take about two weeks for the process and they're in Dallas tx.

Requesting Assistance with Bricked P8 Lite

Hello, I m battling this problem already 2 days, I have P8 Lite mobile phone.
Phone Originally came with ALE-L21 C432B132 but at that time I got update ALE-L21 C432B188 what made my phone 5.0.1 Android
So a few days ago I received Update ALE-L21 C432B587 in updater but what happened is the update stuck on 1 % then showed Error message
That I cant Install that and Phone Rebooted. And it stuck on the First LOGO and now the fun part starts.
I read Every single post, guide what was on google all Suggested to use fastboot and just Flash back to my Original ALE .
Ok, so I did all the Phone Unlocking by getting unlock code and then using fastboot to unlock the phone now my phone is unlocked and it shows that when I'm in fastboot.
I also put UPDATE.app in SDcard just in case but thing is I cant Access that Update menu Or Recovery menu With Button UP + Power Only thing what Works is Fastboot
So I Extracted the boot, System, Recovery, cust, placed in adb folder and run the Cmd if I write fastboot devices it shows my phone so all is ok . and when I do all the flash commands nothings are failing and all shows that is completed. but still I can't start my phone and the only volume down + power works other combinations have no reaction + It just stands on that logo it doesn't even reboot how others have it
I let it send there for 1 h and it was just That first Logo.
So I'm writing here maybe someone has some Suggestion how to Resurrect my phone I'm open now to any suggestions.

Flash TWRP recovery
Then flash any ROM you want by TWRP
You can get the ROMs via "firmware finder" application, it's in play store..

Thank you for your Answer . I Tried to Install TWRP Recovery but without a luck Phone just stays on LOGO and Only button Combination Works is Volume Down + Power what Goes in Fast boot. Maybe i dont know how to enter TWRP mode however non of Huawei button presses worked. Maybe there is other way to get in that Recovery mode .. Also when i turn on phone and im in that LOGO my phone is not recognized by my PC , ONLY if i enter Fastboot i can See my Phone in Device manager and in CMD writing fastboot Devices. if i write adb devices it shows nothing .
also i have question does it mattare how i write : fastboot flash boot boot.img because if i write fastboot flash BOOT boot.img i cant flash it only if all letters are small it goes in .

Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.

Positivity_ said:
Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.
Click to expand...
Click to collapse
run twrp press vol plus and power and diconnect your phone from pc.

Adi5 said:
run twrp press vol plus and power and diconnect your phone from pc.
Click to expand...
Click to collapse
I just flashed TWRP3.0.2.img and Did what you told i got same Error what you can see in image. is that wrong twrp version?

try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, if recovery2 is not corrupted it should work. Good Luck

redknight65 said:
try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, it should work
Click to expand...
Click to collapse
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.

Positivity_ said:
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.
Click to expand...
Click to collapse
how long did you wait after the vibration?
---------- Post added at 21:30 ---------- Previous post was at 21:29 ----------
also try to flash recovery2

redknight65 said:
how long did you wait after the vibration?
Click to expand...
Click to collapse
at last 2 min or even more buttons are pressed nothing happens
Yes i flashed Recovery2 too with the ROM i flashed now still the same
I did Steps like in tutorials
Starting with lowest Version then flashing up Still nothing.

Positivity_ said:
at last 2 min or even more buttons are pressed nothing happens
Click to expand...
Click to collapse
try to flash recovery2 and do that again

redknight65 said:
try to flash recovery2 and do that again
Click to expand...
Click to collapse
I just did it again .. nop it still just vibrates and nothing is happening.

Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
then I can't help you, sorry

Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.

RootingPro-18 said:
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.
Click to expand...
Click to collapse
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same

Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
Click to expand...
Click to collapse
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same
Click to expand...
Click to collapse
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery

RootingPro-18 said:
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery
Click to expand...
Click to collapse
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.

Positivity_ said:
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.
Click to expand...
Click to collapse
Noooo, B611 is for single sim. B612 is for Dual.

RootingPro-18 said:
Noooo, B611 is for single sim. B612 is for Dual.
Click to expand...
Click to collapse
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?

Positivity_ said:
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/general/security-update-ale-l21c432b611-single-t3688441 from here you can get lastest vesions

Cant enter fastboot & recovery

Hello,
When I want to enter fastboot with vol down + plug usb in, phone goes to offline charging (light grey battery appears then goes to charging animation)
Here is what I did:
- Unlocked fastboot
- Fastboot flashed latest recovery from twrp: twrp-3.1.1-0-grace.img
and now I cant enter recovery nor fastboot. The only thing I can is boot to Android, but it is locked. Any suggestion how to enter fastboot?

Now I can enter fastboot, but still cant enter twrp. Flashed different images, no change
EDIT: By holding vol up + pow button I enter Huawei eRecovery with options reboot, dowload new version and recovery and shutdown. What does that mean?

LGaljo said:
Now I can enter fastboot, but still cant enter twrp. Flashed different images, no change
EDIT: By holding vol up + pow button I enter Huawei eRecovery with options reboot, dowload new version and recovery and shutdown. What does that mean?
Click to expand...
Click to collapse
For entering into FASTBOOT mode you must have a USB cable plugged into a PC. To enter into TWRP, after flashing it you must write te command fastboot reboot, unplug the cable immediately and hold the volume up button.

erayrafet said:
For entering into FASTBOOT mode you must have a USB cable plugged into a PC. To enter into TWRP, after flashing it you must write te command fastboot reboot, unplug the cable immediately and hold the volume up button.
Click to expand...
Click to collapse
Thanks for reply.
Did like you said: flashed recovery then rebooted and immediately unplugged usb and started holding vol up. Phone was showing boot logo and rebooting itself. If I left finger off button, phone booted to OS.
IDK what I'm doing wrong here. BTW I'm using this recovery twrp-3.1.1-0-grace.img on https://eu.dl.twrp.me/grace/
Legit confused... Been doing this stuff for years and this happens :/

LGaljo said:
Thanks for reply.
Did like you said: flashed recovery then rebooted and immediately unplugged usb and started holding vol up. Phone was showing boot logo and rebooting itself. If I left finger off button, phone booted to OS.
IDK what I'm doing wrong here. BTW I'm using this recovery twrp-3.1.1-0-grace.img on https://eu.dl.twrp.me/grace/
Legit confused... Been doing this stuff for years and this happens :/
Click to expand...
Click to collapse
What's your build number?

erayrafet said:
What's your build number?
Click to expand...
Click to collapse
I dont know. I will ask my cousin when did she last time updated here phone

LGaljo said:
I dont know. I will ask my cousin when did she last time updated here phone
Click to expand...
Click to collapse
You can check in Settings, About phone section.

erayrafet said:
You can check in Settings, About phone section.
Click to expand...
Click to collapse
It's locked.

LGaljo said:
It's locked.
Click to expand...
Click to collapse
Is it on 6.0 and what's the model which you can see on the back of the phone.

erayrafet said:
Is it on 6.0 and what's the model which you can see on the back of the phone.
Click to expand...
Click to collapse
It's GRA-L09, but dont know which android version it has. If it helps you https://1drv.ms/f/s!AqJN5lbXo9tUg60gO2wQ2n3L9OnP9Q to guess which one it is

LGaljo said:
It's GRA-L09, but dont know which android version it has. If it helps you https://1drv.ms/f/s!AqJN5lbXo9tUg60gO2wQ2n3L9OnP9Q to guess which one it is
Click to expand...
Click to collapse
I can't access the file. Send a photo of the phone when the screen is on.

erayrafet said:
I can't access the file. Send a photo of the phone when the screen is on.
Click to expand...
Click to collapse
Strange. Tried it in incognito mode and worked (You might need to close window to login - picture is underneath). Will link them to this post in few minutes

Pictures in attachement

LGaljo said:
Pictures in attachement
Click to expand...
Click to collapse
So you are on Android 5.0.1, then you must find a compatible version of TWRP which has to be older than 3.0.0 or you can update to Android 6.0 with HiSuite, Firmware Finder via the eRecovery.

erayrafet said:
So you are on Android 5.0.1, then you must find a compatible version of TWRP which has to be older than 3.0.0 or you can update to Android 6.0 with HiSuite, Firmware Finder via the eRecovery.
Click to expand...
Click to collapse
Found this https://dl.twrp.me/p8/
Will it be okay?

LGaljo said:
Found this https://dl.twrp.me/p8/
Will it be okay?
Click to expand...
Click to collapse
Yes

erayrafet said:
Yes
Click to expand...
Click to collapse
Thanks bro! You saved my life. That little thing kept me from doing that! :highfive:
Will give you some thanks presses
EDIT: Now I know that phone has this firmware: GRA-L09C432B210

LGaljo said:
EDIT: Now I know that phone has this firmware: GRA-L09C432B210
Click to expand...
Click to collapse
Quite an old version, latest Stock ROM is build 399 AFAIK, I'm running it and phone is very stable, fast and good battery life.
IMHO well worth upgrading to it.
http://www.stechguide.com/huawei-p8-b399-marshmallow-update-2/

Sparkrite said:
Quite an old version, latest Stock ROM is build 399 AFAIK, I'm running it and phone is very stable, fast and good battery life.
IMHO well worth upgrading to it.
http://www.stechguide.com/huawei-p8-b399-marshmallow-update-2/
Click to expand...
Click to collapse
Yup, now phone has been backed up and updated to B370. Got some issues with updating to B399. Maybe was only bad download. Will check that link.
Thank you for support!

Super Bricked!!! Huawei P9 lite VNS-L31. Locked bootloader, no manufacturing mode...

Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!

michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you

zgfg said:
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
Click to expand...
Click to collapse
Moved from P9 forum.
Mike

michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
tried unlock service? I recommend this.

RyotaGamer said:
tried unlock service? I recommend
Click to expand...
Click to collapse
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me

michel_duenas said:
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
Click to expand...
Click to collapse
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".

RyotaGamer said:
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
Click to expand...
Click to collapse
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo

michel_duenas said:
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
Click to expand...
Click to collapse
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.

RyotaGamer said:
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
Click to expand...
Click to collapse
1- No, I don't have bootloader unlock code.
2- In fastboot mode it appears to unlock FRP and unlock bootloader ... but when trying commands from fastboot mode I get an error: FAILED (remote: command not allowed). I found the phone with the fastboot devices command. The mobile shows on the fastboot screen that Phone unlocked but I sincerely believe (by not admitting any code for fastboot) that the bootloader is locked.
3- The Huawei logo lasts forever ... until it has finished with the battery capacity. And I can not charge the battery because whenever I put the USB charger the phone is fixed and stays in the Huawei logo for centuries and centuries.
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
5- In fastboot mode, it launched the "fastboot restart recovery" command but does not restart in recovery mode, it restarts but shows the Huawei logo. Tried the command "fastboot flash recovery recovery.img (TWRP)" but it does not flash and throws the FAILED error (remote: command not allowed)
6- All the commands and tests I do without SD card and without SIM card
7- Tried by pressing the power button 10 seconds (9 seconds, 15 seconds, 30 seconds, 5 seconds .... etc) There is no way always fix showing the Huawei logo and it does not leave there. Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Thank you for your interest. But I'm still trying to find a solution.
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option

michel_duenas said:
2- In fastboot mode it appears to unlock FRP and unlock bootloader
Click to expand...
Click to collapse
how did you unlock without code?
michel_duenas said:
Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Click to expand...
Click to collapse
you can't boot recovery while charging.
michel_duenas said:
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
Click to expand...
Click to collapse
yes. it is final option.
btw, did you flashed oeminfo before?

RyotaGamer said:
how did you unlock without code?
No, no, nooooo ... it's not unlocked. Apparently it is unlocked (it shows it like this) but when entering the codes by fastboot it does not admit them and the error that I told you comes out
you can't boot recovery while charging.
While charging I can't do anything. No recovery, no flash (3 buttons)., No boot ... ONLY fastboot
yes. it is final option.
Ok, I guessed it ... and I don't rule it out given the case I'm in.
btw, did you flashed oeminfo before?
Click to expand...
Click to collapse
The steps I have flaseado have been ROM for the three buttons and dload folder on SD card from here:
1- HUAWEI P9 LITE ROLLBACK PACKAGE (VNS-L31, FROM ANDROID 7.0 EMUI 5.0 TO ANDROID 6.0 EMUI 4.1, C900B300, ENGLISH)
2- VNS-L31C432B210-FULL, Region - Europe, State - Official, Type EMUI 4.1.3 Android 6
3- VNS-L31C432B371-FULL, Region - Europe, State - Official, Type EMUI 5.0 Android 7- Full Firmware
4- SUPER BRICKKK !!
PS I don't know anything about oeminfo, as such I haven't flattered any of this ... but I don't know anymore

michel_duenas said:
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
Click to expand...
Click to collapse
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.

RyotaGamer said:
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
Click to expand...
Click to collapse
Thank you for everything and sorry for the inconvenience ..... I don't know if someone else offers me any more solution if I'm not forced to DC-Phoenix

did you find solution? i'm in the same boat and can't get unlock code. I don't mind paying for it even. Huawei F'ed us all with their latest stunt