Database Users

Odin fail again and again

Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Mh...... odd
Sent from my LG-LS970 using xda app-developers app

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Sorry, but you can't mention the name of banned roms here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.

luqman98 said:
Sorry, but you can't mention the name of banned roms" here. Anyway, try to install USB drivers for Galaxy Y here. If you can boot your phone, enable USB Debugging in Settings> Applications> Development. Make sure to download stock firmware from here: http://forum.xda-developers.com/showthread.php?t=1465800 and flash it via Odin.
Click to expand...
Click to collapse
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia

devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
Banned roms are ROMs that are banned by xda members. It is caused by violating xda rules. Example, Jellyblast rom were banned because Avijit (creator) linking to a download which took you to an ad site and Nemesis is banned because containing warez and steal other's work.

better to install kies first
devprakash said:
What you mean by "Banned roms"
2. Samsung USB driver already installed.
i already downloaded stock firmware " S5360_DDLA3_ODDLA2_DDLA2 (revision 1) " Asia
Click to expand...
Click to collapse
If u have latest samsung drivers, then u should not get error... i'll advice to download latest kies from the samsung site.... install it... & then try odin..
i faced this problem long ago, & solved by this way...
as u know, dont use pit file.. dont clck on repartition...
best luck

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Use newer versions of Odin like Odin 3.0+
And make sure adb.exe/Kies.exe/Kiesxxxxxxxxxx.exe r not running

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
Question:
Is this your first time flashing Odin?
Yes: Then first install KIES, but your stock driver is preferable (you know.. the one that comes with the box) to avoid incompatibilities, the install odin; i personally use Odin3 v1.85 and it has never failed me once.. and I have tried almost every ROM and kernel for Y. Close KIES before flashing.
No, I have done this before: Did you try another USB port or another computer? Assuming you didnt interchange the 3 files when flashing, did you remove the battery and let the fone discharge for atleast 1 minute and also did you remove the SD card. Sometimes there are files and script from your custom Roms that messes with odin so remove SD card prior to flashing.
There is another method you can do, I myself have used this twice to get out of a quite sticky softbrick... but I do not recommend it, Using a totoro pit file. If all other method fails this will MAY get you out
1. after placing PDA, MODEM and CSC... put the totoro pit file on "PIT", LEAVE BOOTLOADER ALONE!!!
2. Click repartition and NOTHING ELSE!!!
3. Click start
4. Hope for the best:fingers-crossed::fingers-crossed::fingers-crossed:

devprakash said:
Things started after rooting my galaxy y.
I root galaxy y. After that i was trying to update this into jellyblast. But it stuck at the middle of it after reboot i found that mobile drop down menu also gone. Now i only have one way to go. Format mobile. But when i tried wipe data it return me an error E: not able to mount.
Now i was trying to restore it via odin3 V1.85 but it stuck there also.
I am getting an error.
"<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
"
what to do??
I am not using kies etd.
Click to expand...
Click to collapse
did u install drivers of ur phone and started odin as administrator

As stated by a user above that make sure adb, kies ,any software that uses ur phobes usb is not running....
In odin make sure re-partition is disabled and dont use a pit file
All u need to use is pda,csc,phone,
Not even bootloader
Check whether the usb is nit interupted by anything during the flash...
Sent from my GT-S5360 using xda app-developers app

[Q] Odin not working (there is no PIT partition)

Hello,
I tried flashing a Modem (MH5) in Mobile Odin, but it hanged at
----- Modem #2 -----
- Clearing ...
for 20 minutes. I turned the phone off and wanted to try again, but the phone doesn't finish booting. It boots for a minute and I can see the boot animation of my rom, but then it reboots on its own.
Then I wanted to flash the modem with the normal Odin but that also doesn't work.
This is what it says:
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I still get into the recovery, but there are no flashable modems for the i9505.
What do I do now?

Okay, I found a PIT file from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Flashing it worked fine.
After that I tried to flash the modem again, but it failed. This time with a different error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/003> File analysis..
<ID:1/008> File analysis..
<ID:1/008> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> modem.bin
<ID:1/008> NAND Write Start!!
<ID:1/008> Transmission Complete..
<ID:1/008> Now Writing.. Please wait about 2 minutes
<ID:1/008> Receive Response from boot-loader
<ID:1/008> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 2)

thedoginthewok said:
Okay, I found a PIT file from here:
http://forum.xda-developers.com/showthread.php?t=2265477
Flashing it worked fine.
After that I tried to flash the modem again, but it failed. This time with a different error:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:1/008> Odin v.3 engine (ID:8)..
<ID:0/003> File analysis..
<ID:1/008> File analysis..
<ID:1/008> SetupConnection..
<ID:0/003> SetupConnection..
<ID:1/008> Initialzation..
<ID:1/008> Get PIT for mapping..
<ID:1/008> Firmware update start..
<ID:1/008> modem.bin
<ID:1/008> NAND Write Start!!
<ID:1/008> Transmission Complete..
<ID:1/008> Now Writing.. Please wait about 2 minutes
<ID:1/008> Receive Response from boot-loader
<ID:1/008> Complete(Write) operation failed.
<ID:0/003> Can't open the serial(COM) port.
<ID:0/008> Added!!
<OSM> All threads completed. (succeed 0 / failed 2)
Click to expand...
Click to collapse
port 3 and port 8???
what is happening? change usb port and disable kies and antivirus from task manager, reset odin. repeat procedure
Do you have any device connected to your pc other than your android? If Odin recognized more than 1 com, probably there are other device connected via USB or kies is interfering with odin.

I had the same problem. I tried different USB port and newer version of odin and that did the job.
Sent from my GT-I9505G using xda app-developers app

It had nothing to do with the USB Port.
After flashing the PIT file failed the phone displayed the message "Firmware upgrade encountered an issue . Please select recovery mode in Kies & try again".
Then I downloaded a stock Rom and flashed it in combination with the PIT File on the same USB port as before and it succeeded. After that I flashed TWRP again and I could restore my backup. It was a long process, but my phone is working fine again.
After restoring my backup I could also flash the new modem and now I have better reception.

Got the same situation (Odin flashing failure, PIT error, ended up with the "firmware upgrade encountered an issue. please select recovery mode in Kies & try again") trying to flash a new modem.
When I change the cable AND usb port, everything goes OK. Run Odin (the same 3.07), connect my i9505 with the "firmware upgrade encountered an issue. please select recovery mode in Kies & try again" and just flash the modem again, it works now.

USB
thedoginthewok said:
It had nothing to do with the USB Port.
Click to expand...
Click to collapse
Mine was a USB issue. Tried rebooting my laptop, phone, changed usb port, then finally changed USB cable and it worked ok.
Flashed PIT file with firmware.

SOLVED!
SOLVED changing usb cable and port. used the original cable with another usb port and it worked fine.

[Help Needed] Soft-Bricked my phone. i9505

So, my phone was giving me problems, too much battery consumption, the keyboard would sometimes lag and i would get weird words and phrases... so i though, well, i have an android! why not making the most of it and trying a custom rom? Geez, i tried installing first CWM since i had no recovery mode besides the stock one, and i bricked the phone. How? dunno, i tried twice in two different computers and all the times i would get an error, Odin would start writing.... and stop, then the phone disconects and connects back (windows makes that sound) and now it seems that i broke the partition tables. I found a .pit file for my phone ("CSB_signed_Fusion3_EUR_0325_V2"), and i have the stock rom ("I9505XXUFNB9_I9505NEEFNB2_I9505XXUFNB9_HOME.tar") (im downloading also one from sammobile just in case). But.. nope, odin doesn´t want to work, i just get the following
Without the .pit file
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
Click to expand...
Click to collapse
With .pit file
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/009> Removed!!
<ID:0/009> Added!!
Click to expand...
Click to collapse
So, since ive tried in different USB ports, and different computers, and im getting the same resoult, i guess that my problem lies with the usb cable, ill try to get one tomorrow (its 2.08 here in sweden) but im posting in case there are other solutions. Btw, ive also tried Heimdall Suite (it was already bricked so... why not) and i get another error. Like if the computer couldnt communicate with the phone. YES i do have installed the drivers. Yes ive also use zadig to change/install the drivers with no solution.
Thanks for your help. *insert banana here as sign of my gratitude*
Yes, i wont mess with my phone again, ever.
Additional info: Galaxy s4 i9505 "north countries/baltic/north" edition (from sweden, tele3)

You probably just a need an other usb cable. Don't worry, you will get your phone up and running again.

sm-g935f (no pit partition) please helpppppp!!!!!!!

hi I messed up too I went to install a new rom but I had to flash a new twrp recovery and I flashed the wrong one and I cant boot in to recovery no more and then I tried to put the right twrp recovery back on there and it gave me a odin error {no pit partition} so I downloaded the sm-g935f pit file and tried to use the pit tab and got a new odin error {Complete(Write) operation failed} iv tried different usb ports 2.0 and 3.0 and tried different cables I need help someone please save me phone

Hi,
download a stock firmware from updato. In Odin select all of the files. For CSC file use the normal CSC file (not HOME_CSC).
In addition, select re-partition and flash.
Odin gets the PIT information from the CSC file.

<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ok so I tried that and still this keeps coming up I read something about that the phone is in read only mode do it cant write anything to it not even odin I flashed the wrong twrp it wasn't for my international phone and now I cant do anything with it it don't even have a recovery on it now please help and thank you for the idea tho but didn't work

I tried it again and this is coming up now
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)

and now this I don't know why this is going on its killing me
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1

tried the new odin and this happened
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1205)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)

Have you downloaded the correct firmware from updato.com? If you have g935f you need a 'f' version of the firmware.
Sorry, I have no further idea.

flash again and use your country home CSC i did that and works like a charm

I have downloaded the g935f and the uk csc BTU and still not working

Maybe you try a different usb cable and flash on another pc?

ive tried everything the phone has put itself in read only mode I need to know how to do a boot trap install or something if anyone know how to do that

Have you tried with re partition and NAND erase all ticked in odin? If not, try it. And please use latest version of odin. 3.11 or above.

ya ive tried everything I can think of it just cant get pass the pit file check an then my phone restart to the galaxy s7 edge screen an says on that I flashed twrp-3.0.2-0-hero2qltechn.img and it was that, that messed my phone up coz it was the wrong one I was ment to flash twrp-3.0.2-4-hero2lte.img and then I went to flash the the right one it said the I didn't have a pit partition so I tried the latest firmware for my phone (UK EVR an the pit files) I also used just the csc files but everything ive tried has gave me the above errors ive ready messed up this time

You can download the .pit file for your device: HERE

thank you joku1981 but I already have one but ill try this one

can someone tell me how to use the pit file tab bit coz I still cant get it to work still all the above odin errors

hi
have u fixed ur peoblem i have same

Did u try a restore to factory firmware with smartswitch? With ur IMEI and SN maybe it works

Getting stuck right out of the gate! Odin3 V3.12 Fails

Hello,
I was wondering if anyone could help me out with getting this S8+ SM-G955U (US ver) rooted. I dl'd & followed the instructions to a T but when I try to dl the firmware, Odin Fails and the phone says Secure Check Failed in red letters.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Erase...
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be much appreciated!

Regodog said:
Hello,
I was wondering if anyone could help me out with getting this S8+ SM-G955U (US ver) rooted. I dl'd & followed the instructions to a T but when I try to dl the firmware, Odin Fails and the phone says Secure Check Failed in red letters.
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Erase...
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help would be much appreciated!
Click to expand...
Click to collapse
What firmware was you trying to flash? What was the build, is it branded?

I dl'd the S8_SamPWND_4Files_Firmware_Package that was on --> https://forum.xda-developers.com/galaxy-s8/development/samsung-galaxy-s8-root-snapdragon-t3659305
Since knowing pretty much nothing about Rooting but have squeaked by in the past...I Googled How to root your Sam S8+ and things started going down hill.