(help im willing to pay ) huawei p10 plus brick - Huawei P10 Plus Questions & Answers

guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.

i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?

Eyezcripz said:
guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.
Click to expand...
Click to collapse
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).

Mohamed Hasan said:
i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?
Click to expand...
Click to collapse
can u help me step by step . please help me I'm tired and cannot sleep

skiswim said:
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).
Click to expand...
Click to collapse
yes me too I don't know how to put the UPDATE.app in SD card becouse its bigger than 4gb (fat32) any tricks or solution how to put in sdcard(fat32)

Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update

Gamkutopolowk said:
Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update
Click to expand...
Click to collapse
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone

rommco05 said:
try dc phoenix is tool for unbricking huawei phones but u must pay for this tool
Click to expand...
Click to collapse
i try but after i go that site they not answering me via live support contact

Eyezcripz said:
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone
Click to expand...
Click to collapse
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware

Gamkutopolowk said:
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware
Click to expand...
Click to collapse
I think not open bcouse I trying to install twrp ,, always failed.

how what the command .

Rommco05 said:
plug phone to PC and turn off phone. Turn on with holding vol down+power button, now u will boot to fastboot
Click to expand...
Click to collapse
i mean what the code to check my phone info

ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
Eyezcripz said:
i mean what the code to check my phone info
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165

finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.

Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.

Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
i try buf my twrp is gone.. sir i doing that all time to try.. but always in "HUAWEI ERECOVERY"
i dont know what happen i know i have twrp .but after use this command "fastboot oem relock (my unlock code)" my phone is reboot and thats all ..always in ****ing HUAWEI ERECOVERY i try to open my phone by clicking power +vol up .to pen in twrp recover but always in HUAWEI ERECOVERY.. i dont know what happen to my phone...
in my FASTBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK

rommco05 said:
i this situation you cant do anything. Your choice is only dc phoenix
Click to expand...
Click to collapse
if you help me step by step i try .

rommco05 said:
i never try this tool, make a quick search on google.
1.you can not lock the bootloader when you have a twrp installed this is big mistake.
Click to expand...
Click to collapse
yea i know thats why my phone like this now

Rommco05 said:
Believe me if u have locked FRP and u cannot boot to system u hace just 3 choices: 1. DC Phoenix 2. FunkyHuawei 3.Service center
Click to expand...
Click to collapse
yea my brother talk me to go huawei center you think how many days to repair my phone ? or only hour?

Rommco05 said:
I don't know. Anyway u have locked bootloader so u can use warranty! I have phone in service 3 days for replace screen
Click to expand...
Click to collapse
im lock bootloader but i already unlock this. by using adb
my problem is after relock my oem my phone is reboot after my phone is always in HUAWEI ERECOVERY

Related

how to fix | Rescuse Mode Huawei P8 UL-10

Hello friends
Please help me..
I got through Kingoroot to root the phone,
But after mobile Restart stuck in this mode!(Rescuse )
What to do .. ????
Android firmware on the phone was b320 .
I downloaded the firmware and poured in memory but does not install .....( V+,V-,Power)
It is not clear at all and never off the phone!
Please check Quick Tips
Please advise your friends.
I want to open my phone bootloader.
But Product ID have problems in finding the phone is not loaded!( rescuse mode)
How do I know Product ID device?
helpppppp meeeeeeeeee
GRA-UL10
Y7L7N15918001899
868014027689951
Product ID?
help ...
help me.............
maxomid said:
help me.............
Click to expand...
Click to collapse
Try to keep Volume +, Volume -, Power pressed. this will get you to twrp.
You can restore from there.
ladodo said:
Try to keep Volume +, Volume -, Power pressed. this will get you to twrp.
You can restore from there.
Click to expand...
Click to collapse
hi
twrp Recovery????
my phone lock Bootloader ... i can flash fastboot TWRP Recovery????????
maxomid said:
hi
twrp Recovery????
my phone lock Bootloader ... i can flash fastboot TWRP Recovery????????
Click to expand...
Click to collapse
Sorry, I thought that you are stuck in rescue mode.
To unlock bootloader: link
Yes you can install twrp: link
ladodo said:
Sorry, I thought that you are stuck in rescue mode.
To unlock bootloader: link
Yes you can install twrp: link
Click to expand...
Click to collapse
Thank you dear friend..
Unfortunately I do not know how should I get Product ID ...
help me..
how to fix????
please guide me..
It is now two days the phone.
And does not help anyone.
I need to unlock the bootloader code or Product ID does anyone find for me ????
Product: HUAWEI GRA-L10 (P8 64GB)
SN: Y7L7N15918001899
IMEI1:868014027689951
IMEI2:868014027709965
Product ID?????????
Unlock Code ?????????
don't worry, it might not be easy to fix but it is definetly not impossible, if you fill correctly with your phone details you will get your code, beware of recovery though.. i had the same issue you had, to successfully enter recovery you must hold power and volume up buttons until the phone restarts, wait for the huawei logo to appear, then wait !!6-8 more seconds!! before releasing the buttons, once you're in recovery you can flash firmware from dload folder on sdcard or wipe/install rom if you're on twrp
thanks fix by DC Phoenix

How to unlock bootloader if phone won't start up.

My phone is bricked and I was thinking about flashing it via adb fastboot, but I cant since my bootloader is locked, I tried to get the code but it is asking me for info which I can only get with phone turned on, is there anything I can do?
I got IMEI only, but I also need Product Model, Product Serial number, Product ID. (I can access those only in settings and in dial pad if I am not wrong).
See the back of phone, what type of model is? VNS-???
SPLT said:
See the back of phone, what type of model is? VNS-???
Click to expand...
Click to collapse
VNS-L21 (single sim)
1mbb23 said:
VNS-L21 (single sim)
Click to expand...
Click to collapse
Ok, do you have installed the driver or Hisuite?
1mbb23 said:
My phone is bricked and I was thinking about flashing it via adb fastboot, but I cant since my bootloader is locked, I tried to get the code but it is asking me for info which I can only get with phone turned on, is there anything I can do?
I got IMEI only, but I also need Product Model, Product Serial number, Product ID. (I can access those only in settings and in dial pad if I am not wrong).
Click to expand...
Click to collapse
Reflash stock rom using dload method. It doesn't require an unlocked bootloader.
Here's how to do it: CLICK HERE . Read carefully
I've the same problem now, but I cannot enter ind load mode. my p9 lite not shutdown. if I hold power button it reboot but non load or recovery mode. only fastboot mode. but I haven't enabled developer option so I can't unlock bootloader. how can I do?
---------- Post added at 03:35 PM ---------- Previous post was at 03:34 PM ----------
dariomrk said:
Reflash stock rom using dload method. It doesn't require an unlocked bootloader.
Here's how to do it: CLICK HERE . Read carefully
Click to expand...
Click to collapse
but I hav unlock code for boot loader
croccio said:
i've the same problem now, but i cannot enter ind load mode. My p9 lite not shutdown. If i hold power button it reboot but non load or recovery mode. Only fastboot mode. But i haven't enabled developer option so i can't unlock bootloader. How can i do?
---------- post added at 03:35 pm ---------- previous post was at 03:34 pm ----------
but i hav unlock code for boot loader
Click to expand...
Click to collapse
DID YOU READ THE THREAD I POSTED IN THE LINK ABOVE?!?!?
•No?
•Okay, then read it carefully, BECAUSE I'M NOT HELPING THROUGH PERSONAL MESSAGES!
it cannot enter in dload mode
edit:
if press power off button for 10 sec it restart.
is there any way to turn off it?
---------- Post added at 03:51 PM ---------- Previous post was at 03:49 PM ----------
dariomrk said:
DID YOU READ THE THREAD I POSTED IN THE LINK ABOVE?!?!?
•No?
•Okay, then read it carefully, BECAUSE I'M NOT HELPING THROUGH PERSONAL MESSAGES!
Click to expand...
Click to collapse
yes I've read it, but cannot enter in dload mode with vol - and power. it restart infinite
croccio said:
it cannot enter in dload mode
edit:
if press power off button for 10 sec it restart.
is there any way to turn off it?
Click to expand...
Click to collapse
When your phone restarts press volume + and volume - only!
dariomrk said:
When your phone restarts press volume + and volume - only!
Click to expand...
Click to collapse
I've tried so:
how power off
when screen is black press vol - and vol + and power
boot logo appear and vibrate
than after few sec logo disappear than vibrate and appear logo.
if press only vol+ and vol- it vibrates two times
it stuck with logo
•Hold power button until you feel a vibration
•Immediately press and hold volume +&- untill your phone doesn't start updating from the dload folder on your sdcard
dariomrk said:
When your phone restarts press volume + and volume - only!
Click to expand...
Click to collapse
dariomrk said:
•Hold power button until you feel a vibration
•Immediately press and hold volume +&- untill your phone doesn't start updating from the dload folder on your sdcard
Click to expand...
Click to collapse
it vibrates two times but nothing dload
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
if you want I can make video, maybe I wrong something
croccio said:
it vibrates two times but nothing dload
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
if you want I can make video, maybe I wrong something
Click to expand...
Click to collapse
I can't. Wait for help from someone elsw
dariomrk said:
•Hold power button until you feel a vibration
•Immediately press and hold volume +&- untill your phone doesn't start updating from the dload folder on your sdcard
Click to expand...
Click to collapse
please help me my phone doesn't start at all ... what can i do i have faild flashing it ... is there any hope for me ??
:crying::crying:
Try this: conect the phone to charger or USB, hold power + vol Up and there you will join to erecovery and choose shutdown, if this not appear try without charger.
i have mate 10 lite same problem,bootloader is locked so can i use dload method,and where to get the stock firmware
I have executed these commands and after from this moment, the screen of my device is black and which key or combinations of keys I press nothing works..
Code:
fastboot flash preloader preloader_begonia.bin
fastboot flash lk lk.img
fastboot flash lk2 lk.img
Disconnected the cable, connected the cable, holding the keys for a longer period, holding them for a short period. Only power key, only volume up/down, combining power with volume. Nothing works. When connecting it to the computer, I do see device manager constantly refreshing. But both fastboot and adb are not finding any devices.
When holding the power button for more then 10 seconds, I do feel a small vibe but thats all. Nothing further happens, also not when connecting it to the PC or disconnecting it from the PC.
Anyone any idea what I could to to fix this?
Josjr said:
I have executed these commands and after from this moment, the screen of my device is black and which key or combinations of keys I press nothing works..
Code:
fastboot flash preloader preloader_begonia.bin
fastboot flash lk lk.img
fastboot flash lk2 lk.img
Disconnected the cable, connected the cable, holding the keys for a longer period, holding them for a short period. Only power key, only volume up/down, combining power with volume. Nothing works. When connecting it to the computer, I do see device manager constantly refreshing. But both fastboot and adb are not finding any devices.
When holding the power button for more then 10 seconds, I do feel a small vibe but thats all. Nothing further happens, also not when connecting it to the PC or disconnecting it from the PC.
Anyone any idea what I could to to fix this?
Click to expand...
Click to collapse
Wrong section bro...
-Alf- said:
Wrong section bro...
Click to expand...
Click to collapse
Oh sorry, where should I post this then?
Josjr said:
Oh sorry, where should I post this then?
Click to expand...
Click to collapse
Xiaomi Redmi Note 8 Pro

Requesting Assistance with Bricked P8 Lite

Hello, I m battling this problem already 2 days, I have P8 Lite mobile phone.
Phone Originally came with ALE-L21 C432B132 but at that time I got update ALE-L21 C432B188 what made my phone 5.0.1 Android
So a few days ago I received Update ALE-L21 C432B587 in updater but what happened is the update stuck on 1 % then showed Error message
That I cant Install that and Phone Rebooted. And it stuck on the First LOGO and now the fun part starts.
I read Every single post, guide what was on google all Suggested to use fastboot and just Flash back to my Original ALE .
Ok, so I did all the Phone Unlocking by getting unlock code and then using fastboot to unlock the phone now my phone is unlocked and it shows that when I'm in fastboot.
I also put UPDATE.app in SDcard just in case but thing is I cant Access that Update menu Or Recovery menu With Button UP + Power Only thing what Works is Fastboot
So I Extracted the boot, System, Recovery, cust, placed in adb folder and run the Cmd if I write fastboot devices it shows my phone so all is ok . and when I do all the flash commands nothings are failing and all shows that is completed. but still I can't start my phone and the only volume down + power works other combinations have no reaction + It just stands on that logo it doesn't even reboot how others have it
I let it send there for 1 h and it was just That first Logo.
So I'm writing here maybe someone has some Suggestion how to Resurrect my phone I'm open now to any suggestions.
Flash TWRP recovery
Then flash any ROM you want by TWRP
You can get the ROMs via "firmware finder" application, it's in play store..
Thank you for your Answer . I Tried to Install TWRP Recovery but without a luck Phone just stays on LOGO and Only button Combination Works is Volume Down + Power what Goes in Fast boot. Maybe i dont know how to enter TWRP mode however non of Huawei button presses worked. Maybe there is other way to get in that Recovery mode .. Also when i turn on phone and im in that LOGO my phone is not recognized by my PC , ONLY if i enter Fastboot i can See my Phone in Device manager and in CMD writing fastboot Devices. if i write adb devices it shows nothing .
also i have question does it mattare how i write : fastboot flash boot boot.img because if i write fastboot flash BOOT boot.img i cant flash it only if all letters are small it goes in .
Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.
Positivity_ said:
Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.
Click to expand...
Click to collapse
run twrp press vol plus and power and diconnect your phone from pc.
Adi5 said:
run twrp press vol plus and power and diconnect your phone from pc.
Click to expand...
Click to collapse
I just flashed TWRP3.0.2.img and Did what you told i got same Error what you can see in image. is that wrong twrp version?
try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, if recovery2 is not corrupted it should work. Good Luck
redknight65 said:
try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, it should work
Click to expand...
Click to collapse
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.
Positivity_ said:
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.
Click to expand...
Click to collapse
how long did you wait after the vibration?
---------- Post added at 21:30 ---------- Previous post was at 21:29 ----------
also try to flash recovery2
redknight65 said:
how long did you wait after the vibration?
Click to expand...
Click to collapse
at last 2 min or even more buttons are pressed nothing happens
Yes i flashed Recovery2 too with the ROM i flashed now still the same
I did Steps like in tutorials
Starting with lowest Version then flashing up Still nothing.
Positivity_ said:
at last 2 min or even more buttons are pressed nothing happens
Click to expand...
Click to collapse
try to flash recovery2 and do that again
redknight65 said:
try to flash recovery2 and do that again
Click to expand...
Click to collapse
I just did it again .. nop it still just vibrates and nothing is happening.
Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
then I can't help you, sorry
Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.
RootingPro-18 said:
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.
Click to expand...
Click to collapse
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same
Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
Click to expand...
Click to collapse
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same
Click to expand...
Click to collapse
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery
RootingPro-18 said:
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery
Click to expand...
Click to collapse
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.
Positivity_ said:
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.
Click to expand...
Click to collapse
Noooo, B611 is for single sim. B612 is for Dual.
RootingPro-18 said:
Noooo, B611 is for single sim. B612 is for Dual.
Click to expand...
Click to collapse
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?
Positivity_ said:
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/general/security-update-ale-l21c432b611-single-t3688441 from here you can get lastest vesions

P8 stuck at boot

Hi to everyone ^^
I have here a P8, stuck on boot with the "TIM" logo (operator). I can't even shutdown it.
Is not mine and I still need to know more information about which firmware it had before get this sort of brick, anyway...
I can't enter in recovery (Power-vol+)
I can't enter in EMUI mode ( Power- Vol+ - Vol -)
....BUT I can enter in fastboot&rescue mode.
I've already unlocked the bootloader and I can flash everything....but still, I can't get access to the recovery or EMUI mode T___T
Does exist a "Generic" firmware that works for unbrick this phone?
Do you have any suggest or link for some Recovery/Boot/Cust file?
Thanks in advance for any answers.
Hello , You are in hard step !
Install HiSuite on your PC and use Recovery Tools official Method from Huawei.
NAViDArt said:
Hello , You are in hard step !
Install HiSuite on your PC and use Recovery Tools official Method from Huawei.
Click to expand...
Click to collapse
Already tried.
This is the result...The device doesn't support system recovery.
Sorry for the multi-post T__T
Anyway this is my situation...I can just use the fastboot, or see the "Bootlogo" for the rest of my life......(or battery )
Have you tried a forced update by placing a full ROM named "Update.app" in a folder called "DLOAD" on the external SD card and then pressing and holding all three buttons ?
Yep, already done...
No response.
SD ready, power on the phone holding all three buttons, but nothing to do... it just start normally and get stuck on logo. =(
Softtm17 said:
Yep, already done...
No response.
SD ready, power on the phone holding all three buttons, but nothing to do... it just start normally and get stuck on logo. =(
Click to expand...
Click to collapse
Have a look at Dc Phoenix :-
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
https://forum.xda-developers.com/huawei-p8/how-to/guide-how-to-unbrick-huawei-p8-failed-t3260704

Super Bricked!!! Huawei P9 lite VNS-L31. Locked bootloader, no manufacturing mode...

Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
zgfg said:
Better ask for help in P9 Lite section
This is for P9 (EVA, not P9 Lite VNS) - P9 and P9 Lite have different hardware, firmwares and users who can help you
Click to expand...
Click to collapse
Moved from P9 forum.
Mike
michel_duenas said:
Hi, I have a problem with my Huawei P9 lite VNS-L31. The phone is in brick !!! and does not pass the boot logo (huawei).
Locked the bootloader, I can not use the method of the three buttons (to install rom), I can not enter recovery, I can not put the manufacturing mode, the battery is at zero and I can not charge it when plugging the charger (I turn it off by disconnecting battery and I connect the battery again and when I put the charger the phone starts and is left with the huawei logo) ... the only thing I can do is put the fastbot mode but what if I can't do anything with the bootloader locked?
The Dc-unlock doesn't work for me since I can't put the manufacturing mode ... can it get worse?
Any solution? Can you get the bootloader unlock code in some way?
I do not know if brick will have a solution ... I do not give up!
I listen to proposals ... greetings!
Click to expand...
Click to collapse
tried unlock service? I recommend this.
RyotaGamer said:
tried unlock service? I recommend
Click to expand...
Click to collapse
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
michel_duenas said:
This is not a recommendation .... this site does not provide unlock codes for bootloader lara huawei ... not yet, or so they tell me
Click to expand...
Click to collapse
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
RyotaGamer said:
your phone can enter to force update mode?press vol up+down and power button without charging.device will show message"failed to update".
Click to expand...
Click to collapse
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
michel_duenas said:
when I press the three buttons Vol + and Vol- together with the button on ... it does nothing! Just turn it off and on again with the Huawei logo and it does not come out there ... no matter how long you have pressed the Vol + and Vol- buttons at the same time, it does not pass the Huawei logo
Click to expand...
Click to collapse
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
RyotaGamer said:
damn, ok, check these items:
to begin with, you have unlock code?
in fastboot mode, FRP is unlocked?
how long does huawei logo shows?
try "fastboot oem lock" command in fastboot mode.
try "fastboot reboot recovery" command in fastboot mode.
remove sdcard and sim card.
don't press power button longer than 10 seconds.
Click to expand...
Click to collapse
1- No, I don't have bootloader unlock code.
2- In fastboot mode it appears to unlock FRP and unlock bootloader ... but when trying commands from fastboot mode I get an error: FAILED (remote: command not allowed). I found the phone with the fastboot devices command. The mobile shows on the fastboot screen that Phone unlocked but I sincerely believe (by not admitting any code for fastboot) that the bootloader is locked.
3- The Huawei logo lasts forever ... until it has finished with the battery capacity. And I can not charge the battery because whenever I put the USB charger the phone is fixed and stays in the Huawei logo for centuries and centuries.
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
5- In fastboot mode, it launched the "fastboot restart recovery" command but does not restart in recovery mode, it restarts but shows the Huawei logo. Tried the command "fastboot flash recovery recovery.img (TWRP)" but it does not flash and throws the FAILED error (remote: command not allowed)
6- All the commands and tests I do without SD card and without SIM card
7- Tried by pressing the power button 10 seconds (9 seconds, 15 seconds, 30 seconds, 5 seconds .... etc) There is no way always fix showing the Huawei logo and it does not leave there. Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Thank you for your interest. But I'm still trying to find a solution.
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
michel_duenas said:
2- In fastboot mode it appears to unlock FRP and unlock bootloader
Click to expand...
Click to collapse
how did you unlock without code?
michel_duenas said:
Keep in mind that the battery is at 0% and all these tests I have to do with the USB charger connected because if it is not like that or start the Huawei logo (battery 0%)
Click to expand...
Click to collapse
you can't boot recovery while charging.
michel_duenas said:
PD: what do you know about DC-Phoenix? Would you recommend using it? or it would be the last option
Click to expand...
Click to collapse
yes. it is final option.
btw, did you flashed oeminfo before?
RyotaGamer said:
how did you unlock without code?
No, no, nooooo ... it's not unlocked. Apparently it is unlocked (it shows it like this) but when entering the codes by fastboot it does not admit them and the error that I told you comes out
you can't boot recovery while charging.
While charging I can't do anything. No recovery, no flash (3 buttons)., No boot ... ONLY fastboot
yes. it is final option.
Ok, I guessed it ... and I don't rule it out given the case I'm in.
btw, did you flashed oeminfo before?
Click to expand...
Click to collapse
The steps I have flaseado have been ROM for the three buttons and dload folder on SD card from here:
1- HUAWEI P9 LITE ROLLBACK PACKAGE (VNS-L31, FROM ANDROID 7.0 EMUI 5.0 TO ANDROID 6.0 EMUI 4.1, C900B300, ENGLISH)
2- VNS-L31C432B210-FULL, Region - Europe, State - Official, Type EMUI 4.1.3 Android 6
3- VNS-L31C432B371-FULL, Region - Europe, State - Official, Type EMUI 5.0 Android 7- Full Firmware
4- SUPER BRICKKK !!
PS I don't know anything about oeminfo, as such I haven't flattered any of this ... but I don't know anymore
michel_duenas said:
4- I haven't tried it ... I will. But I don't know to what extent it is important since I think the bootloader is locked even if it shows on the screen Phone unlocked.
Click to expand...
Click to collapse
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
RyotaGamer said:
have you tried "fastboot oem lock" command?
this command needed code...
sorry, i don't know how to solve you may use dc-phoenix.
Click to expand...
Click to collapse
Thank you for everything and sorry for the inconvenience ..... I don't know if someone else offers me any more solution if I'm not forced to DC-Phoenix
did you find solution? i'm in the same boat and can't get unlock code. I don't mind paying for it even. Huawei F'ed us all with their latest stunt

Categories

Resources