Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
zgfg said:
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
Click to expand...
Click to collapse
Moved from P9 forum.
Mike
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
tried unlock service? I recommend this.
RyotaGamer said:
tried unlock service? I recommend
Click to expand...
Click to collapse
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
michel_duenas said:
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
Click to expand...
Click to collapse
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
RyotaGamer said:
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
Click to expand...
Click to collapse
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
michel_duenas said:
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
Click to expand...
Click to collapse
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
RyotaGamer said:
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
Click to expand...
Click to collapse
1- No, I don't have bootloader unlock code.
2- In fastboot mode it appears to unlock FRP and unlock bootloader ... but when trying commands from fastboot mode I get an error: FAILED (remote: command not allowed). I found the phone with the fastboot devices command. The mobile shows on the fastboot screen that Phone unlocked but I sincerely believe (by not admitting any code for fastboot) that the bootloader is locked.
3- The Huawei logo lasts forever ... until it has finished with the battery capacity. And I can not charge the battery because whenever I put the USB charger the phone is fixed and stays in the Huawei logo for centuries and centuries.
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
5- In fastboot mode, it launched the "fastboot restart recovery" command but does not restart in recovery mode, it restarts but shows the Huawei logo. Tried the command "fastboot flash recovery recovery.img (TWRP)" but it does not flash and throws the FAILED error (remote: command not allowed)
6- All the commands and tests I do without SD card and without SIM card
7- Tried by pressing the power button 10 seconds (9 seconds, 15 seconds, 30 seconds, 5 seconds .... etc) There is no way always fix showing the Huawei logo and it does not leave there. Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Thank you for your interest. But I'm still trying to find a solution.
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
michel_duenas said:
2- In fastboot mode it appears to unlock FRP and unlock bootloader
Click to expand...
Click to collapse
how did you unlock without code?
michel_duenas said:
Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Click to expand...
Click to collapse
you can't boot recovery while charging.
michel_duenas said:
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
Click to expand...
Click to collapse
yes. it is final option.
btw, did you flashed oeminfo before?
RyotaGamer said:
how did you unlock without code?
No, no, nooooo ... it's not unlocked. Apparently it is unlocked (it shows it like this) but when entering the codes by fastboot it does not admit them and the error that I told you comes out
you can't boot recovery while charging.
While charging I can't do anything. No recovery, no flash (3 buttons)., No boot ... ONLY fastboot
yes. it is final option.
Ok, I guessed it ... and I don't rule it out given the case I'm in.
btw, did you flashed oeminfo before?
Click to expand...
Click to collapse
The steps I have flaseado have been ROM for the three buttons and dload folder on SD card from here:
1- HUAWEI P9 LITE ROLLBACK PACKAGE (VNS-L31, FROM ANDROID 7.0 EMUI 5.0 TO ANDROID 6.0 EMUI 4.1, C900B300, ENGLISH)
2- VNS-L31C432B210-FULL, Region - Europe, State - Official, Type EMUI 4.1.3 Android 6
3- VNS-L31C432B371-FULL, Region - Europe, State - Official, Type EMUI 5.0 Android 7- Full Firmware
4- SUPER BRICKKK !!
PS I don't know anything about oeminfo, as such I haven't flattered any of this ... but I don't know anymore
michel_duenas said:
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
Click to expand...
Click to collapse
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
RyotaGamer said:
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
Click to expand...
Click to collapse
Thank you for everything and sorry for the inconvenience ..... I don't know if someone else offers me any more solution if I'm not forced to DC-Phoenix
did you find solution? i'm in the same boat and can't get unlock code. I don't mind paying for it even. Huawei F'ed us all with their latest stunt
Related
Trying to get my nexus 4 working again - Its currently stuck on the google logo - I have downloaded alot of software mentioned on the site to try to flash new firmware onto it however i keep encountering the problem that the bootloader is not unlocked - Any time i try to flash new firmware i get the message
"FAILED (remote: not supported in locked device)"
In order to unlock the bootloader correctly i need to be fit to boot the phone back into the android software however it keeps hanging on the google screen - Can anyone help me with this?
Thanks
Cathal
ccrudden said:
Trying to get my nexus 4 working again - Its currently stuck on the google logo - I have downloaded alot of software mentioned on the site to try to flash new firmware onto it however i keep encountering the problem that the bootloader is not unlocked - Any time i try to flash new firmware i get the message
"FAILED (remote: not supported in locked device)"
In order to unlock the bootloader correctly i need to be fit to boot the phone back into the android software however it keeps hanging on the google screen - Can anyone help me with this?
Thanks
Cathal
Click to expand...
Click to collapse
To unlock your bootloader, you don't have to boot into Android. Just hold the power button and both volume buttons for 10 seconds, then quickly release them and press power+Volume down. That should boot you in fastboot, where you can use the "fastboot oem unlock" command, and then flash the factory images.
abaaaabbbb63 said:
To unlock your bootloader, you don't have to boot into Android. Just hold the power button and both volume buttons for 10 seconds, then quickly release them and press power+Volume down. That should boot you in fastboot, where you can use the "fastboot oem unlock" command, and then flash the factory images.
Click to expand...
Click to collapse
Hi, Thanks for the reply - I have tried that and it says its unlocked but when I try to flash any file it brings up an error when the phone reboots into fastboot mode it states its locked again?
Any other ideas?
Please
Thanks
ccrudden said:
Hi, Thanks for the reply - I have tried that and it says its unlocked but when I try to flash any file it brings up an error when the phone reboots into fastboot mode it states its locked again?
Any other ideas?
Please
Thanks
Click to expand...
Click to collapse
In fastboot type
fastboot oem device-info
Does it show your device as locked or unlocked?
Sent from my Nexus 5 using XDA Free mobile app
um.... i am trying to use the MiFlash and it went into some error and now my phone has nothing (no recover, no roms) and can't get into the download mode if i hold the vol + and vol - and power button (keep rebooting)
when i connect to MiFlash program it didn't show my device too
I can't turn off my phone and stuck at "MI" logo
can someone help me out please and let me know what to do?
thanks
I finally solve the problem but i am getting the following when i try to flash the china dev rom
"not enough storage is available to process this command..."
what should i do?
I am currently flashed the SpaceX one but couldn't unlock my bootloader when I hit 50%, i have the unlock permission from xiaomi
wait, wait, wait...
First, you try to flash china dev or spacex?
And to enter download mode, press power and volume +
the only way i find to flash new rom with locked bootloader is to use miflash BETA
P.S. : If you have the mi logo at boot you can go to download mode
um......thanks it work flashing the china dev rom to my phone using the beta but......
actually it won't let me go into the download mode cuz the recovery is gone and when i press vol + and vol- and power together it won't go into the download mode too
so i dig up the internet and found that you can go into fastboot mode and type "fastboot oem edl" in the cmd and it work some how
um... i have the permission to unlock my phone but how come when i do the unlock it can't go pass 50 percent and asked me to try again? is there something wrong?
Ah i see what happen, I have to login my phone with mi account first and unlock the bootloader
Thanks the miflash beta it's very helpful
Solve my problem
Hi, my screen doesn't seems to work. I wanted to downgrade from Nougat, so i flashed oeminfo and then rebooted and installed b130 l-21 firmware. Installation reached 100% but then it tell an error and i there was just a button to reboot, so i pressed it and after that, black screen. Charging led not working too. By the way, i don't know why, but my phone is booting only in fastboot mode, even if i force reboot by holding power button, the device is rebooting in fastboot. I re-unlocked the bootloader and then tried to flash b160, but it seems like it din't flash nothing, because when i type "fastboot getvar rescue_phoneinfo" it says that i'm on B130. Any idea?
Edit: DC-Phoenix unlocker says that "battery state: 0" is this ok?
xDavi01 said:
Hi, my screen doesn't seems to work. I wanted to downgrade from Nougat, so i flashed oeminfo and then rebooted and installed b130 l-21 firmware. Installation reached 100% but then it tell an error and i there was just a button to reboot, so i pressed it and after that, black screen. Charging led not working too. By the way, i don't know why, but my phone is booting only in fastboot mode, even if i force reboot by holding power button, the device is rebooting in fastboot. I re-unlocked the bootloader and then tried to flash b160, but it seems like it din't flash nothing, because when i type "fastboot getvar rescue_phoneinfo" it says that i'm on B130. Any idea?
Edit: DC-Phoenix unlocker says that "battery state: 0" is this ok?
Click to expand...
Click to collapse
Disconnect the cable, after Dload b130, b160 or b.... then press volume + and power.
No longer hold power when the screen starts.
Recovery huawei wipe factory rest and wipe cache reboot.
Chisetdel31260 said:
Disconnect the cable, after Dload b130, b160 or b.... then press volume + and power.
No longer hold power when the screen starts.
Recovery huawei wipe factory rest and wipe cache reboot.
Click to expand...
Click to collapse
Thank you, but if i try to install with 3 button method i can't see if it's actually installing because the screen is black.
xDavi01 said:
Thank you, but if i try to install with 3 button method i can't see if it's actually installing because the screen is black.
Click to expand...
Click to collapse
How old is your phone and we're you from ?
Kcetin20 said:
How old is your phone and we're you from ?
Click to expand...
Click to collapse
I bought it about 1 month ago, and i'm from Italy.
xDavi01 said:
I bought it about 1 month ago, and i'm from Italy.
Click to expand...
Click to collapse
http://consumer.huawei.com/minisite/it/vipservice/index.html
Call huawei and ask for Huawei VIP they will pickup the phone and return it back.
Since you're under warranty its for free. i just sended my phone today was also black screen.
Kcetin20 said:
http://consumer.huawei.com/minisite/it/vipservice/index.html
Call huawei and ask for Huawei VIP they will pickup the phone and return it back.
Since you're under warranty its for free. i just sended my phone today was also black screen.
Click to expand...
Click to collapse
Even if i have unlocked bootloader? Or do i need to relock it?
xDavi01 said:
Even if i have unlocked bootloader? Or do i need to relock it?
Click to expand...
Click to collapse
push stock recovery and relock it and call them
Kcetin20 said:
push stock recovery and relock it and call them
Click to expand...
Click to collapse
Thank you, i'll try to call this service and then i'll let you know how's gone
xDavi01 said:
Thank you, i'll try to call this service and then i'll let you know how's gone
Click to expand...
Click to collapse
You're wellcome good luck.
xDavi01 said:
Thank you, i'll try to call this service and then i'll let you know how's gone
Click to expand...
Click to collapse
Any news from your device ? My device is repaired no funds or payments...monday i will receive it
Kcetin20 said:
Any news from your device ? My device is repaired no funds or payments...monday i will receive it
Click to expand...
Click to collapse
Oh, yea, i finally got my device working again without using warranty, but i had to pay 15€ for the DC-Phoenix flash service. With that service i could flash any file that is into an .app instead of just flash system, boot and recovery with classic fastboot method. So i downloaded b161, flashed it and my screen came back again!
I unlocked my phone, and updated with wrong update.app. It booting non-stop, when I press 'power' - it's vibrate 2 times, show a logo and then "Your device had been unlocked and can't be trusted". I can't even go to Fastboot & Rescue Mode! Computer through USB don't see a phone. Soooo.... I'm stucked. What I can do ?
Plug your phone on pc.
Just after see the first charging screen launch:
"Fastboot reboot bootloader"
Try again more, it's work..
Therand said:
Plug your phone on pc.
Just after see the first charging screen launch:
"Fastboot reboot bootloader"
Try again more, it's work..
Click to expand...
Click to collapse
hm, don't work..
zukovsromsis said:
hm, don't work..
Click to expand...
Click to collapse
here will be a video - https://www.youtube.com/watch?v=2PtIJXZx6kE
zukovsromsis said:
hm, don't work..
Click to expand...
Click to collapse
Connect your phone to PC, hold the VOLUME DOWN button and then press and hold the POWER for 10 seconds, phone will reboot ,( with pray in fastboot ).
zukovsromsis said:
here will be a video - https://www.youtube.com/watch?v=2PtIJXZx6kE
Click to expand...
Click to collapse
I not see correctly.
On your video, your finger push power button or not?
bozka1 said:
Connect your phone to PC, hold the VOLUME DOWN button and then press and hold the POWER for 10 seconds, phone will reboot ,( with pray in fastboot ).
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=GsUqPRd3QFY Don't work ((((
Therand said:
I not see correctly.
On your video, your finger push power button or not?
Click to expand...
Click to collapse
In first video I didn't, in second - yes.
zukovsromsis said:
In first video I didn't, in second - yes.
Click to expand...
Click to collapse
Not push any buttons..
Just plug phone on PC and wait 3 sec*, launch fastboot command : "fastboot reboot bootloader"
*3 at 7 sec, try several times
Therand said:
Not push any buttons..
Just plug phone on PC and wait 3 sec*, launch fastboot command : "fastboot reboot bootloader"
*3 at 7 sec, try several times
Click to expand...
Click to collapse
it says "<waiting for any device>" and nothing more
zukovsromsis said:
it says "<waiting for any device>" and nothing more
Click to expand...
Click to collapse
Try waiting till the battery is fully discharged, then press a hold Volume down and connect phone to PC ,hold Volume down until your phone will turn on ( it may take 5 - 7 minutes ).
Or, try flash stock firmware via dload (create a folder on the root of the sd card called dload , then put the stock huawei uppdate.app in the folder then shut down and hold volume up, down and the power button at the same time and it will flash the stock firmware).
zukovsromsis said:
it says "<waiting for any device>" and nothing more
Click to expand...
Click to collapse
Is very strange, your bootloader has not disappeared...
You have try with HiSuite >> repair phone?
Follow on screen instructions, HiSuite is able to boot phone on bootloader.
Last try with command:
Tipe "fastboot reboot bootloader", you see "waiting for any devices", plug your phone on PC and wait or push power button if you see the warning phone can be trusted...
Therand said:
Is very strange, your bootloader has not disappeared...
You have try with HiSuite >> repair phone?
Follow on screen instructions, HiSuite is able to boot phone on bootloader.
Last try with command:
Tipe "fastboot reboot bootloader", you see "waiting for any devices", plug your phone on PC and wait or push power button if you see the warning phone can be trusted...
Click to expand...
Click to collapse
I really don't know what to do... The problem is that my computer don't see my phone, not ADB, not HiSuite. Any button combinations don't work too. The only screen appears is that in video. I really stucked.
bozka1 said:
Try waiting till the battery is fully discharged, then press a hold Volume down and connect phone to PC ,hold Volume down until your phone will turn on ( it may take 5 - 7 minutes ).
Or, try flash stock firmware via dload (create a folder on the root of the sd card called dload , then put the stock huawei uppdate.app in the folder then shut down and hold volume up, down and the power button at the same time and it will flash the stock firmware).
Click to expand...
Click to collapse
Naah... I holded 10 minutes... no way.
My computer don't see any usb connecting from my phone. Before I unlocked bootloader, it connected and could do anything in adb.... -__-
zukovsromsis said:
I really don't know what to do... The problem is that my computer don't see my phone, not ADB, not HiSuite. Any button combinations don't work too. The only screen appears is that in video. I really stucked.
Click to expand...
Click to collapse
I watch again your first video..
1. You see huawei logo
2.You see the screen "your phone can trust..."
3. See huawei logo again
4.You see a other screen but no options, just "your device is booting now".
Ok so the "pré-boot" is corect..
Just after the 4 point, launch fastboot reboot bootloader comand.. try again many time, at different (1 second after the screen 4 or 3 sec after screen 4, ...)
I sure at 100% work, it's forced..
It's the only solutions for that.
zukovsromsis said:
I unlocked my phone, and updated with wrong update.app. It booting non-stop, when I press 'power' - it's vibrate 2 times, show a logo and then "Your device had been unlocked and can't be trusted". I can't even go to Fastboot & Rescue Mode! Computer through USB don't see a phone. Soooo.... I'm stucked. What I can do ?
Click to expand...
Click to collapse
Ok . I understand that he phone don't boot and u don't have fastboot . Turn it off , hold volume down and plug in usb cable . If nothing will happen use dload. It's the simplest way to fix it phone and u didn't even try it ....
Or if it won't work flash rollback package via dload and then mm ROM
---------- Post added at 12:38 PM ---------- Previous post was at 12:35 PM ----------
Dload rollback idk how it actually works but always I could flash any ROMs via dload after that . Even nugat ROM when I used it xD . Meaby its bug 4 me , meaby that's how it works . Idk . Try
Nahh, don't work anything.. 0 results... It's really stucked. ''Waiting for any device" and no any "update.app" work. Can't launch anything button combination, it says - "Your device is booting now..." and nothing more. I really tried everything.
zukovsromsis said:
Nahh, don't work anything.. 0 results... It's really stucked. ''Waiting for any device" and no any "update.app" work. Can't launch anything button combination, it says - "Your device is booting now..." and nothing more. I really tried everything.
Click to expand...
Click to collapse
Try this utility HERE for boot to bootloader..
Or try DC unlocker..
If you not have acces to bootloader, you not able to restore phone (in your state)
Therand said:
Try this utility HERE for boot to bootloader..
Or try DC unlocker..
If you not have acces to bootloader, you not able to restore phone (in your state)
Click to expand...
Click to collapse
Waiting for device...
Computer simply don't see my phone. Computer can't help in this situation.
Same
zukovsromsis said:
Waiting for device...
Computer simply don't see my phone. Computer can't help in this situation.
Click to expand...
Click to collapse
I have the same problem, any who know how to repair?? PLS
guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.
i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?
Eyezcripz said:
guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.
Click to expand...
Click to collapse
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).
Mohamed Hasan said:
i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?
Click to expand...
Click to collapse
can u help me step by step . please help me I'm tired and cannot sleep
skiswim said:
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).
Click to expand...
Click to collapse
yes me too I don't know how to put the UPDATE.app in SD card becouse its bigger than 4gb (fat32) any tricks or solution how to put in sdcard(fat32)
Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update
Gamkutopolowk said:
Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update
Click to expand...
Click to collapse
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone
rommco05 said:
try dc phoenix is tool for unbricking huawei phones but u must pay for this tool
Click to expand...
Click to collapse
i try but after i go that site they not answering me via live support contact
Eyezcripz said:
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone
Click to expand...
Click to collapse
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware
Gamkutopolowk said:
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware
Click to expand...
Click to collapse
I think not open bcouse I trying to install twrp ,, always failed.
how what the command .
Rommco05 said:
plug phone to PC and turn off phone. Turn on with holding vol down+power button, now u will boot to fastboot
Click to expand...
Click to collapse
i mean what the code to check my phone info
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
Eyezcripz said:
i mean what the code to check my phone info
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.
Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.
Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
i try buf my twrp is gone.. sir i doing that all time to try.. but always in "HUAWEI ERECOVERY"
i dont know what happen i know i have twrp .but after use this command "fastboot oem relock (my unlock code)" my phone is reboot and thats all ..always in ****ing HUAWEI ERECOVERY i try to open my phone by clicking power +vol up .to pen in twrp recover but always in HUAWEI ERECOVERY.. i dont know what happen to my phone...
in my FASTBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
rommco05 said:
i this situation you cant do anything. Your choice is only dc phoenix
Click to expand...
Click to collapse
if you help me step by step i try .
rommco05 said:
i never try this tool, make a quick search on google.
1.you can not lock the bootloader when you have a twrp installed this is big mistake.
Click to expand...
Click to collapse
yea i know thats why my phone like this now
Rommco05 said:
Believe me if u have locked FRP and u cannot boot to system u hace just 3 choices: 1. DC Phoenix 2. FunkyHuawei 3.Service center
Click to expand...
Click to collapse
yea my brother talk me to go huawei center you think how many days to repair my phone ? or only hour?
Rommco05 said:
I don't know. Anyway u have locked bootloader so u can use warranty! I have phone in service 3 days for replace screen
Click to expand...
Click to collapse
im lock bootloader but i already unlock this. by using adb
my problem is after relock my oem my phone is reboot after my phone is always in HUAWEI ERECOVERY