Hi people, i think the title is self explanatory. I downgraded from nougat to marshmallow and now vibration is not working, instead it makes a low beep.
Can anyone relate how to fix this please?
i googled but didn't find any solution apart from factory reset. I can confirm this is not a hardware prob because phone vibrates in twrp.
Thanks in advance.
You have to flash mm bootloader & modem in odin, then it works again.
also i downgrade my s7 edge and i lose vibration. i try to re-odyn everything from 6.0.1 but nothing! anyone can help?
Here's the solution!
Temporarily upgrade to Android 7 to fix the vibration issue then use odin to flash final version of android 6.0.1. You must flash all 4 files contained in the extracted (unzipped) firmware package but ignore the home_CSC file. IMPORTANT...tick the option in odin "phone bootloader update". This process will wipe all data on the phone full but will give you a fully functioning galaxy s7 with Android 6.0.1 marshmallow!:good:
But without home_csc you have no csc.... is there straight guide for this process? I also downgraded to 6.01 but have no vibration at all.
I'm in the same situation, after downgrading from Nougat to Marshmallow, I lose fingerprint functionality. If I upgrade back to any Nougat firmware then fingerprint starts working again. When I go to *#2663#, I get the Fingerprint Initializing Fail error. I'm going to try the Phone Bootloader Update method to downgrade.
---------- Post added at 06:31 PM ---------- Previous post was at 06:25 PM ----------
That didn't work, still getting the same error message with Fingerprint not working "An error has occurred with the Fingerprint Sensor".
Related
Hi,
I have played around with dload update from B188 to B524.
The Phone didn't start,it got bootloop. So I flashed the B190 AND B170 boot/cust/recovery/system per fastboot.
Allworks fine,my missing functions I had in the past are there again, but I have one big Problem.
I can't activate the checkboxes in SIMCard Management. It looks that there is no sim in the phone, but it is!
Any Ideas whats wrong here? Without SIMI don't needthat phone ;-P
@edit:Seems I have a serbia Image on my phone, so I think this is the Problem.I'll drink coffee and try a other image.
@edit: I have flashed back twrp in my recovery partition, and write back my working backup. All is fine, but the SIM Card Problem is already there? Why? I have done a full backup with twrp and I know this is without errors because I have used it the last days more thant hree times and it worked for me.
But now, no SIM Support! Any Help would be apreshiated cause I have no working Handy now.
Kind Regards,
Marcel
here is the solution, you lost your imei , juste follow this tutorial and you will get it back: http://tundevs.blogspot.com/p/huawei-p8-marshmallow.html
I used this from XDA preferred: http://forum.xda-developers.com/p8lite/general/huawei-p8-lite-android-6-0-marshmallow-t3309796
...and myphone is up an running beter than before ;-P
Snitch
snitchedable said:
Hi,
I have played around with dload update from B188 to B524.
The Phone didn't start,it got bootloop. So I flashed the B190 AND B170 boot/cust/recovery/system per fastboot.
Allworks fine,my missing functions I had in the past are there again, but I have one big Problem.
I can't activate the checkboxes in SIMCard Management. It looks that there is no sim in the phone, but it is!
Any Ideas whats wrong here? Without SIMI don't needthat phone ;-P
@edit:Seems I have a serbia Image on my phone, so I think this is the Problem.I'll drink coffee and try a other image.
@edit: I have flashed back twrp in my recovery partition, and write back my working backup. All is fine, but the SIM Card Problem is already there? Why? I have done a full backup with twrp and I know this is without errors because I have used it the last days more thant hree times and it worked for me.
But now, no SIM Support! Any Help would be apreshiated cause I have no working Handy now.
Kind Regards,
Marcel
Click to expand...
Click to collapse
Install an older version via fastboot and then doing a Local Update a newer version. I had the problem whenever it flashes via fastboot. Example: Install the B170 via fastboot and then the B188 via Local Update. Believe me it works. After that you can then install the B524 without Sim Bug.
The only way that worked was fastboot flash of b052. Then emui update 2 time until b188.
I got no errors, but the final emui dload up to b524 ends in recovery with error and breaks. Fortunately my missing features, the reason why I had started updating, are already fixed. IMEI Problemis away, $G Icon in the top is back, Knockon Feature,and so on...
Do you have a mm tarp backup for me? Maybe?
snitchedable said:
The only way that worked was fastboot flash of b052. Then emui update 2 time until b188.
I got no errors, but the final emui Floyd up to b524 ends in recovery with error and breaks. Fortunately my missing features, the reason why I had started updating, are already fixed. IMEI Problemis away, $G Icon in the top is back, Knockon Feature,and so on...
Do you have a mm tarp backup for me? Maybe?
Click to expand...
Click to collapse
Do you mean a Marshmallow Update File?
---------- Post added at 08:33 PM ---------- Previous post was at 08:27 PM ----------
All Files you needed:
https://mega.nz/#!fMVByRhQ!7mlWUFaQ3_ldLblDQJGpQLdRYp7KgQeO0mMhofNcLbM B170 Firmware via Fastboot
https://mega.nz/#!jNEUkKDC!LXQegnIClkxMKjUkCG3c2WT1aoUR2gRb7Rn_zhoxW10 B188 Firmware via Local Update
https://mega.nz/#!OBVU3RyT!gSDNFMVtWVqA1HyneCuofhFmVVJ6lUDonzfKzjucbFs B524 Firmware via Local Update
:good::good:
yes
Hi there
I updated today from 5.1.1 to 6.0.1 through the settings, and it got stuck in boot loop.
I managed to get a custom ROM on but now I cannot make calls or sms messages. I can still use my wifi though.
I'm in Australia, model N910C .
I cannot seem to find any factory firmwares, my googlefu appears to be lacking this time.
Can someone please point me in the right direction of a fix?
My computer is being a stooge and won't connect me with ODIN, but I've come across FlashFire and might be able to use one of the computers at work.
Thanks
I managed to use a rubbish work computer to connect to Odin and flash stock 5.1.1, root and recovery. Back to square one
Sent from my SM-N910C using Tapatalk
try factory reset from recovery
---------- Post added 4th June 2017 at 12:10 AM ---------- Previous post was 3rd June 2017 at 11:59 PM ----------
this may work
http://firmware.smartphonewp.com/download-samsung-galaxy-note-4-sm-n910c-full-firmware-4-files/
flash 4 files with odin
u can find also mm version
Hi guys having a total nightmare trying to update my mate 8, i have the bootloader unlocked and TWRP installed, this is after one week of reading threads and watching video tutorials, i am stuck on EMUI 4 and the build number is NXT -L29C636B103 I would like to update it to Nougat. I have downloaded update. zip and update full hw eu zip and placed them in the dload folder i created but when i try to flash these, i get Error 7, i also tried wiping, system/cache/data in TWRP but the same thing happened Error 7. I am really besides myself now and so fed up any help would be greatly appreciated. My phone was bought from china and i believe the Europe rom is installed.
No L29C636B103 rom is Asian rom....
---------- Post added at 10:09 PM ---------- Previous post was at 10:07 PM ----------
L29C432B*** is European rom... Letest European rom is L29C432B581 on firmware finder app....
Hi thank you for replying, i tried firmware finder but i seem to have an additional tab to fill in as the connect button stays greyed out with only putting in localhost and 8080, any ideas on what i need to enter.
Tried using firmare finder but the system updater still does not see the updates which have downloaded, there are 2 files in one folder and one file in another, does anyone know how to move forward with this, thank you.
Update tried flashing update.zip and update1.zip but still get Error 7, do you think this is because my installed rom is Asian region.
canford said:
Tried using firmare finder but the system updater still does not see the updates which have downloaded, there are 2 files in one folder and one file in another, does anyone know how to move forward with this, thank you.
Click to expand...
Click to collapse
First get the firmware approved through FF for "Get the firmware through DNS".....
Then you dont have anything to do with Proxy. Just open IP Settings, check on "Static" and put DNS 1 and DNS 2 as 81.177.139.39......click save.
Open Updater and look for update. You will get it for sure if the firmware is already approved for flashing .
Start downloading. Midway, you may pause, change your WIFI again to normal and start again else you may see "Server not available now" notice at the end when ready to flash after 100% download.
Done.
Will give this a try, thank you so much.
It gets as far as rebooting into TWRP after downloading updates but goes no further, should i manually install the updates one at a time within TWRP, thanks.
No twrp.... You need to be on stock recovery... Flash that first...
---------- Post added at 02:55 PM ---------- Previous post was at 02:54 PM ----------
You got rest all right now...
Thought i was just about with joy until it booted back into stock recovery, the update started but failed saying the update failed because it could not verify the update, i checked the compatability with Imei and said was ok, do you think it maybe due to going from B103 straight upto B589, i am at a total loss at what to try next, thanks.
May be...I flashed on top of B330...try with any higher versions of emui 4 or 4.1....oh ...wait....
You need to flash B562 first...
Managed to update to B330 on EMUI 4.1, have tried B585 and B589 but failed both of them, I noticed there is no B562 in the firmware finder list, there is also 2 versions of each update do you download both or just the FullOTA update thanks.
Cannot thank Apat26 enough for all your help, even though B562 was not showing in the firmware finder list, I had a quick look in the system updater and B563 was there so updated that version and then went on to update to the latest B589, om EMUI 5.0.1, so well happy with the overall result.
My device is on 337 firmware, with bootloader unlocked and magisk flashed.
However I still received an ota update. Is this possible? Is it safe to download and install this and future ota updates normally even with the bootloader unlocked and rooted?
Check screenshots below.
StoneSpider said:
My device is on 337 firmware, with bootloader unlocked and magisk flashed.
However I still received an ota update. Is this possible? Is it safe to download and install this and future ota updates normally even with the bootloader unlocked and rooted?
Check screenshots below.
Click to expand...
Click to collapse
I also got this update but sad part is it gets downloaded but when the installation part comes it get stuck at twrp logo.then reboots & again after entering the home it again tries to download fota update whenever wifi is available.this happens in loop
---------- Post added at 07:30 PM ---------- Previous post was at 07:18 PM ----------
tried installing Pixel experience in my asus zenfone max pro m1 .all was good except 1 thing that Vodafone LTE service of india is either not working in it and only wcdma or 3g is working.But there is no issue with reliance jio LTE data connection.Second issue is the audio profile automatically changes to vibration mode from ringtone mode.now whenever it happens and an incoming call comes i am not able to know that the phone is ringing.i tried many times to reset it but the Audio profile automatically goes into vibration mode
so I am a mom of 3 including an infant and exhausted trying to figure this out. Trying not to clog the board opening a new thread. Long story short- I want to use an app that the developer has not been able to fix the errors with it when using Nougat on an S7. They suggested I upgrade to Oreo or Pie to fix this. I have an unlocked phone purchased outright on eBay and use Total Wireless. So there will be no one to assist me in this. I'm fairly tech savvy so I looked on YouTube about rooting and upgrading with a custom ROM.
I watched these videos:
sorry new cannot post
So easily I enabled developer options and OEM unlock and USB debugging. Downloaded Odin and Magisk and no verity and Gapps and lineage 16.0 (from Ivan Meler) and twrp with the twrp-3.3.1-0-heroqltechn.img.tar file which I determined is which one I needed.
Odin will not flash TWRP (one of the first steps). Fails every time. It does start blue and I did download and install the latest Samsung drivers package just to be sure.
Then I found it was probably because I had a locked bootloader. So, I used this tut and that did successfully download to my phone via Odin. But TWRP still will not "flash" to the phone.
Now, my fingerprint sensor says "The fingerprint sensor is not responding, please try again later". and my phone has a security notice stating "unauthorized actions have been detected. Restart your phone and undo any unauthorized changes". So I am thinking that I did successfully unlock the bootloader? But TWRP still will not flash.
I considered using oneclickroot.com but it's $40, phone only worth about $100, and my husband is convinced they're going to steal info from my computer and phone in the process (even thought they're XDA endorsed). They also told me they can only give me Oreo not Pie.
I have downloaded and used SuperBackup. Also all my photos are auto backed up to Google and my contacts and calendar are too. So I don't think it's a huge deal if I lose everything. Even if I brick it I can get another. Reinstalling and relogging into all my apps will be a pain but whatever. I have a password app that can be logged into from the web.
Also my camera has been getting buggy and not opening and having to be restarted and in general the phone is just getting glitchy, so I was hoping an upgrade might help.
All the info I have:
Model G930V Ver 7.0
Baseband G930VVRS4BQC9
Build NRD0M.G930VVRS4BQC9
Knox 2.7.1
When I enter developer mode:
Odin Mode (High Speed)
Product name: SM-G930V
Current Binary: Samsung Official
System Status: Custom
FAP lock: Off
Qualcomm secureboot: enable
AP SWREV B4(2, 1, 1, 1, 1) K1 S3
Secure Download: enable
My startup screen where it says Galaxy S7 powered by Android also now has an unlocked lock icon and says "custom" underneath.
Should I just figure out how to "undo" what I did and leave it alone? I'd really like to use the eMeals app and I'd really like to not buy a new phone.
You can't flash twrp on a US branded snapdragon s7... only on exynos versions of the phones...however...there are ways to obtain root and there are ways of using twrp temporarily while running programs on your computer...it is very perplexed and I can't easily explain it but just read through the threads and google root and twrp xda snapdragon s7 and read up on it...or better yet look into the roms thread...jrkruse has some roms with temporary twrp and easy root...u will never have true custom roms or magisk on that phone but has got some awesome stock base roms and ways of doing things where you wont really miss custom roms
---------- Post added at 12:06 AM ---------- Previous post was at 12:03 AM ----------
To get back to normal use Odin and flash the ap, bl, cp, and Csc files via the instructions...u have to read up on it...google Odin s7 back to stock