Database Users

[Q] Stuck Android logo only

Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards

subr4t4 said:
Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
Click to expand...
Click to collapse
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?

dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Probably not a good idea for him to answer that if it's the latter.

dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Thanks for reply
Trying to factory wipe by following some hard reset manual but none worked for me.
No, password i know still i can enter.
Trying to restore with Update or Full package.
Acer_A500_0.000.00_4.017.07_EMEA_CUS7_1311771237783_253e5e46.zip
Acer_A500_0.000.00_4.010.42_EMEA_GEN3_1311244577711_036d89ae New.zip
Tried with this 2 files, but none worked yet.
which file i ve to try from here ?
http://forum.xda-developers.com/showthread.php?t=1113878
??

anyone else ? i m still stuck

Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.

subr4t4 said:
Tried with this 2 files, but none worked yet.
Click to expand...
Click to collapse
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?

ThatGeekGuy said:
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
Click to expand...
Click to collapse
Tried exactly same as u said, it shows "Erasing cach before sd update" then it brings recovery icon. nothing........
sc2k said:
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
Click to expand...
Click to collapse
Installation was 80% but not success........ stuck @ Recovery logo

anyone else with any other idea? m still stuck......

I have the same issues. I have tried installing new roms, and still get the same issues. Any ideas would be great

Nexus 4 stock Recovery NO COMMAND issue

hello there..i bought my nexus 4 yesterday..its AWESOME!!..so i wanted to start flashing some custom roms etc..so i wanted to boot into stock recovery and see how the new one looks like..when i tried booting into it..i get a RED triangle with the android sleeping..can someone help me..wuold be highly appreciated..and thanks in advance..

sumeetp said:
hello there..i bought my nexus 4 yesterday..its AWESOME!!..so i wanted to start flashing some custom roms etc..so i wanted to boot into stock recovery and see how the new one looks like..when i tried booting into it..i get a RED triangle with the android sleeping..can someone help me..wuold be highly appreciated..and thanks in advance..
Click to expand...
Click to collapse
I'm new to nexus family too and had a lot of problems with it. (Never have problems but this recovery cost me a lot of time).
The solution is:
When you are EXACTLY at the red exclamation mark screen.
1) Press and hold POWER
2) Press volume UP.
That should show the options in less than 2 seconds.
Sent from my Nexus 4 using Tapatalk 2

thesebastian said:
I'm new to nexus family too and had a lot of problems with it. (Never have problems but this recovery cost me a lot of time).
The solution is:
When you are EXACTLY at the red exclamation mark screen.
1) Press and hold POWER
2) Press volume UP.
That should show the options in less than 2 seconds.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
thanx mate..worked like a charm

I am experiencing the same "no command" issue, already tried the volume up + power and nothing happens, if I flash CWM touch 6.0.3.1 everything works but I can't go back to stock recovery no matter what, any advise?
Already flashed stock recovery using Wugfresh's Nexus Root toolkit but the "no command" problem persists.
Thank you.

lsv-1 said:
I am experiencing the same "no command" issue, already tried the volume up + power and nothing happens, if I flash CWM touch 6.0.3.1 everything works but I can't go back to stock recovery no matter what, any advise?
Already flashed stock recovery using Wugfresh's Nexus Root toolkit but the "no command" problem persists.
Thank you.
Click to expand...
Click to collapse
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up

thephantom said:
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
Click to expand...
Click to collapse
Yeap, same thing, I press and hold the power and then I press the volume up, nothing happens. I even formatted the phone completely using the 4.2.2 image from google, nothing, the no command error keeps coming up, the only way to have a recovery is flashing CWM touch.
---------- Post added at 10:37 AM ---------- Previous post was at 09:44 AM ----------
I've got my N4 maybe a month ago, I installed the 4.2.2 OTA as soon as I got it, the I proceeded to unlock it and root it, one day someone recommended to clear the cache of the phone using the stock recovery (which I thought I had / to fix another problem that I was having) I went to fastboot and tried to access recovery, BOOM, just an android laying down with a red exclamation mark, no "no command" error at all. I downloaded CWM touch and flashed it using Nexus Root Toolkit, that worked fine, but I didn't want a custom recovery and also I needed to fix a 3G latency problem that I was having, after some reading I saw that someone recommended a full flash using the stock google image.
A couple of days I proceeded to flash the factory image, I installed it, after that I did a factory reset from android itself. After doing all that I wanted to clear the cache with the stock recovery just in case, BOOM, an an android laying down with a red exclamation mark and this time with a "no command" error. Tried the trick of holding the power and pressing the volume up, NOTHING HAPPENS!
Right now I am using CWM Touch.
Any suggestion?
Thank you.

No real solution??? Sad...
---------- Post added at 02:13 PM ---------- Previous post was at 02:09 PM ----------
thephantom said:
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
Click to expand...
Click to collapse
Nothing, this answer is unhelpful

I have this issue as well. I tried to "unroot" my N4 (and Im a noob at this), and I think I did something wrong because when I access recovery mode from the bootloader I see the "dead android" but no matter what I do I dont see the control/menu. I tried:
- holding all buttons at the same time
- holding the power button and the down button (in sequence)
- holding the power button and the up button (in sequence)
So now I can not boot my Nexus, I can not wipe my Nexus and I can not access it from the PC. I was running 4.3 and I used the "How to Unroot Nexus 4 to Stock 4.2 Jelly Bean on Windows!" youtube guide ( I am not allowed to post links) to unroot my device (nexus 4), where I fail at 8:45, I simply dont see that menu popping up. Instead, my Nexus shuts down or reboots.
Please help

Is there no fix for this?
I decided to go back to stock to get 4.3. I flashed 4.2.2 using the Nexus toolkit and then got 4.3 via an OTA after this I rooted my phone. As the OTA worked I would imagine that the stock recovery was working. When I tried to install the latest OTA I got the no command issue. I can flash cwm recovery no problem. But when I try to flash stock recovery either via a toolkit or via fastboot command it does not work - no command. And holding in power and then volume up doe nothing. Any advice? I suppoe I cando a full wipe flash the stock 4.3 image and see if this helps. Has anyone had any success fixing this problem?

I have the same issue.
Even when trying to get to stock recovery through Nexus Root Toolkit gets me a NO COMMAND screen.
It seems like the recovery is not there.
Still looking for an answer - any help?
finbaar said:
Is there no fix for this?
I decided to go back to stock to get 4.3. I flashed 4.2.2 using the Nexus toolkit and then got 4.3 via an OTA after this I rooted my phone. As the OTA worked I would imagine that the stock recovery was working. When I tried to install the latest OTA I got the no command issue. I can flash cwm recovery no problem. But when I try to flash stock recovery either via a toolkit or via fastboot command it does not work - no command. And holding in power and then volume up doe nothing. Any advice? I suppoe I cando a full wipe flash the stock 4.3 image and see if this helps. Has anyone had any success fixing this problem?
Click to expand...
Click to collapse

When you get the no command prompt do the following.
Press and hold the power button followed by pressing and holding the volume up button. Release only the volume up button after 2 seconds and you will be in recovery.
Sent from my Nexus 4 using XDA Premium 4 mobile app
See this
http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13

jangietka said:
I have the same issue.
Even when trying to get to stock recovery through Nexus Root Toolkit gets me a NO COMMAND screen.
It seems like the recovery is not there.
Still looking for an answer - any help?
Click to expand...
Click to collapse
Seems that you have the stock recovery installed (that Android laying on its back with a red triangle is the stock recovery).
If I'm not missunderstanding your issue, it shouldn't really be an issue but it's just like how it should be.

Getting No Command while entering Recovery Mode in my Nexus 4
Hi All,
I am also facing the same problem, I got kitkat update, the update (239 MB) downloaded but while installing, it shows No Command with Red Triangle. My Device is rooted.
Please help me..
Regards,
Ajay

got the same problem
i had the no command problem and then i watched videos how to get recovery mod
i installed teamwin recovery mod and i had NO root for android 4.4.3
at nexus 4 toolkit thare is still no version of 4.4.3
how do i fix it?
how do i root it without flashing image?
thanks
~oren

finbaar said:
When you get the no command prompt do the following.
Press and hold the power button followed by pressing and holding the volume up button. Release only the volume up button after 2 seconds and you will be in recovery.
Sent from my Nexus 4 using XDA Premium 4 mobile app
See this
http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
Click to expand...
Click to collapse
This worked! Thanks!
The trick is release only volume up button.

Yes, but the OTA update still does not install with this method.

"No Command" issue solved for Zuum 9330
I want to thank every one of you guys. I had same issue with my phablet. By reading your comments I got ideas to try some key combinations, and factory reset my phone. Here is what I did:
1) Power down the phone
2) Press and hold "volume up", then Press and hold "power" button until Android logo with the message "no command" shows up
3) Press and hold "volume down", then Press "back" button then release "back" button and the menu will show up. Then release "volume down".
4) use "volume up" or "volume down" to navigate menu
5) to execute selection, use "home" button
I hope it helps someone.
If so, please tell me.

Total first timer, flash to stock as had messed up sd card partition trying to flash custom ROM, really worried when couldn't access recovery after stock flash. Thank you thank you thank you, this totally worked!!!

thank you a lot. saved my phone. i thought i will through away the nexus 4 but the combination of no command power button and volume up did well

Hope this helps, you press and release volume up! worked perfectly
Performing a factory reset may take some time, so make sure that you plug your device into a power source before you start. If your phone becomes unresponsive at any point during these steps, you can restart it by holding down the Power button for several seconds.
If your phone is on, turn it off.
Press and hold the Volume Down button and the Power button at the same time until the device turns on. You'll see the word "Start" with an arrow around it.
Press the Volume Down button twice to highlight "Recovery".
Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark and the words "No command".
While holding down the Power button, press and release the Volume Up button once.
Press the Volume Down button twice to highlight "wipe data/factory reset" and press the Power button to select it.
Press the Volume Down button seven times to highlight "Yes - erase all user data" and press the Power button to select it.
After the reset is complete, press the Power button to select the option to reboot your device.
When you've finished, follow these steps to restore your data.

[Q] "No command" when booting to recover on 4.2.1

So I've become tired of pressing "Check now" and being lied to about my system being up to date on the system update screen, and decided to sideload 4.2.2 myself.
This requires booting into recovery mode, but doing so just shows an image on Android on its back with a red triangle over its chest, and "No command" underneath it.
adb reboot recovery yields the same result, as does booting into the bootloader and choosing recovery from there.
After leaving it on this screen for a while, the system automatically does a normal boot.
This Nexus 10 has never been rooted or unlocked: the only thing I've ever done to it is to update to 4.2.1, for which I did wait for the OTA update to become available for my device.
So I'm currently stuck. Anyone have any idea what's going on?

The red triangle is stock recovery. Try hitting one of the volume buttons to get you into the next part of stock recovery. Once there you can select to sideload. I haven't played with stock recovery on the N10 recently so don't remember which volume button and if your press it or hold it.
EDIT: It looks like tapping the power button and volume up button at the same time works. Don't hold the buttons, just tap ... tap it in ...
EDIT2: Just realized you may be having some other issue after I saw someone else mention the "no command" piece.
http://forum.xda-developers.com/showpost.php?p=37926664&postcount=97

AHA!
Thank you! Knowing that there's a second step to get to the menu helped me to find this:
Press and Hold the Power button and then tap the Volume Up button within a second to display the menu. This can be a bit tricky if you don’t do it right so if your device reboots just try again.
Click to expand...
Click to collapse

I got OTA to 4.2.2 but after i applied and restart.. i got "no command " error message.. someone can tell me how to fix that please ?
4.2.1 stock rooted.

Same here....
What to do next?
plsss
rayki said:
I got OTA to 4.2.2 but after i applied and restart.. i got "no command " error message.. someone can tell me how to fix that please ?
4.2.1 stock rooted.
Click to expand...
Click to collapse

Once you get "no command" then hold power button and about a second after (if not less ) tap the +volume button . again just TAP the +volume button . don't hold the + volume button

davidmclaren said:
Once you get "no command" then hold power button and about a second after (if not less ) tap the +volume button . again just TAP the +volume button . don't hold the + volume button
Click to expand...
Click to collapse
Ok...done....but....if I want to go again to recovery mode,I have the same error"no command"
So ....
1h ago I've done the 4.2.2 update...OTA...at that point I had the first time this error....and the update was unsuccessful ....
Now...if I check for update ...nothing and recovery mode not working

I manage to get the update again (clear data and force close of google services framework) but...I can't install the update...
Please have a look at the attached pictures and please HELP ME !
Thank you

Mr.Symbol said:
Ok...done....but....if I want to go again to recovery mode,I have the same error"no command"
So ....
1h ago I've done the 4.2.2 update...OTA...at that point I had the first time this error....and the update was unsuccessful ....
Now...if I check for update ...nothing and recovery mode not working
Click to expand...
Click to collapse
I am in the exact same situation.
Launched the update after 4.2.2 Notification, the device restarted, error message then "No command". I restart manually with Power and Vol+.
My Nexus is fully fonctionnal but always in 4.2.1.
For info : My bootloader is unlocked and the devices is rooted.

I had the same problem. In my case, the thing was I had no recovery installed (the Nexus 10 tries to restore stock recovery if you install another one, and sometimes it fails).
I solved it by installing GooManager from the Play Store and using it to install another recovery.

reycat said:
I had the same problem. In my case, the thing was I had no recovery installed (the Nexus 10 tries to restore stock recovery if you install another one, and sometimes it fails).
I solved it by installing GooManager from the Play Store and using it to install another recovery.
Click to expand...
Click to collapse
Could you please elaborate further? I have the same problem (rooted and getting the No Command error) and i am absolutely not sure what to use the goomanager for and what difference it would make

I got the same problem, I have to flash the 4.0 factory image back, then got ota 4.2.1 and 4.2.2, that was before I realized that 4.2.2 factory image has been released by google. Now just wait for some tools to root the stock.

FWIW, go to https://www.youtube.com/watch?v=ZNEXCY-wHpw
at about 3:30 he deals with this
hold power and volume up really quickly

funkpod said:
FWIW, go to https://www.youtube.com/watch?v=ZNEXCY-wHpw
at about 3:30 he deals with this
hold power and volume up really quickly
Click to expand...
Click to collapse
FWIW, this a 2 year old topic.
People are talking about Jellybean here.
Please don't bump threads THIS old. Please find someone else to help out. Thanks for understanding.

this info was very helpful for me, i did the adb reboot recovery, then on the no command screen i tapped the volume + like two or three times and got into recovery, thank you so much!

Sm-g950f flashed with twrp without oem unlock

Hi guys I need your professional opinion the stupidity I done. I Flashed cf-auto root and without to enable OEM unlock i Flashed TWRP. After reboot the phone stuck on the Samsung logo.
Is the phone dead? Any chance to recover ?
Thanks for ur time

smpougi said:
Hi guys I need your professional opinion the stupidity I done. I Flashed cf-auto root and without to enable OEM unlock i Flashed TWRP. After reboot the phone stuck on the Samsung logo.
Is the phone dead? Any chance to recover ?
Thanks for ur time
Click to expand...
Click to collapse
Try flashing the stock firmware. I should work.

I have allready tried on odin says all ways fail. Then I tried with Samsung switch on recovery mode it says an unexpected error .

smpougi said:
I have allready tried on odin says all ways fail. Then I tried with Samsung switch on recovery mode it says an unexpected error .
Click to expand...
Click to collapse
try modded odin?

What is modded odin? Thanks

smpougi said:
What is modded odin? Thanks
Click to expand...
Click to collapse
Probably the Prince Cosmy edition.

Tried modded odin with the same result

have you tried button reset?
Make sure your Galaxy S8 is powered down.
Hold the Volume up, Bixby, and Power buttons at the same time, and keep them held down until you see the Samsung logo.
After 30 seconds, you should see the Android Recovery Menu. If your phone boots up as normal, try repeating the previous two steps.
Press the Volume down button four times, until Wipe data/Factory reset is highlighted. Select it using the Power button.
Press the Volume down button seven times until Yes — delete all user data is highlighted. Select it using the Power button, which triggers the reset process.
Once the factor reset is complete, press the Power button and select reboot system now.

Requesting Assistance with Bricked P8 Lite

Hello, I m battling this problem already 2 days, I have P8 Lite mobile phone.
Phone Originally came with ALE-L21 C432B132 but at that time I got update ALE-L21 C432B188 what made my phone 5.0.1 Android
So a few days ago I received Update ALE-L21 C432B587 in updater but what happened is the update stuck on 1 % then showed Error message
That I cant Install that and Phone Rebooted. And it stuck on the First LOGO and now the fun part starts.
I read Every single post, guide what was on google all Suggested to use fastboot and just Flash back to my Original ALE .
Ok, so I did all the Phone Unlocking by getting unlock code and then using fastboot to unlock the phone now my phone is unlocked and it shows that when I'm in fastboot.
I also put UPDATE.app in SDcard just in case but thing is I cant Access that Update menu Or Recovery menu With Button UP + Power Only thing what Works is Fastboot
So I Extracted the boot, System, Recovery, cust, placed in adb folder and run the Cmd if I write fastboot devices it shows my phone so all is ok . and when I do all the flash commands nothings are failing and all shows that is completed. but still I can't start my phone and the only volume down + power works other combinations have no reaction + It just stands on that logo it doesn't even reboot how others have it
I let it send there for 1 h and it was just That first Logo.
So I'm writing here maybe someone has some Suggestion how to Resurrect my phone I'm open now to any suggestions.

Flash TWRP recovery
Then flash any ROM you want by TWRP
You can get the ROMs via "firmware finder" application, it's in play store..

Thank you for your Answer . I Tried to Install TWRP Recovery but without a luck Phone just stays on LOGO and Only button Combination Works is Volume Down + Power what Goes in Fast boot. Maybe i dont know how to enter TWRP mode however non of Huawei button presses worked. Maybe there is other way to get in that Recovery mode .. Also when i turn on phone and im in that LOGO my phone is not recognized by my PC , ONLY if i enter Fastboot i can See my Phone in Device manager and in CMD writing fastboot Devices. if i write adb devices it shows nothing .
also i have question does it mattare how i write : fastboot flash boot boot.img because if i write fastboot flash BOOT boot.img i cant flash it only if all letters are small it goes in .

Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.

Positivity_ said:
Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.
Click to expand...
Click to collapse
run twrp press vol plus and power and diconnect your phone from pc.

Adi5 said:
run twrp press vol plus and power and diconnect your phone from pc.
Click to expand...
Click to collapse
I just flashed TWRP3.0.2.img and Did what you told i got same Error what you can see in image. is that wrong twrp version?

try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, if recovery2 is not corrupted it should work. Good Luck

redknight65 said:
try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, it should work
Click to expand...
Click to collapse
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.

Positivity_ said:
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.
Click to expand...
Click to collapse
how long did you wait after the vibration?
---------- Post added at 21:30 ---------- Previous post was at 21:29 ----------
also try to flash recovery2

redknight65 said:
how long did you wait after the vibration?
Click to expand...
Click to collapse
at last 2 min or even more buttons are pressed nothing happens
Yes i flashed Recovery2 too with the ROM i flashed now still the same
I did Steps like in tutorials
Starting with lowest Version then flashing up Still nothing.

Positivity_ said:
at last 2 min or even more buttons are pressed nothing happens
Click to expand...
Click to collapse
try to flash recovery2 and do that again

redknight65 said:
try to flash recovery2 and do that again
Click to expand...
Click to collapse
I just did it again .. nop it still just vibrates and nothing is happening.

Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
then I can't help you, sorry

Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.

RootingPro-18 said:
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.
Click to expand...
Click to collapse
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same

Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
Click to expand...
Click to collapse
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same
Click to expand...
Click to collapse
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery

RootingPro-18 said:
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery
Click to expand...
Click to collapse
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.

Positivity_ said:
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.
Click to expand...
Click to collapse
Noooo, B611 is for single sim. B612 is for Dual.

RootingPro-18 said:
Noooo, B611 is for single sim. B612 is for Dual.
Click to expand...
Click to collapse
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?

Positivity_ said:
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/general/security-update-ale-l21c432b611-single-t3688441 from here you can get lastest vesions