Database Users

My Storm is dead

I just bought a wileyfox storm, then I followed the process to flash custom recovery and root the phone which done successfully.
After while I got an error massage and the desktop wont show up although I was able to access settings from status bar.
so I made a factory reset from recovery but didnt work
then downloaded the kipper rom from cyanogen but it wont pass the verification, it keep saying this is a crackling phone
So I downloaded the crackling rom for The SWIFT version and from recovery mode I flashed its zip file successfully,(PASSED THE VERIFICATION), then flashed supersu.zip.
I pressed reboot system
It shaut down but never come back to life, the only thing that works is the charging notification red light
Please Help

1- turn off your phone
2- plug it on pc with vol + pressed
3- now type on cmd "fastboot devices" normaly it appear
4- if you haven't unlocked bootloader unlock it with the command "fastboot oem unlock"
5- download cyanogen recovery from cyanogenmod site !!AND CHECK IF WRITEN RECOVERY FOR KIPPER!!
6- flash it via fastboot, type in cmd "fastboot flash recovery cyanogenmod-recovery-kipper.img
And wait
7- now type fastboot reboot
And press vol - during the reboot
8- now you're in cyanogen recovery, so flash the ROM and do not forget to wipe

bobslesbricoleurs said:
1- turn off your phone
2- plug it on pc with vol + pressed
3- now type on cmd "fastboot devices" normaly it appear
4- if you haven't unlocked bootloader unlock it with the command "fastboot oem unlock"
5- download cyanogen recovery from cyanogenmod site !!AND CHECK IF WRITEN RECOVERY FOR KIPPER!!
6- flash it via fastboot, type in cmd "fastboot flash recovery cyanogenmod-recovery-kipper.img
And wait
7- now type fastboot reboot
And press vol - during the reboot
8- now you're in cyanogen recovery, so flash the ROM and do not forget to wipe
Click to expand...
Click to collapse
Appretiate your kind response
Unfortunatly, this wont work for my case, I think I need a way to unbrick the phone, cant access to fast boot, my pc can see the phone only as CUALCOMM chip.

What's OS you're using?

bobslesbricoleurs said:
What's OS you're using?
Click to expand...
Click to collapse
Windows 7 X64

Did you install fastboot driver?
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
Try to press vol + and vol - and power, tell if it vibrate?

bobslesbricoleurs said:
Did you install fastboot driver?
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
Try to press vol + and vol - and power, tell if it vibrate?
Click to expand...
Click to collapse
Sir, I really appreciate your concern, but believe me it's a hard brick case, so I cant access any usual boot neither fastboot nor recovery.
I wish someone tells me how to unbrick it.

Plug usb and try two vol button in same time, tell me if vibrate, if not let it charge during 1 hour and retry

bobslesbricoleurs said:
Plug usb and try two vol button in same time, tell me if vibrate, if not let it charge during 1 hour and retry
Click to expand...
Click to collapse
Nothing happened, even after recharging

There is a probleme, you've just flashed the swift ROM, not really a reason to brick...
And the swift have same partition like the storm.
Where do you live? Me in france

bobslesbricoleurs said:
There is a probleme, you've just flashed the swift ROM, not really a reason to brick...
And the swift have same partition like the storm.
Where do you live? Me in france
Click to expand...
Click to collapse
I'm in Egypt
When i googled my problem i found the same happend with oneplus one phones,
The problem was hard brick due to wrong rom, and windows can see the phone only as Cualcomm hs-usb Qdloader 9008, same as my case. And the problem solved for the oneplus one, so I have some hope that my phone will come back to life.

kazparoph said:
I'm in Egypt
When i googled my problem i found the same happend with oneplus one phones,
The problem was hard brick due to wrong rom, and windows can see the phone only as Cualcomm hs-usb Qdloader 9008, same as my case. And the problem solved for the oneplus one, so I have some hope that my phone will come back to life.
Click to expand...
Click to collapse
Good news, if your problem is solved please post how you do on this thread or new to explain the tutoriel

bobslesbricoleurs said:
Good news, if your problem is solved please post how you do on this thread or new to explain the tutoriel
Click to expand...
Click to collapse
Ofcourse I will.

bobslesbricoleurs said:
Did you install fastboot driver?
---------- Post added at 01:32 PM ---------- Previous post was at 01:31 PM ----------
Try to press vol + and vol - and power, tell if it vibrate?
Click to expand...
Click to collapse
Hi I have a similar problem, I installed the correct cyanogenmod and recovery and it was working fine, but after today's update it shows the bootup logo and then gets stuck in a black flickering screen.
I can't seem to be able to boot neither to the recovery nor to the fastboot mode, no volume key combination seems to work.
All adb says is the device is unauthorized and fastboot doesn't seem to be able to even see the device.
I tried the vol+ and vol- and power and it does vibrate, if I use the vol+ only it seems to get stuck forever on the vendor's bootup logo and the device doesn't seem to be seen neither from fastboot nor adb.
Is there anything else I can try to unbrick it or is it gone?
Thank you in advance for your help

kazparoph said:
I just bought a wileyfox storm, then I followed the process to flash custom recovery and root the phone which done successfully.
After while I got an error massage and the desktop wont show up although I was able to access settings from status bar.
so I made a factory reset from recovery but didnt work
then downloaded the kipper rom from cyanogen but it wont pass the verification, it keep saying this is a crackling phone
So I downloaded the crackling rom for The SWIFT version and from recovery mode I flashed its zip file successfully,(PASSED THE VERIFICATION), then flashed supersu.zip.
I pressed reboot system
It shaut down but never come back to life, the only thing that works is the charging notification red light
Please Help
Click to expand...
Click to collapse
wow, exact same thing, kept saying my device is a crackling device so i flash a crackling rom, it went dead flash!

Please stop flashing crackling roms on kipper.
If it reports crackling is wrong maybe ota somehow messed up.

kazparoph said:
I just bought a wileyfox storm, then I followed the process to flash custom recovery and root the phone which done successfully.
After while I got an error massage and the desktop wont show up although I was able to access settings from status bar.
so I made a factory reset from recovery but didnt work
then downloaded the kipper rom from cyanogen but it wont pass the verification, it keep saying this is a crackling phone
So I downloaded the crackling rom for The SWIFT version and from recovery mode I flashed its zip file successfully,(PASSED THE VERIFICATION), then flashed supersu.zip.
I pressed reboot system
It shaut down but never come back to life, the only thing that works is the charging notification red light
Please Help
Click to expand...
Click to collapse
Have you tried to hold together for about 20 seconds the power button and sound button less ?

Strugglin
I have same problem, either stuck in bootloop (to the wileyfox screen and back to black) or just off. ONLY red charger light shows when I plug it in. Fastboot not working, recovery boot not working... NOTHING is working. On top of that I haven't even installed any roms, not rooted etc. All I did was reboot when it froze on a silly game I didn't mean to open WTFF

wileyfox dead
I have the same problem, bootloop, qualcomm 9008 no fastboot or adb recognition. I'm guessing was the OTA update cos I didn't install any roms at all. TOTAL waste of money, zero support too. It's a non-starter DO NOT BUY!!!!

maxxie00 said:
Hi I have a similar problem, I installed the correct cyanogenmod and recovery and it was working fine, but after today's update it shows the bootup logo and then gets stuck in a black flickering screen.
I can't seem to be able to boot neither to the recovery nor to the fastboot mode, no volume key combination seems to work.
All adb says is the device is unauthorized and fastboot doesn't seem to be able to even see the device.
I tried the vol+ and vol- and power and it does vibrate, if I use the vol+ only it seems to get stuck forever on the vendor's bootup logo and the device doesn't seem to be seen neither from fastboot nor adb.
Click to expand...
Click to collapse
Same here , interesting is the different device status between linux and windows,
at debian it's "offline" - at windows "unauthorized".

Flashed wrong image. ZUK Z1 is bricked.

Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?

Take it to service center they dont even know what happan and repair or replace your phone as my expiriance same done on my old infocus m2

Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk

Use QPST and flash ZUI with that. I unbricked mine with that.

Kounjula Rahul said:
Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
All kinds of physical inputs and button combinations fail.
YoolaCro said:
Use QPST and flash ZUI with that. I unbricked mine with that.
Click to expand...
Click to collapse
QPST does not recognise the phone. Drivers installed and all set up al right, sadly.

Do as i say

i also did same mistake
tried to install twrp with flashify ...my phone too keeps on restarting every second..please help me guys..
if you got any solution to this means please help me

Did you solve the problem? Mine is having the same problem!

Please Help Me.....!!
SarthakSL said:
Did you solve the problem? Mine is having the same problem!
Click to expand...
Click to collapse
Did anyone find solution of it?
Because I accidently flashed one plus 1 twrp in zuk z1. Now device only shows zuk logo and after that complete black out. I also tried the solution of hardbricked( Volume up button) phone but can't fix this problem. I am not able to go to fastboot mode. Is my device is hardbricked or softbricked? Any one suggestion will be very helpful to me and thanks in advance.
---------- Post added at 06:48 PM ---------- Previous post was at 06:18 PM ----------
Giop114 said:
Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?
Click to expand...
Click to collapse
You found solution?
if found please please give me

It seems there is a solution. Keep pressing the Vol+ Vol- and the Power Button until the phone switches off. The phone will reboot. This time when you press Power Button, it will not restart. Hope I helped you.

Refer this
https://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833

(help im willing to pay ) huawei p10 plus brick

guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.

i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?

Eyezcripz said:
guys please help me im tired now to find a solution ,im willing to pay you ..
my huawei p10 plus vky-l29c185b172 always in "HUAWEI ERECOVER" but the problem is only show in my screen are
(DOWNLOAD LATEST VERSION AND RECOVER)
(REBOOT)
(SHUTDOWN)
i already try the download but always failed,
and i try the adb by vol down+usb then i see this in FASBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK
i try to install twrp but is failed too ,
i dont know what happen . i cannot open my p10 plus now always in
"HUAWEI ERECOVEY"
im tiredplease help me and i pay you.
Click to expand...
Click to collapse
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).

Mohamed Hasan said:
i have VKY-L29C185 did you try hwota ? did you try to unlock the bootloader ?
Click to expand...
Click to collapse
can u help me step by step . please help me I'm tired and cannot sleep

skiswim said:
hello,
i have same problem : https://forum.xda-developers.com/p10/development/fastboot-status-phone-relocked-frp-lock-t3727666
still search the solution but without success.
cant use hwota at sdcard because its bigger than 4gb (fat32).
Click to expand...
Click to collapse
yes me too I don't know how to put the UPDATE.app in SD card becouse its bigger than 4gb (fat32) any tricks or solution how to put in sdcard(fat32)

Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update

Gamkutopolowk said:
Hi Eyezcripz
follow this link worked http://www.stechguide.com/huawei-p10-plus-b181-nougat-update
Click to expand...
Click to collapse
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone

rommco05 said:
try dc phoenix is tool for unbricking huawei phones but u must pay for this tool
Click to expand...
Click to collapse
i try but after i go that site they not answering me via live support contact

Eyezcripz said:
how I know if my p10 plus is unlock bootloader .because my last command in adb is fastboot oem relock (16 unlock code) after reboot
then my phone is only in "huawei erecovery"
and I connect again in my PC only show in flashboot&rescue mode is phone relocked and frp lock I try install twrp in adb but always failed too. I'm so stress now .I don't know how to revive my phone
Click to expand...
Click to collapse
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware

Gamkutopolowk said:
if you have unlock bootloader? reboot try hold vol down plug usb enter fastboot then will install TWRP then choose 1 for SD CARD 8GB if you have copy three files follow link then choose 2 rebrand C432 final will install sd card full stock firmware
Click to expand...
Click to collapse
I think not open bcouse I trying to install twrp ,, always failed.

how what the command .

Rommco05 said:
plug phone to PC and turn off phone. Turn on with holding vol down+power button, now u will boot to fastboot
Click to expand...
Click to collapse
i mean what the code to check my phone info

ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
Eyezcripz said:
i mean what the code to check my phone info
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165

finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.

Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
finaly .i think you can help me ..let me try after work ..you have contact like whatsapp or facebook to tell you if work or not.. btw sir how to get oeminfo i see in the link to give me..they need oeminfo.

Mohamed Hasan said:
ok mate sry i was away for a while so
you have VKY-L29C185
you problem is you have frp on + boot loader locked right ? can you take a picture of your fastboot screen (turn off phone then plug to pc while holding vol down )
did you try to go into twrp (try power + vol up until you see huawei logo then keep pressing vol up button)
if that did not put your phone into twrp try power + vol up until you see Huawei logo then release power button and keep pressing vol up several times
does the picture of your phone is now unlocked and can not be trusted is there or it is gone ?
try to answer my questions and if no twrp + no unlocked bootloader
we may try DNS method with erecovery
---------- Post added at 06:05 PM ---------- Previous post was at 05:41 PM ----------
https://forum.xda-developers.com/mate-9/how-to/funky-huawei-erecovery-solution-100-t3620165
Click to expand...
Click to collapse
i try buf my twrp is gone.. sir i doing that all time to try.. but always in "HUAWEI ERECOVERY"
i dont know what happen i know i have twrp .but after use this command "fastboot oem relock (my unlock code)" my phone is reboot and thats all ..always in ****ing HUAWEI ERECOVERY i try to open my phone by clicking power +vol up .to pen in twrp recover but always in HUAWEI ERECOVERY.. i dont know what happen to my phone...
in my FASTBOOT&RESCUE MODE
PHONE RELOCKED
FRP LOCK

rommco05 said:
i this situation you cant do anything. Your choice is only dc phoenix
Click to expand...
Click to collapse
if you help me step by step i try .

rommco05 said:
i never try this tool, make a quick search on google.
1.you can not lock the bootloader when you have a twrp installed this is big mistake.
Click to expand...
Click to collapse
yea i know thats why my phone like this now

Rommco05 said:
Believe me if u have locked FRP and u cannot boot to system u hace just 3 choices: 1. DC Phoenix 2. FunkyHuawei 3.Service center
Click to expand...
Click to collapse
yea my brother talk me to go huawei center you think how many days to repair my phone ? or only hour?

Rommco05 said:
I don't know. Anyway u have locked bootloader so u can use warranty! I have phone in service 3 days for replace screen
Click to expand...
Click to collapse
im lock bootloader but i already unlock this. by using adb
my problem is after relock my oem my phone is reboot after my phone is always in HUAWEI ERECOVERY

no command

i cant do hard reset because i get no command and no recovry mode
any solutions ?

Mayersdz said:
i cant do hard reset because i get no command and no recovry mode
any solutions ?
Click to expand...
Click to collapse
Just press once volume up and power button together when you see the no command
You will get the recovery

I have a nokia 6 1025 (ex-AmazonPrime) flashed via OST with june firmware, and update via sd card recovery with ota updates until december. Then I flashed Oreo Beta in january.
All worked fine.
Now i want to update to Oreo final. The zip is in the SD card, but when i try to put in recovery mode there is only the "no command" message.
I tried to get into recovery with both methods, with volumeup+power keys, and with "adb reboot recovery". Always the same "no command" message
The suggested solution, pressing volumeup and power together does not work.

artigasperez said:
I have a nokia 6 1025 (ex-AmazonPrime) flashed via OST with june firmware, and update via sd card recovery with ota updates until december. Then I flashed Oreo Beta in january.
All worked fine.
Now i want to update to Oreo final. The zip is in the SD card, but when i try to put in recovery mode there is only the "no command" message.
I tried to get into recovery with both methods, with volumeup+power keys, and with "adb reboot recovery". Always the same "no command" message
The suggested solution, pressing volumeup and power together does not work.
Click to expand...
Click to collapse
Try pressing them together few times, its lil tricky
If it still doesn't work, then flash back mena firmware and then update till January patch, then install the final oreo, do not install beta oreo

You forget to press home button.
It should be volumeup+power+home button together.

Alvin Fung said:
You forget to press home button.
It should be volumeup+power+home button together.
Click to expand...
Click to collapse
Yes, i saw situshar answered volumeup+power+home in another thread, and it worked.
Returned here to say thanks and also found your answer.

artigasperez said:
Yes, i saw situshar answered volumeup+power+home in another thread, and it worked.
Returned here to say thanks and also found your answer.
Click to expand...
Click to collapse
Buddy @artigasperez its sltushar, not situshar

No Command screen, what from there?
My Nokia 6 suddenly stopped recognizing my security pattern the other day. I have tried to do the Hard Reset (+ and Power and "home" buttons), and finally managed to get to a screen that read "No Command" and had a little green guy lying on his back. What am I supposed to do from there? I apologize for asking such a basic question, but I am completely lost. Any help is much appreciated. Thanks!

When you at "no command" screen press Volume UP & Power simultaneously, then release Power button to get into recovery menu.

Thank you - how long after you release the Power button do you continue to hold the + button? Nothing happened for the longest time, and then the phone just rebooted (back to the Pattern screen, where it says I'm doing it wrong). I will get it back to "No Command" and try again. I really appreciate your help. (I've tried three times now, same thing happens each time.)
qwertysmerty said:
When you at "no command" screen press Volume UP & Power simultaneously, then release Power button to get into recovery menu.
Click to expand...
Click to collapse

Sorry, stupid me. Press Volume UP & Power simultaneously, then release Volume UP button to get into recovery menu

OK, got it - Wiped data/factory reset & cache partition ... now what? Thanks for the help!
qwertysmerty said:
Sorry, stupid me. Press Volume UP & Power simultaneously, then release Volume UP button to get into recovery menu
Click to expand...
Click to collapse
---------- Post added at 02:06 AM ---------- Previous post was at 01:56 AM ----------
I got it, I believe - at least, I am back to a "Welcome" screen on my phone. Thank you SO MUCH for the help!
heatheranne said:
OK, got it - Wiped data/factory reset & cache partition ... now what? Thanks for the help!
Click to expand...
Click to collapse

I have Wiped data/factory reset & cache partition but still no Command. kindly help

akinpeluvictor said:
I have Wiped data/factory reset & cache partition but still no Command. kindly help
Click to expand...
Click to collapse
What are u trying to do before getting the message?

akinpeluvictor said:
I have Wiped data/factory reset & cache partition but still no Command. kindly help
Click to expand...
Click to collapse
I try to update mu phone to Android 8.0 after that my phone download automatically next security patch.i tap to reboot to install.
But my phone stuck on "no command"
I try to wipe cache and data.but still no command and phone not booting
Only showa Android logo
Please help me

sajjadaf said:
I try to update mu phone to Android 8.0 after that my phone download automatically next security patch.i tap to reboot to install.
But my phone stuck on "no command"
I try to wipe cache and data.but still no command and phone not booting
Only showa Android logo
Please help me
Click to expand...
Click to collapse
Step 1. Plug in a usb charger to the phone, then quickly press vol+ and power button to get into the "No command screen"
Step 2. Again, press the vol+ and power button AND press the HOME button, then you will see the Recovery menu .
See the solution here :good:

Mayersdz said:
i cant do hard reset because i get no command and no recovry mode
any solutions ?
Click to expand...
Click to collapse
Hi based on this how did you sort out the issue. I have a Nokia 6 model TA-1024 it is stuck on the No command screen
---------- Post added at 12:34 PM ---------- Previous post was at 12:21 PM ----------
artigasperez said:
I have a nokia 6 1025 (ex-AmazonPrime) flashed via OST with june firmware, and update via sd card recovery with ota updates until december. Then I flashed Oreo Beta in january.
All worked fine.
Now i want to update to Oreo final. The zip is in the SD card, but when i try to put in recovery mode there is only the "no command" message.
I tried to get into recovery with both methods, with volumeup+power keys, and with "adb reboot recovery". Always the same "no command" message
The suggested solution, pressing volumeup and power together does not work.
Click to expand...
Click to collapse
Hi similar situation here, how did you go about it

sltushar said:
Just press once volume up and power button together when you see the no command
You will get the recovery
Click to expand...
Click to collapse
I have a Samsung galaxy s5, phone keeps rebooting into recovery mode tried wiping cache partition, factory reset all failing to work. now want to install custom firmware but the reboot to bootloader function wont work it quickly flashes a no command screen then goes back to Android recovery screen. How can I get past this?

Flash it thru Odin, whichever is supported right now, then unlock the bootloader for custom roms. If you dont know the process of unlocking bootloader then ask me when you finish installing official firmware via odin

sltushar said:
Flash it thru Odin, whichever is supported right now, then unlock the bootloader for custom roms. If you dont know the process of unlocking bootloader then ask me when you finish installing official firmware via odin
Click to expand...
Click to collapse
Thanks but it wont go into download mode it keeps going back to recovery mode any time I try to go to download mode unless there is another way it am not aware of to flash without going into download mode

$25 Paypal TO *YOU* for fixing VKY-L29 boot issues / possibly brick

Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA

roosta said:
Hey guys,
A friend of mine handed me a phone I used a few years ago - a Huawei P10+. The problem is, it won't boot. A friend offered a small bounty - so I thought I'd extend that small bounty to people here for immediate assistance. If you take Paypal, there $25 USD up for grabs if your links/instructions and assistance lead to unbricking - correct booting of the phone....
WHAT WE KNOW:
- VKY-L29 dual sim phone
- Previously been successfully rooted and was functioning fine
- Previous User may have tried wiping EVERYTHING (unsuccessfully, obviously) for re-installation of stock ROM
THE PROBLEM:
The phone displays the white/orange text screen, stating "Your device has been unlocked and can't be trusted. To learn more visit: http://zh.ui.vmall.com/emotiondownload.php?mod=restore
(1) Press power to continue .... nothing happens when pressed
(2) Press volume up for 3 secs to enter ERecovery to restore your device ... this works, but CANNOT download, or fails to download package over WIFI (only other options are to shutdown/reboot)
(3) Your device will continue to boot 5 seconds later if no operation ... nothing happens, it just hangs on this screen - even when prompt shows "Your device is rebooting now"
It doesn't matter if this stays rooted or not, we just need to successfully reinstall the STOCK ROM and booting/functioning normally.
Any assistance is appreciated.
Regards
RoOSTA
Click to expand...
Click to collapse
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.

LesterDMolester said:
Boot in eRecovery by holding the Volume Up button, after booting in eRecovery just download the latest package via connecting to a Wi-Fi network and it should boot up just fine.
Click to expand...
Click to collapse
Hey,
Perhaps read point 2 in my message first..?
RoOSTA

roosta said:
Hey,
Perhaps read point 2 in my message first..?
RoOSTA
Click to expand...
Click to collapse
Try downloading an older firmware extract the contents of the .app file using huawei firmware extractor and flash system.img recovery_ramdisk.img oeminfo.img product.img and vendor.img using fastboot and if the phone boots up just update it to a newer firmware, that's how i did it to my P10 Plus, it didn't wanna download via eRecovery too, sorry for the misunderstanding i forgot that it doesn't wanna download for you, i don't have the device with me now because i broke my display (again) so it's getting fixed but it won't be done untill saturday, i'll upload the firmware i used so that you can try too.

if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.

LesterDMolester said:
if the bootloader is unlocked flash twrp using the command: fastboot flash recovery_ramdisk "path to TWRP.img"
after flashing type: fastboot reboot and immediately start pressing the Volume Up and power button untill the HUAWEI logo shows up, after booting to TWRP flash oeminfo.img using the install option in TWRP, after that reboot and try downloading the firmware using eRecovery again, hopefully this time it will let you download it.
Click to expand...
Click to collapse
Thanks Lester I will try this when Ian home and let you know how I go...

roosta said:
Thanks Lester I will try this when Ian home and let you know how I go...
Click to expand...
Click to collapse
Dude pls wait don't try this i found another way, i bricked my phone accidentally today and i found a way, gonna take me some time to explain but i'll try my best.

So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.

Hi Lester, it's been an eternity since I was online here as I put this on the back-burner with more pressing work and family priorities. Thank you very much for providing the files. I noticed the ROM firmware is EU, when i am outside of EU....but shouldn't be too big of a problem.... I am getting around to doing all of this now, I have downloaded the files. When are you typically online to chat about this?
RoOSTA

It cannot boot into TWRP, only the eRecovery. No option to flash anything on SD card, other than connecting to WIFI...

Hii roosta,
I might have some problem with you, let me facing your thread , I 'like to learn too how to make my P1o plus back to normal again, it's being long time for me to bring this up...

LesterDMolester said:
So first of all download this firmware here extract it on your pc and boot to bootloader and flash TWRP_kirin.img to recovery_ramdisk, after that reboot the phone and boot in recovery via holding the volume up and power button, when in TWRP copy the dload folder from the firmware you extracted on your pc to your phone after that copy the RECOVERY8_NoCheck.img to your phone and flash it as recovery ramdisk via the install option in TWRP, power off your phone and press and hold the volume buttons and the power button and wait for it to boot and let it install the update, i really hope this helps you, it helped me after struggling with it all day long.
Click to expand...
Click to collapse
I had try to download from ( https://androidhost.ru/29Qt ) ....but its need much time event with IDM ( 20hrs ) )