Database Users

[Q] Nexus 10 stuck in bootloop after Lollipop flash no ADB and no Fastboot

So .... I flashed the mantaray-lrx21p image from Nexus Factory Images on my Nexus 10 (16GB Wifi) and now it's stuck in a bootloop.
No problem, I thought, I can get into recovery and fix it, right? Maybe do a wipe and try again? Yeah, not so fast. I get the bootloader screen, but the only option is 'Start' which just boots into the system that bootloops.
That's OK, I'll just use fastboot to wipe it. Nope. Fastboot doesn't detect a device.
I've tried both ADB and fastboot on Mac & Linux. Same issue (neither fastboot nor adb detect a device).
Ideas?
Observations
In case you think I'm just being impatient, it has been doing the boot animation for about 25 minutes now.
It doesn't like to stay off. If I hold the power button for 10 seconds it turns off, but it turns itself back on in about 5 seconds.
If I power it on while holding the volume button closer to the power button, I can get into a half-assed bootloader ... meaning that I can only push the power button again to 'Start'. I cannot cycle through the options with the volume buttons.
During the mentioned (half-assed) bootloader screen, fastboot does not detect a device.
During the boot animation, adb does not detect a device.

copolii said:
So .... I flashed the mantaray-lrx21p image from Nexus Factory Images on my Nexus 10 (16GB Wifi) and now it's stuck in a bootloop.
No problem, I thought, I can get into recovery and fix it, right? Maybe do a wipe and try again? Yeah, not so fast. I get the bootloader screen, but the only option is 'Start' which just boots into the system that bootloops.
That's OK, I'll just use fastboot to wipe it. Nope. Fastboot doesn't detect a device.
I've tried both ADB and fastboot on Mac & Linux. Same issue (neither fastboot nor adb detect a device).
Ideas?
Observations
In case you think I'm just being impatient, it has been doing the boot animation for about 25 minutes now.
It doesn't like to stay off. If I hold the power button for 10 seconds it turns off, but it turns itself back on in about 5 seconds.
If I power it on while holding the volume button closer to the power button, I can get into a half-assed bootloader ... meaning that I can only push the power button again to 'Start'. I cannot cycle through the options with the volume buttons.
During the mentioned (half-assed) bootloader screen, fastboot does not detect a device.
During the boot animation, adb does not detect a device.
Click to expand...
Click to collapse
The reason starts the only option is because your only holding volume up when going into fastboot. Hold power and volume up AND DOWN. All at the same time. Trust me I had the same issue but googling helped me find out you gotta hold both buttons
Sent from my VS980 4G

Same problem here, I'm stuck in a bootloop
I can access the bootloader and retry, but I'm still stuck in a bootloop.
I have checked the hash of the zip so I don't know what the problem can be.
Maibe I don't have the very last version of the sdk, that's the only guess I can do, let's try this...
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
supermamie said:
Same problem here, I'm stuck in a bootloop
I can access the bootloader and retry, but I'm still stuck in a bootloop.
I have checked the hash of the zip so I don't know what the problem can be.
Maibe I don't have the very last version of the sdk, that's the only guess I can do, let's try this...
Click to expand...
Click to collapse
I launched a 3rd flash while I downloaded the sdk and this one worked...
Absolutely no idea why.

I finally got it to boot.
boot into bootloader (hold vol-up+vol-down+power)
choose reboot bootloader
choose shutdown
turn it back on
Seems like it needed to be shut completely off not just rebooted after the flash. Perhaps a reboot maintains weird memory fragments or something? Crazy talk, I know.
Edit: you shouldn't have to wait long to see if it works. Mine jumped to the "Upgrading apps ..." screen straight away.

The very first boot on my n7 and n10 took about 20 min, after that they have normal boot time, I believe this may have something to do with encryption but never bothered to check as I just did something else while it booted
Side note, the n9 has an initial boot time of at least 5-10 min (can't recall but it took forever it felt like) and this is optimized hardware for the software so no surprise that there is a huge long boot time on the first go
Also I flashed both manually erasing all partitions first through fastboot then flashing each one individually... Just another side note

supermamie said:
Same problem here, I'm stuck in a bootloop
I can access the bootloader and retry, but I'm still stuck in a bootloop.
I have checked the hash of the zip so I don't know what the problem can be.
Maibe I don't have the very last version of the sdk, that's the only guess I can do, let's try this...
---------- Post added at 10:07 PM ---------- Previous post was at 10:05 PM ----------
I launched a 3rd flash while I downloaded the sdk and this one worked...
Absolutely no idea why.
Click to expand...
Click to collapse
Ive tried to connect to the device in adb, fastboot, I can only get it to adb sideload mode.
Sideloading gives the message Wrong footer instalation aborted.
How did you manage to flash the image? All drivers did install properly it seems.

Boot loop
thedarksavant said:
I finally got it to boot.
The same was happening to me, after unlocking it it began to loop, even after I wipe it was still looping.
I followed your steps of going into reboot recovery then power off. -- issue resolved!!
Thanks!
******
Click to expand...
Click to collapse

Zuk Z1 Soft Brick

Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.

triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?

Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!

hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.

rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?

crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx

Can y get to fastboot ?

im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/

CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!

Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now

Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help

Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.

Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme

Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail

errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.

Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all

Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)

rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.

keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....

how to stop boot loop ??????
can you provide videos how to stop boot loop ??????

Flashed wrong image. ZUK Z1 is bricked.

Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?

Take it to service center they dont even know what happan and repair or replace your phone as my expiriance same done on my old infocus m2

Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk

Use QPST and flash ZUI with that. I unbricked mine with that.

Kounjula Rahul said:
Keep pressing volume up + volume down and power button so u can enter twrp...
Or
Switch it off completely and press volume up and connect it to pc to enter fastboor and flash stock rom using fastboot...
I think u can revive ur phone back as its booting means the bootloader is still present...try entering fastboot
Sent from my ZUK Z1 using Tapatalk
Click to expand...
Click to collapse
All kinds of physical inputs and button combinations fail.
YoolaCro said:
Use QPST and flash ZUI with that. I unbricked mine with that.
Click to expand...
Click to collapse
QPST does not recognise the phone. Drivers installed and all set up al right, sadly.

Do as i say

i also did same mistake
tried to install twrp with flashify ...my phone too keeps on restarting every second..please help me guys..
if you got any solution to this means please help me

Did you solve the problem? Mine is having the same problem!

Please Help Me.....!!
SarthakSL said:
Did you solve the problem? Mine is having the same problem!
Click to expand...
Click to collapse
Did anyone find solution of it?
Because I accidently flashed one plus 1 twrp in zuk z1. Now device only shows zuk logo and after that complete black out. I also tried the solution of hardbricked( Volume up button) phone but can't fix this problem. I am not able to go to fastboot mode. Is my device is hardbricked or softbricked? Any one suggestion will be very helpful to me and thanks in advance.
---------- Post added at 06:48 PM ---------- Previous post was at 06:18 PM ----------
Giop114 said:
Hello everybody.
Clumsy idiot I am, I flashed the wrong .img through Flashify and now my phone is bricked. Here's all I know:
All I see is a boot loop, phone turns on (with bootleg and vibration) for a second, then off, on again and so on.
- TWRP installed, but not reachable.
- ADB not working.
- QFIL not recognising the phone (drivers installed).
- I have no logs to post.
- No way to operate Volume/Power combinations because the time the phone reboots is less than a second.
What can I do to save it?
Click to expand...
Click to collapse
You found solution?
if found please please give me

It seems there is a solution. Keep pressing the Vol+ Vol- and the Power Button until the phone switches off. The phone will reboot. This time when you press Power Button, it will not restart. Hope I helped you.

Refer this
https://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833

Stuck in fastboot mode

I dont know what happened but I rebooted my phone today and it booted into fastboot.. I cannot in any way get it to boot normally. The buttons are not being held down and I have tried to pull the battery.. I dont get it, anyone else have this issue and fixed it have an idea??

Was it stock (including recovery) or modified?
I would try to fastboot the TWRP over and then boot into that (Power & Vol+). But then... I seldom run stock.

SoNic67 said:
Was it stock (including recovery) or modified?
I would try to fastboot the TWRP over and then boot into that (Power & Vol+). But then... I seldom run stock.
Click to expand...
Click to collapse
No, it wasn't stock and I dont know what happened.. I was running the latest CM13 and rebooted this morning and it freezes up with the ASUS logo and saying "Fastboot Mode!!!" at the top... I've tried flashing twrp via fastboot but not getting anything.. I need a copy of the stock firmware with the boot system and recovery image in it but I'm having a hard time finding it.

BiasedThunder said:
I dont know what happened but I rebooted my phone today and it booted into fastboot.. I cannot in any way get it to boot normally. The buttons are not being held down and I have tried to pull the battery.. I dont get it, anyone else have this issue and fixed it have an idea??
Click to expand...
Click to collapse
I too had this issue. Tried lot of key combinations. Didn't work. My solution was to connect to PC and run
fastboot continue
Then it booted normally. Everything stock.
Hope this helps.

BiasedThunder said:
I dont know what happened but I rebooted my phone today and it booted into fastboot.. I cannot in any way get it to boot normally. The buttons are not being held down and I have tried to pull the battery.. I dont get it, anyone else have this issue and fixed it have an idea??
Click to expand...
Click to collapse
Phones boots into fastboot mode in two situations
1. Pressing vol up and power button simultaneously for rebooting
2. Your phone doesn't have recovery AND any OS installed
I guess your vol up button is constantly in pressed state.
Second situation cannot occur unless you wipe your system and recovery manually. So you are in the first situation
Your phone's vol up button is constantly in pressed state or electrically shorted may be due to water entering the case
Solution: You will have to open your phone's case and clean the area near the volume button. I guess you had opened the case/body and didn't fit it properly.

sziraqui said:
Phones boots into fastboot mode in two situations
1. Pressing vol up and power button simultaneously for rebooting
2. Your phone doesn't have recovery AND any OS installed
I guess your vol up button is constantly in pressed state.
Second situation cannot occur unless you wipe your system and recovery manually. So you are in the first situation
Your phone's vol up button is constantly in pressed state or electrically shorted may be due to water entering the case
Solution: You will have to open your phone's case and clean the area near the volume button. I guess you had opened the case/body and didn't fit it properly.
Click to expand...
Click to collapse
something happened when it rebooted and it lost recovery.. I fastboot flashed the new TWRP and reflashed the rom and all seems fine now.
Thanks for the quick responses!!

even I've witnessed a similar problem.. please help me.....out
BiasedThunder said:
No, it wasn't stock and I dont know what happened.. I was running the latest CM13 and rebooted this morning and it freezes up with the ASUS logo and saying "Fastboot Mode!!!" at the top... I've tried flashing twrp via fastboot but not getting anything.. I need a copy of the stock firmware with the boot system and recovery image in it but I'm having a hard time finding it.
Click to expand...
Click to collapse
Can any one please suggest where to find the stock firmware with the boot system....Please help me out here

Hello the second situation is happening to me. What can i do? In desperate

Help Me
Hello,
I have a similar problem. My phone is turned off and on the fastboot mode screen. Normal keys with volume keys, recovery mode, open, restart, even if I try to reboot on this screen opens. I tried to connect and format the computer, but I do not install all the drivers and files, but computers do not see my phone. Can you find me a solution?

grafikermc said:
Hello,
I have a similar problem. My phone is turned off and on the fastboot mode screen. Normal keys with volume keys, recovery mode, open, restart, even if I try to reboot on this screen opens. I tried to connect and format the computer, but I do not install all the drivers and files, but computers do not see my phone. Can you find me a solution?
Click to expand...
Click to collapse
Reinstall twrp from fastboot & install rom

Requesting Assistance with Bricked P8 Lite

Hello, I m battling this problem already 2 days, I have P8 Lite mobile phone.
Phone Originally came with ALE-L21 C432B132 but at that time I got update ALE-L21 C432B188 what made my phone 5.0.1 Android
So a few days ago I received Update ALE-L21 C432B587 in updater but what happened is the update stuck on 1 % then showed Error message
That I cant Install that and Phone Rebooted. And it stuck on the First LOGO and now the fun part starts.
I read Every single post, guide what was on google all Suggested to use fastboot and just Flash back to my Original ALE .
Ok, so I did all the Phone Unlocking by getting unlock code and then using fastboot to unlock the phone now my phone is unlocked and it shows that when I'm in fastboot.
I also put UPDATE.app in SDcard just in case but thing is I cant Access that Update menu Or Recovery menu With Button UP + Power Only thing what Works is Fastboot
So I Extracted the boot, System, Recovery, cust, placed in adb folder and run the Cmd if I write fastboot devices it shows my phone so all is ok . and when I do all the flash commands nothings are failing and all shows that is completed. but still I can't start my phone and the only volume down + power works other combinations have no reaction + It just stands on that logo it doesn't even reboot how others have it
I let it send there for 1 h and it was just That first Logo.
So I'm writing here maybe someone has some Suggestion how to Resurrect my phone I'm open now to any suggestions.

Flash TWRP recovery
Then flash any ROM you want by TWRP
You can get the ROMs via "firmware finder" application, it's in play store..

Thank you for your Answer . I Tried to Install TWRP Recovery but without a luck Phone just stays on LOGO and Only button Combination Works is Volume Down + Power what Goes in Fast boot. Maybe i dont know how to enter TWRP mode however non of Huawei button presses worked. Maybe there is other way to get in that Recovery mode .. Also when i turn on phone and im in that LOGO my phone is not recognized by my PC , ONLY if i enter Fastboot i can See my Phone in Device manager and in CMD writing fastboot Devices. if i write adb devices it shows nothing .
also i have question does it mattare how i write : fastboot flash boot boot.img because if i write fastboot flash BOOT boot.img i cant flash it only if all letters are small it goes in .

Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.

Positivity_ said:
Ok, so Today I took off the back plastic and disconnected the battery just in case that would help. And no phone still is stuck in the First logo
But there is new thing Happening If I Go from Fastboot to Recovery mode pressing Vol UP + Power wile wire is connected.
So now it shows some sort of Error
Where its mention Func NO: 7 (teeos image) however I straight away tried to flash it and I cant do it it's not Allowed.
Click to expand...
Click to collapse
run twrp press vol plus and power and diconnect your phone from pc.

Adi5 said:
run twrp press vol plus and power and diconnect your phone from pc.
Click to expand...
Click to collapse
I just flashed TWRP3.0.2.img and Did what you told i got same Error what you can see in image. is that wrong twrp version?

try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, if recovery2 is not corrupted it should work. Good Luck

redknight65 said:
try to put the UPDATE.APP in the dload folder on SDcard and with phone off, press VOLUME UP + VOLUME DOWN + POWER, it should work
Click to expand...
Click to collapse
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.

Positivity_ said:
I have that in there I have one what is Update.zip and one what is UPDATE.app . all that is happening now is if do that button combination and wait few Seconds phone just Vibrates once and
nothing happens on Screen.
I also tried twrp 2.8.7 just know and Again the same problem what in the Image I uploaded.
Click to expand...
Click to collapse
how long did you wait after the vibration?
---------- Post added at 21:30 ---------- Previous post was at 21:29 ----------
also try to flash recovery2

redknight65 said:
how long did you wait after the vibration?
Click to expand...
Click to collapse
at last 2 min or even more buttons are pressed nothing happens
Yes i flashed Recovery2 too with the ROM i flashed now still the same
I did Steps like in tutorials
Starting with lowest Version then flashing up Still nothing.

Positivity_ said:
at last 2 min or even more buttons are pressed nothing happens
Click to expand...
Click to collapse
try to flash recovery2 and do that again

redknight65 said:
try to flash recovery2 and do that again
Click to expand...
Click to collapse
I just did it again .. nop it still just vibrates and nothing is happening.

Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
then I can't help you, sorry

Positivity_ said:
I just did it again .. nop it still just vibrates and nothing is happening.
Click to expand...
Click to collapse
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.

RootingPro-18 said:
Download surdu_petru TWRP it is only one for Ale-L21 version 3.1.1.0 flash it by fastboot and then try! I had same problem and this solved it.
Click to expand...
Click to collapse
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same

Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
Click to expand...
Click to collapse
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Positivity_ said:
Thanks for Answer
I just Tried it i used this https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
And i still got same Error message what is in image
I Boots in that Image without Any Button press.
And if i Press VolUP + Power its the same
Click to expand...
Click to collapse
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery

RootingPro-18 said:
Yeah, system is corrupted, you need B612 firmware if you have dual sim or b611 if you have single sim. Flash Cust boot system, not recovery! This should fix it
---------- Post added at 10:18 PM ---------- Previous post was at 10:16 PM ----------
Try to shut down your phone and then try. On Fastboot just press volume down and wait till it boot's in e recovery
Click to expand...
Click to collapse
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.

Positivity_ said:
Ok thanks i will trie B612 I have Dual sim. and about if press volDown then it goes in Fastboot Mode, I never seen any e Recovery only recovery i know is with VolUp + power but that part is not working for me i still get that error .
UPDATE:
Just Flashed B611 as that was for Dual Sim and no luck it shows the same thing. and Recovery mode is not working and Duble Button press Still just produces Vibration after time.
Click to expand...
Click to collapse
Noooo, B611 is for single sim. B612 is for Dual.

RootingPro-18 said:
Noooo, B611 is for single sim. B612 is for Dual.
Click to expand...
Click to collapse
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?

Positivity_ said:
Now im Confused .
All pages i found says B611 is for Dual Sim and B612 is single Sim card here is screen
https://i.imgur.com/gc5mvS2.png
If this is not right can you provide me with download link with right version what worked for you ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/general/security-update-ale-l21c432b611-single-t3688441 from here you can get lastest vesions