Related
Hi everyone !
I'm actually working in an IT centre (Don't know how to call that, or to traduce to you), and I just got a customer who handed me a Samsung SM-T580 tablet who is FRP locked... I've been searching since 3 days now, trying various methods, even trying a downgrade to other versions, but no luck. I've searched on XDA to see if anyone has got the same problem, but everyone has a different build number, as mine is T580XXU2AQA2. I've seen that if the 3 finals letters/number are PG1, I'm in luck, but if they're PL4, I'm unlucky. But what about QA2 ? And what about the FRP Lock on this build ?
Thanks for help, as I begin to lose hope...
TheHapist said:
Hi everyone !
I'm actually working in an IT centre (Don't know how to call that, or to traduce to you), and I just got a customer who handed me a Samsung SM-T580 tablet who is FRP locked... I've been searching since 3 days now, trying various methods, even trying a downgrade to other versions, but no luck. I've searched on XDA to see if anyone has got the same problem, but everyone has a different build number, as mine is T580XXU2AQA2. I've seen that if the 3 finals letters/number are PG1, I'm in luck, but if they're PL4, I'm unlucky. But what about QA2 ? And what about the FRP Lock on this build ?
Thanks for help, as I begin to lose hope...
Click to expand...
Click to collapse
Before attempting to flash ANY ROM on a T580, you have to enable "OEM unlock" in the /Setup/Developer options. If you don't, the way to unbrick the tablet is by using the Samsung Smart Switch app via a PC.
lewmur said:
Before attempting to flash ANY ROM on a T580, you have to enable "OEM unlock" in the /Setup/Developer options. If you don't, the way to unbrick the tablet is by using the Samsung Smart Switch app via a PC.
Click to expand...
Click to collapse
I can't do anything as I had the tablet already locked :/ I can just access the recovery and the download mode (As well as the normal boot, but it is pointless here).
I already flashed a stock ROM via Odin, and it worked fine as it was the same version in the tablet
TheHapist said:
I can't do anything as I had the tablet already locked :/ I can just access the recovery and the download mode (As well as the normal boot, but it is pointless here).
I already flashed a stock ROM via Odin, and it worked fine as it was the same version in the tablet
Click to expand...
Click to collapse
This one works with the latest build from PL4 to QC2 ( P= 2016, Q= 2017 ) , Android 6 ; not work with Android 7
https://www.youtube.com/watch?v=Xo9uJDDuSxw
Try it, if you can get the Assist then it will work as you can open Chrome to download Google Account Manager to add you own Google account and do the factory reset or just keep it as you are the owner now, taking full control of the tablet.
---------- Post added at 09:17 PM ---------- Previous post was at 09:04 PM ----------
lewmur said:
Before attempting to flash ANY ROM on a T580, you have to enable "OEM unlock" in the /Setup/Developer options. If you don't, the way to unbrick the tablet is by using the Samsung Smart Switch app via a PC.
Click to expand...
Click to collapse
If you can go to Setting and enable the OEM Unlock, you're not FRP lock and in owner account.
FRP ( Factory Reset Protection ) is a secured method from Google prevents anyone to continue in the settings without passing the verified account steps.
Without the previous synced account ID and password, it will keep you in a loop in the setting steps.
Beut said:
This one works with the latest build from PL4 to QC2 ( P= 2016, Q= 2017 ) , Android 6 ; not work with Android 7
https://www.youtube.com/watch?v=Xo9uJDDuSxw
Try it, if you can get the Assist then it will work as you can open Chrome to download Google Account Manager to add you own Google account and do the factory reset or just keep it as you are the owner now, taking full control of the tablet.
---------- Post added at 09:17 PM ---------- Previous post was at 09:04 PM ----------
If you can go to Setting and enable the OEM Unlock, you're not FRP lock and in owner account.
FRP ( Factory Reset Protection ) is a secured method from Google prevents anyone to continue in the settings without passing the verified account steps.
Without the previous synced account ID and password, it will keep you in a loop in the setting steps.
Click to expand...
Click to collapse
Obviously it is to late for the OP to change to "OEM enable" setting. I was merely pointing out the cause of the problem. But it also seemed apparent that the Google account settings are unknown.
I bought a tablet on eBay that had this problem and was able to get it working using Samsung Smart Switch run from a PC connected to the tablet in the download mode.
TheHapist said:
But what about QA2 ? And what about the FRP Lock on this build ?
Thanks for help, as I begin to lose hope...
Click to expand...
Click to collapse
The latest build QC2 from US can bypass easily by Google Account Manager app, I believe it will work with your build.
Beut said:
The latest build QC2 from US can bypass easily by Google Account Manager app, I believe it will work with your build.
Click to expand...
Click to collapse
Yep, it WORKED ! I'm really grateful, I was losing hope. Thank you so much !
The hapist how did you manage to bypass the frp on the tablet I am having the same problem I can’t get it to figure out please help me I have the t 580 Samsung Tab a 10.1 running Android 7.0
El sal said:
The hapist how did you manage to bypass the frp on the tablet I am having the same problem I can’t get it to figure out please help me I have the t 580 Samsung Tab a 10.1 running Android 7.0
Click to expand...
Click to collapse
Watch the youtube video posted by Beut in post #4
TheHapist said:
Hi everyone !
I'm actually working in an IT centre (Don't know how to call that, or to traduce to you), and I just got a customer who handed me a Samsung SM-T580 tablet who is FRP locked... I've been searching since 3 days now, trying various methods, even trying a downgrade to other versions, but no luck. I've searched on XDA to see if anyone has got the same problem, but everyone has a different build number, as mine is T580XXU2AQA2. I've seen that if the 3 finals letters/number are PG1, I'm in luck, but if they're PL4, I'm unlucky. But what about QA2 ? And what about the FRP Lock on this build ?
Thanks for help, as I begin to lose hope...
Click to expand...
Click to collapse
I have same problem QA2 & FRP lock SM-T580 but I have the original owners info but error message still says wait 24 hours?????
Ahlonnae said:
I have same problem QA2 & FRP lock SM-T580 but I have the original owners info but error message still says wait 24 hours?????
Click to expand...
Click to collapse
You see this message because you're still at first page of sign in. Reset it: Power + Volume Up + Home you should get to the Recovery and do a Factory Data Reset.
If you already have original owner information, you shouldn't have any problem of setting the tablet at the step of verifying google account.
I have done FRP bypass on the SM-T580 at least 10 tablets a day, so I can say FRP of Google is a joke. I have to deal with FRP lock everyday and I only need 10 minutes to bypass it.
[EDIT] Damned font I misread FRP for FAP
Posted elsewhere, but as I'm getting rather anxious and as I'm waiting for DBT-T580XXU2BQE4-20170525170357.zip to download... I ended up with a FAP lock. I can't find out if there's any difference from FRP lock - is there any?
Also, about Smart Switch, do the instructions from https://www.sammobile.com/forum/showthread.php?t=34745 apply? Smart Switch tells me that the device is unsupported and I don't get the Device Initialization tab!
Thanks!
[EDIT2] FW downloaded. Tried to use Odin, but there are four options: BL/AP/CP/CSC. Yet the FW package has these entries:
AP_T580XXU2BQE4_CL11316739_QB13491827_REV00_user_low_ship_meta.tar.md5
BL_T580XXU2BQE4_CL11316739_QB13491827_REV00_user_low_ship.tar.md5
CSC_OXA_T580OXA2BQE4_CL11316739_QB13491827_REV00_user_low_ship.tar.md5
HOME_CSC_OXA_T580OXA2BQE4_CL11316739_QB13491827_REV00_user_low_ship.tar.md5
So which one is CP?
You only need to load BL, AP, and CSC, ignore the HOME_CSC, but it seems you're flashing the Android 7 build from Germany which no method works.
You need to downgrade to Android 6, region doesn't matter for the purpose of bypass FRP. When it's done, flash back to your original region in Android 7.
Cellular South PL4 is the build you can downgrade and bypass FRP.
Beut said:
You only need to load BL, AP, and CSC, ignore the HOME_CSC, but it seems you're flashing the Android 7 build from Germany which no method works.
You need to downgrade to Android 6, region doesn't matter for the purpose of bypass FRP. When it's done, flash back to your original region in Android 7.
Cellular South PL4 is the build you can downgrade and bypass FRP.
Click to expand...
Click to collapse
First of all, thank you for your reply indeed.
Yes, I guess it was from Germany since German was its language when it first booted and it was 7.0.
So I'm downloading XAR-T580UEU2APL4-20170407113933.zip (Cellular South PL4) and flashing it with Odin, but once it's done, how do I flash 7 again? Use Odin with the initial BL/AP/CSC that I got?
Again, thank you!
[EDIT] Oh yeah, 6.0 flashed successfully and I'm off FRP lock!!!! Thanks so much... Now I guess I turn on OEM enable in Dev options and flash BL/AP/CSC in Odin?
No need to flash back if you want to keep current US build if it has your prefer language.
However, it's now US tablet, it only update the latest one from US build.
No need to turn on OEM unlock if you know your own Google ID and password.
If you like, flash the Europe build as it has more languages than US one, the same way as you downgrade firmware: load BL, AP, and CSC to Odin.
You're right. I was asking because I thought I'd have lost OTA, which was not the case - device updated OTA to 7.0 so I then proceeded and rooted it again. *Now* OTA is dead, but I'm good.
I was thinking, probably, than on Samsung devices tripping Knox would disable OTA.
Thanks for your reply once more
Tripping Knox doesn’t disable OTA but if the status of firmware is Custom, you won’t be able to update software. I have some tablets which have Knox count more than 1, they update normally because I run stock firmware
Beut said:
Tripping Knox doesn’t disable OTA but if the status of firmware is Custom, you won’t be able to update software. I have some tablets which have Knox count more than 1, they update normally because I run stock firmware
Click to expand...
Click to collapse
Yup! I'm learning by doing
I guess that having an official FW but custom recovery equals to Custom, correct? Which means if I reflash original OTA will be back?
In the setting, About Tablet, Status, if the device status is Official, you have no problem of update via OTA.
Or in Download Mode, if the System Status is Official. I believe your system is Custom if having custom recovery.
Rooted device will become Official if you flash back the stock firmware , however the Knox counting is not rolling back to zero.
Yup, I did know about Knox (that would defeat the purpose, right? ).
If I'm not mistaken flashing original FW will erase data, no? So I'll save it for when there's a decent Oreo ROM out there. Then again, it won't be Original even then so I guess I'm off that road, but I don't think Samsung will be releasing any new OTAs any time soon so there's no meaning in it, surely?
Hi All.
Thank you for any help you might give me in advance with this issue...
Last week, I tried to root the phone with the SM-G930P CF-Autoroot heroqltespr files with Odin found in this forum. I have rooted a few other phones but am no expert. The root after a few attempts failed (verified a few ways), however, some files must have been affected because the phone "identifies" as heroqltespr. Identifies as when I could plug into my PC heroqltespr would be the name. It was not set this way in the obvious name your device areas. I ended up doing a hard reset to clear the phone and other than the ghost naming everything was working fine.
A day or 2 ago Sprint rolled out a new OTA update which the phone installed. Since then the phone was draining battery life. After uninstalling and reinstalling the SD card today, it seems to have tripped a "Security Notice: Unauthorized Actions". That is when the trouble started. The phone started running hot, basically leaking battery power, and was all lagging. I'm assuming the CPU going Ludicrous speed.
Now, I am in a Samsung Splash screen loop, or or a recovery loop. The only thing it does is go into download mode.
I have tried flashing stock firmware, it fails. I've tried flashing with and without the SD or Sim card. Not really sure what I should be doing. The "P" version of my phone seems to be the bastard child of S7s. Any help you guys cold give me would be great. THANK YOU!
The Download Screen Reads:
Odin Mode (High Speed)
Current Binary: Samsung Official
System Status: Custom
FAP Lock: Off
Warranty Void: 8x8
Qualcomm Secure Boot: Enabled
AP SWREV: 85(2,1,1,1,1) K1 S4
I get this error when I try to flash back to stock SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4
Stupid question but is your phone in a case?
Sw rev check fail : [aboot]fused 5 > binary 4
freakboysays said:
Stupid question but is your phone in a case?
Click to expand...
Click to collapse
No it isn't.
I get this error message on the download screen. SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
If you dont mind me asking, did you ever find a way to root the G930P with the 5th bootloader updates? Is it even possible at this point in time? Im new when it comes to rooting but with the amount of time Ive spent browsing the web it seems as if there is nothing. Thanks.
tonysak said:
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
Click to expand...
Click to collapse
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Chanman said:
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Click to expand...
Click to collapse
EDIT: Nevermind...sounds like you aren't on sprint.
lvpre said:
EDIT: Nevermind...sounds like you aren't on sprint.
Click to expand...
Click to collapse
Actually, I am on Sprint, and your directions were awesome, thank you so much! The only thing I had to do was change the line to:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default,dun,mms,supl"
I'm going to put a link to the thread so others can refer to it. https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446
Hi all,
EDIT: I posted this in another thread that was about two years old, where I followed the instructions that caused this: https://forum.xda-developers.com/sp...msung-galaxy-s7-sm-g930p-root-xposed-t3503599
That thread seems dead-ish and if you managed to fix this issue maybe you can help me also. Also what was lvpre's original post before he edited it, and would it apply here?
So the worst has happened - got a new (used) phone from Boost Mobile, tried this guide, and now I can only boot to the "An error has occured while updating the device software. Use the Emergency Recovery function in the Smart Switch PC software." screen. Sometimes it does take me to the original "Download mode" screen.
Now, I should be able to resolve this by flashing the original firmware correct? (As in, the firmware that was installed when it came)? Or does it just need to be firmware from the same date range that has the same bootloader? ODIN will still let me attempt flashing on this screen, but I still get the same error when I try again, which on the Download mode screen showed "SW REV CHECK FAIL : [system]Fused 4 > Binary 1"
Any advice here? My S6 bricked when somehow OEM unlock enabled itself and I can't get around the FRP lock, I will be VERY annoyed if the same thing happens with a NEW phone. If I can't fix this I am never buying Samsung again. Any advice on this is very welcome! I emailed Boost to ask them which firmware is installed (because I'm an idiot and didn't write it down but have never had flashing go this wrong before).
EDIT: Booting to recovery just shows a blue "RECOVERY BOOTING...." for a second in the corner and gives a recovery bootloop, just keeps flashing that.
EDIT: I apparently tried to flash an earlier bootloader/etc through ODIN according to the directions in the post I linked above, and after that I now have this problem. Nobody else in the thread seems to have had this problem, and your post is the closest to anything I can find on this issue. I would be in your eternal debt if you could help me out here.
PLEASE HELP!
EDIT: Theoretically if I can find the original firmware it was on I should be fine, right? Everywhere I read if flashing goes wrong you just flash the original stock on it. I guess worst case scenario I download gigs upon gigs of firmwares for Sprint 930P over the last year and find the one that sticks? Or is the fact my recovery is bootlooping and I can only go into download mode mean I'm bricked?
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
slvmecha said:
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
Click to expand...
Click to collapse
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Switched from Sprint to T-Mobile. Am I out of luck?
lvpre said:
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Click to expand...
Click to collapse
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
jbuck2 said:
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
Click to expand...
Click to collapse
If your phone is uicc [sim] unlocked from sprint... you can try the following.
1. Odin a dec/Jan firmware...like QJ3. But replace the cp slot with the file from the latest u firmware. This is the modem file.
2. When your phone starts, you will receive a pop up message, just hit cancel.
3. Install a package disabler like sabs, bk, adhell2. Disable securitylogagent . This should remove the annoying message. Sabs takes a little effort to setup, but you may need it for the disabler part. Restart after disabling.
4. Pop in sim. See if the additional bands are unlocked.
If you fail, you can always just odin back to a v5 sprint firmware. But don't try it unless you are stuck on the current firmware and your phone is doing nothing. It won't brick your phone.
While the firmware is not downloadable, modem files can downgrade one major update.
This worked for me, but I only have sprint and haven't tried it elsewhere.
Here is an article https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/
Is this triggers the knox counter ?
Not getting much response in the Q & A section, so I'll try here:
So I tried to root using an old youtube tutorial (which I since have learned is a bad idea), now it's stuck in a boot loop. Tried to factory restore from boot menu, didn't work. Took my S7 SM-G930V to Geek Squad at Best Buy, and the Samsung guy basically told me he couldn't fix it and neither would Samsung, as a punishment for trying to root. Maybe if he comes into the ER needing life-saving treatment, I'll tell him I won't help him as punishment for doing one of the stupid things I see every day.... I was just going to throw the damn thing away and buy a new phone, but he pissed me off, so now I want to fix it just to spite him.
Tried kies (said to use smart switch), smart switch (unsupported device), and Odin, all fail. Used the links for the correct firmware here. Tried Verizon's software assistant... also fails. During flash with Odin, it gets about 3 seconds into the bar that goes across the bottom of the phone, then Odin says failed. I'm on android 7.0 snapdragon.
I can get it into download mode, but flashing fails nearly immediately. In download mode, at the top left it says: "ODIN MODE (HIGH SPEED), PRODUCT NAME: SM-G930V, CURRENT BINARY: Samsung Official, SYSTEM STATUS: Official, FRP LOCK: OFF, QUALCOMM SECUREBOOT: ENABLE, AP SWREV: B4(2,1,1,1,1) K1 S3, SECURE DOWNLOAD: ENABLE
Also, I wrote down the Build # and baseband in case they help... Build #: NRD90M.G930VVRS4BRA1 Baseband: G930VVRS4BRA1
Im sure you experts need additional more specific information, so ask away. And thank you!
ERDOC76 said:
Not getting much response in the Q & A section, so I'll try here:
So I tried to root using an old youtube tutorial (which I since have learned is a bad idea), now it's stuck in a boot loop. Tried to factory restore from boot menu, didn't work. Took my S7 SM-G930V to Geek Squad at Best Buy, and the Samsung guy basically told me he couldn't fix it and neither would Samsung, as a punishment for trying to root. Maybe if he comes into the ER needing life-saving treatment, I'll tell him I won't help him as punishment for doing one of the stupid things I see every day.... I was just going to throw the damn thing away and buy a new phone, but he pissed me off, so now I want to fix it just to spite him.
Tried kies (said to use smart switch), smart switch (unsupported device), and Odin, all fail. Used the links for the correct firmware here. Tried Verizon's software assistant... also fails. During flash with Odin, it gets about 3 seconds into the bar that goes across the bottom of the phone, then Odin says failed. I'm on android 7.0 snapdragon.
I can get it into download mode, but flashing fails nearly immediately. In download mode, at the top left it says: "ODIN MODE (HIGH SPEED), PRODUCT NAME: SM-G930V, CURRENT BINARY: Samsung Official, SYSTEM STATUS: Official, FRP LOCK: OFF, QUALCOMM SECUREBOOT: ENABLE, AP SWREV: B4(2,1,1,1,1) K1 S3, SECURE DOWNLOAD: ENABLE
Also, I wrote down the Build # and baseband in case they help... Build #: NRD90M.G930VVRS4BRA1 Baseband: G930VVRS4BRA1
Im sure you experts need additional more specific information, so ask away. And thank you!
Click to expand...
Click to collapse
Maybe try using a different variant of the s7 firmware(like att) and see if it flashes with the prince comsy version of odin.
Edit: nvm guess you figured it out.
Dude believe it or not, I just did the exact same ****ing thing. Somebody please help me. Same phone. Same video. WTF. Please somebody with a heart, help us.
Chances are you flashed the root kernel for Marshmallow. Here is the root kernel for Nougat. https://www.androidfilehost.com/?fid=745425885120714389 Try flashing this and seeing what happens.
---------- Post added at 11:52 AM ---------- Previous post was at 11:50 AM ----------
If that doesn't work, follow this thread https://forum.xda-developers.com/ve...sungpay-norootrequiredtoinstallorrun-t3748755. It will put you on the modified BRA1 build. You'll lose all your data in the process, so I would try flashing the Nougat root kernel in Odin first.
I recently carrier unlocked my SM-G935P (2016 version) from Sprint and brought it over to ATT. All was working fine but wanted to get rid of the Sprint bloatware. After spending most of the day reading threads of flashing, felt confident that I could walk through flashing over to "U" FW. This is my first attempt at flashing and it has FAILED!
Used ODIN 3.12 , and files from UPDATO
It failed after first attempt and then was stuck in boot loop
I then realized that I never set the Developer options before flashing
have tried flashing back to half dozen different version stocks, deep clean flash, and various other work arounds I have seen on here to no avail
Only things that have PASS since the initial FAIL have been when I tried various BL individually, but no change in device
I am at the point that I can only access Download screen and ODIN still recognizes. Other option is the device starts to open in Recovery Boot, Installing Software Update comes up, about 10 lines of code start scrolling then phone goes black.
I'm still OFFICIAL, FRP Lock on, warranty void is 0x0 and AP SWREV is B5(2, 1, 1, 1, 1) K1 S4, and Secure Download is Enabled
I'm way past my comfort and capability in trying to get this even back to stock. Any guidance would be greatly appreciated... Finally broke free of the Sprint chains and on the edge of bricking my phone!
PA_Pyroholic said:
I recently carrier unlocked my SM-G935P (2016 version) from Sprint and brought it over to ATT. All was working fine but wanted to get rid of the Sprint bloatware. After spending most of the day reading threads of flashing, felt confident that I could walk through flashing over to "U" FW. This is my first attempt at flashing and it has FAILED!
Used ODIN 3.12 , and files from UPDATO
It failed after first attempt and then was stuck in boot loop
I then realized that I never set the Developer options before flashing
have tried flashing back to half dozen different version stocks, deep clean flash, and various other work arounds I have seen on here to no avail
Only things that have PASS since the initial FAIL have been when I tried various BL individually, but no change in device
I am at the point that I can only access Download screen and ODIN still recognizes. Other option is the device starts to open in Recovery Boot, Installing Software Update comes up, about 10 lines of code start scrolling then phone goes black.
I'm still OFFICIAL, FRP Lock on, warranty void is 0x0 and AP SWREV is B5(2, 1, 1, 1, 1) K1 S4, and Secure Download is Enabled
I'm way past my comfort and capability in trying to get this even back to stock. Any guidance would be greatly appreciated... Finally broke free of the Sprint chains and on the edge of bricking my phone!
Click to expand...
Click to collapse
With the last ROM I've tried to use, on the device the red text comes up saying SW REV CHECK FAIL : [aboot] Fused 5 > Binary 2
Is there a different ROM I should be trying?
PA_Pyroholic said:
With the last ROM I've tried to use, on the device the red text comes up saying SW REV CHECK FAIL : [aboot] Fused 5 > Binary 2
Is there a different ROM I should be trying?
Click to expand...
Click to collapse
It sounds like you may have gotten sprint's update, not sure tho. Check your software version by going to about phone. If it ends with something like 5BRA1 (the 5 is whats important as that stands for binary ver. 5) then you might not be able to use the U firmware. You can try the U FW from this post: https://forum.xda-developers.com/sprint-s7-edge/how-to/successful-root-g935u-g935uueu4bqd2-t3598647
If that FW does not work, then you will either have to wait til they update the U FW to binary 5 or see if sprint can reload the OS, I would recommend asking them if they can give you an older version of the OS so you can use the U FW.
Fear_The_Fluff said:
It sounds like you may have gotten sprint's update, not sure tho. Check your software version by going to about phone. If it ends with something like 5BRA1 (the 5 is whats important as that stands for binary ver. 5) then you might not be able to use the U firmware. You can try the U FW from this post: https://forum.xda-developers.com/sprint-s7-edge/how-to/successful-root-g935u-g935uueu4bqd2-t3598647
If that FW does not work, then you will either have to wait til they update the U FW to binary 5 or see if sprint can reload the OS, I would recommend asking them if they can give you an older version of the OS so you can use the U FW.
Click to expand...
Click to collapse
I did get the update to 5 unfortunately and am no longer with sprint, paid everything off an account is closed. I did some more digging and realized many mistakes yesterday. I tried the latest 'U' FW (binary 4), it failed, and then I tried the latest 'P' FW (binary 5) right afterwards and it failed... But I didn't cycle the phone in between attempts so of course it was going to fail. Ended up reflashing with the latest 'P', and went through the easy, "just say yes to everything" set up and all the bloatware reloaded onto it. Reflashed and wiped device, and was careful this time... 90% of the bloatware I wanted was gone. Package disabled the rest. Only thing I can't seem to get rid of is the Sprint logos on start up.
After stumbling my way through this first attempt, I'll do better research next time!
Sent from my SM-G935P using Tapatalk
PA_Pyroholic said:
I recently carrier unlocked my SM-G935P (2016 version) from Sprint and brought it over to ATT. All was working fine but wanted to get rid of the Sprint bloatware. After spending most of the day reading threads of flashing, felt confident that I could walk through flashing over to "U" FW. This is my first attempt at flashing and it has FAILED!
Used ODIN 3.12 , and files from UPDATO
It failed after first attempt and then was stuck in boot loop
I then realized that I never set the Developer options before flashing
have tried flashing back to half dozen different version stocks, deep clean flash, and various other work arounds I have seen on here to no avail
Only things that have PASS since the initial FAIL have been when I tried various BL individually, but no change in device
I am at the point that I can only access Download screen and ODIN still recognizes. Other option is the device starts to open in Recovery Boot, Installing Software Update comes up, about 10 lines of code start scrolling then phone goes black.
I'm still OFFICIAL, FRP Lock on, warranty void is 0x0 and AP SWREV is B5(2, 1, 1, 1, 1) K1 S4, and Secure Download is Enabled
I'm way past my comfort and capability in trying to get this even back to stock. Any guidance would be greatly appreciated... Finally broke free of the Sprint chains and on the edge of bricking my phone!
Click to expand...
Click to collapse
Unfortunately, your phone is on the newest firmware, B5. You'll only be able to flash one of the latest sprint firmwares to get your phone to work. All the other carriers and U firmware are still running an older binary boot. You may also need the special version of ODIN...you can probably find it in the same forum about installing the U firmware. But if you download the latest sprint firmware, your phone should boot again.
So long story short I was intoxicated and for some reason disabled OEM in debugging then sometime later I restarted my tablet to get the frp binary locked. It has a custom rom with twrp I absolutely need the data off of this tablet and the only way I see is to reinstall the default os through Odin but that wipes the device I need a method to get the data off of the tablet or a method to bypass frp entirely it would be mighty appreciated if I could have some help
Why don't you try a backup in TWRP?
Reinstalling the stock firmware with Odin won't wipe the device.
slop_me said:
So long story short I was intoxicated and for some reason disabled OEM in debugging then sometime later I restarted my tablet to get the frp binary locked. It has a custom rom with twrp I absolutely need the data off of this tablet and the only way I see is to reinstall the default os through Odin but that wipes the device I need a method to get the data off of the tablet or a method to bypass frp entirely it would be mighty appreciated if I could have some help
Click to expand...
Click to collapse
It's difficult to say if you can keep your data. The binary FRP lock is quite different that the average FRP lock that's associated with the Google sign in. Usually whenever you trip the binary lock it's because some firmware was installed such as a Root or a ROM that was flawed or invalid. It's an overstacking of binaries and therefore you get a "Custom Binaries Blocked by FRP Lock" notification. I've had this problem on another varient of the Tab A, the Galaxy Tab A6 SM-T580. I have found about four diferent variations of this. You may not have turned off OEM because in Binary lock it will act like you have. Possible reason to think that is the way it acts in Download Mode where you can't seem to flash anything especially the official firmware. Sound familiar?
Version 1. If you try to go to Recovery you get redirected to a screen similar to the Download Mode. In the upper left are red lettered "Custom Binaries Blocked by FRP Lock.. Download Mode is accessable but won't initialize when trying to flash stock firmware. Binary 4 FRP Unlock file was accepted and flashed in by Odin3. Stock firmware installs afterwards.
Version 2. Device is stuck in bootloop. "Custom Binaries Blocked by FRP Lock" appears on Logo screen. Recovery and Download Modes are so far, useless. Binary 4 FRP Unlock used, no positive results. Binary U 4 used. Positive result. Stock firmware flashed in afterwards.
Version 3. "Custom Binaries Blocked by FRP Lock" appears on Download Mode which either stalls right after or fails to initialize. Binary 4 FRP Unlock and Binary U 4 yeild no positive results. (This ones on it's way to me).
Version 4. "Custom Binaries Blocked by FRP Lock appears on Recovery Mode. Download Mode useless. I'm currently following this one.
Solution: I don't know if the one I have will work, they may be device specific. Research for a "SM-T280 Binary 4 FRP Unlock" which I couldn't yet find.
Casper Young said:
It's difficult to say if you can keep your data. The binary FRP lock is quite different that the average FRP lock that's associated with the Google sign in. Usually whenever you trip the binary lock it's because some firmware was installed such as a Root or a ROM that was flawed or invalid. It's an overstacking of binaries and therefore you get a "Custom Binaries Blocked by FRP Lock" notification. I've had this problem on another varient of the Tab A, the Galaxy Tab A6 SM-T580. I have found about four diferent variations of this. You may not have turned off OEM because in Binary lock it will act like you have. Possible reason to think that is the way it acts in Download Mode where you can't seem to flash anything especially the official firmware. Sound familiar?
Version 1. If you try to go to Recovery you get redirected to a screen similar to the Download Mode. In the upper left are red lettered "Custom Binaries Blocked by FRP Lock..
Solution: I don't know if the one I have will work, they may be device specific. Research for a "SM-T280 Binary 4 FRP Unlock"
But I couldn't find one.
Here's my post, it may help.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Click to expand...
Click to collapse
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
ashyx said:
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
Click to expand...
Click to collapse
I hate to argue with you but that wasn't so easy with mine. While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. Trial and error followed. The solve was first I had to flash in the Binary FRP Unlock and then I could flash in the firmware. With another device the owner tried the Binary Frp Unlock which didn't fix it. Later he flashed in the U4 Binary and that worked for him. I passed the info along to some others in the same predicament and it helped them. So I don't know what to tell you but what you're stating is not always applicable.
Casper Young said:
I hate to argue with you but that wasn't so easy with mine. While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. Trial and error followed. The solve was first I had to flash in the Binary FRP Unlock and then I could flash in the firmware. With another device the owner tried the Binary Frp Unlock which didn't fix it. Later he flashed in the U4 Binary and that worked for him. I passed the info along to some others in the same predicament and it helped them. So I don't know what to tell you but what you're stating is not always applicable.
Click to expand...
Click to collapse
Trust me, I have 3 of these devices. I've bricked them, frp locked them every possible way during development for this device.
The T580 is a different device and may be more difficult to bypass if and only if FRP has kicked in because of a device reset.
However for EVERY Samsung device that has simply had non stock software installed the only fix that's required is to install the stock firmware.
This is the case on all the Samsung devices I own and I have quite a few from lollipop to Pie.
ashyx said:
Trust me, [not happening!]I have 3 of these devices. I've bricked them, frp locked them every possible way during development for this device. [Well, umm. No, you haven't. And take a wild guess how many devices I have, like that matters.]
The T580 is a different device and may be more difficult to bypass if and only if FRP has kicked in because of a device reset. [Everytime you turn off the device it resets.]
However for EVERY Samsung device that has simply had non stock software installed the only fix that's required is to install the stock firmware. [You obviously have difficulties comprehending that I said otherwise]
This is the case on all the Samsung devices I own and I have quite a few from lollipop to Pie.
Click to expand...
Click to collapse
Wow, you're on a roll ain't ya? Hey ASHYX, dont misjudge me because of my stats you see here. Over a decade ago I was stacking ROMs into my HTC-G1. 3 decades ago I was an Electrical Engineer and Sonar Operator in the Navy. Let me tell you point blank, you're mistaken! Normally you would think you can just flash in stock OTA firmware into the device via Odin3 and you get to return to normal. Well that wasn't the solve for this. This was a new one to me also. If you think you're so right on what you say I'll be more than happy to point you in the direction of some XDA visitors, two of which are still Binary FRP locked. You can try telling them what you just told me and they'll probably call you a blooming idiot. No offense but you could try reading it properly which might help.
I said, [QOUTE] " While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. [END QOUTE]
Take my word for it, the method you stated was already tried AND DID NOT WORK!
If you want to insist you're all that, here ya go, these people need your expertise in development
https://forum.xda-developers.com/ga...frp-locked-t3772512/post80420061#post80420061
Data loss when flashing stock firmware.
ashyx said:
Reinstalling the stock firmware with Odin won't wipe the device.
Click to expand...
Click to collapse
That depends on which stock firmware you're using. Typically what you get OTA (over the air) is the same as the 4File Official Stock Firmware. These are the 4 files that go into each section when using Odin3 to flash firmware. BL is for the Bootloader which controls security, start-up and recovery. AP is Android Partitioning, CP is Cellular Processor. Now let's talk about the CSC. file. The 4File contains two CSC files, one is listed as HOME CSC. If you flash the CSC file you will lose your App data. If you flash the HOME CSC you do not lose your App data.
Casper Young said:
That depends on which stock firmware you're using. Typically what you get OTA (over the air) is the same as the 4File Official Stock Firmware. These are the 4 files that go into each section when using Odin3 to flash firmware. BL is for the Bootloader which controls security, start-up and recovery. AP is Android Partitioning, CP is Cellular Processor. Now let's talk about the CSC. file. The 4File contains two CSC files, one is listed as HOME CSC. If you flash the CSC file you will lose your App data. If you flash the HOME CSC you do not lose your App data.
Click to expand...
Click to collapse
ashyx said:
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
Click to expand...
Click to collapse
Thank you for confirming I won't loss any data upon installing the original ROM I did just have a custom ROM installed I was super concerned that I would lose all the data upon installing the original ROM thank you so much <3
slop_me said:
Thank you for confirming I won't loss any data upon installing the original ROM I did just have a custom ROM installed I was super concerned that I would lose all the data upon installing the original ROM thank you so much <3
Click to expand...
Click to collapse
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
ashyx said:
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
Click to expand...
Click to collapse
Yeah it was just stock lollipop with a root. Will that cause an issue or am I good to continue?
ashyx said:
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
Click to expand...
Click to collapse
Props to you thanks for the knowledge it worked flawlessly I mean kinda half way through it did say erasing and I kinda **** the bed and got scared because I really needed the data off of there but my man you are right just flashing stock ROM worked flawlessly everywhere online says it will wipe the device but it didn't. Thank you so much for your fantastic help <3