So I've become tired of pressing "Check now" and being lied to about my system being up to date on the system update screen, and decided to sideload 4.2.2 myself.
This requires booting into recovery mode, but doing so just shows an image on Android on its back with a red triangle over its chest, and "No command" underneath it.
adb reboot recovery yields the same result, as does booting into the bootloader and choosing recovery from there.
After leaving it on this screen for a while, the system automatically does a normal boot.
This Nexus 10 has never been rooted or unlocked: the only thing I've ever done to it is to update to 4.2.1, for which I did wait for the OTA update to become available for my device.
So I'm currently stuck. Anyone have any idea what's going on?
The red triangle is stock recovery. Try hitting one of the volume buttons to get you into the next part of stock recovery. Once there you can select to sideload. I haven't played with stock recovery on the N10 recently so don't remember which volume button and if your press it or hold it.
EDIT: It looks like tapping the power button and volume up button at the same time works. Don't hold the buttons, just tap ... tap it in ...
EDIT2: Just realized you may be having some other issue after I saw someone else mention the "no command" piece.
http://forum.xda-developers.com/showpost.php?p=37926664&postcount=97
AHA!
Thank you! Knowing that there's a second step to get to the menu helped me to find this:
Press and Hold the Power button and then tap the Volume Up button within a second to display the menu. This can be a bit tricky if you don’t do it right so if your device reboots just try again.
Click to expand...
Click to collapse
I got OTA to 4.2.2 but after i applied and restart.. i got "no command " error message.. someone can tell me how to fix that please ?
4.2.1 stock rooted.
Same here....
What to do next?
plsss
rayki said:
I got OTA to 4.2.2 but after i applied and restart.. i got "no command " error message.. someone can tell me how to fix that please ?
4.2.1 stock rooted.
Click to expand...
Click to collapse
Once you get "no command" then hold power button and about a second after (if not less ) tap the +volume button . again just TAP the +volume button . don't hold the + volume button
davidmclaren said:
Once you get "no command" then hold power button and about a second after (if not less ) tap the +volume button . again just TAP the +volume button . don't hold the + volume button
Click to expand...
Click to collapse
Ok...done....but....if I want to go again to recovery mode,I have the same error"no command"
So ....
1h ago I've done the 4.2.2 update...OTA...at that point I had the first time this error....and the update was unsuccessful ....
Now...if I check for update ...nothing and recovery mode not working
I manage to get the update again (clear data and force close of google services framework) but...I can't install the update...
Please have a look at the attached pictures and please HELP ME !
Thank you
Mr.Symbol said:
Ok...done....but....if I want to go again to recovery mode,I have the same error"no command"
So ....
1h ago I've done the 4.2.2 update...OTA...at that point I had the first time this error....and the update was unsuccessful ....
Now...if I check for update ...nothing and recovery mode not working
Click to expand...
Click to collapse
I am in the exact same situation.
Launched the update after 4.2.2 Notification, the device restarted, error message then "No command". I restart manually with Power and Vol+.
My Nexus is fully fonctionnal but always in 4.2.1.
For info : My bootloader is unlocked and the devices is rooted.
I had the same problem. In my case, the thing was I had no recovery installed (the Nexus 10 tries to restore stock recovery if you install another one, and sometimes it fails).
I solved it by installing GooManager from the Play Store and using it to install another recovery.
reycat said:
I had the same problem. In my case, the thing was I had no recovery installed (the Nexus 10 tries to restore stock recovery if you install another one, and sometimes it fails).
I solved it by installing GooManager from the Play Store and using it to install another recovery.
Click to expand...
Click to collapse
Could you please elaborate further? I have the same problem (rooted and getting the No Command error) and i am absolutely not sure what to use the goomanager for and what difference it would make
I got the same problem, I have to flash the 4.0 factory image back, then got ota 4.2.1 and 4.2.2, that was before I realized that 4.2.2 factory image has been released by google. Now just wait for some tools to root the stock.
FWIW, go to https://www.youtube.com/watch?v=ZNEXCY-wHpw
at about 3:30 he deals with this
hold power and volume up really quickly
funkpod said:
FWIW, go to https://www.youtube.com/watch?v=ZNEXCY-wHpw
at about 3:30 he deals with this
hold power and volume up really quickly
Click to expand...
Click to collapse
FWIW, this a 2 year old topic.
People are talking about Jellybean here.
Please don't bump threads THIS old. Please find someone else to help out. Thanks for understanding.
this info was very helpful for me, i did the adb reboot recovery, then on the no command screen i tapped the volume + like two or three times and got into recovery, thank you so much!
Related
Ok, I flashed Trinity kernel with no issues, phone booted up ran great. Then I pushed PA to my phone to flash using the Nexus Root Toolkit and when it rebooted me into TWRP, I proceeded to wipe sys and dalvik and try to flash the zip. It failed. No big deal, some of my flashes have failed before on this N7. Not sure why, but I usually just reboot and press on. This time however, as it starts to boot I get a msg saying "unfortunately Setup Wizard has stopped" with an "ok" button, but when I press the "ok" button it just cycles back to the same button. I have tried powering down, but the Ok button sits on top of the power off confirmation button and so I can't even turn it off to reboot into recovery mode. Anyone got any suggestions? The toolkit won't seem to reboot it into recovery either, not sure why unless the ok button is overriding everything. Help?
UPDATE: I managed to get the trick of hitting the ok button fast enough to get to the power confirm button behind it, but when I boot it into recovery mode, I get the droid with the red ! mark and can't seem to get it to do anything else. I have tried booting into recovery from Toolkit, but it says I need to put it into USB debugging mode, which of course I can't do because I can't get past the failed setup...
UPDATE: Ok, I have managed to finagle it into resetting to factory stock ROM. So I have it up and running again and just have to start from scratch. But at least I am able to.
How'd ya do that
Lazarus416 said:
Ok, I flashed Trinity kernel with no issues, phone booted up ran great. Then I pushed PA to my phone to flash using the Nexus Root Toolkit and when it rebooted me into TWRP, I proceeded to wipe sys and dalvik and try to flash the zip. It failed. No big deal, some of my flashes have failed before on this N7. Not sure why, but I usually just reboot and press on. This time however, as it starts to boot I get a msg saying "unfortunately Setup Wizard has stopped" with an "ok" button, but when I press the "ok" button it just cycles back to the same button. I have tried powering down, but the Ok button sits on top of the power off confirmation button and so I can't even turn it off to reboot into recovery mode. Anyone got any suggestions? The toolkit won't seem to reboot it into recovery either, not sure why unless the ok button is overriding everything. Help?
UPDATE: I managed to get the trick of hitting the ok button fast enough to get to the power confirm button behind it, but when I boot it into recovery mode, I get the droid with the red ! mark and can't seem to get it to do anything else. I have tried booting into recovery from Toolkit, but it says I need to put it into USB debugging mode, which of course I can't do because I can't get past the failed setup...
UPDATE: Ok, I have managed to finagle it into resetting to factory stock ROM. So I have it up and running again and just have to start from scratch. But at least I am able to.
Click to expand...
Click to collapse
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
jasonmrouse said:
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
Click to expand...
Click to collapse
Hold all three hardware buttons for 30 seconds and the device reboots to the bootloader. Then, fastboot flash the stock image.
jasonmrouse said:
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
Click to expand...
Click to collapse
You can get to the bootloader (fastboot mode) FROM ANY STATE.
Read that again - from any state.
See "bootloader interrupt" in this thread:
[REF] Nexus 7 Button Combinations
cheers
hello there..i bought my nexus 4 yesterday..its AWESOME!!..so i wanted to start flashing some custom roms etc..so i wanted to boot into stock recovery and see how the new one looks like..when i tried booting into it..i get a RED triangle with the android sleeping..can someone help me..wuold be highly appreciated..and thanks in advance..
sumeetp said:
hello there..i bought my nexus 4 yesterday..its AWESOME!!..so i wanted to start flashing some custom roms etc..so i wanted to boot into stock recovery and see how the new one looks like..when i tried booting into it..i get a RED triangle with the android sleeping..can someone help me..wuold be highly appreciated..and thanks in advance..
Click to expand...
Click to collapse
I'm new to nexus family too and had a lot of problems with it. (Never have problems but this recovery cost me a lot of time).
The solution is:
When you are EXACTLY at the red exclamation mark screen.
1) Press and hold POWER
2) Press volume UP.
That should show the options in less than 2 seconds.
Sent from my Nexus 4 using Tapatalk 2
thesebastian said:
I'm new to nexus family too and had a lot of problems with it. (Never have problems but this recovery cost me a lot of time).
The solution is:
When you are EXACTLY at the red exclamation mark screen.
1) Press and hold POWER
2) Press volume UP.
That should show the options in less than 2 seconds.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
thanx mate..worked like a charm
I am experiencing the same "no command" issue, already tried the volume up + power and nothing happens, if I flash CWM touch 6.0.3.1 everything works but I can't go back to stock recovery no matter what, any advise?
Already flashed stock recovery using Wugfresh's Nexus Root toolkit but the "no command" problem persists.
Thank you.
lsv-1 said:
I am experiencing the same "no command" issue, already tried the volume up + power and nothing happens, if I flash CWM touch 6.0.3.1 everything works but I can't go back to stock recovery no matter what, any advise?
Already flashed stock recovery using Wugfresh's Nexus Root toolkit but the "no command" problem persists.
Thank you.
Click to expand...
Click to collapse
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
thephantom said:
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
Click to expand...
Click to collapse
Yeap, same thing, I press and hold the power and then I press the volume up, nothing happens. I even formatted the phone completely using the 4.2.2 image from google, nothing, the no command error keeps coming up, the only way to have a recovery is flashing CWM touch.
---------- Post added at 10:37 AM ---------- Previous post was at 09:44 AM ----------
I've got my N4 maybe a month ago, I installed the 4.2.2 OTA as soon as I got it, the I proceeded to unlock it and root it, one day someone recommended to clear the cache of the phone using the stock recovery (which I thought I had / to fix another problem that I was having) I went to fastboot and tried to access recovery, BOOM, just an android laying down with a red exclamation mark, no "no command" error at all. I downloaded CWM touch and flashed it using Nexus Root Toolkit, that worked fine, but I didn't want a custom recovery and also I needed to fix a 3G latency problem that I was having, after some reading I saw that someone recommended a full flash using the stock google image.
A couple of days I proceeded to flash the factory image, I installed it, after that I did a factory reset from android itself. After doing all that I wanted to clear the cache with the stock recovery just in case, BOOM, an an android laying down with a red exclamation mark and this time with a "no command" error. Tried the trick of holding the power and pressing the volume up, NOTHING HAPPENS!
Right now I am using CWM Touch.
Any suggestion?
Thank you.
No real solution??? Sad...
---------- Post added at 02:13 PM ---------- Previous post was at 02:09 PM ----------
thephantom said:
it's power then volume up. you're doing it the wrong way. you need to press power first and while pressing on that you press volume up
Click to expand...
Click to collapse
Nothing, this answer is unhelpful
I have this issue as well. I tried to "unroot" my N4 (and Im a noob at this), and I think I did something wrong because when I access recovery mode from the bootloader I see the "dead android" but no matter what I do I dont see the control/menu. I tried:
- holding all buttons at the same time
- holding the power button and the down button (in sequence)
- holding the power button and the up button (in sequence)
So now I can not boot my Nexus, I can not wipe my Nexus and I can not access it from the PC. I was running 4.3 and I used the "How to Unroot Nexus 4 to Stock 4.2 Jelly Bean on Windows!" youtube guide ( I am not allowed to post links) to unroot my device (nexus 4), where I fail at 8:45, I simply dont see that menu popping up. Instead, my Nexus shuts down or reboots.
Please help
Is there no fix for this?
I decided to go back to stock to get 4.3. I flashed 4.2.2 using the Nexus toolkit and then got 4.3 via an OTA after this I rooted my phone. As the OTA worked I would imagine that the stock recovery was working. When I tried to install the latest OTA I got the no command issue. I can flash cwm recovery no problem. But when I try to flash stock recovery either via a toolkit or via fastboot command it does not work - no command. And holding in power and then volume up doe nothing. Any advice? I suppoe I cando a full wipe flash the stock 4.3 image and see if this helps. Has anyone had any success fixing this problem?
I have the same issue.
Even when trying to get to stock recovery through Nexus Root Toolkit gets me a NO COMMAND screen.
It seems like the recovery is not there.
Still looking for an answer - any help?
finbaar said:
Is there no fix for this?
I decided to go back to stock to get 4.3. I flashed 4.2.2 using the Nexus toolkit and then got 4.3 via an OTA after this I rooted my phone. As the OTA worked I would imagine that the stock recovery was working. When I tried to install the latest OTA I got the no command issue. I can flash cwm recovery no problem. But when I try to flash stock recovery either via a toolkit or via fastboot command it does not work - no command. And holding in power and then volume up doe nothing. Any advice? I suppoe I cando a full wipe flash the stock 4.3 image and see if this helps. Has anyone had any success fixing this problem?
Click to expand...
Click to collapse
When you get the no command prompt do the following.
Press and hold the power button followed by pressing and holding the volume up button. Release only the volume up button after 2 seconds and you will be in recovery.
Sent from my Nexus 4 using XDA Premium 4 mobile app
See this
http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
jangietka said:
I have the same issue.
Even when trying to get to stock recovery through Nexus Root Toolkit gets me a NO COMMAND screen.
It seems like the recovery is not there.
Still looking for an answer - any help?
Click to expand...
Click to collapse
Seems that you have the stock recovery installed (that Android laying on its back with a red triangle is the stock recovery).
If I'm not missunderstanding your issue, it shouldn't really be an issue but it's just like how it should be.
Getting No Command while entering Recovery Mode in my Nexus 4
Hi All,
I am also facing the same problem, I got kitkat update, the update (239 MB) downloaded but while installing, it shows No Command with Red Triangle. My Device is rooted.
Please help me..
Regards,
Ajay
got the same problem
i had the no command problem and then i watched videos how to get recovery mod
i installed teamwin recovery mod and i had NO root for android 4.4.3
at nexus 4 toolkit thare is still no version of 4.4.3
how do i fix it?
how do i root it without flashing image?
thanks
~oren
finbaar said:
When you get the no command prompt do the following.
Press and hold the power button followed by pressing and holding the volume up button. Release only the volume up button after 2 seconds and you will be in recovery.
Sent from my Nexus 4 using XDA Premium 4 mobile app
See this
http://forum.xda-developers.com/showpost.php?p=44388152&postcount=13
Click to expand...
Click to collapse
This worked! Thanks!
The trick is release only volume up button.
Yes, but the OTA update still does not install with this method.
"No Command" issue solved for Zuum 9330
I want to thank every one of you guys. I had same issue with my phablet. By reading your comments I got ideas to try some key combinations, and factory reset my phone. Here is what I did:
1) Power down the phone
2) Press and hold "volume up", then Press and hold "power" button until Android logo with the message "no command" shows up
3) Press and hold "volume down", then Press "back" button then release "back" button and the menu will show up. Then release "volume down".
4) use "volume up" or "volume down" to navigate menu
5) to execute selection, use "home" button
I hope it helps someone.
If so, please tell me.
Total first timer, flash to stock as had messed up sd card partition trying to flash custom ROM, really worried when couldn't access recovery after stock flash. Thank you thank you thank you, this totally worked!!!
thank you a lot. saved my phone. i thought i will through away the nexus 4 but the combination of no command power button and volume up did well
Hope this helps, you press and release volume up! worked perfectly
Performing a factory reset may take some time, so make sure that you plug your device into a power source before you start. If your phone becomes unresponsive at any point during these steps, you can restart it by holding down the Power button for several seconds.
If your phone is on, turn it off.
Press and hold the Volume Down button and the Power button at the same time until the device turns on. You'll see the word "Start" with an arrow around it.
Press the Volume Down button twice to highlight "Recovery".
Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark and the words "No command".
While holding down the Power button, press and release the Volume Up button once.
Press the Volume Down button twice to highlight "wipe data/factory reset" and press the Power button to select it.
Press the Volume Down button seven times to highlight "Yes - erase all user data" and press the Power button to select it.
After the reset is complete, press the Power button to select the option to reboot your device.
When you've finished, follow these steps to restore your data.
Let me start off by saying I am a noob. I am not rooted. Anyway, I tried to install Android 4.4 KitKat (the OTA download link) and I got to the Android with the red exclamation mark. It said "no command". After that, I tried to continue to the next step, and I couldn't. I can't do anything with it now. I really need help with this now!
HeadFL said:
Let me start off by saying I am a noob. I am not rooted. Anyway, I tried to install Android 4.4 KitKat (the OTA download link) and I got to the Android with the red exclamation mark. It said "no command". After that, I tried to continue to the next step, and I couldn't. I can't do anything with it now. I really need help with this now!
Click to expand...
Click to collapse
I believe this is the Recovery mode.
Press the power button and volume up, it will show you a menu with reboot as a first option.
Press the power again (reboot device highlighted) to restart the device.
Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
sebas156 said:
Here's my problem.
I can't get into recovery by pressing the power up, home, power buttons. It says it's 'entering recovery', but then it gives another 'buzz' (like when the phone starts), and just reboots normally.
I used to be able to get into recovery with ROMManager, by selecting the 'boot into recovery'. Then I just got into my CWM and could do whatever I wanted. Now I can't do that anymore, probably because my device is not rooted atm (got CM12 on it though). I wanted to root it, but I can't get into recovery.
I already tried flashing TWRP with Odin (download mode does work), but that doesn't work either. I obviously searched google and XDA for the problem, and I saw suggestions for other phones, like updating the bootloader. But I can't find any information or files for updating the bootloader.
Click to expand...
Click to collapse
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Joku1981 said:
Reboots trying to go custom recovery are normal sometimes.
Lil guide for enter custom recovery (TWRP):
1. Power off your device completely.
2. Press and hold Volume Up, Home and Power buttons simultaneously.
3. Release only the Power button when the logo of Samsung in white appears (you will see little letters in blue and red on the top left of the screen).
4. You will see the blue logo of TWRP (pic attached) then and you can release all buttons and start to navigate for the custom recovery.
Click to expand...
Click to collapse
Thanks for the reply, but I don't think you understood my question. I know how to get into recovery when it all works. I've done it many times before. The problem is that it shuts down while booting into recovery, and then just reboots normally.
I only installed TWRP because CWM wouldn't work, but TWRP doesn't either. So I guess it has to do with how the device boots into recovery, regardless of what the recovery is.
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
sebas156 said:
Anyone? I kinda want to flash another ROM, but I'm unable to right now.
Click to expand...
Click to collapse
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
MAX 404 said:
hi
Check your power button.....it happened before , a defective power botton will make it hard to enter recovery or download mode
Click to expand...
Click to collapse
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
sebas156 said:
I don't think that's the problem. I have 0 issues with the power button. Also, when I try to boot into recovery, it actually says it's 'starting recovery'. Then it stops with a buzz and reboots.
Click to expand...
Click to collapse
may be one of the other push buttons.....
try to get into recovery with out pressing the power button and see if is possible...if so then the problem is coming from there.
i cant do hard reset because i get no command and no recovry mode
any solutions ?
Mayersdz said:
i cant do hard reset because i get no command and no recovry mode
any solutions ?
Click to expand...
Click to collapse
Just press once volume up and power button together when you see the no command
You will get the recovery
I have a nokia 6 1025 (ex-AmazonPrime) flashed via OST with june firmware, and update via sd card recovery with ota updates until december. Then I flashed Oreo Beta in january.
All worked fine.
Now i want to update to Oreo final. The zip is in the SD card, but when i try to put in recovery mode there is only the "no command" message.
I tried to get into recovery with both methods, with volumeup+power keys, and with "adb reboot recovery". Always the same "no command" message
The suggested solution, pressing volumeup and power together does not work.
artigasperez said:
I have a nokia 6 1025 (ex-AmazonPrime) flashed via OST with june firmware, and update via sd card recovery with ota updates until december. Then I flashed Oreo Beta in january.
All worked fine.
Now i want to update to Oreo final. The zip is in the SD card, but when i try to put in recovery mode there is only the "no command" message.
I tried to get into recovery with both methods, with volumeup+power keys, and with "adb reboot recovery". Always the same "no command" message
The suggested solution, pressing volumeup and power together does not work.
Click to expand...
Click to collapse
Try pressing them together few times, its lil tricky
If it still doesn't work, then flash back mena firmware and then update till January patch, then install the final oreo, do not install beta oreo
You forget to press home button.
It should be volumeup+power+home button together.
Alvin Fung said:
You forget to press home button.
It should be volumeup+power+home button together.
Click to expand...
Click to collapse
Yes, i saw situshar answered volumeup+power+home in another thread, and it worked.
Returned here to say thanks and also found your answer.
artigasperez said:
Yes, i saw situshar answered volumeup+power+home in another thread, and it worked.
Returned here to say thanks and also found your answer.
Click to expand...
Click to collapse
Buddy @artigasperez its sltushar, not situshar
No Command screen, what from there?
My Nokia 6 suddenly stopped recognizing my security pattern the other day. I have tried to do the Hard Reset (+ and Power and "home" buttons), and finally managed to get to a screen that read "No Command" and had a little green guy lying on his back. What am I supposed to do from there? I apologize for asking such a basic question, but I am completely lost. Any help is much appreciated. Thanks!
When you at "no command" screen press Volume UP & Power simultaneously, then release Power button to get into recovery menu.
Thank you - how long after you release the Power button do you continue to hold the + button? Nothing happened for the longest time, and then the phone just rebooted (back to the Pattern screen, where it says I'm doing it wrong). I will get it back to "No Command" and try again. I really appreciate your help. (I've tried three times now, same thing happens each time.)
qwertysmerty said:
When you at "no command" screen press Volume UP & Power simultaneously, then release Power button to get into recovery menu.
Click to expand...
Click to collapse
Sorry, stupid me. Press Volume UP & Power simultaneously, then release Volume UP button to get into recovery menu
OK, got it - Wiped data/factory reset & cache partition ... now what? Thanks for the help!
qwertysmerty said:
Sorry, stupid me. Press Volume UP & Power simultaneously, then release Volume UP button to get into recovery menu
Click to expand...
Click to collapse
---------- Post added at 02:06 AM ---------- Previous post was at 01:56 AM ----------
I got it, I believe - at least, I am back to a "Welcome" screen on my phone. Thank you SO MUCH for the help!
heatheranne said:
OK, got it - Wiped data/factory reset & cache partition ... now what? Thanks for the help!
Click to expand...
Click to collapse
I have Wiped data/factory reset & cache partition but still no Command. kindly help
akinpeluvictor said:
I have Wiped data/factory reset & cache partition but still no Command. kindly help
Click to expand...
Click to collapse
What are u trying to do before getting the message?
akinpeluvictor said:
I have Wiped data/factory reset & cache partition but still no Command. kindly help
Click to expand...
Click to collapse
I try to update mu phone to Android 8.0 after that my phone download automatically next security patch.i tap to reboot to install.
But my phone stuck on "no command"
I try to wipe cache and data.but still no command and phone not booting
Only showa Android logo
Please help me
sajjadaf said:
I try to update mu phone to Android 8.0 after that my phone download automatically next security patch.i tap to reboot to install.
But my phone stuck on "no command"
I try to wipe cache and data.but still no command and phone not booting
Only showa Android logo
Please help me
Click to expand...
Click to collapse
Step 1. Plug in a usb charger to the phone, then quickly press vol+ and power button to get into the "No command screen"
Step 2. Again, press the vol+ and power button AND press the HOME button, then you will see the Recovery menu .
See the solution here :good:
Mayersdz said:
i cant do hard reset because i get no command and no recovry mode
any solutions ?
Click to expand...
Click to collapse
Hi based on this how did you sort out the issue. I have a Nokia 6 model TA-1024 it is stuck on the No command screen
---------- Post added at 12:34 PM ---------- Previous post was at 12:21 PM ----------
artigasperez said:
I have a nokia 6 1025 (ex-AmazonPrime) flashed via OST with june firmware, and update via sd card recovery with ota updates until december. Then I flashed Oreo Beta in january.
All worked fine.
Now i want to update to Oreo final. The zip is in the SD card, but when i try to put in recovery mode there is only the "no command" message.
I tried to get into recovery with both methods, with volumeup+power keys, and with "adb reboot recovery". Always the same "no command" message
The suggested solution, pressing volumeup and power together does not work.
Click to expand...
Click to collapse
Hi similar situation here, how did you go about it
sltushar said:
Just press once volume up and power button together when you see the no command
You will get the recovery
Click to expand...
Click to collapse
I have a Samsung galaxy s5, phone keeps rebooting into recovery mode tried wiping cache partition, factory reset all failing to work. now want to install custom firmware but the reboot to bootloader function wont work it quickly flashes a no command screen then goes back to Android recovery screen. How can I get past this?
Flash it thru Odin, whichever is supported right now, then unlock the bootloader for custom roms. If you dont know the process of unlocking bootloader then ask me when you finish installing official firmware via odin
sltushar said:
Flash it thru Odin, whichever is supported right now, then unlock the bootloader for custom roms. If you dont know the process of unlocking bootloader then ask me when you finish installing official firmware via odin
Click to expand...
Click to collapse
Thanks but it wont go into download mode it keeps going back to recovery mode any time I try to go to download mode unless there is another way it am not aware of to flash without going into download mode