After fastbootupdates/repaires no SIM cards available - P8lite Q&A, Help & Troubleshooting

Hi,
I have played around with dload update from B188 to B524.
The Phone didn't start,it got bootloop. So I flashed the B190 AND B170 boot/cust/recovery/system per fastboot.
Allworks fine,my missing functions I had in the past are there again, but I have one big Problem.
I can't activate the checkboxes in SIMCard Management. It looks that there is no sim in the phone, but it is!
Any Ideas whats wrong here? Without SIMI don't needthat phone ;-P
@edit:Seems I have a serbia Image on my phone, so I think this is the Problem.I'll drink coffee and try a other image.
@edit: I have flashed back twrp in my recovery partition, and write back my working backup. All is fine, but the SIM Card Problem is already there? Why? I have done a full backup with twrp and I know this is without errors because I have used it the last days more thant hree times and it worked for me.
But now, no SIM Support! Any Help would be apreshiated cause I have no working Handy now.
Kind Regards,
Marcel

here is the solution, you lost your imei , juste follow this tutorial and you will get it back: http://tundevs.blogspot.com/p/huawei-p8-marshmallow.html

I used this from XDA preferred: http://forum.xda-developers.com/p8lite/general/huawei-p8-lite-android-6-0-marshmallow-t3309796
...and myphone is up an running beter than before ;-P
Snitch

snitchedable said:
Hi,
I have played around with dload update from B188 to B524.
The Phone didn't start,it got bootloop. So I flashed the B190 AND B170 boot/cust/recovery/system per fastboot.
Allworks fine,my missing functions I had in the past are there again, but I have one big Problem.
I can't activate the checkboxes in SIMCard Management. It looks that there is no sim in the phone, but it is!
Any Ideas whats wrong here? Without SIMI don't needthat phone ;-P
@edit:Seems I have a serbia Image on my phone, so I think this is the Problem.I'll drink coffee and try a other image.
@edit: I have flashed back twrp in my recovery partition, and write back my working backup. All is fine, but the SIM Card Problem is already there? Why? I have done a full backup with twrp and I know this is without errors because I have used it the last days more thant hree times and it worked for me.
But now, no SIM Support! Any Help would be apreshiated cause I have no working Handy now.
Kind Regards,
Marcel
Click to expand...
Click to collapse
Install an older version via fastboot and then doing a Local Update a newer version. I had the problem whenever it flashes via fastboot. Example: Install the B170 via fastboot and then the B188 via Local Update. Believe me it works. After that you can then install the B524 without Sim Bug.

The only way that worked was fastboot flash of b052. Then emui update 2 time until b188.
I got no errors, but the final emui dload up to b524 ends in recovery with error and breaks. Fortunately my missing features, the reason why I had started updating, are already fixed. IMEI Problemis away, $G Icon in the top is back, Knockon Feature,and so on...
Do you have a mm tarp backup for me? Maybe?

snitchedable said:
The only way that worked was fastboot flash of b052. Then emui update 2 time until b188.
I got no errors, but the final emui Floyd up to b524 ends in recovery with error and breaks. Fortunately my missing features, the reason why I had started updating, are already fixed. IMEI Problemis away, $G Icon in the top is back, Knockon Feature,and so on...
Do you have a mm tarp backup for me? Maybe?
Click to expand...
Click to collapse
Do you mean a Marshmallow Update File?
---------- Post added at 08:33 PM ---------- Previous post was at 08:27 PM ----------
All Files you needed:
https://mega.nz/#!fMVByRhQ!7mlWUFaQ3_ldLblDQJGpQLdRYp7KgQeO0mMhofNcLbM B170 Firmware via Fastboot
https://mega.nz/#!jNEUkKDC!LXQegnIClkxMKjUkCG3c2WT1aoUR2gRb7Rn_zhoxW10 B188 Firmware via Local Update
https://mega.nz/#!OBVU3RyT!gSDNFMVtWVqA1HyneCuofhFmVVJ6lUDonzfKzjucbFs B524 Firmware via Local Update
:good::good:

yes

Related

[Q] How can I reset this phone?

Here my problem:
-When i was able to use B052 then flashing B190 then update to Emui 4 and everything work as well.
-Now i cannot do any kind of update.
-I try to flash B052 via fastboot, the device is boot but i got strange launcher, some settings are missed or empty, to not talk about Balong bug.
My device is come with single sim firmware, how can i install the first shipped version?
I'm really unhappy from this phone. I try every kind of solution but without succeed, any help will be thanked.
haky 86 said:
Here my problem:
-When i was able to use B052 then flashing B190 then update to Emui 4 and everything work as well.
-Now i cannot do any kind of update.
-I try to flash B052 via fastboot, the device is boot but i got strange launcher, some settings are missed or empty, to not talk about Balong bug.
My device is come with single sim firmware, how can i install the first shipped version?
I'm really unhappy from this phone. I try every kind of solution but without succeed, any help will be thanked.
Click to expand...
Click to collapse
Do you remember the build no. which device came with? By the way did you try updating your phone by "force update" (by pressing all three buttons while phone is off). You can also update it via hisuite.
Suleiman01 said:
Do you remember the build no. which device came with? By the way did you try updating your phone by "force update" (by pressing all three buttons while phone is off). You can also update it via hisuite.
Click to expand...
Click to collapse
that the problem, i don't remember, will try to switch to dual sim then convert to single sim and see if solve the problem or will get back to reparation service.
haky 86 said:
that the problem, i don't remember, will try to switch to dual sim then convert to single sim and see if solve the problem or will get back to reparation service.
Click to expand...
Click to collapse
I think due to balong bug you are having these problems(I had balong bug too when I converted to official firmware from sokkoban rom). You just need vendor file of your phone. I have it but it's for dual sim.
Suleiman01 said:
I think due to balong bug you are having these problems(I had balong bug too when I converted to official firmware from sokkoban rom). You just need vendor file of your phone. I have it but it's for dual sim.
Click to expand...
Click to collapse
Thanks, it's look like solved by reflash B049, everything is working as should be, I don't think to touch again... for backing up for testing cm builds..
haky 86 said:
Thanks, it's look like solved by reflash B049, everything is working as should be, I don't think to touch again... for backing up for testing cm builds..
Click to expand...
Click to collapse
Maybe you should take a break for a while. Might refresh you up

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.
nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.
kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.
Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

How to make my VNS-L21 C432 B503 EMUI 5.0.3 Single-Sim to a Dual-SIM?

Hello everyone,
i would need help - if its possible anyway - to get the Dual-Sim working on my SS P9 lite.
Until now i was able to unlock BL, install TWRP Elite and SuperSU 2.82.
What do i have to do next?
Thank you in advance...
(PS: flashed some oeminfo - did not work, so i flashed back my original bached up oeminfo -
strange thing is that *#*#2846... is not working anymore - i recognized that because i wanted to
reinstall from HWOTA mode...? Should i orry about that?)
crouso said:
Hello everyone,
i would need help - if its possible anyway - to get the Dual-Sim working on my SS P9 lite.
Until now i was able to unlock BL, install TWRP Elite and SuperSU 2.82.
What do i have to do next?
Thank you in advance...
(PS: flashed some oeminfo - did not work, so i flashed back my original bached up oeminfo -
strange thing is that *#*#2846... is not working anymore - i recognized that because i wanted to
reinstall from HWOTA mode...? Should i orry about that?)
Click to expand...
Click to collapse
Hello,
had you already took a look at @k1ll3r8e's thread ?
He made a toolkit that can do what you need.
Best regards
Edit:
Dude you can do that also without the toolkit.
You only need the right oeminfo dual sim
and the correct rom.
Feel free to ask...
hello dadditz,
thank you for your reply! Of course i read a lot here and other sites, and also found the P9 toolkit! But my problem was/is, that i cant "upgrade" to VNS-L21C432B160 because i already was on VNS-L21C432B503 ... so i tried different things, but it did not work. Always the menue "Dual sim configuration" was not in the settings menue... and the image felt little bit "laggy"...
BUT
i was giving it another try - i downgraded from Nougat to MM with this ... tutorial and repeated the steps listed in the P9 lite toolkit... and now i have the Dual-Sim menue in the settings dialogue... and it is working
Because its not "enough" i wanted to return to Nougat - until now with no success... so am i now stuck on VNS-L21C432B160 ?
I tried some images from 380/370/336 but the huawei recovery always stops on 5% and denies the update - how can i upgrade again?
kind regards
crouso said:
hello dadditz,
thank you for your reply! Of course i read a lot here and other sites, and also found the P9 toolkit! But my problem was/is, that i cant "upgrade" to VNS-L21C432B160 because i already was on VNS-L21C432B503 ... so i tried different things, but it did not work. Always the menue "Dual sim configuration" was not in the settings menue... and the image felt little bit "laggy"...
BUT
i was giving it another try - i downgraded from Nougat to MM with this ... tutorial and repeated the steps listed in the P9 lite toolkit... and now i have the Dual-Sim menue in the settings dialogue... and it is working
Because its not "enough" i wanted to return to Nougat - until now with no success... so am i now stuck on VNS-L21C432B160 ?
I tried some images from 380/370/336 but the huawei recovery always stops on 5% and denies the update - how can i upgrade again?
kind regards
Click to expand...
Click to collapse
Hey,
I think you could save yourself from going back
at MM, but, the omelette is made now ...
Have you already done a factory reset + wipe cache in stock recovery ?
Tell me a little bit when you reboot the device
does any warning text come out ? if yes, what color ?
Dadditz said:
Hey,
I think you could save yourself from going back
at MM, but, the omelette is made now ...
Have you already done a factory reset + wipe cache in stock recovery ?
Tell me a little bit when you reboot the device
does any warning text come out ? if yes, what color ?
Click to expand...
Click to collapse
Well, when i was on Nougat, i was not able to see the "Dual Sim Settings" in the settings menue - i tried 20 times
i think... when i went "back" to MM the menue was immediately there...
I did the factory reset and wiped cache in stock recovery menue.
Booting up my device seems all fine - bootloader is relocked, no warnings or anything...
HiSuite told me that my device "has the latest developer version" and no upgrade would be available...
I tried to flash the firmware with TWRP - without success...; when i try dload the phone stuck on 5%... i also
tried the "-PV" versions - without any luck...
So i really have no idea left how to upgrade from this version?!
crouso said:
Well, when i was on Nougat, i was not able to see the "Dual Sim Settings" in the settings menue - i tried 20 times
i think... when i went "back" to MM the menue was immediately there...
I did the factory reset and wiped cache in stock recovery menue.
Booting up my device seems all fine - bootloader is relocked, no warnings or anything...
HiSuite told me that my device "has the latest developer version" and no upgrade would be available...
I tried to flash the firmware with TWRP - without success...; when i try dload the phone stuck on 5%... i also
tried the "-PV" versions - without any luck...
So i really have no idea left how to upgrade from this version?!
Click to expand...
Click to collapse
Use Firmware Finder to force the upgrade, download it from the store.
VPN method worked fine for me (i was on android 7).
Inside the app all the info, anymore
a thread is present here on XDA.
Give it a try...
You're on B160, go for B370 PV version, check compatibility otherwise choose for full ota one.
Good luck
Cheers

SIM Card not usable after flash

Hello Community! I hope I am right here, otherwise please just move this thread to where it belongs to, thanks!
I have a serious problem with my sgs 8 (950F). I flashed newest twrp, magisk, renovate-ice-g95x-r164 and no-verity-opt-encrypt-5.1. Everything worked fine and like a charme. I decided to update to a nightly version (worst decision ever) and before i was able to flash, twrp said: zip file corrupted. So I decided to go back to version 164 via the full backup i´ve made in twrp before. After the restore-process was finished, the device didn´t recognize the sim card anymore. So I tried to go back to stock firmware, which did not work since (after odin says pass) the firmware always stops at 32% and erases everything but the download mode on my phone. So I flashed twrp again, made a full wipe und data format and installed the renovate ice 164 again. After the boot, the sim card is detected and I also have to unlock it with the pin code. The problem is, that i can´t enter the network (Austria/Telering) and also I can´t search for any networks with my sim card, only emergency call is available. I am desperately looking for a solution to solve that problem and since I am no expert when it comes to details in flashing and the connections between hardware and software, i really could need help from experts. My guess is, that something is wrong with the modem. Can this be solved by flashing the mode new via odin? Stock firmware is not able to be flashed on my device, because of the error I mentioned above.
Thanks for you help and time!

No signal / IMEI after flashing Superman Rom

Hi Guys, hopefully someone will be kind enough to help me out here!
So I flashed my S7 Edge with Superman Rom a week or so ago and loved the Rom itself, however all I have got since is no signal, no imei, and won't read my sim. I've tried everything I can 're flashing Rom, trying to replace efs file (no backup as it got deleted ☹) and tbh I really haven't a clue what else to try.
I did try to refresh a stock nougat Rom through Odin but this now fails due to boot.img ?
So bloody lost.
If anyone has any ideas what to try I would be really greatful.
Cheers
Matt
Mattid11 said:
Hi Guys, hopefully someone will be kind enough to help me out here!
So I flashed my S7 Edge with Superman Rom a week or so ago and loved the Rom itself, however all I have got since is no signal, no imei, and won't read my sim. I've tried everything I can 're flashing Rom, trying to replace efs file (no backup as it got deleted [emoji852]) and tbh I really haven't a clue what else to try.
I did try to refresh a stock nougat Rom through Odin but this now fails due to boot.img ?
So bloody lost.
If anyone has any ideas what to try I would be really greatful.
Cheers
Matt
Click to expand...
Click to collapse
Flash newest Oreo stock frimware via odin and u should get your sim card working.
Most probably u already had oreo installed once before so u cant downgrade back to nougat anymore ,only use oreo
Scorpionea said:
Flash newest Oreo stock frimware via odin and u should get your sim card working.
Most probably u already had oreo installed once before so u cant downgrade back to nougat anymore ,only use oreo
Click to expand...
Click to collapse
Thank you mate! ...seems that the firmware I was flashing was not the newest version so couldn't update the boot to flash. Downloaded most recent Oreo and it flashed through dirty. Had to then flash TWRP and new root before installing would complete past the dreaded 'No Command' with yellow triangle screen! (Probably my fault for dirty flash - but just incase yours doesn't fully wipe if you get same problem as me). Rebooted and Oreo installed no probs and both my signal and IMEI have returned!
Custom ROM flashed and all still working no probs.
Much appreciated for the help!
Mattid11 said:
Thank you mate! ...seems that the firmware I was flashing was not the newest version so couldn't update the boot to flash. Downloaded most recent Oreo and it flashed through dirty. Had to then flash TWRP and new root before installing would complete past the dreaded 'No Command' with yellow triangle screen! (Probably my fault for dirty flash - but just incase yours doesn't fully wipe if you get same problem as me). Rebooted and Oreo installed no probs and both my signal and IMEI have returned!
Custom ROM flashed and all still working no probs.
Much appreciated for the help!
Click to expand...
Click to collapse
[emoji3][emoji3][emoji6]
Good

Categories

Resources