ok, so i tried rooting and it totally screwed up my phone...
i tried unrooting by installing stock firmware through odin, and this is the error i got.
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> FAIL! Model dismatch fail
<OSM> All threads completed. (succeed 0 / failed 1)
make sure your phone is in download mode. once your in download mode plug in your phone into a usb connection to your computer. make sure to also use the stock odin that you can find on xda and you can also just download the firmware
HTML:
http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-ph1-odin-files-t3458890
load up all the 3 files normally and it will wipe the phone off completely to stock.
normally if the ids don't match that means the firwmare you downloaded is not the correct version for your handset.
Looks like you're either putting old firmware on or incorrect firmware.
Which model S7 do you have and which firmware are you installing?
Related
softbrick my s4 but still able to access download mode
I have TWRP backups( boot.emmc.win.md5,cache.ext4.win.md5,data.ext4.win.md5,efs.ext4.win.md5,recovery.emmc.win.md5,sd-ext.ext4.win.md5,system.ext4.win.md5)
I got the idea of installing TWRP in download again since it's not booting up in recovery mode
but it's keeps saying FAIL!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
tried changing ports? Try ports that are directly connected into the motherboard
Sent from my GT-I9500 using Tapatalk 4 Beta
Paras Lehana said:
tried changing ports? Try ports that are directly connected into the motherboard
Sent from my GT-I9500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Is usb debugging enabled on the phone, closed Kies (also in windows tray manager), what odin version are u using (try 3.04 cause 3.07 is buggy),
try downloading TWRP again maybe its corrupted.
terryspanky said:
softbrick my s4 but still able to access download mode
I have TWRP backups( boot.emmc.win.md5,cache.ext4.win.md5,data.ext4.win.md5,efs.ext4.win.md5,recovery.emmc.win.md5,sd-ext.ext4.win.md5,system.ext4.win.md5)
I got the idea of installing TWRP in download again since it's not booting up in recovery mode
but it's keeps saying FAIL!
Removed!!
Added!!
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
Click to expand...
Click to collapse
Do u have a proper root?
Edit : u can try rooting again and then flash recovery
.
gee2012 said:
Is usb debugging enabled on the phone, closed Kies (also in windows tray manager), what odin version are u using (try 3.04 cause 3.07 is buggy),
try downloading TWRP again maybe its corrupted.
Click to expand...
Click to collapse
changing the usb port do the trick.
Now tried to root and install openrecovery-twrp-2.6.0.0-jfltexx/CSB_signed_Fusion3_EUR_0325_V2 from odin and it says pass on all of them.
But when I'm trying to boot up in teamwin, the twrp logo will show up then it will turn black screen, vibrate a moment and automatically restarts to samsung galaxy s4 screen....
I can't seem to make twrm to work...
I think I have messed up my kernel when I install Abyss kernel for gt-I9505 then it bricked after I install I9505XXUBMF4_modems.tar via mobile odin..
any suggestions?
I'm downloading the PDA for my country and It's taking some time to get finished.
Hello guys,
I am trying to install CWM recovery. As you certainly know the easiest way is by flashing the file via Odin.
Thing is I'm having a hard time trying to do what might look easy at first glance.
When opening Odin 3.09 as administrator, it is able to recognize my rooted 9505 (I'm on Samsung stock firmware) whenever I'm in download mode, but after selecting the corresponding CWM file and clicking Start, I get the following:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
I tried flashing the PIT partition file for my phone model, but I also get this:
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
I tried flashing the files independently and both at the same time. It always failed.
What can i do? I really don't know what else should be done to fix this.
I'm getting
Secure Check Fail: apnhlos
when I try to flash any PDA-compatible file in Odin.
What does that even mean? Android sure has some of the most cryptic error messages I have ever seen.
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
squabbi said:
Have you tried using Odin 3.15?
Sent from my HTC One using Tapatalk 4
Click to expand...
Click to collapse
Which version is that? Can you provide a link?
Alphadan said:
Which version is that? Can you provide a link?
Click to expand...
Click to collapse
Oh my bad. I was mistaking it for another program.
The version I used to root my pho e was Odin 3.07
http://samsung-updates.com/Odin307.zip
Also I presume you have the Samsung usb drivers installed?
Sent from my HTC One using Tapatalk 4
Don't forget to exit, or better yet uninstall, Kies... This can affect flashing too...
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Butterfly11 said:
Did you use the original samsung cable for flashing?Using another cable often cause issues.
Click to expand...
Click to collapse
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Same probleme here
Alphadan said:
The thing is that i have managed to actually root the phone via Odin using CF Auto root ( I had to click "Start" twice, but i ended up successfully rooting the phone)
I just don't know what I'm doing wrong this time around that it's preventing it from flashing files
Any more ideas? Cheers.
Click to expand...
Click to collapse
Same problem here, the only difference is I was just doing a firmware update via Odin and something went wrong (I don't know what). The phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" but Kies is not recognizing the phone.
Please help!
Hello,
I tried flashing a Modem (MH5) in Mobile Odin, but it hanged at
----- Modem #2 -----
- Clearing ...
for 20 minutes. I turned the phone off and wanted to try again, but the phone doesn't finish booting. It boots for a minute and I can see the boot animation of my rom, but then it reboots on its own.
Then I wanted to flash the modem with the normal Odin but that also doesn't work.
This is what it says:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I still get into the recovery, but there are no flashable modems for the i9505.
What do I do now?
Okay, I found a PIT file from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Flashing it worked fine.
After that I tried to flash the modem again, but it failed. This time with a different error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/003> File analysis..
<ID:1/008> File analysis..
<ID:1/008> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> modem.bin
<ID:1/008> NAND Write Start!!
<ID:1/008> Transmission Complete..
<ID:1/008> Now Writing.. Please wait about 2 minutes
<ID:1/008> Receive Response from boot-loader
<ID:1/008> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 2)
thedoginthewok said:
Okay, I found a PIT file from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Flashing it worked fine.
After that I tried to flash the modem again, but it failed. This time with a different error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/003> File analysis..
<ID:1/008> File analysis..
<ID:1/008> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> modem.bin
<ID:1/008> NAND Write Start!!
<ID:1/008> Transmission Complete..
<ID:1/008> Now Writing.. Please wait about 2 minutes
<ID:1/008> Receive Response from boot-loader
<ID:1/008> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 2)
Click to expand...
Click to collapse
port 3 and port 8???
what is happening? change usb port and disable kies and antivirus from task manager, reset odin. repeat procedure
Do you have any device connected to your pc other than your android? If Odin recognized more than 1 com, probably there are other device connected via USB or kies is interfering with odin.
I had the same problem. I tried different USB port and newer version of odin and that did the job.
Sent from my GT-I9505G using xda app-developers app
It had nothing to do with the USB Port.
After flashing the PIT file failed the phone displayed the message "Firmware upgrade encountered an issue . Please select recovery mode in Kies & try again".
Then I downloaded a stock Rom and flashed it in combination with the PIT File on the same USB port as before and it succeeded. After that I flashed TWRP again and I could restore my backup. It was a long process, but my phone is working fine again.
After restoring my backup I could also flash the new modem and now I have better reception.
Got the same situation (Odin flashing failure, PIT error, ended up with the "firmware upgrade encountered an issue. please select recovery mode in Kies & try again") trying to flash a new modem.
When I change the cable AND usb port, everything goes OK. Run Odin (the same 3.07), connect my i9505 with the "firmware upgrade encountered an issue. please select recovery mode in Kies & try again" and just flash the modem again, it works now.
USB
thedoginthewok said:
It had nothing to do with the USB Port.
Click to expand...
Click to collapse
Mine was a USB issue. Tried rebooting my laptop, phone, changed usb port, then finally changed USB cable and it worked ok.
Flashed PIT file with firmware.
SOLVED!
SOLVED changing usb cable and port. used the original cable with another usb port and it worked fine.
I have Galaxy S4 (i9505). Custom ROM, rooted (Flashed by Odin).
Then i tried to flash recovery TWRP. Found my version of TWRP recovery on official site, downloaded an install for odin.
Then tried to flash and THIS happened - FAIL. I started to panic, tried to start again, and it's failed again, because PIT wasn't found
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
After that I didn't know really what to do. and tried to flash firmware stock, but it has same result. No PIT.
So then i found the PIT file from reading the forum, and downloaded it for my i9505, and flash it with and without firmware stock. That's the log:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> Removed!!
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Added!
It seems like phone every time disconnects while PIT is flashing. Even Re-Partition is checked on.
Sorry for my english, if I said something grammatically wrong. Please help!
did you try with a other cable, cuz it looks like the phone disconnect (Like you said).
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Follow this http://forum.xda-developers.com/showthread.php?p=41072377
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Thx i will try it!
THANK YOU SO MUCH!
I did it! I have uninstall my KIES from computer with Samsung driver.
Then i downloaded one of firmware stock from that link, it was 4 file installation in Odin. Restarted my computer and then tried to flash it.
It works! Thank you for my unbricked phone
hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone
Hi,
download a stock firmware from updato. In Odin select all of the files. For CSC file use the normal CSC file (not HOME_CSC).
In addition, select re-partition and flash.
Odin gets the PIT information from the CSC file.
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ok so I tried that and still this keeps coming up I read something about that the phone is in read only mode do it cant write anything to it not even odin I flashed the wrong twrp it wasn't for my international phone and now I cant do anything with it it don't even have a recovery on it now please help and thank you for the idea tho but didn't work
I tried it again and this is coming up now
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
and now this I don't know why this is going on its killing me
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1
tried the new odin and this happened
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
Have you downloaded the correct firmware from updato.com? If you have g935f you need a 'f' version of the firmware.
Sorry, I have no further idea.
flash again and use your country home CSC i did that and works like a charm
I have downloaded the g935f and the uk csc BTU and still not working
Maybe you try a different usb cable and flash on another pc?
ive tried everything the phone has put itself in read only mode I need to know how to do a boot trap install or something if anyone know how to do that
Have you tried with re partition and NAND erase all ticked in odin? If not, try it. And please use latest version of odin. 3.11 or above.
ya ive tried everything I can think of it just cant get pass the pit file check an then my phone restart to the galaxy s7 edge screen an says on that I flashed twrp-3.0.2-0-hero2qltechn.img and it was that, that messed my phone up coz it was the wrong one I was ment to flash twrp-3.0.2-4-hero2lte.img and then I went to flash the the right one it said the I didn't have a pit partition so I tried the latest firmware for my phone (UK EVR an the pit files) I also used just the csc files but everything ive tried has gave me the above errors ive ready messed up this time
You can download the .pit file for your device: HERE
thank you joku1981 but I already have one but ill try this one
can someone tell me how to use the pit file tab bit coz I still cant get it to work still all the above odin errors
hi
have u fixed ur peoblem i have same
Did u try a restore to factory firmware with smartswitch? With ur IMEI and SN maybe it works